Overlapped FFT based energy detection has been proposed as a signal detection scheme in dynamic spectrum access. The overlapped FFT scheme increases the number of FFT frames to reduce the variance of squared noise and improves the detection performance. As the FFT frames are overlapped, correlation values between the frames affect to the detection performance. This paper proposes the window functions which decrease the correlation values between adjacent FFT bins. Numerical results obtained through computer simulation show that novel window functions generated by upsampling a Hamming window improves the detection performance by 0.09. However, this window function suffers more from adjacent channel interference than a conventional window. Therefore, this paper also proposes a two step detection scheme to achieve higher detection performance and to avoid the influence of the adjacent channel signal. Numerical results also indicate that the proposed scheme improves the detection performance and reduces the effect from the adjacent channel signal.

In this paper we describe and experimentally validate a dual-band digital predistortion (DPD) model we propose that takes account of the intermodulation and harmonic distortion produced when the center frequencies of input bands have a harmonic relationship. We also describe and experimentally validate our proposed novel dual-band power amplifier (PA) linearization architecture consisting of a single feedback loop employing a dual-band mixer. Experiment results show that the DPD linearization the proposed model provides can compensate for intermodulation and harmonic distortion in a way that the conventional two-dimensional (2-D) DPD approach cannot. The proposed feedback architecture should make it possible to simplify analog-to-digital converter (ADC) design and eliminate the time lag between different feedback paths.

Since the birth of astrophysics, astronomers have been using free-space optics to analyze light falling on Earth. In the future however, thanks to the advances in photonics and nanoscience/nanotechnology, much of the manipulation of light might be carried out using not optics but confined waveguides, or circuits, on a chip. This new generation of instruments will be not only extremely compact, but also powerful in performance because the integration enables a greater degree of multiplexing. The benefit is especially profound for space- or air-borne observatories, where size, weight, and mechanical reliability are of top priority. Recently, several groups around the world are trying to integrate ultra-wideband (UWB), low-resolution spectrometers for millimeter-submillimeter waves onto microchips, using superconducting microelectronics. The scope of this Paper is to provide a general introduction and a review of the state-of-the-art of this rapidly advancing field.

Recently, a next-generation heterodyne mixer detector---a hot electron bolometer (HEB) mixer employing a superconducting microbridge---has gradually opened up terahertz-band astronomy. The surrounding state-of-the-art technologies including fabrication processes, 4 K cryostats, cryogenic low-noise amplifiers, local oscillator sources, micromachining techniques, and spectrometers, as well as the HEB mixers, have played a valuable role in the development of super-low-noise heterodyne spectroscopy systems for the terahertz band. The current developmental status of terahertz-band HEB mixer receivers and their applications for spectroscopy and astronomy with ground-based, airborne, and satellite telescopes are presented.

A four-pixel-array superconducting transition-edge sensor (TES) microcalorimeter with a mushroom-shaped absorber was fabricated for the energy dispersive spectroscopy performed on a transmission electron microscope. The TES consists of a bilayer of Au/Ti with either a 50-nm or 120-nm thickness. The absorber of 5.0,$mu$m thick is made from a Au layer and its stem is deposited in the center of the TES surface. A Ta$_{2}$O$_{5}$ insulating layer of 100-nm thickness is inserted between the overhang region of the absorber and the TES surface. A selected pixel of the TES microcalorimeter was operated for the detection of Np L X-rays emitted from an $^{241}$Am source. A response of the TES microcalorimeter to L X-rays was obtained by analyzing detection signal pulses with using the optimal filter method. An energy resolution was obtained to be 33,eV of the full width at half maximum value at 17.751,keV of Np L$_{eta 1}$ considering its natural width of 13.4,eV. Response to L X-rays emitted from a mixture source of $^{238}$Pu, $^{239}$Pu and $^{241}$Am was obtained by operating the selected pixel of the TES microcalorimeter. Major L X-ray peaks of progeny elements of $alpha$ decay of Pu and Am isotopes were clearly identified in the obtained energy spectrum. The experimental results demonstrated the separation of $^{241}$Am and plutonium isotopes by L X-ray spectroscopy.

We report a real time method to monitor the chemical reaction in microdroplets, which contain an organic dye, 5(6)-carboxynaphthofluorescein and a CdSe/ZnS quantum dot using fluorescence spectra. Especially, the relationship between the droplet size and the reaction rate of the two reagents was investigated by changing an injection speed.

This paper presents a synchronization mechanism to effectively implement the lock and barrier protocols in a decentralized manner through explicit message passing. In the proposed solution, a simple and efficient synchronization control mechanism is proposed to support queued synchronization without contention. By using state-of-the-art Application-Specific Instruction-set Processor (ASIP) technology, we embed the synchronization functionality into a baseline processor, making the proposed mechanism feature ultra-low overhead. Experimental results show the proposed synchronization achieves ultra-low latency and almost ideal scalability when the number of processors increases.

To immobilize cytochrome $c$ (cyt.,$c$) on ITO electrode with keeping its direct electron transfer (DET) activity, 10-carboxydecylphosphonic acid (10-CDPA) self-assembled monolayer (SAM) film was formed on ITO electrode. After 100 times washing process with exchanging phosphate buffer saline solution in the cell to fresh one, extit{in situ} slab optical waveguide (SOWG) absorption spectral measurement proved that about 80% of cyt.,$c$ immobilized on 10-CDPA modified ITO electrode was adsorbed on ITO electrode. Additionally SOWG spectral change of cyt.,$c$ between oxidized and reduced forms was observed with setting the ITO electrode potential at 0.3 and $-$0.3,V vs. Ag/AgCl, respectively showing DET reaction between cyt.,$c$ and ITO electrode occurred. About 30% of a monolayer coverage was estimated from the coulomb amount in the surface area of oxidation and reduction peaks on cyclic voltammetry (CV) data. CV peak current maintained 84% for ITO electrode modified with 10-CDPA SAM film after 60,min continuous scan with 0.1,V/sec from 0.3 and $-$0.3,V vs. Ag/AgCl.

A serial ATA PHY fabricated in a 0.15-µm CMOS process performs the serial ATA operation in an asynchronous transition by using large variation in the reference clock. This technique calibrates a transmission signal frequency by utilizing the received signal. This is achieved by calibrating the divide ratio of a spread-spectrum clock generator (SSCG). This technique enables a serial ATA PHY to use reference oscillators with a production-frequency tolerance of less than 400ppm, i.e., higher than the permissible TX frequency variations (i.e., 350ppm). The calibrated transmission signal achieved a total jitter of 3.9ps.

In this paper, resource-efficient multiple description coding (MDC) multicast is investigated in cognitive radio networks with the consideration of imperfect spectrum sensing and imperfect channel feedback. Our objective is to maximize the system goodput, which is defined as the total successfully received data rate of all multicast users, while guaranteeing the maximum transmit power budget and the maximum average received interference constraint. Owing to the uncertainty of the spectrum state and the non-closed-form expression of the objective function, it is difficult to solve the problem directly. To circumvent this problem, a pretreatment is performed, in which we first estimate the real spectrum state of primary users and then propose a Gaussian approximation for the probability density functions of transmission channel gains to simplify the computation of the objective function. Thereafter, a two-stage resource allocation algorithm is presented to accomplish the subcarrier assignment, the optimal transmit channel gain to interference plus noise ratio (T-CINR) setting, and the transmit power allocation separately. Simulation results show that the proposed scheme is able to offset more than 80% of the performance loss caused by imperfect channel feedback when the feedback error is not high, while keeping the average interference on primary users below the prescribed threshold.

The fast multipole method (FMM) for N-body simulations is attracting much attention since it requires minimal communication between computing nodes. We implemented hardware pipelines specialized for the FMM on an FPGA device, the GRAPE-9. An N-body simulation with 1.6×107 particles ran 16 times faster than that on a CPU. Moreover the particle-to-particle stage of the FMM on the GRAPE-9 executed 2.5 times faster than on a GPU in a limited case.

Most recent work on cooperative spectrum sensing using cognitive radios has focused on issues involving the sensing channels and seemed to ignore those involving the reporting channels. Furthermore, no research has treated the effect of correlated composite Rayleigh-lognormal fading, also known as Suzuki fading, in cognitive radio. This paper proposes a technique for reuse of shadowed CRs, discarded during the sensing phase, as amplified-and-forward (AF) diversity relays for other surviving CRs to mitigate the effects of such fading in reporting channels. A thorough analysis of and a closed-form expression for the outage probability of the resulting cooperative AF diversity network in correlated composite Rayleigh-lognormal fading channels are presented in this paper. In particular, an efficient solution to the “PDF of sum-of-powers” of correlated Suzuki-distributed random variables using moment generating function (MGF) is proposed.

This letter studies the problem of cooperative spectrum sensing in wideband cognitive radio networks. Based on the basis expansion model (BEM), the problem of estimation of power spectral density (PSD) is transformed to estimation of BEM coefficients. The sparsity both in frequency domain and space domain is used to construct a sparse estimation structure. The theory of L1/2 regularization is used to solve the compressed sensing problem. Simulation results demonstrate the effectiveness of the proposed method.

This paper proposes a speech watermarking method based on the concept of formant tuning. The characteristic that formant tuning can improve the sound quality of synthesized speech was employed to achieve inaudibility for watermarking. In the proposed method, formants were firstly extracted with linear prediction (LP) analysis and then embedded with watermarks by symmetrically controlling a pair of line spectral frequencies (LSFs) as formant tuning. We evaluated the proposed method by two kinds of experiments regarding inaudibility and robustness compared with other methods. Inaudibility was evaluated with objective and subjective tests and robustness was evaluated with speech codecs and speech processing. The results revealed that the proposed method could satisfy both inaudibility and robustness that required for speech watermarking.

This paper shows a method to find a linear transformation that reduces the number of variables to represent a given incompletely specified index generation function. It first generates the difference matrix, and then finds a minimal set of variables using a covering table. Linear transformations are used to modify the covering table to produce a smaller solution. Reduction of the difference matrix is also considered.

In this paper, we propose an efficient method for computing the weight spectrum of LDPC convolutional codes based on circulant matrices of quasi-cyclic codes. In the proposed method, we reduce the memory size of their parity-check matrices with the same distance profile as the original codes, and apply a forward and backward tree search algorithm to the parity-check matrices of reduced memory. We show numerical results of computing the free distance and the low-part weight spectrum of LDPC convolutional codes of memory about 130.

In this paper, sequential prediction is studied. The typical assumptions about the probabilistic model in sequential prediction are following two cases. One is the case that a certain probabilistic model is given and the parameters are unknown. The other is the case that not a certain probabilistic model but a class of probabilistic models is given and the parameters are unknown. If there exist some parameters and some models such that the distributions that are identified by them equal the source distribution, an assumed model or a class of models can represent the source distribution. This case is called that specifiable condition is satisfied. In this study, the decision based on the Bayesian principle is made for a class of probabilistic models (not for a certain probabilistic model). The case that specifiable condition is not satisfied is studied. Then, the asymptotic behaviors of the cumulative logarithmic loss for individual sequence in the sense of almost sure convergence and the expected loss, i.e. redundancy are analyzed and the constant terms of the asymptotic equations are identified.

Hands-free communications between cellular phones must be robust enough to withstand echo-path variation, and highly nonlinear echoes must be suppressed at low cost, when acoustic echo cancellation or suppression is applied to them. This paper proposes a spectrum-selective nonlinear echo suppression (SS-ES) approach as a solution to these issues. SS-ES is characterized by the selection of either a spectrum of the residual signal from an adaptive filter or a spectrum of the sending input signal depending on the amount of linear echo cancellation in an adaptive filter. Compared to conventional methods, the objective evaluation results of the SS-ES approach show an improvement of approximately 0.8-2.2dB, 0.23-2.39dB, and 0.26-0.50 in average echo return loss enhancement (ERLE), average root-mean-square log-spectral distortion (RMS-LSD), and the perceptual evaluation of speech quality (PESQ) value, respectively, under echo-path variation and double-talk conditions.

This paper proposes a new algorithm to encode the spectral envelope for G.729.1 more accurately. It applies the normalized least-mean- square (NLMS) algorithm to each subband energy of the modified discrete cosine transform (MDCT) in the time-domain alias cancellation (TDAC) of G.729.1. By utilizing the estimation error of subband energies by means of NLMS, allocated bit reduction for spectral envelope coding is achieved. The saved bits are then reused to improve the spectral envelope estimation and thus enhance the sound quality. Experimental results confirm that the proposed algorithm improves the sound quality under both clean and packet loss conditions.

This paper proposes an adaptive band activity ratio control (ABC) with cascaded energy allocation (CEA) scheme to improve end-to-end spectral efficiency for two-hop amplify-and-forward orthogonal frequency division multiplexing relay systems under transmit energy constraint. Subchannel pairing (SP) based spectrum mapping maps spectral components transmitted over high gain subchannels in the source-to-relay link onto high gain subchannels of the relay-to-destination link to improve the spectral efficiency. However, SP suffers from a frame efficiency reduction due to the notification of information of spectral component order. To compensate for the deficiency of SP, the proposed scheme employs dynamic spectrum control with ABC in which spectral components are mapped onto subchannels having high channel gain in each link, while band activity ratio (BAR) is controlled to an optimal value, which is smaller than 1, so that all spectral components are transmitted over relatively high gain subchannels of the two links. To further improve the performance, energy allocation at the source node and the relay node is serially conducted based on convex optimization, and BAR is controlled to improve discrete-input continuous-output memoryless channel capacity at the relay node. In the proposed scheme, since only information of BAR needs to be notified, the notification overhead is drastically reduced compared to that in SP based spectrum mapping. Numerical analysis confirms that the proposed ABC combined with CEA significantly reduces the required notification overhead while achieving almost the same frame error rate performance compared with the SP based scheme.