We propose an Adjustable Parallel TCP (AP-TCP) which is a new scheme to control the aggregate throughput of parallel TCP flows. The AP-TCP can adjust the aggregate throughput to be any desired level irrespective of the parallel size (the number of parallel TCP flows). To adjust the aggregate throughput, we modify the increment factor of each parallel TCP flow to K2/N2 where N is the number of parallel TCP flows and K is a value equivalent to any desired level for the aggregate throughput. Once K is given, the AP-TCP attempts to have K times more bandwidth than a single TCP flow when they are competing on the same network path. Another feature of the AP-TCP is its self-adjustment scheme. There is no central coordination or control overhead for parallel TCP flows. We analyze the model of the AP-TCP theoretically and evaluate it by using NS-2 simulation.

We propose a new Clock and Data Recovery (CDR) circuit for burst-mode applications. It can recover clock signals after two data transitions and endure long sequence of consecutive identical digits. Two Digital Phase Aligners (DPAs), triggered by rising or falling edges of input data, recover clock signals, which are then combined by a phase interpolator. This configuration reduces the RMS jitters of the recovered clock by 30% and doubles the maximum run length compared to a previously reported DPA CDR. A prototype chip is demonstrated with 0.18-µm CMOS technology. Measurement results show that the chip operates without any bit error for 1.25-Gb/s 231-1 PRBS with 200-ppm frequency offset and recovers clock and data after two clock cycles.

Recently, cyber attacks have become a serious hindrance to the stability of Internet. These attacks exploit interconnectivity of networks, propagate in an instant, and have become more sophisticated and evolutionary. Traditional Internet security systems such as firewalls, IDS and IPS are limited in terms of detecting recent cyber attacks in advance as these systems respond to Internet attacks only after the attacks inflict serious damage. In this paper, we propose a hybrid intrusion forecasting system framework for an early warning system. The proposed system utilizes three types of forecasting methods: time-series analysis, probabilistic modeling, and data mining method. By combining these methods, it is possible to take advantage of the forecasting technique of each while overcoming their drawbacks. Experimental results show that the hybrid intrusion forecasting method outperforms each of three forecasting methods.

A motion refinement algorithm is proposed to enhance motion compensated noise reduction (MCNR) efficiency. Instead of the vector with minimum distortion, the vector with minimum distance from motion vectors of neighboring blocks is selected as the best motion vector among vectors which have distortion values within the range set by noise level. This motion refinement finds more accurate motion vectors in the noisy sequences. The MCNR with the proposed algorithm maintains the details of an image sequence very well without blurring and joggling. And it achieves 10% bit-usage reduction or 0.5 dB objective quality enhancement in subsequent video coding.

This paper presents an algorithm for the robust watermarking of 3D polygonal mesh models. The proposed algorithm embeds the watermark into a 2D image extracted from the 3D model, rather than directly embedding it into 3D geometry. The proposed embedding domain, i.e., the 2D image, is devised to be robust against the attacks like mesh simplification which severely modifies the vertices and connectivity while preserving the appearance of the model. The watermark-embedded model is obtained by using a simple vertex perturbation algorithm without iterative optimization. Two exemplary watermark applications using the proposed methods are also presented: one is to embed several bits into 3D models and the other is to detect only the existence of a watermark. The experimental results show that the proposed algorithm is robust against similarity transform, mesh simplification, additive Gaussian noise, quantization of vertex coordinates and mesh smoothing, and that its computational complexity is lower than that of the conventional methods.

Today, users themselves are becoming subjects of content creation. The fact that blog, wiki, and UCC have become very popular shows that users want to participate to create and modify digital content. Users who participate in composing content also want to have their copyrights on their modification parts. Thus, a copyright protection system for the content which can be modified by multiple users is required. However, the conventional DRM (Digital Rights Management) systems like OMA DRM are not suitable for the modifiable content because they do not support the content created and modified by different users. Therefore in this paper, we propose a new copyright protection system which allows each modifier of the content created and modified by multiple users to have one's own copyright. We propose data formats and protocols, and analyze the proposed system in terms of the correctness and security. Performance evaluation in the view of response time shows that the proposed system is 2 to 18 times shorter than other comparative schemes.

Due to the computational complexity of the optimum maximum likelihood detector (OMD) growing exponentially with the number of users, suboptimum techniques have received significant attention. We have proposed the particle swarm optimization (PSO) for the multiuser detection (MUD) in asynchronous multicarrier code division multiple access (MC-CDMA) system. The performance of PSO based MUD is near optimum, while its computational complexity is far less than OMD. Performance of PSO-MUD has also been shown to be better than that of genetic algorithm based MUD (GA-MUD) at practical SNR.

This paper proposes a closed form solution to L2-sensitivity minimization of second-order state-space digital filters. Restricting ourselves to the second-order case of state-space digital filters, we can express the L2-sensitivity by a simple linear combination of exponential functions and formulate the L2-sensitivity minimization problem by a simple polynomial equation. As a result, the L2-sensitivity minimization problem can be converted into a problem to find the solution to a fourth-degree polynomial equation of constant coefficients, which can be algebraically solved in closed form without iterative calculations.

A dispersion diagram is useful in interpreting the characteristics of a periodic structure. In particular, the fast-wave region, where the wave is radiating, and the slow-wave region, where the wave is guided, can be determined from the dispersion diagram. An electronically-controlled composite right/left-handed (CRLH) transmission line (TL) was previously proposed and utilized as a leaky-wave (LW) antenna operating in the fast-wave region. However, since a guided-wave application operates in the slow-wave region, it is meaningful to study slow-wave effects of the proposed TL. In this paper, the dispersion diagram is used to investigate the slow-wave factor (SWF), which is necessary to understand the fast/slow-wave operations. Furthermore, the frequency characteristics are measured to find the cut-off frequencies in the LH and RH regions. Based on experimental results, it is observed at a fixed frequency, 2.6-GHz, that the phase of a proposed 6-cell structure can be changed by up to 280 in the LH slow-wave region.

For battery-powered electronic products, one way to extend battery life is to use a versatile step-up/step-down DC-DC converter. A new versatile step-up/step-down switched-capacitor-based converter structure is proposed, and its efficiency is analyzed. In the step-down case, the efficiency is the same as, or even better than the efficiency of linear regulators.

We propose an algorithm for finding heavy hitters in terms of cardinality (the number of distinct items in a set) in massive traffic data using a small amount of memory. Examples of such cardinality heavy-hitters are hosts that send large numbers of flows, or hosts that communicate with large numbers of other hosts. Finding these hosts is crucial to the provision of good communication quality because they significantly affect the communications of other hosts via either malicious activities such as worm scans, spam distribution, or botnet control or normal activities such as being a member of a flash crowd or performing peer-to-peer (P2P) communication. To precisely determine the cardinality of a host we need tables of previously seen items for each host (e.g., flow tables for every host) and this may infeasible for a high-speed environment with a massive amount of traffic. In this paper, we use a cardinality estimation algorithm that does not require these tables but needs only a little information called the cardinality summary. This is made possible by relaxing the goal from exact counting to estimation of cardinality. In addition, we propose an algorithm that does not need to maintain the cardinality summary for each host, but only for partitioned addresses of a host. As a result, the required number of tables can be significantly decreased. We evaluated our algorithm using actual backbone traffic data to find the heavy-hitters in the number of flows and estimate the number of these flows. We found that while the accuracy degraded when estimating for hosts with few flows, the algorithm could accurately find the top-100 hosts in terms of the number of flows using a limited-sized memory. In addition, we found that the number of tables required to achieve a pre-defined accuracy increased logarithmically with respect to the total number of hosts, which indicates that our method is applicable for large traffic data for a very large number of hosts. We also introduce an application of our algorithm to anomaly detection. With actual traffic data, our method could successfully detect a sudden network scan.

In multiple-input multiple-output (MIMO) cellular networks, certain schedulers have two independent phases: the first selects a group of users based on the scheduler criterion, and the second assigns the selected users to the transmit antennas by using an assignment scheme taking into consideration capacity maximization. Other schedulers directly select among the available channels between users and the base station in a centralized way. The schedulers of the first category can be implemented with lower complexity compared with the schedulers of the second category. For the first category, we propose three near-optimal assignment schemes with low complexities. We conducted a simulation in which the mobility of users was considered that demonstrated the superior performance of our assignment schemes. Furthermore, we analytically demonstrate their efficiency.

This paper proposes a new minimum BER (MBER) criterion precoding method that is robust to imperfect channel state information (CSI) for MIMO-OFDM mobile communications. The proposed MBER precoding aims to minimize BER of the maximum likelihood detection (MLD), on the condition that the transmitter can obtain only imperfect CSI owing to channel estimation and quantization errors of the feedback CSI. The proposed scheme controls its precoding parameters under a transmit power constraint by minimizing an upper bound of BER which is derived from the pairwise error probability and averaged with respect to the CSI error. In contrast with a conventional power allocation MBER precoding method that is also robust to the CSI error, the proposed scheme does not make any assumption on the precoding parameters so as to reduce complexity. Thus, it is expected to outperform the conventional scheme at the cost of higher complexity. Computer simulations demonstrate that the proposed precoding method outperforms a conventional nonrobust MBER precoder and the conventional robust power allocation MBER precoding method when the amount of the CSI error is not considerable.

We present a method for the objective quality evaluation of noise-reduced speech in wideband speech communication services, which utilize speech with a wider bandwidth (e.g., 7 kHz) than the usual telephone bandwidth. Experiments indicate that the amount of residual noise and the distortion of speech and noise, which are quality factors, influence the perceived quality degradation of noise-reduced speech. From the results, we observe the principal relationships between these quality factors and perceived speech quality. On the basis of these relationships, we propose a method that quantifies each quality factor in noise-reduced speech by analyzing signals that can be measured and assesses the overall perceived quality of noise-reduced speech using values of these quality factors. To verify the validity of the method, we perform a subjective listening test and compare subjective quality of noise-reduced speech with its estimation. In the test, we use various types of background noise and noise-reduction algorithms. The verification results indicate that the correlation between subjective quality and its objective estimation is sufficiently high regardless of the type of background noise and noise-reduction algorithm.

Conventional narrowband interference (NBI) rejection algorithms often assumed perfect pseudo-noise (PN) code synchronization. The functions of NBI rejection and code tracking are performed separately and independently by an adaptive filter and a code tracking loop, respectively. This paper presents two new receiver structures for direct sequence spread spectrum (DS/SS) systems, one operates in coherent mode and the other operates in noncoherent mode. Both receivers are designed to suppress NBI and minimize tracking jitter. Numerical results show that the proposed coherent receiver performs as good as the conventional receiver that uses an LMS NBI rejection filter with zero tracking jitter. The noncoherent receiver, when compared with the coherent one, suffers less than 3 dB degradation for bit error probability smaller than 10-3.

In the acoustic echo canceller (AEC), the step-size parameter of the adaptive filter must be varied according to the situation if double talk occurs and/or the echo path changes. We propose an AEC that uses a sub-adaptive filter. The proposed AEC can control the step-size parameter according to the situation. Moreover, it offers superior convergence compared to the conventional AEC even when the double talk and the echo path change occur simultaneously. Simulations demonstrate that the proposed AEC can achieve higher ERLE and faster convergence than the conventional AEC. The computational complexity of the proposed AEC can be reduced by reducing the number of taps of the sub-adaptive filter.

Comparison of the electromagnetic characteristics of a monopole-type wire antenna (MTWA) and an inverted-F wire antenna (IFWA) is performed based on numerical and experimental results. Radiation characteristics, when the handset model is located in the vicinity of a head phantom or in free space, are also investigated. The gain of 8.27 dBi is achieved at 3.4 GHz for the MTWA with the head phantom.

In order for the interconnect effects due to process-induced variations to be applied to the designs in 0.13 µm and below, it is necessary to determine and characterize the realistic interconnect worstcase models with high accuracy and speed. This paper proposes new statistically-based approaches to the characterization of realistic interconnect worstcase models which take into account process-induced variations. The Effective Common Geometry (ECG) and Accumulated Maximum Probability (AMP) algorithms have been developed and implemented into the new statistical interconnect worstcase design environment. To verify this statistical interconnect worstcase design environment, the 31-stage ring oscillators are fabricated and measured with UMC 0.13 µm Logic process. The 15-stage ring oscillators are fabricated and measured with 0.18 µm standard CMOS process for investigating its flexibility in other technologies. The results show that the relative errors of the new method are less than 1.00%, which is two times more accurate than the conventional worstcase method. Furthermore, the new interconnect worstcase design environment improves optimization speed by 29.61-32.01% compared to that of the conventional worstcase optimization. The new statistical interconnect worstcase design environment accurately predicts the worstcase and bestcase corners of non-normal distribution where conventional methods cannot do well.

This paper investigates migration effects of parallel genetic algorithms (GAs) on the line topology of heterogeneous computing resources. Evolution process of parallel GAs is evaluated experimentally on two types of arrangements of heterogeneous computing resources: the ascending and descending order arrangements. Migration effects are evaluated from the viewpoints of scalability, chromosome diversity, migration frequency and solution quality. The results reveal that the performance of parallel GAs strongly depends on the design of the chromosome migration in which we need to consider the arrangement of heterogeneous computing resources, the migration frequency and so on. The results contribute to provide referential scheme of implementation of parallel GAs on heterogeneous computing resources.

In this paper, we propose memory and performance optimized architecture to accelerate the operation speed of adaptive deblocking filter for H.264/JVT/AVC video coding. The proposed deblocking filter executes loading/storing and filtering operations with only 192 cycles for 1 macroblock. Only 244 internal buffers and 3216 internal SRAM are adopted for the buffering operation of deblocking filter with I/O bandwidth of 32 bit. The proposed architecture can process the filtering operation for 1 macroblock with less filtering cycles and lower memory sizes than some conventional approaches of realizing deblocking filter. The efficient hardware architecture is implemented with novel data arrangement, hybrid filter scheduling and minimum number of buffer. The proposed architecture is suitable for low cost and real-time applications, and the real-time decoding with 1080HD (19201088@30 fps) can be easily achieved when working frequency is 70 MHz.