In this paper, we propose a robust parameters estimation algorithm for channel coded systems based on the low-density parity-check (LDPC) code over fading channels with impulse noise. The estimated parameters are then used to generate bit log-likelihood ratios (LLRs) for a soft-inputLDPC decoder. The expectation-maximization (EM) algorithm is used to estimate the parameters, including the channel gain and the parameters of the Bernoulli-Gaussian (B-G) impulse noise model. The parameters can be estimated accurately and the average number of iterations of the proposed algorithm is acceptable. Simulation results show that over a wide range of impulse noise power, the proposed algorithm approaches the optimal performance under different Rician channel factors and even under Middleton class-A (M-CA) impulse noise models.

Nano crystalline zinc oxide (ZnO) is deposited by room temperature atomic layer deposition (RT-ALD) using dimethylzinc and a plasma excited humidified Ar without thermal treatments. The TEM observation indicated that the deposited ZnO films were crystallized with grain sizes of ∼20 nm on Si in the course of the RT-ALD process. The crystalline ZnO exhibited semiconducting characteristics in a thin film transistor, where the field-effect mobility was recorded at 1.29×10-3cm2/V·s. It is confirmed that the RT deposited ZnO film has an anticorrosion to hot water. The water vapor transmission rate of 8.4×10-3g·m-2·day-1 was measured from a 20 nm thick ZnO capped 40 nm thick Al2O3 on a polyethylene naphthalate film. In this paper, we discuss the crystallization of ZnO in the RT ALD process and its applicability to flexible electronics.

While online communities are important platforms for various social activities, many online communities fail to survive, which motivates researchers to investigate factors affecting the growth and survival of online communities. We comprehensively examine the effects of a wide variety of social network features on the growth and survival of communities in Reddit. We show that several social network features, including clique ratio, density, clustering coefficient, reciprocity and centralization, have significant effects on the survival of communities. In contrast, we also show that social network features examined in this paper only have weak effects on the growth of communities. Moreover, we conducted experiments predicting future growth and survival of online communities utilizing social network features as well as contents and activity features in the communities. The results show that prediction models utilizing social network features as well as contents and activity features achieve approximately 30% higher F1 measure, which evaluates the prediction accuracy, than the models only using contents and activity features. In contrast, it is also shown that social network features are not effective for predicting the growth of communities.

We propose online feedback path modeling with a pre-inverse type active noise control (PIANC) system to track the fluctuation stably in the feedback path. The conventional active noise control (ANC) system with online feedback path modeling (FBPM) filter bases filtered-x least mean square (FxLMS) algorithm. In the FxLMS algorithm, the error of FBPM influences a control filter, which generates an anti-noise, and secondary path modeling (SPM) filter. The control filter diverges when the error is too large. Therefore, it is difficult for the FxLMS algorithm to track the feedback path without divergence. On the other hand, the proposed approach converges stably because the FBPM filter's error does not influence a control filter on the PIANC system. Thus, the proposed method can reduce noise while tracking the feedback path. This paper verified the effectiveness of the proposed method by convergence analysis, computer simulation, and implementation of a digital signal processor.

This paper describes a novel 4K 120fps (frames per second) real-time HEVC (High Efficiency Video Coding) encoder for high-frame-rate video encoding and transmission. Motion portrayal problems such as motion blur and jerkiness may occur in video scenes containing fast-moving objects or quick camera panning. A high-frame-rate solves such problems and provides a more immersive viewing experience that can express even the fast-moving scenes without discomfort. It can also be used in remote operation for scenes with high motion, such as VAR (Video Assistant Referee) systems in sports. Real-time encoding of high-frame-rate videos with low latency and temporal scalability is required for providing such high-frame-rate video services. The proposed encoder achieves full 4K/120fps real-time encoding, which is twice the current 4K service frame rate of 60fps, by multichip configuration with two encoder LSI. Exchange of reference picture data near a spatially divided slice boundary provides cross-chip motion estimation, and maintains the coding efficiency. The encoder supports temporal-scalable coding mode, in which it output stream with temporal scalability transmitted over one or two transmission paths. The encoder also supports the other mode, low-delay coding mode, in which it achieves 21.8msec low-latency processing through motion vector restriction. Evaluation of the proposed encoder's multichip configuration shows that the BD-bitrate (the average rate of bitrate increase), compared to simple slice division without inter-chip transfer, is -2.86% at minimum and -2.41% on average in temporal-scalable coding mode. The proposed encoder system will open the door to the next generation of high-frame-rate UHDTV (ultra-high-definition television) services.

This paper introduces a method to estimate latent traffic from its origin to destination from the link packet loss rate and traffic volume. In addition, we propose a method for the joint optimization of routing and link provisioning based on the estimated latent traffic. Observed traffic could deviate from the original traffic demand and become latent when the traffic passes through congested links because of changes in user behavioral and/or applications as a result of degraded quality of experience (QoE). The latent traffic is actualized by improving congested link capacity. When link provisioning is based on observed traffic, actual traffic might cause new congestion at other links. Thus, network providers need to estimate the origin-destination (OD) original traffic demand for network planning. Although the estimation of original traffic has been well studied, the estimation was only applicable for links. In this paper, we propose a method to estimate latent OD traffic by combining and expanding techniques. The method consists of three steps. The first step is to estimate the actual OD traffic and loss rate from the actual traffic and packet loss rate of the links. The second step is to estimate the latent traffic demand. Finally, using this estimated demand, the link capacity and routing matrix are optimized. We evaluate our method by simulation and confirm that congestion could be avoided by capacity provisioning based on estimated latent traffic, while provisioning based on observed traffic retains the congestion. The combined method can avoid congestion with an increment of 23% compared with capacity provisioning only. We also evaluated our method's adaptability, i.e., the ability to estimate the required parameter for the estimations using fewer given values, but values obtained in the environment.

Network service providers need to appropriately design systems and carefully configuring the settings and parameters to ensure that the systems keep running consistently and deliver the desired services. This can be a heavy and error-prone task. Intent-based system design methods have been developed to help with such tasks. These methods receive service-level requirements and generate service configurations to fulfill the given requirements. One such method is search-based system design, which can flexibly generate systems of various architectures. However, it has difficulty dealing with constraints on the quantitative parameters of systems, e.g., disk volume, RAM size, and QoS. To deal with practical cases, intent-based system design engines need to be able to handle quantitative parameters and constraints. In this work, we propose a new intent-based system design method based on search-based design that augments search states with quantitative constraints. Our method can generate a system that meets both functional and quantitative service requirements by combining a search-based design method with constraint checking. Experimental results show that our method can automatically generate a system that fulfills all given requirements within a reasonable computation time.

With the development and spread of Internet of Things technologies, various types of data for IoT applications can be generated anywhere and at any time. Among such data, there are data that depend heavily on generation time and location. We define these data as spatio-temporal data (STD). In previous studies, we proposed a STD retention system using vehicular networks to achieve the “Local production and consumption of STD” paradigm. The system can quickly provide STD for users within a specific location by retaining the STD within the area. However, this system does not take into account that each type of STD has different requirements for STD retention. In particular, the lifetime of STD and the diffusion time to the entire area directly influence the performance of STD retention. Therefore, we propose an efficient diffusion and elimination control method for retention based on the requirements of STD. The results of simulation evaluation demonstrated that the proposed method can satisfy the requirements of STD, while maintaining a high coverage rate in the area.

This paper reports the results of a new test on what types of failure cause falls in the stock prices of telecommunication service providers. This analysis of stock price is complementary to our previous one on market share. A clear result of our new test is that the type of failure causing falls in stock price is different from the type causing decline in market share. Specifically, the previous study identified frequent failures as causes of decline in market share, while the current study indicates large failures affecting many users as causes of falls in stock price. Together, these analyses give important information for reliability designs of telecommunications networks.

We propose two simple weight calculation methods (primary method and enhanced method), that estimate approximated phase plane from a few antenna phase and calculate weights of all antenna elements, for wireless backhaul systems that utilize millimeter wave band massive antenna arrays. Such systems are expected to be used instead of optical fiber for connecting many small cell base stations (SCBSs) to the core network, and supporting the rapid deployment of SCBSs. However, beamforming with massive antenna arrays requires many analog-digital converters (ADCs) and incurs the issue of implementation complexity. The proposed methods overcome the problem by reducing the number of ADCs. Computer simulations clarify the appropriate layout and the number of ADCs connected to antenna elements; the effectiveness of the proposed methods is confirmed by evaluations with measured channel state information (CSI) in propagation experiments on a wireless backhaul system. Experimental verifications on the case of calculating the weight of 200 elements from the phases of just 9 elements show that the array gain degradation from ideal (the case in which the phases of all elements are used estimation) with both methods is less than 0.4 dB in the direct wave dominant environment. In addition, the enhanced method holds the array gain degradation to under 0.8dB in an environment existing reflected waves. These results show that the proposed methods can attain high accuracy beamforming while reducing ADC number.

This paper studies a harvested power-oriented simultaneous wireless information and power transfer (SWIPT) scheme over multiple-input multiple-output (MIMO) interference channels in which energy harvesting (EH) circuits exhibit nonlinearity. To maximize the power harvested by all receivers, we propose an algorithm to jointly optimize the transmit beamforming vectors, power splitting (PS) ratios and the receive decoding vectors. As all variables are coupled to some extent, the problem is non-convex and hard to solve. To deal with this non-convex problem, an iterative optimization method is proposed. When two variables are fixed, the third variable is optimized. Specifically, when the transmit beamforming vectors are optimized, the transferred objective function is the sum of several fractional functions. Non-linear sum-of-ratios programming is used to solve the transferred objective function. The convergence and advantage of our proposed scheme compared with traditional EH circuits are validated by simulation results.

In this paper, we describe a post-processing technique having high extraction efficiency (ExE) for de-biasing and de-correlating a random bitstream generated by true random number generators (TRNGs). This research is based on the N-bit von Neumann (VN_N) post-processing method. It improves the ExE of the original von Neumann method close to the Shannon entropy bound by a large N value. However, as the N value increases, the mapping table complexity increases exponentially (2N), which makes VN_N unsuitable for low-power TRNGs. To overcome this problem, at the algorithm level, we propose a waiting strategy to achieve high ExE with a small N value. At the architectural level, a Hamming weight mapping-based hierarchical structure is used to reconstruct the large mapping table using smaller tables. The hierarchical structure also decreases the correlation factor in the raw bitstream. To develop a technique with high ExE and low cost, we designed and fabricated an 8-bit von Neumann with waiting strategy (VN_8W) in a 130-nm CMOS. The maximum ExE of VN_8W is 62.21%, which is 2.49 times larger than the ExE of the original von Neumann. NIST SP 800-22 randomness test results proved the de-biasing and de-correlation abilities of VN_8W. As compared with the state-of-the-art optimized 7-element iterated von Neumann, VN_8W achieved more than 20% energy reduction with higher ExE. At 0.45V and 1MHz, VN_8W achieved the minimum energy of 0.18pJ/bit, which was suitable for sub-pJ low energy TRNGs.

Advanced information-processing services such as computer vision require a high-performance digital circuit to perform high-load processing at high speed. To achieve high-speed processing, several image-processing applications use an approximate computing technique to reduce idle time of the circuit. However, it is difficult to design the high-speed image-processing circuit while controlling the error rate so as not to degrade service quality, and this technique is used for only a few applications. In this paper, we propose a method that achieves high-speed processing effectively in which processing time for each task is changed by roughly detecting its completion. Using this method, a high-speed processing circuit with a low error rate can be designed. The error rate is controllable, and a circuit design method to minimize the error rate is also presented in this paper. To confirm the effectiveness of our proposal, a ripple-carry adder (RCA), 2-dimensional discrete cosine transform (2D-DCT) circuit, and histogram of oriented gradients (HOG) feature calculation circuit are evaluated. Effective clock periods of these circuits obtained by our method with around 1% error rate are improved about 64%, 6%, and 12%, respectively, compared with circuits without error. Furthermore, the impact of the miscalculation on a video monitoring service using an object detection application is investigated. As a result, more than 99% of detection points required to be obtained are detected, and it is confirmed the miscalculation hardly degrades the service quality.

Convolutional neural networks (CNNs) have dominated a range of applications, from advanced manufacturing to autonomous cars. For energy cost-efficiency, developing low-power hardware for CNNs is a research trend. Due to the large input size, the first few convolutional layers generally consume most latency and hardware resources on hardware design. To address these challenges, this paper proposes an innovative architecture named SLIT to extract feature maps and reconstruct the first few layers on CNNs. In this reconstruction approach, total multiply-accumulate operations are eliminated on the first layers. We evaluate new topology with MNIST, CIFAR, SVHN, and ImageNet datasets on image classification application. Latency and hardware resources of the inference step are evaluated on the chip ZC7Z020-1CLG484C FPGA with Lenet-5 and VGG schemes. On the Lenet-5 scheme, our architecture reduces 39% of latency and 70% of hardware resources with a 0.456 W power consumption compared to previous works. Even though the VGG models perform with a 10% reduction in hardware resources and latency, we hope our overall results will potentially give a new impetus for future studies to reach a higher optimization on hardware design. Notably, the SLIT architecture efficiently merges with most popular CNNs at a slightly sacrificing accuracy of a factor of 0.27% on MNIST, ranging from 0.5% to 1.5% on CIFAR, approximately 2.2% on ImageNet, and remaining the same on SVHN databases.

This paper proposes a pulse-width modulated (PWM) signaling[1] to send clock and data over a pair of channels for in-vehicle network where a closed chain of point-to-point (P2P) interconnection between electronic control units (ECU) has been established. To improve detection speed and margin of proposed receiver, we also proposed a novel clock and data recovery (CDR) scheme with 0.5 unit-interval (UI) tuning range and a PWM generator utilizing 10 equally-spaced phases. The feasibility of proposed system has been proved by successfully detecting 1.25 Gb/s data delivered via 3 ECUs and inter-channels in 180 nm CMOS technology. Compared to previous study, the proposed system achieved better efficiency in terms of power, cost, and reliability.

We investigate an online problem of a robot exploring the outer boundary of an unknown simple polygon P. The robot starts from a specified vertex s and walks an exploration tour outside P. It has to see all points of the polygon's outer boundary and to return to the start. We provide lower and upper bounds on the ratio of the distance traveled by the robot in comparison to the length of the shortest path. We consider P in two scenarios: convex polygon and concave polygon. For the first scenario, we prove a lower bound of 5 and propose a 23.78-competitive strategy. For the second scenario, we prove a lower bound of 5.03 and propose a 26.5-competitive strategy.

At present, the generative adversarial network (GAN) plays an important role in learning tasks. The basic idea of a GAN is to train the discriminator and generator simultaneously. A GAN-based inverse tone mapping method can generate high dynamic range (HDR) images corresponding to a scene according to multiple image sequences of a scene with different exposures. However, subsequent tone mapping algorithm processing is needed to display it on a general device. This paper proposes an end-to-end multi-exposure image fusion algorithm based on a relative GAN (called RaGAN-EF), which can fuse multiple image sequences with different exposures directly to generate a high-quality image that can be displayed on a general device without further processing. The RaGAN is used to design the loss function, which can retain more details in the source images. In addition, the number of input image sequences of multi-exposure image fusion algorithms is often uncertain, which limits the application of many existing GANs. This paper proposes a convolutional layer with weights shared between channels, which can solve the problem of variable input length. Experimental results demonstrate that the proposed method performs better in terms of both objective evaluation and visual quality.

In this paper, a deep learning-based secret key generation scheme is proposed for FDD multiple-input and multiple-output (MIMO) systems. We built an encoder-decoder based convolutional neural network to characterize the wireless environment to learn the mapping relationship between the uplink and downlink channel. The designed neural network can accurately predict the downlink channel state information based on the estimated uplink channel state information without any information feedback. Random secret keys can be generated from downlink channel responses predicted by the neural network. Simulation results show that deep learning based SKG scheme can achieve significant performance improvement in terms of the key agreement ratio and achievable secret key rate.

The increased performance of mobile terminals has made it feasible to collect data using users' terminals. By making the best use of the network performance data widely collected in this way, network operators should deeply understand the current network conditions, identify the performance-degraded components in the network, and estimate the degree of their performance degradation. For their demands, one powerful solution with such end-to-end data measured by users' terminals is network tomography. Meanwhile, with the advance of network virtualization by software-defined networking, routing is dynamically changed due to congestion or other factors, and each end-to-end measurement flow collected from users may pass through different paths between even the same origin-destination node pair. Therefore, it is difficult and costly to identify through which path each measurement flow has passed, so it is also difficult to naively apply conventional network tomography to such networks where the measurement paths cannot be uniquely determined. We propose a novel network tomography for the networks with undeterministic routing where the measurement flows pass through multiple paths in spite of the origin-destination node pair being the same. The basic idea of our method is to introduce routing probability in accordance with the aggregated information of measurement flows. We present two algorithms and evaluate their performances by comparing them with algorithms of conventional tomography using determined routing information. Moreover, we verify that the proposed algorithms are applicable to a more practical network.

This paper presents a high jitter performance injection-locked clock multiplier (ILCM) using an ultra-low power (ULP) voltage-controlled oscillator (VCO) for IoT application in 65-nm CMOS. The proposed transformer-based VCO achieves low flicker noise corner and sub-100µW power consumption. Double cross-coupled NMOS transistors sharing the same current provide high transconductance. The network using high-Q factor transformer (TF) provides a large tank impedance to minimize the current requirement. Thanks to the low current bias with a small conduction angle in the ULP VCO design, the proposed TF-based VCO's flicker noise can be suppressed, and a good PN can be achieved in flicker region (1/f3) with sub-100µW power consumption. Thus, a high figure-of-merit (FoM) can be obtained at both 100kHz and 1MHz without additional inductor. The proposed VCO achieves phase noise of -94.5/-115.3dBc/Hz at 100kHz/1MHz frequency offset with a 97µW power consumption, which corresponds to a -193/-194dBc/Hz VCO FoM at 2.62GHz oscillation frequency. The measurement results show that the 1/f3 corner is below 60kHz over the tuning range from 2.57GHz to 3.40GHz. Thanks to the proposed low power VCO, the total ILCM achieves 78 fs RMS jitter while using a high reference clock. A 960 fs RMS jitter can be achieved with a 40MHz common reference and 107µW corresponding power.