In March 2020, the 5th generation mobile communication system (5G) was launched in Japan. Frequency bands of 3.7GHz, 4.5GHz and 28GHz were allocated for 5G services, and the 5G use cases fall into three broad categories: Enhanced Mobile Broadband (eMBB), Massive Machine Type Communication (mMTC) and Ultra-Reliable Low Latency Communication (URLLC). The use cases and services that take advantage of the characteristics of each category are expected to be put to practical use, and experiments of practical use are underway. This paper introduces and demonstrates a touchless gate that can identify, authenticate and allow passage through the gate by using these features and 5G beam tracking to estimate location by taking advantage of the low latency of 5G and the straightness of the 28GHz band radio wave and its resistance to spreading. Since position estimation error due to reflected waves and other factors has been a problem, we implement an algorithm that tracks the beam and estimates the user's line of movement, and by using an infrared sensor, we made it possible to identify the gate through which the user passes with high probability. We confirmed that the 5G touchless gate is feasible for gate passage. In addition, we demonstrate that a new service based on high-speed high-capacity communication is possible at gate passage by taking advantage of the wide bandwidth of the 28GHz band. Furthermore, as a use case study of the 5G touchless gate, we conducted a joint experiment with an airline company.

In order to realize the higher bit rates compared for the fifth-generation (5G) mobile communication system, massive MIMO technologies in higher frequency bands with wider bandwidth are being investigated for 5G evolution and 6G. One of practical method to realize massive MIMO in the high frequency bands is hybrid beamforming (BF). With this approach, user selection is an important function because its performance is highly affected by inter-user interference. However, the computational complexity of user selection in multi-user massive MIMO is high because MIMO channel matrix size excessive. Furthermore, satisfying user fairness by proportional fairness (PF) criteria leads to further increase of the complexity because re-calculation of precoding and postcoding matrices is required for each combination of selected users. To realize a fair and low-complexity user selection algorithm for multi-user massive MIMO employing hybrid BF, this paper proposes a two-step user selection algorithm that combines PF based user selection and chordal distance user selection. Computer simulations show that the proposed two-step user selection algorithm with higher user fairness and lower computational complexity can achieve higher system performance than the conventional user selection algorithms.

This paper proposes time division multiplexing (TDM) based reference signal (RS) multiplexing for faster-than-Nyquist (FTN) signaling using orthogonal frequency division multiplexing (OFDM). We also propose a subframe structure in which a cyclic prefix (CP) is appended to only the TDM based RS block and the first FTN symbol to achieve accurate estimation of the channel response in a multipath fading channel with low CP overhead. Computer simulation results show that the loss in the required average received SNR satisfying the average block error rate (BLER) of 10-2 using the proposed TDM based RS multiplexing from that with ideal channel estimation is suppressed to within approximately 1.2dB and 1.7dB for QPSK and 16QAM, respectively. This is compared to when the improvement ratio of the spectral efficiency from CP-OFDM is 1.31 with the rate-1/2 turbo code. We conclude that the TDM based RS multiplexing with the associated CP multiplexing is effective in achieving accurate channel estimation for FTN signaling using OFDM.

A narrowband active noise control (NANC) system is very effective for controlling low-frequency periodic noise. A frequency mismatch (FM) with the reference signal will degrade the performance or even cause the system to diverge. To deal with an FM and obtain an accurate reference signal, NANC systems often employ a frequency estimator. Combining an autoregressive predictive filter with a variable step size (VSS) all-pass-based lattice adaptive notch filter (ANF), a new frequency estimation method is proposed that does not require prior information of the primary signal, and the convergence characteristics are much improved. Simulation results show that the designed frequency estimator has a higher accuracy than the conventional algorithm. Finally, hardware experiments are carried out to verify the noise reduction effect.

We revisit the design of Lesamnta-LW, which is one of the three lightweight hash functions specified in ISO/IEC 29192-5:2016. Firstly, we present some updates on the bounds of the number of active S-boxes for the underlying 64-round block cipher. While the designers showed that the Viterbi algorithm ensured 24 active S-boxes after 24 rounds, our tool based on Mixed Integer Linear Programming (MILP) in the framework of Mouha et al. ensures the same number of active S-boxes only after 18 rounds. The tool completely evaluates the tight bound of the number of active S-boxes, and it shows that the bound is 103 for full (64) rounds. We also analyze security of the Shuffle operation in the round function and resistance against linear cryptanalysis. Secondly, we present a new mode for a pseudorandom function (PRF) based on Lesamnta-LW. It is twice as efficient as the previous PRF modes based on Lesamnta-LW. We prove its security both in the standard model and the ideal cipher model.

We developed a Nb 4-layer process for fabricating superconducting integrated circuits that involves using caldera planarization to increase the flexibility and reliability of the fabrication process. We call this process the planarized high-speed standard process (PHSTP). Planarization enables us to flexibly adjust most of the Nb and SiO2 film thicknesses; we can select reduced film thicknesses to obtain larger mutual coupling depending on the application. It also reduces the risk of intra-layer shorts due to etching residues at the step-edge regions. We describe the detailed process flows of the planarization for the Josephson junction layer and the evaluation of devices fabricated with PHSTP. The results indicated no short defects or degradation in junction characteristics and good agreement between designed and measured inductances and resistances. We also developed single-flux-quantum (SFQ) and adiabatic quantum-flux-parametron (AQFP) logic cell libraries and tested circuits fabricated with PHSTP. We found that the designed circuits operated correctly. The SFQ shift-registers fabricated using PHSTP showed a high yield. Numerical simulation results indicate that the AQFP gates with increased mutual coupling by the planarized layer structure increase the maximum interconnect length between gates.

This letter reports on the effectiveness of applying the K-singular value decomposition (SVD) dictionary learning to the electroencephalogram (EEG) compressed sensing framework with outlier detection and independent component analysis. Using the K-SVD dictionary matrix with our design parameter optimization, for example, at compression ratio of four, we improved the normalized mean square error value by 31.4% compared with that of the discrete cosine transform dictionary for CHB-MIT Scalp EEG Database.

In this paper, we address the problem of detector design in severely frequency-selective channels for spatial multiplexing systems that adopt filter bank multicarrier based on offset quadrature amplitude modulation (FBMC/OQAM) as the communication waveforms. We consider decision feedback equalizers (DFEs) that use multiple feedback filters to jointly cancel the post-cursor components of inter-symbol interference, inter-antenna interference, and, in some configuration, inter-subchannel interference. By exploiting the special structures of the correlation matrix and the staggered property of the FBMC/OQAM signals, we obtain an efficient method of computing the DFE coefficients that requires a smaller number of multiplications than the linear equalizer (LE) and conventional DFE do. The simulation results show that the proposed detectors considerably outperform the LE and conventional DFE at moderate-to-high signal-to-noise ratios.

This letter proposes a power amplifier (PA) with compact matching network. This structure is a parallel dual radial microstrip line in the output matching network branch. The input impedance expression based on the structure is deduced through theoretical analysis, and the load impedance that satisfies the class EFJ PA is obtained through the impedance expression. Compared with the traditional design method, this design method is simple and novel, and the structure is more compact. In order to further improve efficiency and expand bandwidth, the input matching network adopts a stepped impedance matching method. In order to verify the correctness of the design, a broadband high-efficiency PA was designed using GaN HEMT CGH40010F. The test results show that the drain efficiency is 61%-71% in the frequency band 1.4-3.8GHz, the saturated output power is 40.3-41.8dBm, and the size is 53×47mm2.

This review provides a current overview of the fabrication processes for superconducting digital circuits at CRAVITY (clean room for analog and digital superconductivity) at the National Institute of Advanced Industrial Science and Technology (AIST), Japan. CRAVITY routinely fabricates superconducting digital circuits using three types of fabrication processes and supplies several thousand chips to its collaborators each year. Researchers at CRAVITY have focused on improving the controllability and uniformity of device parameters and the reliability, which means reducing defects. These three aspects are important for the correct operation of large-scale digital circuits. The current technologies used at CRAVITY permit ±10% controllability over the critical current density (Jc) of Josephson junctions (JJs) with respect to the design values, while the critical current (Ic) uniformity is within 1σ=2% for JJs with areas exceeding 1.0 µm2 and the defect density is on the order of one defect for every 100,000 JJs.

The microfabrication technique based on synchrotron radiation (SR) direct etching process has recently been applied to construct PTFE microstructures. This paper proposes a PTFE substrate integrated waveguide (PTFE SIW). It is expected that the PTFE SIW contributes to the improvement of the structural strength. A rectangular through-hole is introduced taking the advantage of the SR direct etching process. First, a PTFE SIW for the Q-band is designed. Then, a cruciform 3-dB directional coupler consisting of the PTFE SIW is designed and fabricated by the SR direct etching process. The validity of the PTFE SIW coupler is confirmed by measuring the frequency characteristics of the S-parameters. The mechanical strength of the PTFE SIW and the peeling strength of its Au film are also additionally investigated.

Autonomous vehicles and advanced driver assistant systems (ADAS) are receiving notable attention as research fields in both academia and private industry. Some decision-making systems use sets of logical rules to map knowledge of the ego-vehicle and its environment into actions the ego-vehicle should take. However, such rulesets can be difficult to create — for example by manually writing them — due to the complexity of traffic as an operating environment. Furthermore, the building blocks of the rules must be defined. One common solution to this is using an ontology specifically aimed at describing traffic concepts and their hierarchy. These ontologies must have a certain expressive power to enable construction of useful rules. We propose a process of generating sets of explanatory rules for ADAS applications from data using ontology as a base vocabulary and present a ruleset generated as a result of our experiments that is correct for the scope of the experiment.

Feature detection and matching procedure require most of processing time in image matching where the time dramatically increases according to the number of feature points. The number of features is needed to be controlled for specific applications because of their processing time. This paper proposes a feature detection method based on significancy of local features. The feature significancy is computed for all pixels and higher significant features are chosen considering spatial distribution. The method contributes to reduce the number of features in order to match two images with maintaining high matching accuracy. It was shown that this approach was faster about two times in average processing time than FAST detector for natural scene images in the experiments.

This paper presents the physical-layer cell identity (PCID) detection probability using the narrowband primary synchronization signal (NPSS) and narrowband secondary synchronization signal (NSSS) based on the narrowband Internet-of-Things (NB-IoT) radio interface considering frequency offset and the maximum Doppler frequency in the 28-GHz band. Simulation results show that the autocorrelation based NPSS detection method is more effective than the cross-correlation based NPSS detection using frequency offset estimation and compensation before the NPSS received timing detection from the viewpoints of PCID detection probability and computational complexity. We also show that when using autocorrelation based NPSS detection, the loss in the PCID detection probability at the carrier frequency of fc =28GHz compared to that for fc =3.5GHz is only approximately 5% at the average received signal-to-noise ratio (SNR) of 0dB when the frequency stability of a local oscillator of a user equipment (UE) set is 20ppm. Therefore, we conclude that the multiplexing schemes and sequences of NPSS and NSSS based on the NB-IoT radio interface associated with autocorrelation based NPSS detection will support the 28-GHz frequency spectra.

Most aggregate signature schemes are relying on pairings, but high computational and storage costs of pairings limit the feasibility of those schemes in practice. Zhao proposed the first pairing-free aggregate signature scheme (AsiaCCS 2019). However, the security of Zhao's scheme is based on the hardness of a newly introduced non-standard computational problem. The recent impossibility results of Drijvers et al. (IEEE S&P 2019) on two-round pairing-free multi-signature schemes whose security based on the standard discrete logarithm (DL) problem have strengthened the view that constructing a pairing-free aggregate signature scheme which is proven secure based on standard problems such as DL problem is indeed a challenging open problem. In this paper, we offer a novel solution to this open problem. We introduce a new paradigm of aggregate signatures, i.e., aggregate signatures with an additional pre-communication stage. In the pre-communication stage, each signer interacts with the aggregator to agree on a specific random value before deciding messages to be signed. We also discover that the impossibility results of Drijvers et al. take effect if the adversary can decide the whole randomness part of any individual signature. Based on the new paradigm and our discovery of the applicability of the impossibility result, we propose a pairing-free aggregate signature scheme such that any individual signature includes a random nonce which can be freely generated by the signer. We prove the security of our scheme based on the hardness of the standard DL problem. As a trade-off, in contrast to the plain public-key model, which Zhao's scheme uses, we employ a more restricted key setup model, i.e., the knowledge of secret-key model.

A universal interconnection network implements arbitrary interconnections among n terminals. This paper considers a problem to realize such a network using contact switches. When n=2, it can be implemented with a single switch. The number of different connections among n terminals is given by the Bell number B(n). The Bell number shows the total number of methods to partition n distinct elements. For n=2, 3, 4, 5 and 6, the corresponding Bell numbers are 2, 5, 15, 52, and 203, respectively. This paper shows a method to realize an n terminal universal interconnection network with $rac {3}{8}(n^2-1)$ contact switches when n=2m+1≥5, and $rac {n}{8}(3n+2)$ contact switches, when n=2m≥6. Also, it shows that a lower bound on the number of contact switches to realize an n-terminal universal interconnection network is ⌈log 2B(n)⌉, where B(n) is the Bell number.

Data parallelism is the dominant method used to train deep learning (DL) models on High-Performance Computing systems such as large-scale GPU clusters. When training a DL model on a large number of nodes, inter-node communication becomes bottle-neck due to its relatively higher latency and lower link bandwidth (than intra-node communication). Although some communication techniques have been proposed to cope with this problem, all of these approaches target to deal with the large message size issue while diminishing the effect of the limitation of the inter-node network. In this study, we investigate the benefit of increasing inter-node link bandwidth by using hybrid switching systems, i.e., Electrical Packet Switching and Optical Circuit Switching. We found that the typical data-transfer of synchronous data-parallelism training is long-lived and rarely changed that can be speed-up with optical switching. Simulation results on the Simgrid simulator show that our approach speed-up the training time of deep learning applications, especially in a large-scale manner.

Recently, the controllability of complex networks has become a hot topic in the field of network science, where the driver nodes play a key and central role. Therefore, studying their structural characteristics is of great significance to understand the underlying mechanism of network controllability. In this paper, we systematically investigate the nodal centrality of driver nodes in controlling complex networks, we find that the driver nodes tend to be low in-degree but high out-degree nodes, and most of driver nodes tend to have low betweenness centrality but relatively high closeness centrality. We also find that the tendencies of driver nodes towards eigenvector centrality and Katz centrality show very similar behaviors, both high eigenvector centrality and high Katz centrality are avoided by driver nodes. Finally, we find that the driver nodes towards PageRank centrality demonstrate a polarized distribution, i.e., the vast majority of driver nodes tend to be low PageRank nodes whereas only few driver nodes tend to be high PageRank nodes.

In the context of Web 2.0, the interaction between users and resources is more and more frequent in the process of resource sharing and consumption. However, the current research on resource pricing mainly focuses on the attributes of the resource itself, and does not weigh the interests of the resource sharing participants. In order to deal with these problems, the pricing mechanism of resource-user interaction evaluation based on multi-agent game theory is established in this paper. Moreover, the user similarity, the evaluation bias based on link analysis and punishment of academic group cheating are also included in the model. Based on the data of 181 scholars and 509 articles from the Wanfang database, this paper conducts 5483 pricing experiments for 13 months, and the results show that this model is more effective than other pricing models - the pricing accuracy of resource resources is 94.2%, and the accuracy of user value evaluation is 96.4%. Besides, this model can intuitively show the relationship within users and within resources. The case study also exhibits that the user's knowledge level is not positively correlated with his or her authority. Discovering and punishing academic group cheating is conducive to objectively evaluating researchers and resources. The pricing mechanism of scientific and technological resources and the users proposed in this paper is the premise of fair trade of scientific and technological resources.

In this letter, we investigate tight analytical and asymptotic upper bounds for bit error rate (BER) of constitutional codes over exponentially correlated Nakagami-m fading channels. Specifically, we derive the BER expression depending on an exact closed-form formula for pairwise error event probabilities (PEEP). Moreover, the corresponding asymptotic analysis in high signal-to-noise ratio (SNR) regime is also explored, which is verified via numerical results. This allows us to have explicit insights on the achievable coding gain and diversity order.