Big data analysis and a data storing applications require a huge volume of storage and a high I/O performance. Applications can achieve high level of performance and cost efficiency by exploiting the high I/O performance of direct attached storages (DAS) such as internal HDDs. With the size of stored data ever increasing, it will be difficult to replace servers since internal HDDs contain huge amounts of data. Generally, the data is copied via Ethernet when transferring the data from the internal HDDs to the new server. However, the amount of data will continue to rapidly increase, and thus, it will be hard to make these types of transfers through the Ethernet since it will take a long time. A storage area network such as iSCSI can be used to avoid this problem because the data can be shared with the servers. However, this decreases the level of performance and increases the costs. Improving the flexibility without incurring I/O performance degradation is required in order to improve the DAS architecture. In response to this issue, we propose FlexDAS, which improves the flexibility of direct attached storage by using a disk area network (DAN) without degradation the I/O performance. A resource manager connects or disconnects the computation nodes to the HDDs via the FlexDAS switch, which supports the SAS or SATA protocols. This function enables for the servers to be replaced in a short period of time. We developed a prototype FlexDAS switch and quantitatively evaluated the architecture. Results show that the FlexDAS switch can disconnect and connect the HDD to the server in just 1.16 seconds. We also confirmed that the FlexDAS improves the performance of the data intensive applications by up to 2.84 times compared with the iSCSI.

This paper reviews a recent progress in terahertz wireless communications enabled by photonics technologies. After briefly summarizing transceiver configurations with electronics and photonics technologies, photonics-based approaches to achieving over 100-Gbit/s data rates are discussed. Then, some of our updated results on real-time wireless transmission experiments using discrete components are shown at data rates up to 50 Gbit/s. Finally, integration technologies are described by demonstrating latest advances in integrated optical sources and transmitters.

Recently in the mobile graphic industry, ultra-realistic visual qualities with 60fps and limited power budget for GPU have been required. For graphics-heavy applications that run at 30 fps, we easily observed very noticeable flickering artifacts. Further, the workload imposed by high resolutions at high frame rates directly decreases the battery life. Unlike the recent frame rate up sampling algorithms which remedy the flickering but cause inevitable significant overheads to reconstruct intermediate frames, we propose a dynamic rendering quality scaling (DRQS) that includes dynamic rendering based on resolution changes and quality scaling to increase the frame rate with negligible overhead using a transform matrix. Further DRQS reduces the workload up to 32% without human visual-perceptual changes for graphics-light applications.

The pilot symbols in the broadband Air-to-Ground (A/G) communications system, e.g., L-band Digital Aeronautical Communications System (L-DACS1), are expected to be also utilized for navigation. In order to identify the co-channel signals from different Ground Stations (GSs), the N-Shift Zero Correlation Zone (NS-ZCZ) sequences are employed for pilot sequences. The ideal correlation property of the proposed pilot sequence in ZCZ can maintain the signal with less co-channel interference. The simulation confirms that the more co-channel GSs are employed, the higher navigation accuracy can be achieved.

In this paper, we apply the concept of software-defined data plane to defining new services for Mobile Virtual Network Operators (MVNOs). Although there are a large number of MVNOs proliferating all over the world and most of them provide low bandwidth at low price, we propose a new business model for MVNOs and empower them with capability of tailoring fine-grained subscription plans that can meet users' demands. For example, abundant bandwidth can be allocated for some specific applications, while the rest of the applications are limited to low bandwidth. For this purpose, we have recently proposed the concept of application and/or device specific slicing that classifies application and/or device specific traffic into slices and applies fine-grained quality of services (QoS), introducing various applications of our proposed system [9]. This paper reports the prototype implementation of such proposal in the real MVNO connecting customized smartphones so that we can identify applications from the given traffic with 100% accuracy. In addition, we propose a new method of identifying applications from the traffic of unmodified smartphones by machine learning using the training data collected from the customized smartphones. We show that a simple machine learning technique such as random forest achives about 80% of accuracy in applicaton identification.

Many public cloud datacenters have adopted the Edge-Overlay model which supports virtual switch-based network virtualization using IP tunneling. However, software-implemented virtual switches can cause performance degradation because the packet processing load can concentrate on a particular CPU core. As a result, such load concentration decreases and destabilizes the performance of virtual networks. Although multi-queue functions like Receive Side Scaling (RSS) can distribute the load onto multiple CPU cores, they still have performance problems such as IRQ core collision between priority flows as well as competitive resource use between host and guest machines for received packet processing. In this paper, we propose Virtual Switch Extension (VSE) that adaptively determines CPU core assignment for SoftIRQ to prevent performance degradation. VSE supports two types of SoftIRQ core selection mechanisms, on-the-fly or predetermined. In the on-the-fly mode, VSE selects a SoftIRQ core based on current CPU load to exploit low-loaded CPU resources. In the predetermined mode, SoftIRQ cores are assigned in advance to differentiate the performance of priority flows. This paper describes a basic architecture and implementation of VSE and how VSE assigns a SoftIRQ cores. Moreover, we evaluate fundamental throughput of various CPU assignment models in the predetermined mode. Finally, we evaluate the performance of a priority VM in two VM usecases, the client-usecase which is receive-oriented and the router-usecase which performs bi-directional communications. In the client-usecase, the throughput of the priority VM was improved by 31% compared with RSS when the priority VM had one dedicated core. In the router-usecase, the throughput was improved by 29% when three dedicated cores were provided for the VM.

The conical area evolutionary algorithm (CAEA) has a very high run-time efficiency for bi-objective optimization, but it can not tackle problems with more than two objectives. In this letter, a conical hypervolume evolutionary algorithm (CHEA) is proposed to extend the CAEA to a higher dimensional objective space. CHEA partitions objective spaces into a series of conical subregions and retains only one elitist individual for every subregion within a compact elitist archive. Additionally, each offspring needs to be compared only with the elitist individual in the same subregion in terms of the local hypervolume scalar indicator. Experimental results on 5-objective test problems have revealed that CHEA can obtain the satisfactory overall performance on both run-time efficiency and solution quality.

Amplify-and-forward (AF) relay multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems can achieve high data rate and high quality communications. On the other hand, it has to estimate all channels between the source-relay and relay-destination nodes in the destination node. In MIMO/OFDM systems, high time resolution carrier interferometry (HTRCI) has been proposed to achieve an accurate channel estimation (CE) with a small number of pilot signals. However, since it has many interferences, an accurate CE is not obtained and the system performance is degraded in AF relay MIMO/OFDM systems. Therefore, in this paper, we propose the complex HTRCI (C-HTRCI) pilot signal and the enhanced minimum mean square error (E-MMSE) equalization to achieve an accurate CE and to improve the system performance for AF relay MIMO/OFDM systems.

Mobile virtual network operators (MVNOs) are mobile operators without their own infrastructure or government issued spectrum licenses. They purchase spectrum resources from primary mobile network operators (MNOs) to provide communication services under their own brands. MVNOs are expected to play an important role in mobile network markets, as this will increase the competition in retail markets and help to meet the demand of niche markets. However, with the rapidly increasing demand of mobile data traffic, efficient utilization of the limited spectrum resources owned by MVNOs has become an important issue. We propose here a resource sharing mechanism between MVNOs against the background of network functions virtualization (NFV). The proposed mechanism enables MVNOs to improve their quality of service (QoS) by sharing spectrum resources with each other. A nash bargaining solution based decision strategy is also devised to ensure the fairness of resource sharing. Extensive numerical evaluation results validate the effectiveness of the proposed models and mechanisms.

In this paper, we introduce a distributed power allocation strategy for random access, that has the capabilities of multipacket reception (MPR) and successive interference cancellation (SIC). The proposed random access scheme is suitable for machine-to-machine (M2M) communication application in fifth-generation (5G) cellular networks. A previous study optimized the probability distribution for discrete transmission power levels, with implicit limitations on the successful decoding of at most two packets from a single collision. We formulate the optimization problem for the general case, where a base station can decode multiple packets from a single collision, and this depends only on the signal-to-interference-plus-noise ratio (SINR). We also propose a feasible suboptimal iterative per-level optimization process; we do this by introducing relationships among the different discrete power levels. Compared with the conventional power allocation scheme with MPR and SIC, our method significantly improves the system throughput; this is confirmed by computer simulations.

Routing is a challenging issue in mobile social networks (MSNs) because of time-varying links and intermittent connectivity. In order to enable nodes to make right decisions while forwarding messages, exploiting social relationship has become an important method for designing efficient routing protocols in MSNs. In this paper, we first use the temporal evolution graph model to accurately capture the dynamic topology of the MSN. Based on the model, we introduce the social relationship metric for detecting the quality of human social relationship from contact history records. Utilizing this metric, we propose social relationship based betweenness centrality metric to identify influential nodes to ensure messages forwarded by the nodes with stronger social relationship and higher likelihood of contacting other nodes. Then, we present SRBet, a novel social-based forwarding algorithm, which utilizes the aforementioned metric to enhance routing performance. Simulations have been conducted on two real world data sets and results demonstrate that the proposed forwarding algorithm achieves better performances than the existing algorithms.

OSEK/VDX, a standard for an automobile OS, has been widely adopted by many manufacturers to design and develop a vehicle-mounted OS. With the increasing functionalities in vehicles, more and more complex applications are be developed based on the OSEK/VDX OS. However, how to ensure the reliability of developed applications is becoming a challenge for developers. To ensure the reliability of developed applications, model checking as an exhaustive technique can be applied to discover subtle errors in the development process. Many model checkers have been successfully applied to verify sequential software and general multi-threaded software. However, it is hard to directly use existing model checkers to precisely verify OSEK/VDX applications, since the execution characteristics of OSEK/VDX applications are different from the sequential software and general multi-threaded software. In this paper, we describe and develop an approach to translate OSEK/VDX applications into sequential programs in order to employ existing model checkers to precisely verify OSEK/VDX applications. The value of our approach is that it can be considered as a front-end translator for enabling existing model checkers to verify OSEK/VDX applications.

This contribution addresses optimum wireless link selection in a 5G heterogeneous Multicomm environment in which multiple distinct Radio Access Technologies can be operated simultaneously by a given Mobile Device. The related decision making mechanisms are proposed to be part of the Mobile Device User Equipment which identifies the preferred Radio Access Technologies to be operated as well as the preferred Modulation and Coding parameters and finally selects the optimum choice either independently or through negotiation with the Network Infrastructure Equipment. In this context, the concerned Mobile Device is able to manage the bandwidth to be employed for communication — the bandwidth per Radio Access Technology is typically defined by the Network Infrastructure but the possibility for aggregating a multitude of distinct technologies introduces a new degree of freedom enabling the choice of the bandwidth selection. Simulation results demonstrate that the Mobile Device driven selection of a Multicomm configuration may either substantially reduce Mobile Device power consumption (75% in a typical example) or increase the aggregate throughput at an identical power consumption level compared to the single link case (a 3x factor in a typical example).

An Authenticated Encryption scheme is used to guarantee both privacy and authenticity of digital data. At FSE 2014, an authenticated encryption scheme called CLOC was proposed. CLOC is designed to handle short input data efficiently without needing heavy precomputation nor large memory. This is achieved by making various cases of different treatments in the encryption process depending on the input data. Five tweak functions are used to handle the conditional branches, and they are designed to satisfy 55 differential probability constraints, which are used in the security proof of CLOC. In this paper, we show that all these 55 constraints are necessary. This shows the design optimality of the tweak functions in CLOC in that the constraints cannot be relaxed, and hence the specification of the tweak functions cannot be simplified.

Multiple subcarrier passive communication is a new research area which enables a type of frequency division multiple access with wireless and batteryless sensor RF tags just by implementing RF switches to produce dedicated subcarriers. Since the mutual interference among subcarriers is unevenly distributed over the frequency band, careless allocations of subcarrier frequencies may result in degraded network performance and inefficient use of the frequency resource. In this paper, we examine four subcarrier frequency allocation schemes using MATLAB numerical simulations. The four schemes are evaluated in terms of the communication capacity and access fairness among sensor RF tags. We found that the subcarrier allocation scheme plays an important role in multiple subcarrier communication and can improves the communication capacity by 35%.

Directional communications have been considered as a feasible alternative to improve spatial division and throughput in mobile communication environments. In general, directional MAC protocols proposed in the literature rely on channel reservation based on control frames, such as RTS/CTS. Notwithstanding, channel reservation based on control frames increases latency and has an impact on the network throughput. The main contribution of this paper is to propose a channel reservation technique based on pulse/tone signals. The proposed scheme, termed directional pulse/tone channel reservation (DPTCR), allows for efficient channel reservation without resorting to control frames such as RTS and CTS. Theoretical and empirical results show that the proposed scheme has a low probability of failure while providing significant throughput gains. The results show that DPTCR is able to provide throughput improvement up to 158% higher as compared to traditional channel reservation employing RTS/CTS frames.

Currently, many operators worldwide are deploying Long Term Evolution (LTE) to provide much faster access with lower latency and higher efficiency than its predecessors 3G and 3.5G. Meanwhile, the service rollout of LTE-Advanced, which is an evolution of LTE and a “true 4G” mobile broadband, is being underway to further enhance LTE performance. However, the anticipated challenges of the next decade (2020s) are so tremendous and diverse that there is a vastly increased need for a new generation mobile communications system with even further enhanced capabilities and new functionalities, namely a fifth generation (5G) system. Envisioning the development of a 5G system by 2020, at DOCOMO we started studies on future radio access as early as 2010, just after the launch of LTE service. The aim at that time was to anticipate the future user needs and the requirements of 10 years later (2020s) in order to identify the right concept and radio access technologies for the next generation system. The identified 5G concept consists of an efficient integration of existing spectrum bands for current cellular mobile and future new spectrum bands including higher frequency bands, e.g., millimeter wave, with a set of spectrum specific and spectrum agnostic technologies. Since a few years ago, we have been conducting several proof-of-concept activities and investigations on our 5G concept and its key technologies, including the development of a 5G real-time simulator, experimental trials of a wide range of frequency bands and technologies and channel measurements for higher frequency bands. In this paper, we introduce an overview of our views on the requirements, concept and promising technologies for 5G radio access, in addition to our ongoing activities for paving the way toward the realization of 5G by 2020.

Ultra high definition (UHD) imaging systems have attracted much attention as a next generation television (TV) broadcasting service and video streaming service. However, the state of the art video coding standards including H.265/HEVC has not enough compression rate for streaming, broadcasting and storing UHD. Existing coding standard such as H.265/HEVC normaly use RGB-YCbCr color transform before compressing RGB color image since that procedure can decorrelate color components well. However, there is room for improvement on the coding efficiency for color image based on an observation that the luminance and chrominance components changes in same locations. This observation inspired us to propose a new post-processing method for compressed images by using weighted least square (WLS) filter with coded luminance component as a guide image, for refining the edges of chrominance components. Since the computational cost of WLS tends to superlinearly increase with increasing image size, it is difficult to apply it to UHD images. To overcome this problem, we propose slightly overlapped block partitioning and a new variant of WLS (constrained WLS, CWLS). Experimental results of objective quality comparison and subjective assessment test using 4K images show that our proposed method can outperform the conventional method and reduce the bit amount for chrominance component drastically with preserving the subjective quality.

The Satellite/Terrestrial Integrated mobile Communication System (STICS), which allows terrestrial mobile phones to communicate directly through a satellite, has been studied [1]. Satellites are unaffected by the seismic activity that causes terrestrial damage, and therefore, the STICS can be expected to be a measure that ensures emergency call connection. This paper first describes the basic characteristics of call blocking rates of terrestrial mobile phone systems in areas where non-functional base stations are geographically clustered, as investigated through computer simulations that showed an increased call blocking rate as the number of non-functional base stations increased. Further simulations showed that restricting the use of the satellite system for emergency calls only ensures the STICS's capacity to transmit emergency communications; however, these simulations also revealed a weakness in the low channel utilization rate of the satellite system [2]. Therefore, in this paper, we propose increasing the channel utilization rate with a priority channel framework that divides the satellite channels between priority channels for emergency calls and non-priority channels that can be available for emergency or general use. Simulations of this priority channel framework showed that it increased the satellite system's channel utilization rate, while continuing to ensure emergency call connection [3]. These simulations showed that the STICS with a priority channel framework can provide efficient channel utilization and still be expected to provide a valuable secondary measure to ensure emergency communications in areas with clustered non-functional base stations during large-scale disasters.

All-optical 1-to-6 wavelength multicasting of a 10-Gb/s picosecond-tunable-width converted return-to-zero (RZ)-on-off-keying (OOK) data signal using a wideband-parametric pulse source from a distributed Raman amplifier (DRA) is experimentally demonstrated. Width-tunable wavelength multicasting within the C-band with approximately 40.6-nm of separation with various compressed RZ data signal inputs have been proposed and demonstrated. The converted multicast pulse widths can be flexibly controlled down to 2.67 ps by tuning the Raman pump powers of the DRA. Nearly equal pulse widths at all multicast wavelengths are obtained. Furthermore, wide open eye patterns and penalties less than 1.2 dB at the 10-9 bit-error-rate (BER) level are found.