Modular multilevel converters (MMCs) are an emerging and promising option for medium voltage direct current (MVDC) of all- electric ships. In order to improve the stability of the MVDC transmission system for ships, this paper presents a new control inputs-based Lyapunov strategy based on feedback linearization. Firstly, a set of dynamics equations is proposed based on separating the dynamics of AC-part currents and MMCs circulating currents. The new control inputs can be obtained by the use of feedback linearization theory applied to the dynamic equations. To complete the dynamic parts of the new control inputs from the viewpoint of MVDC system stability, the Lyapunov theory is designed some compensators to demonstrate the effects of the new control inputs on the MMCs state variable errors and its dynamic. In addition, the carrier phase shifted modulation strategy is used because of applying the few number of converter modules to the MVDC system for ships. Moreover, relying on the proposed control strategy, a simulation model is built in MATLAB/SIMULINK software, where simulation results are utilized to verify the validity of proposed control strategy in the MMC-based MVDC system for ships.

This paper presents a channel operating margin (COM) based high-speed serial link optimization using machine learning (ML). COM that is proposed for evaluating serial link is calculated at first and during the calculation several important equalization parameters corresponding to the best configuration are extracted which can be used for the ML modeling of serial link. Then a deep neural network containing hidden layers are investigated to model a whole serial link equalization including transmitter feed forward equalizer (FFE), receiver continuous time linear equalizer (CTLE) and decision feedback equalizer (DFE). By training, validating and testing a lot of samples that meet the COM specification of 400GAUI-8 C2C, an effective ML model is generated and the maximum relative error is only 0.1 compared with computation results. At last 3 link configurations are discussed from the view of tradeoff between the link performance and cost, illustrating that our COM based ML modeling method can be applied to advanced serial link design for NRZ, PAM4 or even other higher level pulse amplitude modulation signal.

CPU flush instruction-based cache side-channel attacks (cache instruction attacks) target a wide range of machines. For instance, Meltdown / Spectre combined with FLUSH+RELOAD gain read access to arbitrary data in operating system kernel and user processes, which work on cloud virtual machines, laptops, desktops, and mobile devices. Additionally, fault injection attacks use a CPU cache. For instance, Rowhammer, is a cache instruction attack that attempts to obtain write access to arbitrary data in physical memory, and affects machines that have DDR3. To protect against existing cache instruction attacks, various existing mechanisms have been proposed to modify hardware and software aspects; however, when latest cache instruction attacks are disclosed, these mechanisms cannot prevent these. Moreover, additional countermeasure requires long time for the designing and developing process. This paper proposes a novel mechanism termed FlushBlocker to protect against all types of cache instruction attacks and mitigate against cache instruction attacks employ latest side-channel vulnerability until the releasing of additional countermeasures. FlushBlocker employs an approach that restricts the issuing of cache flush instructions and the attacks that lead to failure by limiting control of the CPU cache. To demonstrate the effectiveness of this study, FlushBlocker was implemented in the latest Linux kernel, and its security and performance were evaluated. Results show that FlushBlocker successfully prevents existing cache instruction attacks (e.g., Meltdown, Spectre, and Rowhammer), the performance overhead was zero, and it was transparent in real-world applications.

New services can use fog nodes to distribute Internet of Things (IoT) data. To distribute IoT data, we apply the publish/subscribe messaging model to a fog computing system. A service provider assigns a unique identifier, called a Tag ID, to a player who owes data. A Tag ID matches multiple IDs and resolves the naming rule for data acquisition. However, when users configure their fog node and distribute IoT data to multiple players, the distributed data may contain private information. We propose a table-based access control list (ACL) to manage data transmission permissions to address this issue. It is possible to avoid unnecessary transmission of private data by using a table-based ACL. Furthermore, because there are fewer data transmissions, table-based ACL reduces traffic. Consequently, the overall system's average processing delay time can be reduced. The proposed method's performance was confirmed by simulation results. Table-based ACL, particularly, could reduce processing delay time by approximately 25% under certain conditions. We also concentrated on system security. The proposed method was used, and a qualitative evaluation was performed to demonstrate that security is guaranteed.

Privacy violations via spy cameras are becoming increasingly serious. With the recent advent of various smart home IoT devices, such as smart TVs and robot vacuum cleaners, spycam attacks that steal users' information are being carried out in more unpredictable ways. In this paper, we introduce a new spycam attack on a mobile WebVR environment. It is performed by a web attacker who maliciously accesses the back-facing cameras of victims' mobile devices while they are browsing the attacker's WebVR site. This has the power to allow the attacker to capture victims' surroundings even at the desired field of view through sophisticated content placement in VR scenes, resulting in serious privacy breaches for mobile VR users. In this letter, we introduce a new threat facing mobile VR and show that it practically works with major browsers in a stealthy manner.

In this research, the effect of Ar/N2-plasma sputtering gas pressure on the LaBxNy tunnel and block layer was investigated for pentacene-based floating-gate memory with an amorphous rubrene (α-rubrene) passivation layer. The influence of α-rubrene passivation layer for memory characteristic was examined. The pentacene-based metal/insulator/metal/insulator/semiconductor (MIMIS) diode and organic field-effect transistor (OFET) were fabricated utilizing N-doped LaB6 metal layer and LaBxNy insulator with α-rubrene passivation layer at annealing temperature of 200°C. In the case of MIMIS diode, the leakage current density and the equivalent oxide thickness (EOT) were decreased from 1.2×10-2 A/cm2 to 1.1×10-7 A/cm2 and 3.5 nm to 3.1 nm, respectively, by decreasing the sputtering gas pressure from 0.47 Pa to 0.19 Pa. In the case of floating-gate type OFET with α-rubrene passivation layer, the larger memory window of 0.68 V was obtained with saturation mobility of 2.2×10-2 cm2/(V·s) and subthreshold swing of 199 mV/dec compared to the device without α-rubrene passivation layer.

It is important to consider curvature properties around the control points to produce natural-looking results in the vector illustration. C2 interpolating splines satisfy point interpolation with local support. Unfortunately, they cannot control the sharpness of the segment because it utilizes trigonometric function as blending function that has no degree of freedom. In this paper, we alternate the definition of C2 interpolating splines in both interpolation curve and blending function. For the interpolation curve, we adopt a rational Bézier curve that enables the user to tune the shape of curve around the control point. For the blending function, we generalize the weighting scheme of C2 interpolating splines and replace the trigonometric weight to our novel hyperbolic blending function. By extending this basic definition, we can also handle exact non-C2 features, such as cusps and fillets, without losing generality. In our experiment, we provide both quantitative and qualitative comparisons to existing parametric curve models and discuss the difference among them.

Crowdedness of buses is playing an increasingly important role in the disease control of COVID-19. The lack of a practical approach to sensing the crowdedness of buses is a major problem. This paper proposes a bus crowdedness sensing system which exploits deep learning-based object detection to count the numbers of passengers getting on and off a bus and thus estimate the crowdedness of buses in real time. In our prototype system, we combine YOLOv5s object detection model with Kalman Filter object tracking algorithm to implement a sensing algorithm running on a Jetson nano-based vehicular device mounted on a bus. By using the driving recorder video data taken from real bus, we experimentally evaluate the performance of the proposed sensing system to verify that our proposed system system improves counting accuracy and achieves real-time processing at the Jetson Nano platform.

In order to further reduce the transmission rate of multi-channel satellite broadcast signals, whose carrier-to-noise ratio (CNR fluctuates due to rainfall attenuation, we propose a novel digitized radio-over-fiber (DRoF) -based optical re-transmission system based on adaptive combination compression for ultra-high definition (UHD) broadcasting satellite (BS)/communications satellite (CS) broadcast signals. The proposed system reduces the optical re-transmission rate of BS/CS signals as much as possible while handling input CNR fluctuations. Therefore, the transmission rate of communication signals in time-division multiplexing (TDM) transmission is ensured, and network sharing of communication signals and broadcast signals via passive optical network (PON) is realized. Based on the ITU-R P.618-13 prediction model, an experimental evaluation is performed using estimates of the long-term statistics of attenuation due to rainfall. The attenuation is evaluated as a percentage of the time that long-term re-transmission service is available. It is shown that the proposed system is able to accommodate a wide range of rainfall attenuation and achieve a 99.988% time percentage for the duration of service provision. In order to show the rate reduction effect of the proposed system, the quantization bit reduction effect as a function of the input CNR, which depends on rainfall attenuation, is experimentally confirmed. Experiments show that service operation time of 99.978% can be achieved by 3-bit transmission. This means a 62.5% reduction in transmission rate is realized compared to conventional fixed quantization. Furthermore, the average quantization bit number in our system for service operation times is 3.000, indicating that most service operation times are covered by just 3-bit transmission.

Running IoT applications on edge computing infrastructures has the benefits of low response times and efficient bandwidth usage. System verification on a testbed is required to deploy IoT applications in production environments. In a testbed, Docker containers are preferable for a smooth transition of tested application programs to production environments. In addition, the round-trip times (RTT) of Docker containers to clients must be ensured, according to the target application's response time requirements. However, in existing testbed systems, the RTTs between Docker containers and clients are not ensured. Thus, we must undergo a large amount of configuration data including RTTs between all pairs of wireless base station nodes and servers to set up a testbed environment. In this paper, we present an edge computing testbed system with simple application programming interfaces (API) for testbed users that ensures RTTs between Docker containers and clients. The proposed system automatically determines which servers to place Docker containers on according to virtual regions and the RTTs specified by the testbed users through APIs. The virtual regions provide reduced size information about the RTTs in a network. In the proposed system, the configuration data size is reduced to one divided by the number of the servers and the command arguments length is reduced to approximately one-third or less, whereas the increased system running time is 4.3s.

The top-K sorting is a variant of sorting used heavily in applications such as database management systems. Recently, the use of field programmable gate arrays (FPGAs) to accelerate sorting operation has attracted the interest of researchers. However, existing hardware top-K sorting algorithms are either resource-intensive or of low throughput. In this paper, we present a resource-efficient top-K sorting architecture that is composed of L cascading sorting units, and each sorting unit is composed of P sorting cells. K=PL largest elements are produced when a variable length input sequence is processed. This architecture can operate at a high frequency while consuming fewer resources. The experimental results show that our architecture achieved a maximum 1.2x throughput-to-resource improvement compared to previous studies.

Accurately describing user behaviors with appropriate sensors is always important when developing computing cost-effective systems. This paper employs datasets recorded for fine-grained reading detection using the J!NS MEME, an eye-wear device with electrooculography (EOG), accelerometer, and gyroscope sensors. We generate models for all possible combinations of the three sensors and employ self-supervised learning and supervised learning in order to gain an understanding of optimal sensor settings. The results show that only the EOG sensor performs roughly as well as the best performing combination of other sensors. This gives an insight into selecting the appropriate sensors for fine-grained reading detection, enabling cost-effective computation.

To accommodate an increasing amount of traffic efficiently, elastic optical networks (EON) that can use optical spectrum resources flexibly have been studied. We implement multi-path routing in case we cannot allocate the spectrum with single-path routing. However, multi-path routing requires more guard bands to avoid interference between two adjacent optical paths when compared with single-path routing in EON. A multi-path routing algorithm with traffic grooming technology has been proposed. The researchers assumed that a uniform modulation level was adopted, and so they did not consider the impact of path length on the resources needed. In this paper, we propose a multi-path routing method with traffic grooming considering path lengths. Our proposed method establishes an optical multi-path considering path length, fiber utilization, and the use of traffic grooming. Simulations show we can decrease the call-blocking probability by approximately 24.8% in NSFNET. We also demonstrate the effectiveness of traffic grooming and the improvement in the utilization ratio of optical spectrum resources.

Noninvasive recognition is an important trend in diabetes recognition. Unfortunately, the accuracy obtained from the conventional noninvasive recognition methods is low. This paper proposes a novel Diabetes Noninvasive Recognition method via the plantar pressure image and improved Capsule Network (DNR-CapsNet). The input of the proposed method is a plantar pressure image, and the output is the recognition result: healthy or possibly diabetes. The ResNet18 is used as the backbone of the convolutional layers to convert pixel intensities to local features in the proposed DNR-CapsNet. Then, the PrimaryCaps layer, SecondaryCaps layer, and DiabetesCaps layer are developed to achieve the diabetes recognition. The semantic fusion and locality-constrained dynamic routing are also developed to further improve the recognition accuracy in our method. The experimental results indicate that the proposed method has a better performance on diabetes noninvasive recognition than the state-of-the-art methods.

A Mach-Zehnder optical modulator with the tunable multimode interference coupler was fabricated using Ti-diffused LiNbO3. The modulation extinction ratio could be voltage controlled to maximize up to 50 dB by tuning the coupler. Optical single-sideband modulation was also achieved with a sideband suppression ratio of more than 30 dB.

This paper presents the design, implementation, and verification of a blockchain-based online electronic voting system that ensures accuracy and reliability in electronic voting and its application to various types of voting using blockchain technologies, such as distributed ledgers and smart contracts. Specifically, in this study, the connection between the electronic voting system and blockchain nodes is simplified using the REST API design, and the voting opening and counting information is designed to store the latest values in the distributed ledger in JSON format, using a smart contract that cannot be falsified. The developed electronic voting system can provide blockchain authentication, secret voting, forgery prevention, ballot verification, and push notification functions, all of which are currently not supported in existing services. Furthermore, the developed system demonstrates excellence on all evaluation items, including 101 transactions per second (TPS) of blockchain online authentication, 57.6 TPS of secret voting services, 250 TPS of forgery prevention cases, 547 TPS of read transaction processing, and 149 TPS of write transaction processing, along with 100% ballot verification service, secret ballot authentication, and encryption accuracy. Functional and performance verifications were obtained through an external test certification agency in South Korea. Our design allows for blockchain authentication, non-forgery of ballot counting data, and secret voting through blockchain-based distributed ledger technology. In addition, we demonstrate how existing electronic voting systems can be easily converted to blockchain-based electronic voting systems by applying a blockchain-linked REST API. This study greatly contributes to enabling electronic voting using blockchain technology through cost reductions, information restoration, prevention of misrepresentation, and transparency enhancement for a variety of different forms of voting.

Currently, unmanned aerial vehicles (UAV) have been widely used in many applications, such as in transportation logistics, public safety, or even in non-terrestrial networks (NTN). In all these scenarios, it is an important issue to model channel behavior between the UAV and the user equipment (UE) on the ground. Among these channel features, a critical parameter that dominates channel behavior is the probability of the line-of-sight (LOS), since the statistical property of the channel fading can be either Ricean or Rayleigh, depending on the existence of LOS. Besides, with knowledge of LOS probability, operators can design approaches or schemes to maximum system performance, such as the serving coverage, received signal to noise ratio (SNR), or the bit error rate (BER) with the limited transmitted power. However, the LOS UAV channel is likely difficult to acquire or derive, as it depends on the deployment scenario, such as an urban or rural area. In this paper, we generated four different scenarios defined by the ITU via the ray tracing simulator. Then, we used the spatial geometric relation and the curve fitting approach to derive the analytic models to predict the probability of the UAV LOS channels for different scenarios. Results show that our proposed relationships yield better prediction results than the methods in the literature. Besides, an example of establishing UAV self-awareness ability for the deployed environment via using proposed models is also provided in this paper.

A new software based in-situ training (SBIST) method to achieve high accuracies is proposed for binarized neural networks inference accelerator chips in which measured offsets in sense amplifiers (activation binarizers) are transformed into biases in the training software. To expedite this individual training, the initial values for the weights are taken from results of a common forming training process which is conducted in advance by using the offset fluctuation distribution averaged over the fabrication line. SPICE simulation inference results for the accelerator predict that the accuracy recovers to higher than 90% even when the amplifier offset is as large as 40mV only after a few epochs of the individual training.

Low-density parity-check (LDPC) codes are widely used in communication systems for their high error-correcting performance. This survey introduces the elements of LDPC codes: decoding algorithms, code construction, encoding algorithms, and several classes of LDPC codes.

In this study, we consider fake message attacks in sparse mobile ad hoc networks, in which nodes are chronically isolated. In these networks, messages are delivered to their destination nodes using store-carry-forward routing, where they are relayed by some nodes. Therefore, when a node has messages in its buffer, it can falsify the messages easily. When malicious nodes exist in the network, they alter messages to create fake messages, and then they launch fake message attacks, that is, the fake messages are spread over the network. To analyze the negative effects of a fake message attack, we model the system dynamics without attack countermeasures using a Markov chain, and then formalize some performance metrics (i.e., the delivery probability, mean delivery delay, and mean number of forwarded messages). This analysis is useful for designing countermeasures. Moreover, we consider a hash-based countermeasure against fake message attacks using a hash of the message. Whenever a node that has a message and its hash encounters another node, it probabilistically forwards only one of them to the encountered node. By doing this, the message and the hash value can be delivered to the destination node via different relay nodes. Therefore, even if the destination node receives a fake message, it can verify the legitimacy of the received message. Through simulation experiments, we evaluate the effectiveness of the hash-based countermeasure.