We developed a Nb 4-layer process for fabricating superconducting integrated circuits that involves using caldera planarization to increase the flexibility and reliability of the fabrication process. We call this process the planarized high-speed standard process (PHSTP). Planarization enables us to flexibly adjust most of the Nb and SiO2 film thicknesses; we can select reduced film thicknesses to obtain larger mutual coupling depending on the application. It also reduces the risk of intra-layer shorts due to etching residues at the step-edge regions. We describe the detailed process flows of the planarization for the Josephson junction layer and the evaluation of devices fabricated with PHSTP. The results indicated no short defects or degradation in junction characteristics and good agreement between designed and measured inductances and resistances. We also developed single-flux-quantum (SFQ) and adiabatic quantum-flux-parametron (AQFP) logic cell libraries and tested circuits fabricated with PHSTP. We found that the designed circuits operated correctly. The SFQ shift-registers fabricated using PHSTP showed a high yield. Numerical simulation results indicate that the AQFP gates with increased mutual coupling by the planarized layer structure increase the maximum interconnect length between gates.

This review provides a current overview of the fabrication processes for superconducting digital circuits at CRAVITY (clean room for analog and digital superconductivity) at the National Institute of Advanced Industrial Science and Technology (AIST), Japan. CRAVITY routinely fabricates superconducting digital circuits using three types of fabrication processes and supplies several thousand chips to its collaborators each year. Researchers at CRAVITY have focused on improving the controllability and uniformity of device parameters and the reliability, which means reducing defects. These three aspects are important for the correct operation of large-scale digital circuits. The current technologies used at CRAVITY permit ±10% controllability over the critical current density (Jc) of Josephson junctions (JJs) with respect to the design values, while the critical current (Ic) uniformity is within 1σ=2% for JJs with areas exceeding 1.0 µm2 and the defect density is on the order of one defect for every 100,000 JJs.

Data parallelism is the dominant method used to train deep learning (DL) models on High-Performance Computing systems such as large-scale GPU clusters. When training a DL model on a large number of nodes, inter-node communication becomes bottle-neck due to its relatively higher latency and lower link bandwidth (than intra-node communication). Although some communication techniques have been proposed to cope with this problem, all of these approaches target to deal with the large message size issue while diminishing the effect of the limitation of the inter-node network. In this study, we investigate the benefit of increasing inter-node link bandwidth by using hybrid switching systems, i.e., Electrical Packet Switching and Optical Circuit Switching. We found that the typical data-transfer of synchronous data-parallelism training is long-lived and rarely changed that can be speed-up with optical switching. Simulation results on the Simgrid simulator show that our approach speed-up the training time of deep learning applications, especially in a large-scale manner.

The unattended malicious nodes pose great security threats to the integrity of the IoT sensor networks. However, preventions such as cryptography and authentication are difficult to be deployed in resource constrained IoT sensor nodes with low processing capabilities and short power supply. To tackle these malicious sensor nodes, in this study, the trust computing method is applied into the IoT sensor networks as a light weight security mechanism, and based on the theory of Chebyshev Polynomials for the approximation of time series, the trust data sequence generated by each sensor node is linearized and treated as a time series for malicious node detection. The proposed method is evaluated against existing schemes using several simulations and the results demonstrate that our method can better deal with malicious nodes resulting in higher correct packet delivery rate.

Blockchain-based voting, including liquid voting, has been extensively studied in recent years. However, it remains challenging to implement liquid voting on blockchain using Ethereum smart contract. The challenge comes from the gas limit, which is that the number of instructions for processing a ballot cannot exceed a certain amount. This restricts the application scenario with respect to algorithms whose time complexity is linear to the number of voters, i.e., O(n). As the blockchain technology can well share and reuse the resources, we study a model of liquid voting on blockchain and propose a fast algorithm, named Flash, to eliminate the restriction. The key idea behind our algorithm is to shift some on-chain process to off-chain. In detail, we first construct a Merkle tree off-chain which contains all voters' properties. Second, we use Merkle proof and interval tree to process each ballot with O(log n) on-chain time complexity. Theoretically, the algorithm can support up to 21000 voters with respect to the current gas limit on Ethereum. Experimentally, the result implies that the consumed gas fee remains at a very low level when the number of voters increases. This means our algorithm makes liquid voting on blockchain practical even for massive voters.

In this paper, we focus on developing efficient multi-configuration selection mechanisms by exploiting the spatial degrees of freedom (DoF), and leveraging the simple design benefits of spatial modulation (SM). Notably, the SM technique, as well as its variants, faces the following critical challenges: (i) the performance degradation and difficulty in improving the system performance for higher-level QAM constellations, and (ii) the vast complexity cost in precoder designs particularly for the increasing system dimension and amplitude-phase modulation (APM) constellation dimension. Given this situation, we first investigate two independent modulation domains, i.e., the original signal- and spatial-constellations. By exploiting the analog shift weighting and the virtual spatial signature technologies, we introduce the signature spatial modulation (SSM) concept, which is capable of guaranteing superior trade-offs among spectral- and cost-efficiencies, and system bit error rate (BER) performance. Besides, we develop an analog beamforming for SSM by solving the introduced unconstrained Lagrange dual function minimization problem. Numerical results manifest the performance gain brought by our developed analog beamforming for SSM.

Multi-FPGA systems have been receiving a lot of attention as a low cost and energy efficient system for Multi-access Edge Computing (MEC). For such purpose, a bare-metal multi-FPGA system called FiC (Flow-in-Cloud) is under development. In this paper, we introduce the FiC multi FPGA cluster which is applied partial reconfiguration (PR) FPGA design flow to support online user defined accelerator replacement while executing FPGA interconnection network and its low-level multiple FPGA management software called remote PR manager. With the remote PR manager, the user can define the FiC FPGA cluster setup by JSON and control the cluster from user application with the cooperation of simple cluster management tool / library called ficmgr on the client host and REST API service provider called ficwww on Raspberry Pi 3 (RPi3) on each node. According to the evaluation results with a prototype FiC FPGA cluster system with 12 nodes, using with online application replacement by PR and on-the-fly FPGA bitstream compression, the time for FPGA bitstream distribution was reduced to 1/17 and the total cluster setup time was reduced by 21∼57% than compared to cluster setup with full configuration FPGA bitstream.

Video inpainting is a task of filling missing regions in videos. In this task, it is important to efficiently use information from other frames and generate plausible results with sufficient temporal consistency. In this paper, we present a video inpainting method jointly using affine transformation and deformable convolutions for frame alignment. The former is responsible for frame-scale rough alignment and the latter performs pixel-level fine alignment. Our model does not depend on 3D convolutions, which limits the temporal window, or troublesome flow estimation. The proposed method achieves improved object removal results and better PSNR and SSIM values compared with previous learning-based methods.

A non-volatile memory (NVM) employing MTJ has a lot of strong points such as read/write performance, best endurance and operating-voltage compatibility with standard CMOS. However, it consumes a lot of energy when writing the data. This becomes an obstacle when applying to battery-operated mobile devices. To solve this problem, we propose an approach to augment the capability of the precision scaling technique for the write operation in NVM. Precision scaling is an approximate computing technique to reduce the bit width of data (i.e. precision) for energy reduction. When writing image data to NVM with the precision scaling, the write energy and the image quality are changed according to the write time and the target bit range. We propose an energy-efficient approximate storing scheme for non-volatile flip-flops and a magnetic random-access memory (MRAM) that allows us to write the data by optimizing the bit positions to split the data and the write time for each bit range. By using the statistical model, we obtained optimal values for the write time and the targeted bit range under the trade-off between the write energy reduction and image quality degradation. Simulation results have demonstrated that by using these optimal values the write energy can be reduced up to 50% while maintaining the acceptable image quality. We also investigated the relationship between the input images and the output image quality when using this approach in detail. In addition, we evaluated the energy benefits when applying our approach to nine types of image processing including linear filters and edge detectors. Results showed that the write energy is reduced by further 12.5% at the maximum.

This paper studies a harvested power-oriented simultaneous wireless information and power transfer (SWIPT) scheme over multiple-input multiple-output (MIMO) interference channels in which energy harvesting (EH) circuits exhibit nonlinearity. To maximize the power harvested by all receivers, we propose an algorithm to jointly optimize the transmit beamforming vectors, power splitting (PS) ratios and the receive decoding vectors. As all variables are coupled to some extent, the problem is non-convex and hard to solve. To deal with this non-convex problem, an iterative optimization method is proposed. When two variables are fixed, the third variable is optimized. Specifically, when the transmit beamforming vectors are optimized, the transferred objective function is the sum of several fractional functions. Non-linear sum-of-ratios programming is used to solve the transferred objective function. The convergence and advantage of our proposed scheme compared with traditional EH circuits are validated by simulation results.

Image dehazing is of great significance in computer vision and other fields. The performance of dehazing mainly relies on the precise computation of transmission map. However, the computation of the existing transmission map still does not work well in the sky area and is easily influenced by noise. Hence, the dark channel prior (DCP) and luminance model are used to estimate the coarse transmission in this work, which can deal with the problem of transmission estimation in the sky area. Then a novel weighted variational regularization model is proposed to refine the transmission. Specifically, the proposed model can simultaneously refine the transmittance and restore clear images, yielding a haze-free image. More importantly, the proposed model can preserve the important image details and suppress image noise in the dehazing process. In addition, a new Gaussian Adaptive Weighted function is defined to smooth the contextual areas while preserving the depth discontinuity edges. Experiments on real-world and synthetic images illustrate that our method has a rival advantage with the state-of-art algorithms in different hazy environments.

The increased performance of mobile terminals has made it feasible to collect data using users' terminals. By making the best use of the network performance data widely collected in this way, network operators should deeply understand the current network conditions, identify the performance-degraded components in the network, and estimate the degree of their performance degradation. For their demands, one powerful solution with such end-to-end data measured by users' terminals is network tomography. Meanwhile, with the advance of network virtualization by software-defined networking, routing is dynamically changed due to congestion or other factors, and each end-to-end measurement flow collected from users may pass through different paths between even the same origin-destination node pair. Therefore, it is difficult and costly to identify through which path each measurement flow has passed, so it is also difficult to naively apply conventional network tomography to such networks where the measurement paths cannot be uniquely determined. We propose a novel network tomography for the networks with undeterministic routing where the measurement flows pass through multiple paths in spite of the origin-destination node pair being the same. The basic idea of our method is to introduce routing probability in accordance with the aggregated information of measurement flows. We present two algorithms and evaluate their performances by comparing them with algorithms of conventional tomography using determined routing information. Moreover, we verify that the proposed algorithms are applicable to a more practical network.

The purpose of this paper is to find an automated pricing algorithm to calculate the real cost of each product by considering the associate costs of the business. The methodology consists of two main stages. A brief semi-structured survey and a mathematical calculation the expenses and adding them to the original cost of the offered products and services. The output of this process obtains the minimum recommended selling price (MRSP) that the business should not go below, to increase the likelihood of generating profit and avoiding the unexpected loss. The contribution of this study appears in filling the gap by calculating the minimum recommended price automatically and assisting businesses to foresee future budgets. This contribution has a certain limitation, where it is unable to calculate the MRSP of the in-house created products from raw materials. It calculates the MRSP only for the products bought from the wholesaler to be sold by the retailer.

In vacuum-deposited film composed of organic polar molecules, polarization charges appear on the film surface owing to spontaneous orientation of the molecule. Because its density (σpol) determines an amount of accumulation charge (σacc) in organic light-emitting diodes and output power in polar molecular-based vibrational energy generators (VEGs), control of molecular orientation is highly required. Recently, several groups have reported that dipole-dipole interaction between polar molecules induces anti-parallel orientation which does not contribute to σpol. In other words, perturbation inducing the attenuation of the dipole interaction is needed to enhance σpol. In this study, to investigate an effect of light irradiation on σpol, we prepared 1,3,5-tris(1-phenyl-1H-benzimidazol-2-yl)benzene (TPBi) film under illumination during its deposition, and evaluated the σacc in TPBi-based bilayer device, which equals to σpol. We found that the σacc was increased by light irradiation, indicating that average orientation of TPBi is enhanced. These results suggest that light irradiation during device fabrication is promising process for organic electronic devices including polar molecule-based VEGs.

Various graph algorithms have been developed with multiple random walks, the movement of several independent random walkers on a graph. Designing an efficient graph algorithm based on multiple random walks requires investigating multiple random walks theoretically to attain a deep understanding of their characteristics. The first meeting time is one of the important metrics for multiple random walks. The first meeting time on a graph is defined by the time it takes for multiple random walkers to meet at the same node in a graph. This time is closely related to the rendezvous problem, a fundamental problem in computer science. The first meeting time of multiple random walks has been analyzed previously, but many of these analyses focused on regular graphs. In this paper, we analyze the first meeting time of multiple random walks in arbitrary graphs and clarify the effects of graph structures on expected values. First, we derive the spectral formula of the expected first meeting time on the basis of spectral graph theory. Then, we examine the principal component of the expected first meeting time using the derived spectral formula. The clarified principal component reveals that (a) the expected first meeting time is almost dominated by $n/(1+d_{ m std}^2/d_{ mavg}^2)$ and (b) the expected first meeting time is independent of the starting nodes of random walkers, where n is the number of nodes of the graph. davg and dstd are the average and the standard deviation of weighted node degrees, respectively. Characteristic (a) is useful for understanding the effect of the graph structure on the first meeting time. According to the revealed effect of graph structures, the variance of the coefficient dstd/davg (degree heterogeneity) for weighted degrees facilitates the meeting of random walkers.

Loading test vectors and unloading test responses in shift mode during scan testing cause many scan flip-flops to switch simultaneously. The resulting shift switching activity around scan flip-flops can cause excessive local IR-drop that can change the states of some scan flip-flops, leading to test data corruption. A common approach solving this problem is partial-shift, in which multiple scan chains are formed and only one group of the scan chains is shifted at a time. However, previous methods based on this approach use random grouping, which may reduce global shift switching activity, but may not be optimized to reduce local shift switching activity, resulting in remaining high risk of test data corruption even when partial-shift is applied. This paper proposes novel algorithms (one optimal and one heuristic) to group scan chains, focusing on reducing local shift switching activity around scan flip-flops, thus reducing the risk of test data corruption. Experimental results on all large ITC'99 benchmark circuits demonstrate the effectiveness of the proposed optimal and heuristic algorithms as well as the scalability of the heuristic algorithm.

Scalability of distributed DNN training can be limited by slowdown of specific processes due to unexpected hardware failures. We propose a dynamic process exclusion technique so that training throughput is maximized. Our evaluation using 32 processes with ResNet-50 shows that our proposed technique reduces slowdown by 12.5% to 50% without accuracy loss through excluding the slow processes.

With the development of cameras and sensors and the spread of cloud computing, life logs can be easily acquired and stored in general households for the various services that utilize the logs. However, it is difficult to analyze moving images that are acquired by home sensors in real time using machine learning because the data size is too large and the computational complexity is too high. Moreover, collecting and accumulating in the cloud moving images that are captured at home and can be used to identify individuals may invade the privacy of application users. We propose a method of distributed processing over the edge and cloud that addresses the processing latency and the privacy concerns. On the edge (sensor) side, we extract feature vectors of human key points from moving images using OpenPose, which is a pose estimation library. On the cloud side, we recognize actions by machine learning using only the feature vectors. In this study, we compare the action recognition accuracies of multiple machine learning methods. In addition, we measure the analysis processing time at the sensor and the cloud to investigate the feasibility of recognizing actions in real time. Then, we evaluate the proposed system by comparing it with the 3D ResNet model in recognition experiments. The experimental results demonstrate that the action recognition accuracy is the highest when using LSTM and that the introduction of dropout in action recognition using 100 categories alleviates overfitting because the models can learn more generic human actions by increasing the variety of actions. In addition, it is demonstrated that preprocessing using OpenPose on the sensor side can substantially reduce the transfer quantity from the sensor to the cloud.

With the widespread diffusion of Internet of Things (IoT), the number of applications using wireless sensor devices are increasing, and Quality of Service (QoS) required for these applications is diversifying. Thus, it becomes difficult to satisfy a variety of QoS with a single wireless system, and many kinds of wireless systems are working in the same domains; time, frequency, and place. This paper considers coexistence environments of ZigBee and Wi-Fi networks, which use the same frequency band channels, in the same place. In such coexistence environments,ZigBee devices suffer radio interference from Wi-Fi networks, which results in severe ZigBee packet losses because the transmission power of Wi-Fi is much higher than that of ZigBee. Many existing methods to avoid interference from Wi-Fi networks focus on only one of time, frequency, or space domain. However, such avoidance in one domain is insufficient particularly in near future IoT environments where more ZigBee devices and Wi-Fi stations transfer more amount of data. Therefore, in this paper, we propose joint channel allocation and routing in both frequency and space domains. Finally, we show the effectiveness of the proposed method by computer simulation.

An encoder-decoder (Enc-Dec) model is one of the fundamental architectures in many computer vision applications. One desired property of a trained Enc-Dec model is to feasibly encode (and decode) diverse input patterns. Aiming to obtain such a model, in this paper, we propose a simple method called curiosity-guided fine-tuning (CurioFT), which puts more weight on uncommon input patterns without explicitly knowing their frequency. In an experiment, we evaluated CurioFT in a task of future frame generation with the CUHK Avenue dataset and found that it reduced the mean square error by 7.4% for anomalous scenes, 4.8% for common scenes, and 6.6% in total. Some other experiments with the UCSD dataset further supported the reasonability of the proposed method.