HTTP Adaptive Streaming (HAS) has become a popular solution for media delivery over the mobile Internet. However, existing HAS systems are based on the pull-based HTTP/1.1 protocol, leading to high overheads (e.g., in terms of energy, processing, bandwidth) for clients, servers, as well as network nodes. The new HTTP/2 protocol provides a server push feature, which allows the client to receive more than one video segment for each request in order to reduce request-related overheads. In this study, we propose an adaptation method to leverage the push feature of HTTP/2. Our method takes into account not only the request-related overhead but also buffer stability and gradual transitions. The experimental results show that our proposed method performs well under strong throughput variations of mobile networks.

Automatic music transcription from audio has long been one of the most intriguing problems and a challenge in the field of music information retrieval, because it requires a series of low-level tasks such as onset/offset detection and F0 estimation, followed by high-level post-processing for symbolic representation. In this paper, a comprehensive transcription system for monophonic singing voice based on harmonic structure analysis is proposed. Given a precise tracking of the fundamental frequency, a novel acoustic feature is derived to signify the harmonic structure in singing voice signals, regardless of the loudness and pitch. It is then used to generate a parametric mixture model based on the von Mises-Fisher distribution, so that the model represents the intrinsic harmonic structures within a region of smoothly connected notes. To identify the note boundaries, the local homogeneity in the harmonic structure is exploited by two different methods: the self-similarity analysis and hidden Markov model. The proposed system identifies the note attributes including the onset time, duration and note pitch. Evaluations are conducted from various aspects to verify the performance improvement of the proposed system and its robustness, using the latest evaluation methodology for singing transcription. The results show that the proposed system significantly outperforms other systems including the state-of-the-art systems.

The transmission on fronthaul links in the cloud radio access network has become a bottleneck with the increasing data rate. In this paper, we propose a novel two-stage compression scheme for fronthaul links. In the first stage, the commonly used techniques like cyclic prefix stripping and sampling rate adaptation are implemented. In the second stage, a structure called linear prediction coding with decision threshold (LPC-DT) is proposed to remove the redundancies of signal. Considering that the linear prediction outputs have large dynamic range, a two-piecewise quantization with optimized decision threshold is applied to enhance the quantization performance. In order to further lower the transmission rate, a multi-level successive structure of lossless polar source coding is proposed to compress the quantization output with low encoding and decoding complexity. Simulation results demonstrate that the proposed scheme with LPC-DT and LPSC offers not only significantly better compression ratios but also more flexibility in bandwidth settings compared with traditional ones.

This paper proposes a practical application of Massive MIMO technology, Massive Antenna Systems for Wireless Entrance (MAS-WE), and along with related inter-user interference cancellation (IUIC) and scheduling techniques. MAS-WE, in which the entrance base station (EBS) employs a large number of antennas, can effectively provide high capacity wireless entrance links to a large number of access points (APs) distributed over a wide coverage area. The proposed techniques are simplified to practical implementation; EBS side uses around 100 antenna elements to spatially multiplex more than 16 signal streams. SIR performance is evaluated by system level simulations that consider imperfect channel state information (CSI). The results show that MAS-WE with the proposed techniques can reliably achieve high spectral efficiency with high level space division multiplexing.

In autonomous vehicles, driving in traffic poses significant challenges in vehicle-to-vehicle (V2V) communication and ranging. Currently interest centers on enhanced V2V communication with multi-sensor and cooperative approaches. In this paper we propose a novel bidirectional Laser Radar Visible Light Bidirectional Communication Boomerang System (LRVLB-ComBo). LRVLB-ComBo affords nuanced real-time two-way V2V communication as a basis for complex but reliable decision-making. Our approach involves combining existing automotive laser radar with visible light boomerang systems using THSS techniques. System simulations were performed using a random mix of extraneous interference pulse to evaluate system sensitivity to noise. Results suggest that LRVLB-ComBo is a viable two-way V2V communication system with increased ranging accuracy, enabling provision of detailed bidirectional data exchange for ITS precision, energy efficiency and safety.

Improvement of conventional networks with an incremental approach is an important design method for the development of the future internet. For this approach, we are developing a future aggregation network based on passive optical network (PON) technology to achieve both cost-effectiveness and high reliability. In this paper, we propose a timeslot (TS) synchronization method for sharing a TS from an optical burst mode transceiver between any route of arbitrary fiber length by changing both the route of the TS transmission and the TS control timing on the optical burst mode transceiver. We show the effectiveness of the proposed method for exchanging TSs in bidirectional bufferless wavelength division multiplexing (WDM) and time division multiplexing (TDM) multi-ring networks under the condition of the occurrence of a link failure through prototype systems. Also, we evaluate the reduction of the required number of optical interfaces in a multi-ring network by applying the proposed method.

In this paper, an accurate experimental noise model to improve the EEHEMT nonlinear model using the Verilog-A language in Agilent ADS is presented for the first time. The present EEHEMT model adopts channel noise to model the noise behavior of pseudomorphic high electron mobility transistor (pHEMT). To enhance the accuracy of the EEHEMT noise model, we add two extra noise sources: gate shot noise and induced gate noise current. Here we demonstrate the power spectral density of the channel noise Sid and gate noise Sig versus gate-source voltage for 0.25 µm pHEMT devices. Additionally, the related noise source parameters, i.e., P, R, and C are presented. Finally, we compare four noise parameters between the simulation and model, and the agreement between the measurement and simulation results shows that this proposed approach is dependable and accurate.

Key fabrication technology for the Pt/TiO2-x/TiO2/TiO2+x/Pt nano-film memristor is investigated, including preparing platinum (Pt) electrodes and TiO2-x/TiO2/TiO2+x nano-films. The effect of oxygen flow rate and deposition rate during fabrication on O:Ti ratio of thin films is demonstrated. The fabricated nano-films with different oxygen concentration are validated by the analyzed results from X-ray photoelectron spectroscopy (XPS). The obtained memristor device shows the typical resistive switching behavior and nonvolatile memory effects. An analytical device model for Pt/TiO2-x/TiO2/TiO2+x/Pt nano-film memristor is developed based on the fundamental linear relationships between drift-diffusion velocity and the electric field, and boundary conditions are also incorporated in this model. This model is able to predict the relation between variables in the form of explicit formula, which is very critical in memristor-based circuit designs. The measurement results from real devices validate the proposed analytical device model. Some deviations of the model from the measured data are also analyzed and discussed.

New volatile memory (e.g. Phase Change Memroy) presents fast access, large capacity, byte-addressable, and non-volatility features. These features will bring impacts on the design of current software system. It has become a hot research topic of how to manage it and provide what kind of interface for upper application to use it. This paper proposes FP-Heap. FP-Heap supports direct access to non-volatile memory through a persistent heap interface. With FP-Heap, traditional persistent object systems can benefit directly from the byte-persistency of non-volatile memory. FP-Heap extends current virtual memory manager (VMM) to manage non-volatile memory and maintain a persistent mapping relationship. Also, FP-Heap offers a lightweight transaction mechanism to support atomic update of persistent data, a simple namespace to facilitate data indexing, and a basic access control mechanism to support data sharing. Compared with previous work Mnemosyne, FP-Heap achieves higher performance by its customized VMM and optimized transaction mechanism.

In this paper, we have investigated the characteristics of PdYb-silicide layer formed by the silicidation of Pd/Yb/n-Si(100) stacked structures for the first time. Pd (12-20 nm)/Yb (0-8 nm) stacked layers were deposited on n-Si(100) substrates by the RF magnetron sputtering at room temperature. Then, 10 nm-thick HfN encapsulating layer was deposited at room temperature. Next, silicidation was carried out by the RTA at 500°C/1 min in N2 followed by the selective etching. From the J-V characteristics of fabricated Schottky diode, Schottky barrier height (SBH) for electron was reduced from 0.73 eV of Pd2Si to 0.4 eV of PdYb-silicide in case the Pd/Yb thicknesses were 14/6 nm, respectively.

In this letter, a new and accurate frequency estimation method of complex exponential signals is proposed. The proposed method divides the signal samples into several identical segments and sums up the samples belonging to the same segment respectively. Then it utilizes fast Fourier transform (FFT) algorithm with zero-padding to obtain a coarse estimation, and exploits three Fourier coefficients to interpolate a fine estimation based on least square error (LSE) criterion. Numerical results show that the proposed method can closely approach the Cramer-Rao bound (CRB) at low signal-to-noise ratios (SNRs) with different estimation ranges. Furthermore, the computational complexity of the proposed method is proportional to the estimation range, showing its practical-oriented ability. The proposed method can be useful in several applications involving carrier frequency offset (CFO) estimation for burst-mode satellite communications.

In this letter, we propose a Hadoop-based Video Transcoding System (HVTS), which is designed to run on all major cloud computing services. HVTS is highly adapted to the structure and policies of Hadoop, thus it has additional capacities for transcoding, task distribution, load balancing, and content replication and distribution. To evaluate, our proposed system, we carry out two performance tests on our local testbed, transcoding and robustness to data node and task failures. The results confirmed that our system delivers satisfactory performance in facilitating seamless streaming services in cloud computing environments.

Focused on network reconnaissance, eavesdropping, and DoS attacks caused by static routing policies, this paper designs a random routing mutation architecture based on the OpenFlow protocol, which takes advantages of the global network view and centralized control in a software-defined network. An entropy matrix of network traffic characteristics is constructed by using volume measurements and characteristic measurements of network traffic. Random routing mutation is triggered according to the result of network anomaly detection, which using a wavelet transform and principal component analysis to handle the above entropy matrix for both spatial and temporal correlations. The generation of a random routing path is specified as a 0-1 knapsack problem, which is calculated using an improved ant colony algorithm. Theoretical analysis and simulation results show that the proposed method not only increases the difficulty of network reconnaissance and eavesdropping but also reduces the impact of DoS attacks on the normal communication in an SDN network.

To ensure secure mobile communication, the communicating entities must know their mutual identities. The entities which need to be identified in a mobile communication system are mobile devices and the network. Third Generation Partnership Project (3GPP) has specified Evolved Packet System Authentication and Key Agreement (EPS AKA) procedure for the mutual authentication of user and the Long Term Evolution (LTE) network. EPS AKA certainly overcomes most of the vulnerabilities in the Global System for Mobile Communications (GSM) and Universal Mobile Telecommunication System (UMTS) access procedures. However, the LTE access procedure still has security weaknesses against some of the sophisticated security threats, such as, Denial-of-Service (DoS) attacks, Man-in-the-Middle (MitM) attacks, rogue base station attacks and fails to ensure privacy protection for some of the important parameters. This paper proposes an improved security framework for the LTE access procedure by ensuring the confidentiality protection of International Mobile Subscriber Identity (IMSI) and random-challenge RAND. Also, our proposed system is designed to reduce the impact of DoS attacks which try to overwhelm the network with useless computations. We use a one-time shared key with a short lifetime between the UE and MME to protect IMSI and RAND privacy. Finally, we explore the parameters design for the proposed system which leads to satisfy the requirements imposed on computational load and latency as well as security strength.

In this paper, a miniaturized absorptive/transmissive radome with switchable passband and wide absorbing band is designed. Pin diodes are loaded on the radome in order to obtain switchable passband and miniaturized unit cells, while the resistor loaded double square loops are used to absorb the incident wave. The total thickness of the radome is only 4.5mm. Its transmission and absorbing properties are verified by both synthetic experiments and measurements in the anechoic chamber. Furthermore, the switchable passband of the radome is also evaluated using a waveguide simulator.

This paper proposes performance improvement schemes for non-coherent multiple-input multiple-output (MIMO) communication systems employing per transmit antenna differential mapping (PADM). PADM is one form of differential space-time coding (DSTC), which generates an independent differentially encoded sequence for each of the multiple transmit antennas by means of space-time coding and mapping. The features of the proposed schemes are as follows: 1) it employs an asymmetric space-time mapping instead of the conventional symmetric space-time mapping in order to lower the required signal to noise power ratio (SNR) for maintaining the bit error rate (BER) performance; 2) it employs an analytically derived branch metric criterion based on channel prediction for per-survivor processing (PSP) in order to track fast time-varying channels. Finally, computer simulation results confirm that the proposed schemes improve the required SNR by around 1dB and can track at the maximum Doppler frequency normalized by symbol rate of 5%.

In this paper, for an odd prime p, two positive integers n, m with n=2m, and pm≡1 (mod 4), we derive an upper bound on the magnitude of the cross-correlation function between two decimated sequences of a p-ary m-sequence. The two decimation factors are 2 and 2(pm+1), and the upper bound is derived as $rac{3}{2}p^m + rac{1}{2}$. In fact, those two sequences correspond to the p-ary sequences used for the construction of Kasami sequences decimated by 2. This result is also used to obtain an upper bound on the cross-correlation magnitude between a p-ary m-sequence and its decimated sequence with the decimation factor $d=rac{(p^m +1)^2}{2}$.

In this paper, the performance of orthogonal space-time block codes (OSTBC) for distributed multiple-input multiple-output (MIMO) systems employing adaptive M-QAM transmission is investigated over independent but not necessarily identically distributed (i.n.i.d.) generalized-K fading channels with arbitrary positive integer-valued k(inversely reflects the shadowing severity) and m (inversely reflects the fading severity). Before this, i.n.i.d. generalized-K fading channel has never been considered for distributed OSTBC-MIMO systems. Especially, the effects of the shape parameter k on the distributed OSTBC-MIMO system performance are unknown. Thus, we investigate mainly the significance of the shape parameter k on the distributed OSTBC-MIMO system performance, in terms of the average symbol error probability (SEP), outage probability, and spectral efficiency (SE). By establishing the system model, the approximated probability density function (PDF) of the equivalent signal to noise ratio (SNR) is derived and thereafter the approximated closed-form expressions of the above performance metrics are obtained successively. Finally, the derived expressions are validated via a set of Monte-Carlo simulations and the implications of the shape parameter k on the overall performance are highlighted.

Transfer boosting, a branch of instance-based transfer learning, is a commonly adopted transfer learning method. However, currently popular transfer boosting methods focus on binary classification problems even though there are many multi-classification tasks in practice. In this paper, we developed a new algorithm called MultiTransferBoost on the basis of TransferBoost for multi-classification. MultiTransferBoost firstly separated the multi-classification problem into several orthogonal binary classification problems. During each iteration, MultiTransferBoost boosted weighted instances from different source domains while each instance's weight was assigned and updated by evaluating the difficulty of the instance being correctly classified and the “transferability” of the instance's corresponding source domain to the target. The updating process repeated until it reached the predefined training error or iteration number. The weight update factors, which were analyzed and adjusted to minimize the Hamming loss of the output coding, strengthened the connections among the sub binary problems during each iteration. Experimental results demonstrated that MultiTransferBoost had better classification performance and less computational burden than existing instance-based algorithms using the One-Against-One (OAO) strategy.

Long-distance wireless local area networks (WLANs) are the key enablers of wide-area and low-cost access networks in rural areas. In a WLAN, the long propagation delay between an access point (AP) and stations (STAs) significantly degrades the throughput and creates a throughput imbalance because the delay causes unexpected frame collisions. This paper summarizes the problems caused in the medium access control (MAC) mechanism of the WLAN by a long propagation delay. We propose a MAC protocol for solving the delay-induced throughput degradation and the throughput imbalance between the uplink and the downlink in WLANs to address these problems. In the protocol, the AP extends NAV duration of CTS frame to protect an ACK frame and transmits its data frame to avoid delay induced frame collisions by piggybacking on the ACK frame transmission. We also provide a throughput model for the proposed protocol based on the Bianchi model. A numerical analysis using the proposed throughput model and simulation evaluation demonstrate that the proposed protocol increases the system throughput by 150% compared with that obtained using the conventional method, and the uplink throughput can be increased to the same level as the downlink throughput.