Recently, the demand for the digitization of manga is increased. Then, in the case of an old manga where the original pictures have been lost, we have to digitize it from comics. However, the show-through phenomenon would be caused by scanning of the comics since it is represented as the double sided images. This letter proposes the manga show-through cancellation method based on the deep convolutional neural network (CNN). Numerical results show that the effectiveness of the proposed method.

Visual tracking has been studied for several decades but continues to draw significant attention because of its critical role in many applications. This letter handles the problem of fixed template size in Kernelized Correlation Filter (KCF) tracker with no significant decrease in the speed. Extensive experiments are performed on the new OTB dataset.

A new hybrid brain-computer interface (BCI), which is based on sequential controls by eye tracking and steady-state visual evoked potentials (SSVEPs), has been proposed for high-speed spelling in virtual reality (VR) with a 40-target virtual keyboard. During target selection, gaze point was first detected by an eye-tracking accessory. A 4-target block was then selected for further target selection by a 4-class SSVEP BCI. The system can type at a speed of 1.25 character/sec in a cue-guided target selection task. Online experiments on three subjects achieved an averaged information transfer rate (ITR) of 360.7 bits/min.

Automatic monitoring of food intake in free living conditions is still an open problem to solve. This paper presents a novel necklace-type wearable system embedded with a piezoelectric sensor to monitor ingestive behavior by detecting skin motion from the lower trachea. Detected events are incorporated for food classification. Unlike the previous state-of-the-art piezoelectric sensor based system that employs spectrogram features, we have tried to fully exploit time-domain based signals for optimal features. Through numerous evaluations on the length of a frame, we have found the best performance with a frame length of 70 samples (3.5 seconds). This demonstrates that the chewing sequence carries important information for food classification. Experimental results show the validity of the proposed algorithm for food intake detection and food classification in real-life scenarios. Our system yields an accuracy of 89.2% for food intake detection and 80.3% for food classification over 17 food categories. Additionally, our system is based on a smartphone app, which helps users live healthy by providing them with real-time feedback about their ingested food episodes and types.

In this study, we evaluated the electro-optical characteristics and structural stability in curved state of dye-doped liquid crystal (LC) gel film for stretchable displays. As the results, maximum contrast ratio of 6.7:1 and suppression of LC flow were achieved by optimum of blend condition such as gelator and dye concentration.

In this paper, we review a super-steep subthreshold slope (SS) (<1 mV/dec) body-tied (BT) silicon on insulator (SOI) metal oxide semiconductor field effect transistor (MOSFET) fabricated with 0.15 µm SOI technology and discuss the possibility of its use in ultralow voltage applications. The mechanism of the super-steep SS in the BT SOI MOSFET was investigated with technology computer-aided design simulation. The gate length/width and Si thickness optimizations promise further reductions in operation voltage, as well as improvement of the ION/IOFF ratio. In addition, we demonstrated control of the threshold voltage and hysteresis characteristics using the substrate and body bias in the BT SOI MOSFET.

Smallcells have recently emerged as a potential approach for local area deployments that can satisfy high data rate requirements, reduce energy consumption and enhance network coverage. In this paper, we work on maximizing the weighted sum energy efficiency (WS-EE) for densely deployed smallcell networks. Due to the combinatorial and the general fractional program nature of the resource allocation problem, WS-EE maximization is non-convex and the optimal joint resource blocks (RBs) and power allocation is NP-hard. To solve this complex problem, we propose to decompose the primal problem into two subproblems (referred as RBs allocation and power control) and solve the subproblems sequentially. For the RBs allocation subproblem given any feasible network power profile, the optimal solution can be solved by maximizing throughput locally. For the power control subproblem, we propose to solve it locally based on a new defined pricing factor. Then, a distributed power control algorithm with guaranteed convergence is designed to achieve a Karush-Kuhn-Tucker (KKT) point of the primal problem. Simulation results verify the performance improvement of our proposed resource allocation scheme in terms of WS-EE. Besides, the performance evaluation shows the tradeoff between the WS-EE and the sum rate of the smallcell networks.

As real-time embedded systems are required to accommodate various tasks with different levels of criticality, scheduling algorithms for MC (Mixed-Criticality) systems have been widely studied in the real-time systems community. Most studies have focused on MC uniprocessor systems whereas there have been only a few studies to support MC multiprocessor systems. In particular, although the ZL (Zero-Laxity) policy has been known to an effective technique in improving the schedulability performance of base scheduling algorithms on SC (Single-Criticality) multiprocessor systems, the effectiveness of the ZL policy on MC multiprocessor systems has not been revealed to date. In this paper, we focus on realizing the potential of the ZL policy for MC multiprocessor systems, which is the first attempt. To this end, we design the ZL policy for MC multiprocessor systems, and apply the policy to EDF (Earliest Deadline First), yielding EDZL (Earliest Deadline first until Zero-Laxity) tailored for MC multiprocessor systems. Then, we develop a schedulability analysis for EDZL (as well as its base algorithm EDF) to support its timing guarantee. Our simulation results show a significant schedulability improvement of EDZL over EDF, demonstrating the effectiveness of the ZL policy for MC multiprocessor systems.

Binary sparse representation based on arbitrary quality metrics and its applications are presented in this paper. The novelties of the proposed method are twofold. First, the proposed method newly derives sparse representation for which representation coefficients are binary values, and this enables selection of arbitrary image quality metrics. This new sparse representation can generate quality metric-independent subspaces with simplification of the calculation procedures. Second, visual saliency is used in the proposed method for pooling the quality values obtained for all of the parts within target images. This approach enables visually pleasant approximation of the target images more successfully. By introducing the above two novel approaches, successful image approximation considering human perception becomes feasible. Since the proposed method can provide lower-dimensional subspaces that are obtained by better image quality metrics, realization of several image reconstruction tasks can be expected. Experimental results showed high performance of the proposed method in terms of two image reconstruction tasks, image inpainting and super-resolution.

This paper proposes a directional noise suppressor with a specified constant beamwidth for directional interferences and diffuse noise. A directional gain is calculated based on interchannel phase difference and combined with a spectral gain commonly used in single-channel noise suppressors. The beamwidth can be specified as passband edges of the directional gain. In order to implement frequency-independent constant beamwidth, frequency-proportionate directional gains are defined for different frequencies as a constraint. Evaluation with signals recorded by a commercial PC demonstrates good agreement between the theoretical and the measured directivity. The signal-to-noise ratio improvement and the PESQ score for the enhanced signal are improved by 24.4dB and 0.3 over a conventional noise suppressor. In a speech recognition scenario, the proposed directional noise suppressor outperforms both the conventional nondirectional noise suppressor and the conventional directional noise suppressor based on phase based T/F filtering with a negligible degradation in the word error rate for clean speech.

This paper discusses VDT syndrome from the point of view of the viewing distance between a computer screen and user's eyes. This paper conducts a series of experiments to show an impact of the viewing distance on task performance. In the experiments, two different viewing distances of 50cm and 350cm with the same viewing angle of 30degrees are taken into consideration. The results show that the long viewing distance enables people to manipulate the mouse more slowly, more correctly and more precisely than the short.

In this paper, we propose an IEEE 802.15.10-based layer 2 routing (L2R) method with a load balancing algorithm; the proposal considers fairness in terms of the cumulative number of sending packets at each terminal to resolve the packet concentration problem for the IEEE 802.15.4-based low-power consumption wireless smart utility network (Wi-SUN) systems. The proposal uses the accumulated sending times of each terminal as a weight in calculating each path quality metric (PQM) to decide multi-hopping routes with load balancing in the network. Computer simulation of the mesh network with 256 terminals shows that the proposed routing method can improve the maximum sending ratio (MSR), defined as the ratio of the maximum sending times to the average number of sending times in the network, by 56% with no degradation of the end-to-end communication success ratio (E2E-SR). The proposed algorithm is also experimentally evaluated by using actual Wi-SUN modules. The proposed routing method also improves the MSR by 84% with 70 terminals. Computer simulations and experiments prove the effectiveness of the proposed method in terms of load balancing.

In an approximately synchronized (AS) code-division multiple-access (CDMA) communication system, zero correlation zone (ZCZ) sequences can be used as its spreading sequences so that the system suppresses multiple access interference (MAI) and multi-path interference (MPI) fully and synchronously. In this letter, the mutually orthogonal (MO) ZCZ polyphase sequence sets proposed by one of the authors are improved, and the resultant ZCZ sequences in each set arrive at the theoretical bound regarding ZCZ sequences under some conditions. Therefore, the improved MO ZCZ sequence sets are optimal.

This paper theoretically revisits linear passive two-port systems from the viewpoint of power transfer. Instead of using the conventional S21 magnitude, we propose generalizing the kQ product as a figure of merit for two-port performance evaluation. We explore three examples of power transfer schemes, i.e. inductive, capacitive, and resistive channels. Starting from their voltage-current equations, the kQ formula is analytically derived for each scheme. The resultant formulas look different in appearance but are all physically consistent with ωM/R, which stems from the original definition of kQ product in a primitive transformer. After comprehensively learning from the three examples, we finally extend the theory to a black-box model that represents any kind of power transfer channel. In terms of general two-port Z-parameters, useful mathematical expressions are deduced for the optimum load, input impedance, and maximum power transfer efficiency. We also supplement the theory with helpful graphics that explain how the generalized kQ behaves as a function of the circuit parameters.

A hexagonal waveguide branch line coupler suitable for additive manufacturing is proposed in this study, and its design method is elucidated. The additive manufactured Ka-band coupler exhibits characteristics similar to those of a machined coupler, but its weight and cost are reduced by 40% and 60%, respectively. Its effectiveness is also confirmed in this study.

The paper presents the analysis, design and performance of PCB (Printed Circuit Board)-based cross-coupled differential VCOs using a novel LC-tank. As compared with the conventional LC-tank, a novel LC-tank is comprised of only chip inductors and thus has an advantage in providing a higher cutoff frequency. This feature attributes to the use of the parasitic elements of the chip inductors and capacitors. The cutoff frequencies were compared for both LC-tanks by calculation, simulation and measurement. Then the traditional cross-coupled differential oscillators having both LC-tanks were designed, fabricated and performed by using 0.35µm SiGe HBTs and 1005-type chip devices. The implemented oscillator using a novel LC-tank has shown a 0.12GHz higher oscillation frequency, while phase noise characteristics were almost the same. In addition, the cross-coupled differential oscillator utilizes a series RL circuit in order to suppress the concurrent oscillations. The implemented cross-coupled differential VCO employing Si varactor diodes with a capacitance ratio of 2.5 to 1 has achieved a tuning frequency of 0.92 to 1.28GHz, an output power greater than -13.5dBm, a consumed power less than 8.7mW and a phase noise at 100kHz offset in a range from -104 to -100dBc/Hz.

The research on inertial sensor based human action detection and recognition (HADR) is a new area in machine learning. We propose a novel time sequence based interval convolutional neutral networks framework for HADR by combining interesting interval proposals generator and interval-based classifier. Experiments demonstrate the good performance of our method.

Multiple description (MD) coding is an attractive framework for robust information transmission over non-prioritized and unpredictable networks. In this paper, a novel MD image coding scheme is proposed based on convolutional neural networks (CNNs), which aims to improve the reconstructed quality of side and central decoders. For this purpose initially, a given image is encoded into two independent descriptions by sub-sampling. Such a design can make the proposed method compatible with the existing image coding standards. At the decoder, in order to achieve high-quality of side and central image reconstruction, three CNNs, including two side decoder sub-networks and one central decoder sub-network, are adopted into an end-to-end reconstruction framework. Experimental results show the improvement achieved by the proposed scheme in terms of both peak signal-to-noise ratio values and subjective quality. The proposed method demonstrates better rate central and side distortion performance.

In this letter, a new semi-blind approach incorporating the bounded nature of communication sources with the distance between the equalizer outputs and the training sequence is proposed. By utilizing the sparsity property of l1-norm cost function, the proposed algorithm can outperform the semi-blind method based on higher-order statistics (HOS) criterion especially for transmitting sources with non-constant modulus. Experimental results demonstrate that the proposed method shows superior performance over the HOS based semi-blind method and the classical training-based method for QPSK and 16QAM sources equalization. While for 64QAM signal inputs, the proposed algorithm exhibits its superiority in low signal-to-noise-ratio (SNR) conditions compared with the training-based method.

This paper describes a novel composite right-/left-handed (CRLH) transmission line (TL) stub resonator for X-band low phase-noise oscillator application. The bandpass filter type resonator composed only of microstrip components exhibits unloaded-Q exceeding that of microstrip-line resonators by engineering the dispersion relation for the CRLH TL. Two different types of stub resonator using identical and non-identical unit-cells are compared. Although the latter type was found to be superior to the former in terms of spurious frequency responses and the circuit size, care was taken to prevent the parasitic inductances distributed in the interdigital capacitors from impeding the Q-factor control capability of the resonator. The stub resonator thus optimized was applied to an 8.8-GHz SiGe HBT oscillator, which achieved a phase-noise of -134dBc/Hz at 1-MHz offset despite the modest dielectric loss tangent of the PCB laminate used as the substrate of the circuit.