This paper proposes an algorithm for estimating the location of wireless access points (APs) in indoor environments to realize smartphone positioning based on Wi-Fi without pre-constructing a database. The proposed method is designed to overcome the main problem of existing positioning methods requiring the advance construction of a database with coordinates or precise AP location measurements. The proposed algorithm constructs a local coordinate system with the first four APs that are activated in turn, and estimates the AP installation location using Wi-Fi round-trip time (RTT) lateration and the ranging results between the APs. The effectiveness of the proposed algorithm is confirmed by conducting experiments in a real indoor environment consisting of two rooms of different sizes to evaluate the positioning performance of the algorithm. The experimental results showed the proposed algorithm using Wi-Fi RTT lateration delivers high smartphone positioning performance without a pre-constructed database or precise AP location measurements.

In this paper, we compare performances of train localization schemes by the dynamic programming of various sensor information obtained from a smartphone attached to a train, and further discuss the most superior sensor information and scheme in this localization system. First, we compare the localization performances of single sensor information schemes, such as 3-axis acceleration information, acoustic information, 3-axis magnetic information, and barometric pressure information. These comparisons reveal that the lateral acceleration information input scheme has the best localization performance. Furthermore, we optimize each data fusion scheme and compare the localization performances of the data-fusion schemes using the optimal ratio of coefficients. The results show that the hybrid scheme has the best localization performance, with a root mean squared error (RMSE) of 12.2 m. However, there are no differences between the RMSEs of the input fusion scheme and 3-axis acceleration input scheme in the most significant three digits. Consequently, we conclude that the 3-axis acceleration input fusion scheme is the most reasonable in terms of simplicity.

To simultaneously enhance data rate and physical layer security (PLS) for low-luminance smartphone screen to camera uplink communication, space division multiplexing using high-luminance cell-size reduction arrangement is numerically analyzed and experimentally verified. The uplink consists of a low-luminance smartphone screen and an indoor telephoto camera at a long distance of 3.5 meters. The high-luminance cell-size reduction arrangement avoids the influence of spatial inter-symbol interference (ISI) and ambient light to obtain a stable low-luminance screen. To reduce the screen luminance without decreasing the screen pixel value, the arrangement reduces only the high-luminance cell area while keeping the cell spacing. In this study, two technical issues related to high-luminance cell-size reduction arrangement are solved. First, a numerical analysis and experimental results show that the high-luminance cell-size reduction arrangement is more effective in reducing the spatial ISI at low luminance than the conventional low-luminance cell arrangement. Second, in view point of PLS enhancement at wide angles, symbol error rate should be low in front of the screen and high at wide angles. A numerical analysis and experimental results show that the high-luminance cell-size reduction arrangement is more suitable for enhancing PLS at wide angles than the conventional low-luminance cell arrangement.

In this study, a blind carrier frequency offset (CFO) estimation method is proposed using the time-frequency symmetry of the transmitted signals of a weighted Fourier transform (WFrFT) communication system. Blind CFO estimation is achieved by focusing on the property that results in matching the signal waveforms before and after the Fourier transform when the WFrFT parameter is set to a certain value. Numerical simulations confirm that the proposed method is more resistant to Rayleigh fading than the conventional estimation methods.

This paper summarizes the modulation configurations of phase locked loops (PLLs) and their integration in semiconductor circuits, e.g., the input modulation for cellular phones, direct-modulation for low power wireless sensor networks, feedback-loop modulation for high-speed transmission, and two-point modulation for short-range radio transceivers. In this survey, basic configuration examples of integrated circuits for wired and wireless applications which are using the PLL modulation configurations are explained. It is important to select the method for simply and effectively determining the characteristics corresponding to the specific application. The paper also surveys technologies for future PLL design for digitizing of an entire PLL to reduce the phase noise due to a modulation by using a feedback loop with a precise digital phase comparison and a numerically controlled oscillator with high linearity.

This paper proposes a deep neural network named BayesianPUFNet that can achieve high prediction accuracy even with few challenge-response pairs (CRPs) available for training. Generally, modeling attacks are a vulnerability that could compromise the authenticity of physically unclonable functions (PUFs); thus, various machine learning methods including deep neural networks have been proposed to assess the vulnerability of PUFs. However, conventional modeling attacks have not considered the cost of CRP collection and analyzed attacks based on the assumption that sufficient CRPs were available for training; therefore, previous studies may have underestimated the vulnerability of PUFs. Herein, we show that the application of Bayesian deep neural networks that incorporate Bayesian statistics can provide accurate response prediction even in situations where sufficient CRPs are not available for learning. Numerical experiments show that the proposed model uses only half the CRP to achieve the same response prediction as that of the conventional methods. Our code is openly available on https://github.com/bayesian-puf-net/bayesian-puf-net.git.

Mutual coupling between antenna array elements will significantly degrade the performance of the array signal processing methods. Due to the Toeplitz structure of mutual coupling matrix (MCM), there exist some mutual coupling calibration algorithms for the uniform linear array (ULA) or uniform circular array (UCA). But few methods for other arrays. In this letter, we derive a new transformation formula for the MCM of the 7-elements hexagonal array (HA-7). Further, we extend two mutual coupling auto-calibration methods from UCA to HA by the transformation formula. Simulation results demonstrate the validity of the proposed two methods.

Reconfigurable intelligent surface (RIS) has the capability of boosting system performance by manipulating the wireless propagation environment. This paper investigates a downlink RIS-aided non-orthogonal multiple access (NOMA) system, where a RIS is deployed to enhance physical-layer security (PLS) in the presence of an eavesdropper. In order to improve the main link's security, the RIS is deployed between the source and the users, in which a reflecting element separation scheme is developed to aid data transmission of both the cell-center and the cell-edge users. Additionally, the closed-form expressions of secrecy outage probability (SOP) are derived for the proposed RIS-aided NOMA scheme. To obtain more deep insights on the derived results, the asymptotic performance of the derived SOP is analyzed. Moreover, the secrecy diversity order is derived according to the asymptotic approximation in the high signal-to-noise ratio (SNR) and main-to-eavesdropper ratio (MER) regime. Furthermore, based on the derived results, the power allocation coefficient and number of elements are optimized to minimize the system SOP. Simulations demonstrate that the theoretical results match well with the simulation results and the SOP of the proposed scheme is clearly less than that of the conventional orthogonal multiple access (OMA) scheme obviously.

Multi-band transmission technologies promise to cost-effectively expand the capacity of optical networks by exploiting low-loss spectrum windows beyond the conventional band used in already-deployed fibers. While such technologies offer a high potential for capacity upgrades, available capacity is seriously restricted not only by the wavelength-continuity constraint but also by the signal-to-noise ratio (SNR) constraint. In fact, exploiting more bands can cause higher SNR imbalance over multiple bands, which is mainly due to stimulated Raman scattering. To relax these constraints, we propose wavelength-selective band switching-enabled networks (BSNs), where each wavelength channel can be freely switched to any band and in any direction at any optical node on the route. We also present two typical optical node configurations utilizing all-optical wavelength converters, which can realize the switching proposal. Moreover, numerical analyses clarify that our BSN can reduce the fiber resource requirements by more than 20% compared to a conventional multi-band network under realistic conditions. We also discuss the impact of physical-layer performance of band switching operations on available benefits to investigate the feasibility of BSNs. In addition, we report on a proof-of-concept demonstration of a BSN with a prototype node, where C+L-band wavelength-division-multiplexed 112-Gb/s dual-polarization quadrature phase-shift keying signals are successfully transmitted while the bands of individual channels are switched node-by-node for up to 4 cascaded nodes.

With the network function virtualization technology, a middlebox can be deployed as software on commercial servers rather than on dedicated physical servers. A backup server is necessary to ensure the normal operation of the middlebox. The workload can affect the failure rate of backup server; the impact of workload-dependent failure rate on backup server allocation considering unavailability has not been extensively studied. This paper proposes a shared backup allocation model of middlebox with consideration of the workload-dependent failure rate of backup server. Backup resources on a backup server can be assigned to multiple functions. We observe that a function has four possible states and analyze the state transitions within the system. Through the queuing approach, we compute the probability of each function being available or unavailable for a certain assignment, and obtain the unavailability of each function. The proposed model is designed to find an assignment that minimizes the maximum unavailability among functions. We develop a simulated annealing algorithm to solve this problem. We evaluate and compare the performances of proposed and baseline models under different experimental conditions. Based on the results, we observe that, compared to the baseline model, the proposed model reduces the maximum unavailability by an average of 29% in our examined cases.

Mobile edge computing (MEC) technology guarantees the privacy and security of large-scale data in the Narrowband-IoT (NB-IoT) by deploying MEC servers near base stations to provide sufficient computing, storage, and data processing capacity to meet the delay and energy consumption requirements of NB-IoT terminal equipment. For the NB-IoT MEC system, this paper proposes a resource allocation algorithm based on deep reinforcement learning to optimize the total cost of task offloading and execution. Since the formulated problem is a mixed-integer non-linear programming (MINLP), we cast our problem as a multi-agent distributed deep reinforcement learning (DRL) problem and address it using dueling Q-learning network algorithm. Simulation results show that compared with the deep Q-learning network and the all-local cost and all-offload cost algorithms, the proposed algorithm can effectively guarantee the success rates of task offloading and execution. In addition, when the execution task volume is 200KBit, the total system cost of the proposed algorithm can be reduced by at least 1.3%, and when the execution task volume is 600KBit, the total cost of system execution tasks can be reduced by 16.7% at most.

To understand the radiation mechanism of an electrically small spherical helix antenna, we develop a theory on the radiation characteristics of the antenna. An analytical model of the antenna presuming a current on the wire to be sinusoidally distributed is proposed and analyzed with the spherical wave expansion. The radiation efficiency, radiation resistance, and radiation patterns are obtained in closed-form expression. The radiation efficiency evidently varies with the surface area of the wire and the radiation resistance depends on the square of the length of the wire. The obtained result for the radiation pattern illustrates the tilt of the pattern caused by the modes asymmetric to the z-axis. The radiation efficiency formula indicates a good agreement between the simulation and measurement result. In addition, the radiation resistance of the theoretical and simulation results exhibits good agreement. Considering the effect of the feeding structure of the fabricated antenna, the radiation resistance of the analytical model can be treated as a reasonable result. The result of radiation pattern also shows good agreement between the simulation and measurement results excluding a small contribution from the feeding cable acting as a scatterer.

This paper proposes a scheme that reduces residual self-interference significantly in the analog-circuit domain on wireless full-duplex relay systems. Full-duplex relay systems utilize the same time and frequency resources for transmission and reception at the relay node to improve spectral efficiency. Our proposed scheme measures multiple responses of the feedback path by changing the direction of the main beam of the transmitter at the relay, and then selecting the optimal direction that minimizes the residual self-interference. Analytical residual self-interference is derived as the criterion to select the optimal direction. In addition, this paper considers the target of residual self-interference power before the analog-to-digital converter (ADC) dependent on the dynamic range in the analog-circuit domain. Analytical probability that the residual interference exceeds the target is derived to help in determining the number of measured responses of the feedback path. Computer simulations validate the analytical results, and show that in particular, the proposed scheme with ten candidates improves the residual self-interference by approximately 6dB at the probability of 0.01 that the residual self-interference exceeds target power compared with a conventional scheme with the feedback path modeled as Rayleigh fading.

We have designed a near-infrared wavelength Si/CaF2 DFB quantum cascade laser and investigated the possibility of single-mode laser oscillation by analysis of the propagation mode, gain, scattering time of Si quantum well, and threshold current density. As the waveguide and resonator, a slab-type waveguide structure with a Si/CaF2 active layer sandwiched by SiO2 on a Si (111) substrate and a grating structure in an n-Si conducting layer were assumed. From the results of optical propagation mode analysis, by assuming a λ/4-shifted bragg waveguide structure, it was found that the single vertical and horizontal TM mode propagation is possible at the designed wavelength of 1.70µm. In addition, a design of the active layer is proposed and its current injection capability is roughly estimated to be 25.1kA/cm2, which is larger than required threshold current density of 1.4kA/cm2 calculated by combining analysis results of the scattering time, population inversion, gain of quantum cascade lasers, and coupling theory of a Bragg waveguide. The results strongly indicate the possibility of single-mode laser oscillation.

Fine-grained image classification is one of the key basic tasks of computer vision. The appearance of traditional deep convolutional neural network (DCNN) combined with attention mechanism can focus on partial and local features of fine-grained images, but it still lacks the consideration of the embedding mode of different attention modules in the network, leading to the unsatisfactory result of classification model. To solve the above problems, three different attention mechanisms are introduced into the DCNN network (like ResNet, VGGNet, etc.), including SE, CBAM and ECA modules, so that DCNN could better focus on the key local features of salient regions in the image. At the same time, we adopt three different embedding modes of attention modules, including serial, residual and parallel modes, to further improve the performance of the classification model. The experimental results show that the three attention modules combined with three different embedding modes can improve the performance of DCNN network effectively. Moreover, compared with SE and ECA, CBAM has stronger feature extraction capability. Among them, the parallelly embedded CBAM can make the local information paid attention to by DCNN richer and more accurate, and bring the optimal effect for DCNN, which is 1.98% and 1.57% higher than that of original VGG16 and Resnet34 in CUB-200-2011 dataset, respectively. The visualization analysis also indicates that the attention modules can be easily embedded into DCNN networks, especially in the parallel mode, with stronger generality and universality.

The selection of mutation strategy greatly affects the performance of differential evolution algorithm (DE). For different types of optimization problems, different mutation strategies should be selected. How to choose a suitable mutation strategy for different problems is a challenging task. To deal with this challenge, this paper proposes a novel DE algorithm based on local fitness landscape, called FLIDE. In the proposed method, fitness landscape information is obtained to guide the selection of mutation operators. In this way, different problems can be solved with proper evolutionary mechanisms. Moreover, a population adjustment method is used to balance the search ability and population diversity. On one hand, the diversity of the population in the early stage is enhanced with a relative large population. One the other hand, the computational cost is reduced in the later stage with a relative small population. The evolutionary information is utilized as much as possible to guide the search direction. The proposed method is compared with five popular algorithms on 30 test functions with different characteristics. Experimental results show that the proposed FLIDE is more effective on problems with high dimensions.

Car navigation systems provide traffic jam information. In this study, we attempt to provide more detailed traffic jam information that considers the lane in which a traffic jam is in. This makes it possible for users to avoid long waits in queued traffic going toward an unintended destination. Lane-specific traffic jam detection utilizes image processing, which incurs long processing time and high cost. To reduce these, we propose a “suddenness index (SI)” to categorize candidate areas as sudden or periodic. Sudden traffic jams are prioritized as they may lead to accidents. This technology aggregates the number of connected cars for each mesh on a map and quantifies the degree of deviation from the ordinary state. In this paper, we evaluate the proposed method using actual global positioning system (GPS) data and found that the proposed index can cover 100% of sudden lane-specific traffic jams while excluding 82.2% of traffic jam candidates. We also demonstrate the effectiveness of time savings by integrating the proposed method into a demonstration framework. In addition, we improved the proposed method's ability to automatically determine the SI threshold to select the appropriate traffic jam candidates to avoid manual parameter settings.

As a further investigation of the image captioning task, some works extended the vision-text dataset for specific subtasks, such as the stylized caption generating. The corpus in such dataset is usually composed of obvious sentiment-bearing words. While, in some special cases, the captions are classified depending on image category. This will result in a latent problem: the generated sentences are in close semantic meaning but belong to different or even opposite categories. It is a worthy issue to explore an effective way to utilize the image category label to boost the caption difference. Therefore, we proposed an image captioning network with the label control mechanism (LCNET) in this paper. First, to further improve the caption difference, LCNET employs a semantic enhancement module to provide the decoder with global semantic vectors. Then, through the proposed label control LSTM, LCNET can dynamically modulate the caption generation depending on the image category labels. Finally, the decoder integrates the spatial image features with global semantic vectors to output the caption. Using all the standard evaluation metrics shows that our model outperforms the compared models. Caption analysis demonstrates our approach can improve the performance of semantic representation. Compared with other label control mechanisms, our model is capable of boosting the caption difference according to the labels and keeping a better consistent with image content as well.

The data augmentation method is known as a helpful technique to generate a dataset with a large number of images from one with a small number of images for supervised training in deep learning. However, a low validity augmentation method for image recognition was reported in a recent study on artificial intelligence (AI). This study aimed to clarify the optimal data augmentation method in deep learning model generation for the recognition of white blood cells (WBCs). Study Design: We conducted three different data augmentation methods (rotation, scaling, and distortion) on original WBC images, with each AI model for WBC recognition generated by supervised training. The subjects of the clinical assessment were 51 healthy persons. Thin-layer blood smears were prepared from peripheral blood and subjected to May-Grünwald-Giemsa staining. Results: The only significantly effective technique among the AI models for WBC recognition was data augmentation with rotation. By contrast, the effectiveness of both image distortion and image scaling was poor, and improved accuracy was limited to a specific WBC subcategory. Conclusion: Although data augmentation methods are often used for achieving high accuracy in AI generation with supervised training, we consider that it is necessary to select the optimal data augmentation method for medical AI generation based on the characteristics of medical images.

In recent years, driver's visual attention has been actively studied for driving automation technology. However, the number of models is few to perceive an insight understanding of driver's attention in various moments. All attention models process multi-level image representations by a two-stream/multi-stream network, increasing the computational cost due to an increment of model parameters. However, multi-level image representation such as optical flow plays a vital role in tasks involving videos. Therefore, to reduce the computational cost of a two-stream network and use multi-level image representation, this work proposes a single stream driver's visual attention model for a critical situation. The experiment was conducted using a publicly available critical driving dataset named BDD-A. Qualitative results confirm the effectiveness of the proposed model. Moreover, quantitative results highlight that the proposed model outperforms state-of-the-art visual attention models according to CC and SIM. Extensive ablation studies verify the presence of optical flow in the model, the position of optical flow in the spatial network, the convolution layers to process optical flow, and the computational cost compared to a two-stream model.