This paper is focused on constructing even-length binary Z-complementary pairs (EB-ZCPs) with new length. Inspired by a recent work of Adhikary et al., we give a construction of EB-ZCPs with length 8N+4 (where N=2α 10β 26γ and α, β, γ are nonnegative integers) and zero correlation zone (ZCZ) width 5N+2. The maximum aperiodic autocorrelation sums (AACS) magnitude of the proposed sequences outside the ZCZ region is 8. It turns out that the generated sequences have low PAPR.

A method for the calibration of S11 at the front surface of a material for a coaxial-feed type cut-off circular waveguide with three reference materials inserted and no short termination condition was proposed as a preliminary step for dielectric measurement in liquids. The equations for jig calibration of S11 with these reference materials were first defined, and the electrostatic capacitance for the analytical model unique to the jig was quantified by substituting the reflection constant (calculated at frequencies of 0.50, 1.5 and 3.0 GHz using the mode-matching (MM) technique) into the equivalent circuit, assuming the sample liquid in the jig. The accuracy of S11 measured using the proposed method was then verified. S11 for the front surface of the sample material was also measured with various liquids in the jig after calibration, and the dielectric constants of the liquids were estimated as an inverse problem based on comparison of S11 calculated from an analytical model using EM analysis via the MM technique with the measured S11 values described above. The effectiveness of the proposed S11 calibration method was verified by comparison with dielectric constants estimated after S11 SOM (short, open and reference material) calibration and similar, with results showing favorable agreement with each method.

In this paper, we propose new generation methods of two-dimensional (2D) optical zero-correlation zone (ZCZ) sequences with the high peak autocorrelation amplitude. The 2D optical ZCZ sequence consists of a pair of a binary sequence which takes 1 or 0 and a bi-phase sequence which takes 1 or -1, and has a zero-correlation zone in the two-dimensional correlation function. Because of these properties, the 2D optical ZCZ sequence is suitable for optical code-division multiple access (OCDMA) system using an LED array having a plurality of light-emitting elements arranged in a lattice pattern. The OCDMA system using the 2D optical ZCZ sequence can be increased the data rate and can be suppressed interference by the light of adjacent LEDs. By using the proposed generation methods, we can improve the peak autocorrelation amplitude of the sequence. This means that the BER performance of the OCDMA system using the sequence can be improved.

Locally repairable codes (LRCs) are implemented in distributed storage systems (DSSs) due to their low repair overhead. The locality of an LRC is the number of nodes in DSSs that participate in the repair of failed nodes, which characterizes the repair cost. An LRC is called optimal if its minimum distance attains the Singleton-type upper bound [1]. In this letter, optimal LRCs are considered. Using the concept of projective code in projective space PG(k, q) and shortening strategy, LRCs with d=3 are proposed. Meantime, derived from an ovoid [q2+1, 4, q2]q code (responding to a maximal (q2+1)-cap in PG(3, q)), optimal LRCs over Fq with d=4 are constructed.

In this paper, a compact microwave push-push oscillator based on a resonant tunneling diode (RTD) has been fabricated and demonstrated. A symmetrical spiral inductor structure has been used in order to reduce a chip area. The designed symmetric inductor is integrated into the InP-based RTD monolithic microwave integrated circuit (MMIC) technology. The circuit occupies a compact active area of 0.088 mm2 by employing symmetric inductor. The fabricated RTD oscillator shows an extremely low DC power consumption of 87 µW at an applied voltage of 0.47 V with good figure-of-merit (FOM) of -191 dBc/Hz at an oscillation frequency of 27 GHz. This is the first implementation as the RTD push-push oscillator with the symmetrical spiral inductor.

Stochastic geometry analysis of wireless backhaul networks with beamforming in roadside environments is provided. In particular, a new model to analyze antenna gains, interference, and coverage in roadside environments of wireless networks with Poisson point process deployment of BSs is proposed. The received interference from the BSs with wired backhaul (referred to as anchored BS or A-BS) and the coverage probability of a typical BS are analyzed under different approximations of the location of the serving A-BS and combined antenna gains. Considering the beamforming, the coverage probability based on the aggregate interference consisting of the direct interference from the A-BSs and reflected interference from the BSs with wireless backhaul is also derived.

The aim of this study is to calculate optimal walking routes in real space for users partaking in immersive virtual reality (VR) games without compromising their immersion. To this end, we propose a navigation system to automatically determine the route to be taken by a VR user to avoid collisions with surrounding obstacles. The proposed method is evaluated by simulating a real environment. It is verified to be capable of calculating and displaying walking routes to safely guide users to their destinations without compromising their VR immersion. In addition, while walking in real space while experiencing VR content, users can choose between 6-DoF (six degrees of freedom) and 3-DoF (three degrees of freedom). However, we expect users to prefer 3-DoF conditions, as they tend to walk longer while using VR content. In dynamic situations, when two pedestrians are added to a designated computer-generated real environment, it is necessary to calculate the walking route using moving body prediction and display the moving body in virtual space to preserve immersion.

This paper presents a conformal retrodirective metagrating with multi-azimuthal-angle operating ability. First, a flat metagrating composed of a periodic array of single rectangular patch elements, two-layer stacked substrates, and a ground plane is implemented to achieve one-directional retroreflection at a specific angle. The elevation angle of the retroreflection is manipulated by precisely tuning the value of the period. To control the energy coupling to the retrodirective mode, the dimensions of the length and width of the rectangular patch are investigated under the effect of changing the substrate thickness. Three values of the length, width, and thickness are then chosen to obtain a high retroreflection power efficiency. Next, to create a conformal design operating simultaneously at multiple azimuthal angles, the rectangular patch array using a flexible ultra-thin guiding layer is conformed to a dielectric cylindrical substrate backed by a perfect electric conductor ground plane. Furthermore, to further optimize the retroreflection efficiency, two circular metallic plates are added at the two ends of the cylindrical substrate to eliminate the specular reflection inside the space of the cylinder. The measured radar cross-section shows a power efficiency of the retrodirective metagrating of approximately 91% and 93% for 30° retrodirected elevation angle at the azimuthal angles of 0° and 90°, respectively, at 5.8GHz.

A method is presented for increasing wireless LAN (WLAN) capacity in high-density environments with IEEE 802.11ax systems. We propose using coordinated scheduling of trigger frames based on our mobile cooperative control concept. High-density WLAN systems are managed by a management server, which gathers wireless environmental information from user equipment through cellular access. Hierarchical clustering of basic service sets is used to form synchronized clusters to reduce interference and increase throughput of high-density WLAN systems based on mobile cooperative control. This method increases uplink capacity by up to 19.4% and by up to 11.3% in total when WLAN access points are deployed close together. This control method is potentially effective for IEEE 802.11ax WLAN systems utilized as 5G mobile network components.

The membership check of a group is an important operation to implement discrete logarithm-based cryptography in practice securely. Since this check requires costly scalar multiplication or exponentiation operation, several efficient methods have been investigated. In the case of pairing-based cryptography, this is an extended research area of discrete logarithm-based cryptography, Barreto et al. (LATINCRYPT 2015) proposed a parameter choice called subgroup-secure elliptic curves. They also claimed that, in some schemes, if an elliptic curve is subgroup-secure, costly scalar multiplication or exponentiation operation can be omitted from the membership check of bilinear groups, which results in faster schemes than the original ones. They also noticed that some schemes would not maintain security with this omission. However, they did not show the explicit condition of what schemes become insecure with the omission. In this paper, we show a concrete example of insecurity in the sense of subgroup security to help developers understand what subgroup security is and what properties are preserved. In our conclusion, we recommend that the developers use the original membership check because it is a general and straightforward method to implement schemes securely. If the developers want to use the subgroup-secure elliptic curves and to omit the costly operation in a scheme for performance reasons, it is critical to carefully analyze again that correctness and security are preserved with the omission.

Information leakage in Wyner's wiretap channel model is usually defined as the mutual information between the secret message and the eavesdropper's received signal. We define a new quantity called “conditional information leakage given the eavesdropper's received signals,” which expresses the amount of information that an eavesdropper gains from his/her received signal. A benefit of introducing this quantity is that we can develop a fast algorithm for computing the conditional information leakage, which has linear complexity in the code length n, while the complexity for computing the usual information leakage is exponential in n. Validity of such a conditional information leakage as a security criterion is confirmed by studying the cases of binary symmetric channels and binary erasure channels.

To be suitable in practice, pairings are typically carried out by two steps, which consist of the Miller loop and final exponentiation. To improve the final exponentiation step of a pairing on the BLS family of pairing-friendly elliptic curves with embedding degree 15, the authors provide a new representation of the exponent. The proposal can achieve a more reduction of the calculation cost of the final exponentiation than the previous method by Fouotsa et al.

This paper proposes an id-eCK secure identity-based authenticated key exchange (ID-AKE) scheme, where the id-eCK security implies that a scheme resists against leakage of all combinations of master, static, and ephemeral secret keys except ones trivially break the security. Most existing id-eCK secure ID-AKE schemes require two symmetric pairing operations or a greater number of asymmetric pairing, which is faster than symmetric one, operations to establish a session key. However, our scheme is realized with a single asymmetric pairing operation for each party, and this is an advantage in efficiency. The proposed scheme is based on the ID-AKE scheme by McCullagh and Barreto, which is vulnerable to an active attack. To achieve id-eCK security, we apply the HMQV construction and the NAXOS technique to the McCullagh-Barreto scheme. The id-eCK security is proved under the external Diffie-Hellman for target group assumption and the q-gap-bilinear collision attack assumption.

To enhance the user's privacy in electronic ID, anonymous credential systems have been researched. In the anonymous credential system, a trusted issuing organization first issues a certificate certifying the user's attributes to a user. Then, in addition to the possession of the certificate, the user can anonymously prove only the necessary attributes. Previously, an anonymous credential system was proposed, where CNF (Conjunctive Normal Form) formulas on attributes can be proved. The advantage is that the attribute proof in the authentication has the constant size for the number of attributes that the user owns and the size of the proved formula. Thus, various expressive logical relations on attributes can be efficiently verified. However, the previous system has a limitation: The proved CNF formulas cannot include any negation. Therefore, in this paper, we propose an anonymous credential system with constant-size attribute proofs such that the user can prove CNF formulas with negations. For the proposed system, we extend the previous accumulator for the limited CNF formulas to verify CNF formulas with negations.

In this paper, a balance operation Transimpedance Amplifier (TIA) with low-noise has been implemented for optical receivers in 130 nm SiGe BiCMOS Technology, in which the optimal tradeoff emitter current density and the location of high-frequency noise corner were analyzed for acquiring low-noise performance. The Auto-Zero Feedback Loop (AZFL) without introducing unnecessary noises at input of the TIA, the tail current sink with high symmetries and the balance operation TIA with the shared output of Operational Amplifier (OpAmp) in AZFL were designed to keep balanced operation for the TIA. Moreover, cascode and shunt-feedback were also employed to expanding bandwidth and decreasing input referred noise. Besides, the formula for calculating high-frequency noise corner in Heterojunction Bipolar Transistor (HBT) TIA with shunt-feedback was derived. The electrical measurement was performed to validate the notions described in this work, appearing 9.6 pA/√Hz of input referred noise current Power Spectral Density (PSD), balance operation (VIN1=896mV, VIN2=896mV, VOUT1=1.978V, VOUT2=1.979V), bandwidth of 32GHz, overall transimpedance gain of 68.6dBΩ, a total 117mW power consumption and chip area of 484µm × 486µm.

In this paper, we propose four optimization methods during the Register Transfer Level (RTL) conversion from synchronous RTL models into asynchronous RTL models. The modularization of data-path resources and the use of appropriate D flip-flops reduce the circuit area. Fixing the control signal of the multiplexers and inserting latches for the data-path resources reduce the dynamic power consumption. In the experiment, we evaluated the effect of the proposed optimization methods. The combination of all optimization methods could reduce the energy consumption by 21.9% on average compared to the ones without the proposed optimization methods.

This paper investigates the resource allocation problem for the downlink of non-orthogonal multiple access (NOMA) networks. A novel resource allocation method is proposed to deal with the problem of maximizing the system capacity while taking into account user fairness. Since the optimization problem is nonconvex and intractable, we adopt the idea of step-by-step optimization, decomposing it into user pairing, subchannel and power allocation subproblems. First, all users are paired according to their different channel gains. Then, the subchannel allocation is executed by the proposed subchannel selection algorithm (SSA) based on channel priority. Once the subchannel allocation is fixed, to further improve the system capacity, the subchannel power allocation is implemented by the successive convex approximation (SCA) approach where the nonconvex optimization problem is transformed into the approximated convex optimization problem in each iteration. To ensure user fairness, the upper and lower bounds of the power allocation coefficients are derived and combined by introducing the tuning coefficients. The power allocation coefficients are dynamically adjustable by adjusting the tuning coefficients, thus the diversified quality of service (QoS) requirements can be satisfied. Finally, simulation results demonstrate the superiority of the proposed method over the existing methods in terms of system performance, furthermore, a good tradeoff between the system capacity and user fairness can be achieved.

With the rapid development of multimedia, violent video can be easily accessed in games, movies, websites, and so on. Identifying violent videos and rating violence extent is of great importance to media filtering and children protection. Many previous studies only address the problems of violence scene detection and violent action recognition, yet violence rating problem is still not solved. In this paper, we present a novel video-level rating prediction method to estimate violence extent automatically. It has two main characteristics: (1) a two-stream network is fine-tuned to construct effective representations of violent videos; (2) a violence rating prediction machine is designed to learn the strength relationship among different videos. Furthermore, we present a novel violent video dataset with a total of 1,930 human-involved violent videos designed for violence rating analysis. Each video is annotated with 6 fine-grained objective attributes, which are considered to be closely related to violence extent. The ground-truth of violence rating is given by pairwise comparison method. The dataset is evaluated in both stability and convergence. Experiment results on this dataset demonstrate the effectiveness of our method compared with the state-of-art classification methods.

In this paper, we propose a design method to design asynchronous circuits with bundled-data implementation on commercial Field Programmable Gate Arrays using placement constraints. The proposed method uses two types of placement constraints to reduce the number of delay adjustments to fix timing violations and to improve the performance of the bundled-data implementation. We also propose a floorplan algorithm to reduce the control-path delays specific to the bundled-data implementation. Using the proposed method, we could design the asynchronous circuits whose performance is close to and energy consumption is small compared to the synchronous counterparts with less delay adjustment.

In this work, we introduce notions of quantum frequency arrangements consisting of quantum frequency squares, cubes, hypercubes and a notion of orthogonality between them. We also propose a notion of quantum mixed orthogonal array (QMOA). By using irredundant mixed orthogonal array proposed by Goyeneche et al. we can obtain k-uniform states of heterogeneous systems from quantum frequency arrangements and QMOAs. Furthermore, some examples are presented to illustrate our method.