Nobutaka KITO Ryota ODAKA Kazuyoshi TAKAGI
A rapid single-flux-quantum (RSFQ) truncated multiplier based on bit-level processing is proposed. In the multiplier, two operands are transformed to two serialized patterns of bits (pulses), and the multiplication is carried out by processing those bits. The result is obtained by counting bits. By calculating in bit-level, the proposed multiplier can be implemented in small area. The gate level design of the multiplier is shown. The layout of the 4-bit multiplier was also designed.
Huyen T. T. TRAN Duc V. NGUYEN Nam PHAM NGOC Truong Cong THANG
360-degree video delivery in Virtual Reality is very challenging due to the fact that 360-degree videos require much higher bandwidth than conventional videos. To overcome this problem, viewport-adaptive streaming has been introduced. In this study, we propose a new adaptation method for tiling-based viewport-adaptive streaming of 360-degree videos. For content preparation, the Cubemap projection format is used, where faces or parts of a face are encoded as tiles. Also, the problem is formulated as an optimization problem, in which each visible tile is weighted based on how that tile overlaps with the viewport. To solve the problem, an approximation algorithm is proposed in this study. An evaluation of the proposed method and reference methods is carried out under different tiling schemes and bandwidths. Experiments show that the Cubemap format with tiling provides a lot of benefits in terms of storage, viewport quality across different viewing directions and bandwidths, and tolerance to prediction errors.
In this paper, to make asynchronous circuit design easy, we propose a conversion method from synchronous Register Transfer Level (RTL) models to asynchronous RTL models with bundled-data implementation. The proposed method consists of the generation of an intermediate representation from a given synchronous RTL model and the generation of an asynchronous RTL model from the intermediate representation. This allows us to deal with different representation styles of synchronous RTL models. We use the eXtensible Markup Language (XML) as the intermediate representation. In addition to the asynchronous RTL model, the proposed method generates a simulation model when the target implementation is a Field Programmable Gate Array and a set of non-optimization constraints for the control circuit used in logic synthesis and layout synthesis. In the experiment, we demonstrate that the proposed method can convert synchronous RTL models specified manually and obtained by a high-level synthesis tool to asynchronous ones.
Daisuke UMEHARA Takeyuki SHISHIDO
Controller area network (CAN) has been widely adopted as an in-vehicle communications standard. CAN with flexible data-rate (CAN FD) is defined in the ISO standards to achieve higher data rates than the legacy CAN. A number of CAN nodes can be connected by a single transmission medium, i.e. CAN enables us to constitute cost-effective bus-topology networks. CAN puts carrier sense multiple access with collision resolution (CSMA/CR) into practice by using bit-wise arbitration based on wired logical AND in the physical layer. The most prioritized message is delivered without interruption if two or more CAN nodes transmit messages at the same time due to the bit-wise arbitration. However, the scalability of CAN networks suffers from ringing caused by the signaling mechanism establishing the wired logical AND. We need to reduce networking material in a car in order to reduce the car weight, save the fuel and the cost, and develop a sustainable society by establishing more scalable CAN networks. In this paper, we show a reduced wiring technology for CAN to enhance the network scalability and the cost efficiency.
Tomoya HATANO Jun-ichi KANI Yoichi MAEDA
This paper reviews access system standardization activities and related technologies from the viewpoints of optical-based PON access, mobile access systems including LPWAN, and access network virtualization. Future study issues for the next access systems are also presented.
Tao XIE Jiang ZHU Qian CHENG Yifu GUAN
Wireless communication security has been increasingly important nowadays. Directional modulation (DM) is seen as a promising wireless physical layer security technology. Traditional DM is a transmit-side technology that projects digitally modulated information signals in the desired directions (or at the desired locations) while simultaneously distorting the constellation formats of the same signals in other directions (or at all other locations). However, these directly exposed digitally modulated information signals are easily intercepted by eavesdroppers along the desired directions (or around the desired locations). A new DM scheme for secure point-to-multipoint communication based on the spread spectrum assisted orthogonal frequency diverse array (short for SS-OFDA-M-DM) is proposed in this paper. It can achieve point-to-multipoint secure communication for multiple cooperative receivers at different locations. In the proposed SS-OFDA-M-DM scheme, only cooperative users that use specific DM receivers with right spread spectrum parameters can retrieve right symbols. Eavesdroppers without knowledge of spread spectrum parameters cannot intercept useful signals directly at the desired locations. Moreover, they cannot receive normal symbols at other locations either even if the right spread spectrum parameters are known. Numerical simulation results verify the validity of our proposed scheme.
Ryosuke OZAKI Tsuneki YAMASAKI
In this paper, we propose a new technique for the transient scattering problem of periodically arrayed dispersion media for the TE case by using a combination of the Fourier series expansion method (FSEM) and the fast inversion Laplace transform (FILT) method, and analyze the pulse response for various widths of the dispersion media. As a result, we clarified the influence of the dispersion media with an air region on the resulting waveform.
Wenting WEI Kun WANG Gu BAN Keming FENG Xuan WANG Huaxi GU
Network virtualization is viewed as a promising approach to facilitate the sharing of physical infrastructure among different kinds of users and applications. In this letter, we propose a topological consistency-based virtual network embedding (TC-VNE) over elastic optical networks (EONs). Based on the concept of topological consistency, we propose a new node ranking approach, named Sum-N-Rank, which contributes to the reduction of optical path length between preferred substrate nodes. In the simulation results, we found our work contributes to improve spectral efficiency and balance link load simultaneously without deteriorating blocking probability.
Sukhumarn ARCHASANTISUK Takahiro AOYAGI
Communication reliability and energy efficiency are important issues that have to be carefully considered in WBAN design. Due to the large path loss variation of the WBAN channel, transmission power control, which adaptively adjusts the radio transmit power to suit the channel condition, is considered in this paper. Human motion is one of the dominant factors that affect the channel characteristics in WBAN. Therefore, this paper introduces motion-aware temporal correlation model-based transmission power control that combines human motion classification and transmission power control to provide an effective approach to realizing reliable and energy-efficient WBAN communication. The human motion classification adopted in this study uses only the received signal strength to identify the human motion; no additional tool is required. The knowledge of human motion is then used to accurately estimate the channel condition and suitably select the transmit power. A performance evaluation shows that the proposed method works well both in the low and high WBAN network loads. Compared to using the fixed Tx power of -5dBm, the proposed method had similar packet loss rate but 20-28 and 27-33 percent lower average energy consumption for the low network traffic and high network traffic cases, respectively.
Arnab MUKHOPADHYAY Tapas Kumar MAITI Sandip BHATTACHARYA Takahiro IIZUKA Hideyuki KIKUCHIHARA Mitiko MIURA-MATTAUSCH Hafizur RAHAMAN Sadayuki YOSHITOMI Dondee NAVARRO Hans Jürgen MATTAUSCH
This report focuses on an optimization scheme of advanced MOSFETs for designing CMOS circuits with high power efficiency. For this purpose the physics-based compact model HiSIM2 is applied so that the relationship between device and circuit characteristics can be investigated properly. It is demonstrated that the short-channel effect, which is usually measured by the threshold-voltage shift relative to long-channel MOSFETs, provides a consistent measure for device-performance degradation with reduced channel length. However, performance degradations of CMOS circuits such as the power loss cannot be predicted by the threshold-voltage shift alone. Here, the subthreshold swing is identified as an additional important measure for power-efficient CMOS circuit design. The increase of the subthreshold swing is verified to become obvious when the threshold-voltage shift is larger than 0.15V.
Chikara FUJIMURA Kosuke SANADA Kazuo MORI
Wireless Full-Duplex (FD) communication can double the point-to-point throughput. To obtain the full benefits of the FD technique in multi-hop networks, its potential throughput performance in multi-hop networks should be clarified qualitatively and quantitatively. Developing an analytical model for FD multi-hop networks is effective and useful for not only clarifying such network dynamics but also developing the optimal protocol design. However, generalized analytical expression for the end-to-end throughput of FD multi-hop networks has not been proposed. This paper proposes analytical expressions for the end-to-end throughput of string-topology wireless FD multi-hop networks. Our approach is to integrate with the analytical model of the airtime expression, which is an effective analytical approach of the throughput analysis for Half-Duplex (HD) multi-hop networks, and the Markov-chain model considering the FD MAC operation. The proposed model clarify the detailed effect of the FD MAC operation on the throughput performance in multi-hop networks. In particular, it can obtain the end-to-end throughput of FD multi-hop networks for arbitrary number of hops, arbitrary payload size and arbitrary value of the minimum contention window. The analytical expressions verified by comparisons with the simulation results. From the comparisons with the results in HD multi-hop networks, we confirm the effectiveness of the FD communication in multi-hop networks.
Shinpei YAMASHITA Michihiko SUHARA Kenichi KAWAGUCHI Tsuyoshi TAKAHASHI Masaru SATO Naoya OKAMOTO Kiyoto ASAKAWA
We fabricate and characterize a GaAsSb/InGaAs backward diode (BWD) toward a realization of high sensitivity zero bias microwave rectification for RF wave energy harvest. Lattice-matched p-GaAsSb/n-InGaAs BWDs were fabricated and their current-voltage (I-V) characteristics and S-parameters up to 67 GHz were measured with respect to several sorts of mesa diameters in μm order. Our theoretical model and analysis are well fitted to the measured I-Vs on the basis of WKB approximation of the transmittance. It is confirmed that the interband tunneling due to the heterojunction is a dominant transport mechanism to exhibit the nonlinear I-V around zero bias regime unlike recombination or diffusion current components on p-n junction contribute in large current regime. An equivalent circuit model of the BWD is clarified by confirming theoretical fitting for frequency dependent admittance up to 67 GHz. From the circuit model, eliminating the parasitic inductance component, the frequency dependence of voltage sensitivity of the BWD rectifier is derived with respect to several size of mesa diameter. It quantitatively suggests an effectiveness of mesa size reduction to enhance the intrinsic matched voltage sensitivity with increasing junction resistance and keeping the magnitude of I-V curvature coefficient.
Satoshi SEIMIYA Takumi KOBAYASHI Ryuji KOHNO
In this study, under the assumption that a robot (1) has a remotely controllable yawing camera and (2) moves in a uniform linear motion, we propose and investigate how to improve the target recognition rate with the camera, by using wireless feedback loop control. We derive the allowable data rate theoretically, and, from the viewpoint of error and delay control, we propose and evaluate QoS-Hybrid ARQ schemes under data rate constraints. Specifically, the theoretical analyses derive the maximum data rate for sensing and control based on the channel capacity is derived with the Shannon-Hartley theorem and the path-loss channel model inside the human body, i.e. CM2 in IEEE 802.15.6 standard. Then, the adaptive error and delay control schemes, i.e. QoS-HARQ, are proposed considering the two constraints: the maximum data rate and the velocity of the camera's movement. For the performance evaluations, with the 3D robot simulator GAZEBO, we evaluated our proposed schemes in the two scenarios: the static environment and the dynamic environment. The results yield insights into how to improve the recognition rate considerably in each situation.
Akihito TAYA Takayuki NISHIO Masahiro MORIKURA Koji YAMAMOTO
Sharing perceptual data (e.g., camera and LiDAR data) with other vehicles enhances the traffic safety of autonomous vehicles because it helps vehicles locate other vehicles and pedestrians in their blind spots. Such safety applications require high throughput and short delay, which cannot be achieved by conventional microwave vehicular communication systems. Therefore, millimeter-wave (mmWave) communications are considered to be a key technology for sharing perceptual data because of their wide bandwidth. One of the challenges of data sharing in mmWave communications is broadcasting because narrow-beam directional antennas are used to obtain high gain. Because many vehicles should share their perceptual data to others within a short time frame in order to enlarge the areas that can be perceived based on shared perceptual data, an efficient scheduling for concurrent transmission that improves spatial reuse is required for perceptual data sharing. This paper proposes a data sharing algorithm that employs a graph-based concurrent transmission scheduling. The proposed algorithm realizes concurrent transmission to improve spatial reuse by designing a rule that is utilized to determine if the two pairs of transmitters and receivers interfere with each other by considering the radio propagation characteristics of narrow-beam antennas. A prioritization method that considers the geographical information in perceptual data is also designed to enlarge perceivable areas in situations where data sharing time is limited and not all data can be shared. Simulation results demonstrate that the proposed algorithm doubles the area of the cooperatively perceivable region compared with a conventional algorithm that does not consider mmWave communications because the proposed algorithm achieves high-throughput transmission by improving spatial reuse. The prioritization also enlarges the perceivable region by a maximum of 20%.
This letter studies secure communication in a wireless powered communication network with a full-duplex destination node, who applies either power splitting (PS) or time switching (TS) to coordinate energy harvesting and information decoding of received signals and transmits jamming signals to the eavesdropper using the harvested energy. The secrecy rate is maximized by optimizing PS or TS ratio and power allocation. We propose iterative algorithms with power allocation optimized by the successive convex approximation method. Simulation results demonstrate that the proposed algorithms are superior to other benchmark algorithms.
Alessandro LEONI Pietro NANNIPIERI Luca FANUCCI
The technology advancement of satellite instruments requires increasingly fast interconnection technologies, for which no standardised solution exists. SpaceFibre is the forthcoming protocol promising to overcome the limitation of its predecessor SpaceWire, offering data-rate higher than 1Gbps. However, while several implementations of the SpaceFibre IP already exist, its Network Layer is still at experimental level. This article describes the architecture of an implemented SpaceFibre Routing Switch and provides synthesis results for common FPGAs.
In sparsity-based optimization problems for two dimensional (2-D) direction-of-arrival (DOA) estimation using L-shaped nested arrays, one of the major issues is computational complexity. A 2-D DOA estimation algorithm is proposed based on reconsitution sparse Bayesian learning (RSBL) and cross covariance matrix decomposition. A single measurement vector (SMV) model is obtained by the difference coarray corresponding to one-dimensional nested array. Through spatial smoothing, the signal measurement vector is transformed into a multiple measurement vector (MMV) matrix. The signal matrix is separated by singular values decomposition (SVD) of the matrix. Using this method, the dimensionality of the sensing matrix and data size can be reduced. The sparse Bayesian learning algorithm is used to estimate one-dimensional angles. By using the one-dimensional angle estimations, the steering vector matrix is reconstructed. The cross covariance matrix of two dimensions is decomposed and transformed. Then the closed expression of the steering vector matrix of another dimension is derived, and the angles are estimated. Automatic pairing can be achieved in two dimensions. Through the proposed algorithm, the 2-D search problem is transformed into a one-dimensional search problem and a matrix transformation problem. Simulations show that the proposed algorithm has better angle estimation accuracy than the traditional two-dimensional direction finding algorithm at low signal-to-noise ratio and few samples.
Feng KE Xiaoyu HUANG Weiliang ZENG Yuqin LIU
Wireless powered communication networks (WPCNs) utilize the wireless energy transfer (WET) technique to facilitate the wireless information transmission (WIT) of nodes. We propose a two-step iterative algorithm to maximize the sum throughput of the users in a MIMO WPCN with discrete signal inputs. Firstly, the optimal solution of a convex power allocation problem can be found given a fixed time allocation; Secondly, a semi closed form solution for the optimal time allocation is obtained when fixing the power allocation matrix. By optimizing the power allocation and time allocation alternately, the two-step algorithm converges to a local optimal point. Simulation results show that the proposed algorithm outperforms the conventional schemes, which consider only Gaussian inputs.
Mohamed M. MANSOUR Haruichi KANAYA
This paper looks into the underlying RF energy harvesting issues at low input ambient power levels below 0 dBm where efficiency degradation is severe. The proposed design aims to improve the rectenna sensitivity, efficiency, and output DC power. In the same manner, we are using a straightforward and compact size rectenna design. The receiving antenna is a coplanar waveguide (CPW) slot monopole antenna with harmonic suppression property and a peak measured gain of 3 dBi. Also, an improved antenna radiation characteristics, e.g radiation pattern and gain covering the desired operating band (ISM 2.45 GHz), is observed. The rectifier is a voltage doubler circuit based on microstrip (MS) structure. Two architectures of rectenna were carefully designed, fabricated and tested. The first layout; antenna, and rectifier were fabricated separately and then connected using a connector. The peak efficiency (40% at -5 dBm) achieved is lower than expected. To improve the efficiency, a high compactness and simple integration between antenna and rectifier are achieved by using a smooth CPW-MS transition. This design shows improved conversion efficiency measurement results which typically agree with the simulation results. The measured peak conversion efficiency is 72% at RF power level of -7 dBm and a load resistance of 2 kΩ.
Wei JHANG Shiaw-Wu CHEN Ann-Chen CHANG
This letter presents an efficient hybrid direction of arrival (DOA) estimation scheme for massive uniform linear array. In this scheme, the DOA estimator based on a discrete Fourier transform (DFT) is first applied to acquire coarse initial DOA estimates for single data snapshot. And then, the fine DOA is accurately estimated through using the iterative search estimator within a very small region. It iteratively searches for correct DOA vector by minimizing the objective function using a Taylor series approximation of the DOA vector with the one initially estimated. Since the proposed scheme does not need to perform eigen-decomposition and spectrum search while maintaining better DOA estimates, it also has low complexity and real-time capability. Simulation results are presented to demonstrate the efficiency of the proposed scheme.