This paper presents a new parallel architecture of syndrome generator for a high-speed BCH (Bose-Chaudhuri-Hocquenghem) decoder. In particular, the proposed parallel syndrome generators are based on LFSR (linear feedback shift register) architecture to achieve high throughput without significant area overhead. From the experimental results, the proposed approach achieves 4.60 Gbps using 0.25-µm standard CMOS technology. This result is much faster than the conventional byte-wise GFM-based counterpart. The high throughputs are due to the well-tuned hardware implementation using unfolding transformation.

This work presents a novel counter-based randomization method for use in a flying-adder frequency synthesizer with a cost-effective structure that can replace the fractional accumulator. The proposed technique involves a counter, a comparator and a modified linear feedback shift register. The power consumption and speed bottleneck of the conventional flying-adder are significantly reduced. The modified linear shift feedback register is used as a pseudo random data generator, suppressing the spurious tones arise from the periodic carry sequences that is generated by the fractional accumulator. Furthermore, the proposed counter-based randomization method greatly reduces the large memory size that is required by the conventional approach to carry randomization. A test chip for the proposed counter-based randomization method is fabricated in the TSMC 0.18,$mu $m 1P6M CMOS process, with the core area of 0.093,mm$^{mathrm{2}}$. The output frequency had a range of 43.4,MHz, extasciitilde 225.8,MHz at 1.8,V with peak-to-peak jitter (Pk-Pk) jitter 139.2,ps at 225.8,MHz. Power consumption is 2.8,mW @ 225.8,MHz with 1.8 supply voltage.

For k ≥ 3, a convex geometric graph is called k-locally outerplanar if no path of length k intersects itself. In [D. Boutin, Convex Geometric Graphs with No Short Self-intersecting Path, Congressus Numerantium 160 (2003) 205-214], Boutin stated the results of the degeneracy for 3-locally outerplanar graphs. Later, in [D. Boutin, Structure and Properties of Locally Outerplanar Graphs, Journal of Combinatorial Mathematics and Combinatorial Computing 60 (2007) 169-180], a structural property on k-locally outerplanar graphs was proposed. These results are based on the existence of “minimal corner pairs”. In this paper, we show that a “minimal corner pair” may not exist and give a counterexample to disprove the structural property. Furthermore, we generalize the result on the degeneracy with respect to k-locally outerplanar graphs.

Optical coherence tomography using a tunable single-mode laser is investigated to clarify the effects of long coherence length and step-wise frequency changes.

Autonomous ad hoc networks are networks with nodes belonging to different authorities, and cooperative behavior of nodes is not guaranteed in such networks. In this paper, defense mechanisms are introduced to protect nodes against injecting traffic attacks in an autonomous ad hoc network, and to stimulate nodes to forward packets for each other. We have a cross-layer approach in the design of our mechanisms, and nodes use information from medium access control (MAC) layer for selecting a good route. In addition, nodes attempt to drop packets of those nodes that violate MAC layer backoff mechanism. Analytical and simulation results demonstrate the effectiveness of our proposed mechanisms in the presence of injecting traffic attacks and MAC layer misbehaviors in an ad hoc network that consists of selfish nodes.

This paper presents a novel signal analysis algorithm, named High-order Bi-orthogonal Fourier Transform (HBFT), which can be seen as an expansion of Fourier transform. The HBFT formula and discrete HBFT formula are derived, some of their main characteristics are briefly discusses. This paper also uses HBFT to analyze the multi-LFM signals, obtain the modulate rate parameters, analyze the high dynamic signals, and obtain the accelerated and varying accelerated motion parameters. The result proves that HBFT is suitable for analysis of the non-stability signals with high-order components.

An optimal design method of linear processors intended for a multi-input multi-output (MIMO) full-duplex (FD) amplify-and-forward (AF) relay network is presented under the condition of spatial-domain self-interference nulling. This method is designed to suit the availability of channel state information (CSI). If full CSI of source station (SS)-relay station (RS), RS-RS (self-interference channel), and RS-destination station (DS) links are available, the instantaneous end-to-end capacity is maximized. Otherwise, if CSI of the RS-DS link is either partially available (only covariance is known), or not available, while CSI of the other links is known, then the ergodic end-to-end capacity is maximized. Performance of the proposed FD-AF relay system is demonstrated through computer simulations, especially under various correlation conditions of the RS-DS link.

This article introduces a self-organizing model which builds the topology of a DHT mapping system for ICN. Due to its self-organizing operation and low average degree of maintenance, the management overhead of the system is reduced dramatically, which yields inherent scalability. The proposed model can improve latency by around 10% compared to an existing approach which has a near optimal average distance when the number of nodes and degree are given. In particular, its operation is simple which eases maintenance concerns. Moreover, we analyze the model theoretically to provide a deeper understanding of the proposal.

We propose a cyclic sleep control technique for backup resources in reconfigurable optical add/drop multiplexer (ROADM) systems to simultaneously achieve power savings and high-speed recovery from failures. Processes to check the reliability of backup resources, backup transponders and paths, are also provided in the control technique. The proposed technique uses sleep mode where backup transponders are powered down to minimize power for power savings. At least one of the backup transponders is always activated after self-checking using the loopback fiber connection in the ROADM and it becomes a shared backup for working transponders to enable high-speed recovery from failures. This activated backup transponder is powered down again after the next transponder is activated. These state transitions are cyclically applied to each backup transponder. This “cyclic” aspect of operation enables network operators to continuously monitor the reliability for all backup resources with the sleep mode. The activated backup transponders at both ends of the path are used in checking the reliability of backup paths. Therefore, all backup resources, both transponders and paths, can be regularly checked with the sleep mode to ensure data are stably forwarded. We estimated the power consumption with this technique under various conditions and found a trade-off between power reduction and the recovery capabilities from failures. We achieved more than 34% power saving of backup transponders maintaining the failure recovery time within 50ms in experiments. Furthermore, we confirmed the reliability of backup paths in experiments using backup transponders with the cyclic sleep control technique. These results indicated that the proposed control technique is promising in dramatically and reliably reducing the power consumption of backup resources.

The combined linear frequency modulation continuous wave (LFMCW) and inverse synthetic aperture radar (ISAR) can be used for imaging long-distance targets because of its long-distance and high resolution imaging abilities. In this paper, we find and study the dechirp distortion phenomenon (DDP) for imaging long-distance targets by a dechirp-on-receive LFMCW radar. If the targets are very far from the radar, the maximum delay-time is not much smaller than a single sweep duration, and the dechirp distortion is triggered since the distance of the target is unknown in a LFMCW-ISAR system. DDP cannot be ignored in long-distance imaging because double images of a target appear in the frequency domain, which reduces resolution and degrades image quality. A novel LFMCW-ISAR signal model is established to analyze DDP and its negative effects on long-distance target imaging. Using the proportionately distributed energy of double images, the authors propose a method to correct dechirp distortion. In addition, the applicable scope of the proposed method is also discussed. Simulation results validate the theoretical analysis and the effectiveness of the proposed method.

An efficient subcarrier allocation scheme of a supporting cell is proposed to recover the communication of faulty cell users in an OFDM-based wireless system. With the proposed subcarrier allocation scheme, the number of subcarriers allocated to faulty cell users is maximized while the average throughput of supporting cell users is maintained at a desired level. To find the maximum number of subcarriers allocated to faulty cell users, the average throughput of the subcarrier with the k-th smallest channel gain in a subcarrier group is derived by an inductive method. It is shown by simulation that the proposed subcarrier allocation scheme can provide more subcarriers to faulty cell users than the random selection subcarrier allocation scheme.

This letter describe target classification from the synthesized active sonar returns from targets. A fractional Fourier transform is applied to the sonar returns to extract shape variation in the fractional Fourier domain depending on the highlight points and aspects of the target. With the proposed features, four different targets are classified using two neural network classifiers.

The unique characteristic of Ternary ripple-carry addition enables us to optimize Ternary Full Adder for this specific application. Carbon nanotube field effect transistors are used in this paper to design new Ternary Half and Full Adders, which are essential components of Ternary ripple-carry adder. The novel designs take the sum of input variables as a single input signal, and generate outputs in a way which is far more efficient than the previously presented similar structures. The new ripple-carry adder operates rapidly, with high performance, and low-transistor-count.

This paper proposes a novel multimodal interactive surgical simulator that incorporates haptic, olfactory, as well as traditional vision feedback. A scent diffuser was developed to produce odors when errors occur. Haptic device was used to provide the sense of touch to the user. The preliminary results show that adding smell as an aid to the simulation enhanced the memory retention that lead to better performance.

We investigate resolution improvement in optical quantization with keeping high sampling rate performance in optical sampling. Since our optical quantization approach uses power-to-wavelength conversion based on soliton self-frequency shift, a spectral compression can improve resolution in exchange for sampling rate degradation. In this work, we propose a different approach for resolution improvement by parallel use of dispersion devices so as to avoid sampling rate degradation. Additional use of different dispersion devices can assist the wavelength separation ability of an original dispersion device. We demonstrate the principle of resolution improvement in 3 bit optical quantization. Simulation results based on experimental evaluation of 3 bit optical quantization system shows 4 bit optical quantization is achieved by parallel use of dispersion devices in 3 bit optical quantization system. The maximum differential non-linearity (DNL) and integral non-linearity (INL) are 0.49 least significant bit (LSB) and 0.50 LSB, respectively. The effective number of bits (ENOB) estimated to 3.62 bit.

In this paper, we present a differential dual-modulus prescaler based on an injection-locked frequency divider (ILFD) for satellite low-noise block (LNB) down-converters. We fabricated three-stage differential latches using an ILFD and a cascaded differential divider in a 130-nm CMOS process. The prototype chip core area occupies 40µm × 20µm. The proposed prescaler achieved the locking range of 2.1-10GHz with both divide-by-10 and divide-by-11 operations at a supply voltage of 1.4V. Normalized energy consumptions are 0.4pJ (=mW/GHz) at a 1.4-V supply voltage and 0.24pJ at a 1.2-V supply voltage. To evaluate the tolerance of phase-difference deviation of the input differential pair from the perfect differential phase-difference, 180 degrees, we measured the operational frequencies for various phase-difference inputs. The proposed prescaler achieved the operational frequency range of 2.1-10GHz with an input phase-difference deviation of less than 90 degrees. However, the range of operational frequency decreases as the phase-difference deviation increases beyond 90 degrees and reaches 3.9-7.9GHz for the phase-difference deviation of 180 degrees (i.e. no phase difference). In addition, to confirm the fully locking operation, we measured the spurious noise and the phase noise degradation while reducing the supply voltage. The sensitivity analysis of the prescaler for various supply voltages can explain the above degradation of spectral purity. Spurious noise arises and the phase noise degrades with decreasing supply voltage due to the quasi- and non-locking operations. We verified the fully-locking operation for the LNB down-converter at a 1.4-V supply voltage.

We have succeeded in highly selective growth and positioning of Si- and SiGe-quantum-dots (QDs) on SiO2 patterns by controlling the reactive area, whose surface is terminated with OH bonds for Si nucleation in low-pressure chemical vapor deposition (LPCVD). The selective growth of QDs on thermally grown SiO2 line-patterns was demonstrated in LPCVD of SiH4 and GeH4 just after Si nucleation by controlling the early stages of Si2H6-LPCVD, which indicates effectively enhanced initial nucleation on OH-terminated SiO2 surface and suppression of the nucleation and growth of dots on as-grown SiO2 surface during Si2H6-LPCVD prior to SiH4-LPCVD.

Mobility load balancing (MLB) is a key technology for self-organization networks (SONs). In this paper, we explore the mobility load balancing problem and propose a unified cell specific offset adjusting algorithm (UCSOA) which more accurately adjusts the largely uneven load between neighboring cells and is easily implemented in practice with low computing complexity and signal overhead. Moreover, we evaluate the UCSOA algorithm in two different traffic conditions and prove that the UCSOA algorithm can get the lower call blocking rates and handover failure rates. Furthermore, the interdependency of the proposed UCSOA algorithm's performance and that of the inter-cell interference coordination (ICIC) algorithm is explored. A self-organization soft frequency reuse scheme is proposed. It demonstrates UCSOA algorithm and ICIC algorithm can obtain a positive effect for each other and improve the network performance in LTE system.

This letter deals with angular position classification using the synthesized active sonar returns from targets. For the synthesis of active sonar returns, we synthesized active sonar returns based on ray tracing algorithm for 3D highlight models. Then, a fractional Fourier transform (FrFT) was applied to the sonar returns to extract the angular position information depending on the target aspect by utilizing separation capability of the time-delayed combination of linear frequency modulated (LFM) signals in the FrFT domain. With the FrFT-based features, three different target angular positions were classified using neural networks.

Voltage multiplier (VM) circuits for RF (2.45GHz)-to-DC conversion are developed for battery-less sensor nodes. Converted DC power is charged on a storage capacitor before driving a wireless sensor module. A charging time of the storage capacitor of the proposed VM circuits is reduced 1/10 of the conventional VM circuits, because they have constant current characteristics owing to self-control of body bias in diode-connected SOI MOSFETs. The wireless sensor system composed of the fabricated VM chip and a commercially available sensor module is operated using an RF signal of a wireless LAN modem (2.45GHz) as a power source.