In a wireless ad hoc network (MANET), nodes can form a centerless, self-organizing, multi-hop dynamic network without any centralized control function, while hidden and exposed terminals seriously affect the network performance. Meanwhile, the wireless network node is evolving from single communication function to jointly providing a self precise positioning function, especially in indoor environments where GPS cannot work well. However, the existing medium access control (MAC) protocols only deal with collision control for data transmission without positioning function. In this paper, we propose a MAC protocol based on 802.11 standard to enable a node with self-positioning function, which is further used to solve hidden and exposed terminal problems. The location of a network node is obtained through exchanging of MAC frames jointly using a time of arrival (TOA) algorithm. Then, nodes use the location information to calculate the interference range, and judge whether they can transmit concurrently. Simulation shows that the positioning function of the proposed MAC protocol works well, and the corresponding MAC protocol can achieve higher throughput, lower average end-to-end delay and lower packet loss rate than that without self-localization function.

Visual Question Answering (VQA) is multi-task research that requires simultaneous processing of vision and text. Recent research on the VQA models employ a co-attention mechanism to build a model between the context and the image. However, the features of questions and the modeling of the image region force irrelevant information to be calculated in the model, thus affecting the performance. This paper proposes a novel dual self-guided attention with sparse question networks (DSSQN) to address this issue. The aim is to avoid having irrelevant information calculated into the model when modeling the internal dependencies on both the question and image. Simultaneously, it overcomes the coarse interaction between sparse question features and image features. First, the sparse question self-attention (SQSA) unit in the encoder calculates the feature with the highest weight. From the self-attention learning of question words, the question features of larger weights are reserved. Secondly, sparse question features are utilized to guide the focus on image features to obtain fine-grained image features, and to also prevent irrelevant information from being calculated into the model. A dual self-guided attention (DSGA) unit is designed to improve modal interaction between questions and images. Third, the sparse question self-attention of the parameter δ is optimized to select these question-related object regions. Our experiments with VQA 2.0 benchmark datasets demonstrate that DSSQN outperforms the state-of-the-art methods. For example, the accuracy of our proposed model on the test-dev and test-std is 71.03% and 71.37%, respectively. In addition, we show through visualization results that our model can pay more attention to important features than other advanced models. At the same time, we also hope that it can promote the development of VQA in the field of artificial intelligence (AI).

It is known that quasi-cyclic (QC) codes over the finite field Fq correspond to certain Fq[x]-modules. A QC code C is specified by a generator polynomial matrix G whose rows generate C as an Fq[x]-module. The reversed code of C, denoted by R, is the code obtained by reversing all codewords of C while the dual code of C is denoted by C⊥. We call C reversible, self-orthogonal, and self-dual if R = C, C⊥ ⊇ C, and C⊥ = C, respectively. In this study, for a given C, we find an explicit formula for a generator polynomial matrix of R. A necessary and sufficient condition for C to be reversible is derived from this formula. In addition, we reveal the relations among C, R, and C⊥. Specifically, we give conditions on G corresponding to C⊥ ⊇ R, C⊥ ⊆ R, and C = R = C⊥. As an application, we employ these theoretical results to the construction of QC codes with best parameters. Computer search is used to show that there exist various binary reversible self-orthogonal QC codes that achieve the upper bounds on the minimum distance of linear codes.

We propose an attention mechanism in deep learning networks for gender recognition using the gaze distribution of human observers when they judge the gender of people in pedestrian images. Prevalent attention mechanisms spatially compute the correlation among values of all cells in an input feature map to calculate attention weights. If a large bias in the background of pedestrian images (e.g., test samples and training samples containing different backgrounds) is present, the attention weights learned using the prevalent attention mechanisms are affected by the bias, which in turn reduces the accuracy of gender recognition. To avoid this problem, we incorporate an attention mechanism called gaze-guided self-attention (GSA) that is inspired by human visual attention. Our method assigns spatially suitable attention weights to each input feature map using the gaze distribution of human observers. In particular, GSA yields promising results even when using training samples with the background bias. The results of experiments on publicly available datasets confirm that our GSA, using the gaze distribution, is more accurate in gender recognition than currently available attention-based methods in the case of background bias between training and test samples.

We propose a self-stabilizing leader election protocol on directed rings in the model of population protocols. Given an upper bound N on the population size n, the proposed protocol elects a unique leader within O(nN) expected steps starting from any configuration and uses O(N) states. This convergence time is optimal if a given upper bound N is asymptotically tight, i.e., N=O(n).

The multi-category support vector machine (MC-SVM) is one of the most popular machine learning algorithms. There are numerous MC-SVM variants, although different optimization algorithms were developed for diverse learning machines. In this study, we developed a new optimization algorithm that can be applied to several MC-SVM variants. The algorithm is based on the Frank-Wolfe framework that requires two subproblems, direction-finding and line search, in each iteration. The contribution of this study is the discovery that both subproblems have a closed form solution if the Frank-Wolfe framework is applied to the dual problem. Additionally, the closed form solutions on both the direction-finding and line search exist even for the Moreau envelopes of the loss functions. We used several large datasets to demonstrate that the proposed optimization algorithm rapidly converges and thereby improves the pattern recognition performance.

In this paper, we present an efficient and robust method for estimating Homography matrix for soccer field registration between a captured camera image and a soccer field model. The presented method first detects reliable field lines from the camera image through clustering. Constructing a novel directional feature of the intersection points of the lines in both the camera image and the model, the presented method then finds matching pairs of these points between the image and the model. Finally, Homography matrix estimations and validations are performed using the obtained matching pairs, which can reduce the required number of Homography matrix calculations. Our presented method uses possible intersection points outside image for the point matching. This effectively improves robustness and accuracy of Homography estimation as demonstrated in experimental results.

Heterogeneous networks (HetNets) are emerging as an inevitable method to tackle the capacity crunch of the cellular networks. Due to the complicated network environment and a large number of configured parameters, coverage and capacity optimization (CCO) is a challenging issue in heterogeneous cellular networks. By combining the self-optimizing algorithm for radio frequency (RF) parameters with the power control mechanism of small cells, the CCO problem of self-organizing network is addressed in this paper. First, the optimization of RF parameters is solved based on reinforcement learning (RL), where the base station is modeled as an agent that can learn effective strategies to control the tunable parameters by interacting with the surrounding environment. Second, the small cell can autonomously change the state of wireless transmission by comparing its distance from the user equipment with the virtual cell size. Simulation results show that the proposed algorithm can achieve better performance on user throughput compared to different conventional methods.

Relation extraction is one of the key basic tasks in natural language processing in which distant supervision is widely used for obtaining large-scale labeled data without expensive labor cost. However, the automatically generated data contains massive noise because of the wrong labeling problem in distant supervision. To address this problem, the existing research work mainly focuses on removing sentence-level noise with various sentence selection strategies, which however could be incompetent for disposing word-level noise. In this paper, we propose a novel neural framework considering both intra-sentence and inter-sentence relevance to deal with word-level and sentence-level noise from distant supervision, which is denoted as Sentence-Related Gated Piecewise Convolutional Neural Networks (SR-GPCNN). Specifically, 1) a gate mechanism with multi-head self-attention is adopted to reduce word-level noise inside sentences; 2) a soft-label strategy is utilized to alleviate wrong-labeling propagation problem; and 3) a sentence-related selection model is designed to filter sentence-level noise further. The extensive experimental results on NYT dataset demonstrate that our approach filters word-level and sentence-level noise effectively, thus significantly outperforms all the baseline models in terms of both AUC and top-n precision metrics.

We design a silicon gate-all-around junctionless field-effect transistor (JLFET) using a step thickness gate oxide (GOX) by the Sentaurus technology computer-aided design simulation. We demonstrate the different gate-induced drain leakage (GIDL) mechanism of the traditional inversion-mode field-effect transistor (IMFET) and JLFET. The off leakage in the IMFET is dominated by the parasitic bipolar junction transistor effect, whereas in the JLFET it is a result of the volume conduction due to the screening effect of the accumulated holes. With the introduction of a 4 nm thick-second GOX and remaining first GOX thickness of 1 nm, the tunneling generation is reduced at the channel-drain interface, leading to a decrease in the off current of the JLFET. A thicker second GOX has the total gate capacitance of JLFETs, where a 0.3 ps improved intrinsic delay is achieved. This alleviates the capacitive load of the transistor in the circuit applications. Finally, the short-channel effects of the step thickness GOX JLFET were investigated with a total gate length from 40 nm to 6 nm. The results indicate that the step thickness GOX JLFETs perform better on the on/off ratio and drain-induced barrier lowering but exhibit a small degradation on the subthreshold swing and threshold roll-off.

An olfactory display is a device to present smells. Temporal characteristics of three types of olfactory displays such as one based upon high-speed switching of solenoid valves, desktop-type one based on SAW atomizer and wearable-type one based on SAW atomizer were evaluated using three odorants with different volatilities. The sensory test revealed that the olfactory displays based on SAW atomizer had the presentation speeds faster than that of solenoid valves switching. Especially, the wearable one had an excellent temporal characteristic. These results largely depend on the difference in the odor delivery method. The data obtained in this study provides basic knowledge when we make olfactory contents.

Offset quadrature amplitude modulation based orthogonal frequency division multiplexing (OFDM/OQAM) is a promising multi-carrier modulation technique to achieve a low-sidelobe spectrum while maintaining orthogonality among subcarriers. However, a major shortcoming of OFDM/OQAM systems is the high peak-to-average power ratio (PAPR) of the transmit signal. To resolve the high-PAPR issue of traditional OFDM, a self-synchronized-scrambler-based selected-mapping has been investigated, where the transmit sequence is scrambled to reduce PAPR. In this method, the receiver must use a descrambler to recover the original data. However, the descrambling process leads to error propagation, which degrades the bit error rate (BER). As described herein, a partial scrambling overlapped selected mapping (PS-OSLM) scheme is proposed for PAPR reduction of OFDM/OQAM signals, where candidate sequences are generated using partial scrambling of original data. The best candidate, the one that minimizes the peak amplitude within multiple OFDM/OQAM symbols, is selected. In the proposed method, an overlap search algorithm for SLM is applied to reduce the PAPR of OFDM/OQAM signals. Numerical results demonstrate that our PS-OSLM proposal achieves better BER than full-scrambling overlapped SLM (FS-OSLM) in OFDM/OQAM systems while maintaining almost equivalent PAPR reduction capability as FS-OSLM and better PAPR than SLM without overlap search. Additionally, we derive a theoretical lower bound expression for OFDM/OQAM with PS-OSLM, and clarify the effectiveness of the proposed scheme.

In this paper, we consider interference suppression for a full-duplex (FD) multiuser system based on single-carrier transmission in frequency-selective channels where a FD base-station (BS) simultaneously communicates with half-duplex (HD) uplink and downlink mobile users. We propose a design method for time-domain filtering where the filters in the BS transmitter suppress inter-symbol interference (ISI) and downlink inter-user interference (IUI); those in the BS receiver, self-interference, ISI, and uplink IUI; and those in the downlink mobile users, co-channel interference (CCI) without the channel state information of the CCI channels. Simulation results indicate that the FD system based on the proposed method outperforms the conventional HD system and FD system based on multicarrier transmission.

As characterizing videos simultaneously from spatial and temporal cues have been shown crucial for video processing, with the shortage of temporal information of soft assignment, the vector of locally aggregated descriptor (VLAD) should be considered as a suboptimal framework for learning the spatio-temporal video representation. With the development of attention mechanisms in natural language processing, in this work, we present a novel model with VLAD following spatio-temporal self-attention operations, named spatio-temporal self-attention weighted VLAD (ST-SAWVLAD). In particular, sequential convolutional feature maps extracted from two modalities i.e., RGB and Flow are receptively fed into the self-attention module to learn soft spatio-temporal assignments parameters, which enabling aggregate not only detailed spatial information but also fine motion information from successive video frames. In experiments, we evaluate ST-SAWVLAD by using competitive action recognition datasets, UCF101 and HMDB51, the results shcoutstanding performance. The source code is available at:https://github.com/badstones/st-sawvlad.

With increasing technology scaling and the use of lower voltages, more research interest is being shown in variability-tolerant analog front end design. In this paper, we describe an adaptive amplitude control transmitter that is operated using differential signaling to reduce the temperature variability effect. It enables low power, low voltage operation by synergy between adaptive amplitude control and Vth temperature variation control. It is suitable for high-speed interface applications, particularly cable interfaces. By installing an aggressor circuit to estimate transmitter jitter and changing its frequency and activation rate, we were able to analyze the effects of the interface block on the input buffer and thence on the entire system. We also report a detailed estimation of the receiver clock-data recovery (CDR) operation for transmitter jitter estimation. These investigations provide suggestions for widening the eye opening of the transmitter.

In this paper, we propose a filter-and-forward relay scheme with energy harvesting for single-carrier transmission in frequency-selective channels. The relay node harvests energy from both the source node transmit signal and its own transmit signal by self-energy recycling. The signal received by the relay node is filtered to suppress the inter-symbol interference and then forwarded to the destination node using the harvested energy. We consider a filter design method based on the signal-to-interference-plus-noise power ratio maximization, subject to a constraint that limits the relay transmit power. In addition, we provide a golden-section search based algorithm to optimize the power splitting ratio of the power splitting protocol. The simulation results show that filtering and self-energy recycling of the proposed scheme are effective in improving performance. It is also shown that the proposed scheme is useful even when only partial channel state information is available.

In this paper, an analysis method for calculating balanced and unbalanced modes of a small antenna is summarized. Modal condactances which relate dissipated power of the antenna are directly obtained from standard S-parameters that we can measure by a 2-port network analyzer. We demonstrate the validity and effectiveness of the proposed method by simulation and measurement for a dipole antenna with unbalaned feed. The ratio of unbalanced-mode power to the total power (unbalanced-mode power ratio) calculated by the proposed method agrees precisely with that yielded by the conventional method using measured radiation patterns. Furthermore, we analyze a small loop antenna with unbalanced feed by the proposed method and show that the self-balancing characteristic appears when the loop is set in resonant state by loading capacitances or the whole length of the loop is less than 1/20th the wavelength.

To solve the problem of the self-deployment of heterogeneous directional wireless sensor networks in 3D space, this paper proposes a weighted Voronoi diagram-based self-deployment algorithm (3DV-HDDA) in 3D space. To improve the network coverage ratio of the monitoring area, the 3DV-HDDA algorithm uses the weighted Voronoi diagram to move the sensor nodes and introduces virtual boundary torque to rotate the sensor nodes, so that the sensor nodes can reach the optimal position. This work also includes an improvement algorithm (3DV-HDDA-I) based on the positions of the centralized sensor nodes. The difference between the 3DV-HDDA and the 3DV-HDDA-I algorithms is that in the latter the movement of the node is determined by both the weighted Voronoi graph and virtual force. Simulations show that compared to the virtual force algorithm and the unweighted Voronoi graph-based algorithm, the 3DV-HDDA and 3DV-HDDA-I algorithms effectively improve the network coverage ratio of the monitoring area. Compared to the virtual force algorithm, the 3DV-HDDA algorithm increases the coverage from 75.93% to 91.46% while the 3DV-HDDA-I algorithm increases coverage from 76.27% to 91.31%. When compared to the unweighted Voronoi graph-based algorithm, the 3DV-HDDA algorithm improves the coverage from 80.19% to 91.46% while the 3DV-HDDA-I algorithm improves the coverage from 72.25% to 91.31%. Further, the energy consumption of the proposed algorithms after 60 iterations is smaller than the energy consumption using a virtual force algorithm. Experimental results demonstrate the accuracy and effectiveness of the 3DV-HDDA and the 3DV-HDDA-I algorithms.

Linear feed-forward/feedback shift registers are used as an effective tool of testing circuits in various fields including built-in self-test and secure scan design. In this paper, we consider the issue of testing linear feed-forward/feedback shift registers themselves. To test linear feed-forward/feedback shift registers, it is necessary to generate a test sequence for each register. We first present an experimental result such that a commercial ATPG (automatic test pattern generator) cannot always generate a test sequence with high fault coverage even for 64-stage linear feed-forward/feedback shift registers. We then show that there exists a universal test sequence with 100% of fault coverage for the class of linear feed-forward/feedback shift registers so that no test generation is required, i.e., the cost of test generation is zero. We prove the existence theorem of universal test sequences for the class of linear feed-forward/feedback shift registers.

Recent studies suggest that learning “how to learn” is important because learners must be self-regulated to take more responsibility for their own learning processes, meta-cognitive control, and other generative learning thoughts and behaviors. The mechanism that enables a learner to self-regulate his/her learning strategies has been actively studied in classroom settings, but has seldom been studied in the area of real-world learning in out-of-school settings (e.g., environmental learning in nature). A feature of real-world learning is that a learner's cognition of the world is updated by his/her behavior to investigate the world, and vice versa. This paper models the mechanism of real-world learning for executing and self-regulating a learner's cognitive and behavioral strategies to self-organize his/her internal knowledge space. Furthermore, this paper proposes multimodal analytics to integrate heterogeneous data resources of the cognitive and behavioral features of real-world learning, to structure and archive the time series of strategies occurring through learner-environment interactions, and to assess how learning should be self-regulated for better understanding of the world. Our analysis showed that (1) intellectual achievements are built by self-regulating learning to chain the execution of cognitive and behavioral strategies, and (2) a clue to predict learning outcomes in the world is analyzing the quantity and frequency of strategies that a learner uses and self-regulates. Assessment based on these findings can encourage a learner to reflect and improve his/her way of learning in the world.