To obtain a full picture of potential applications for propagation-delay based X channels, it is important to obtain all feasible schemes of cyclic interference alignment including the encoder, channel instance, and decoder. However, when the dimension goes larger, theoretical analysis about this issue will become tedious and even impossible. In this letter, we propose a computer-aided solution by searching the channel space and the scheduling space, which can find all feasible schemes in details. Examples are given for some typical X channels. Computational complexity is further analyzed.

We have designed a near-infrared wavelength Si/CaF2 DFB quantum cascade laser and investigated the possibility of single-mode laser oscillation by analysis of the propagation mode, gain, scattering time of Si quantum well, and threshold current density. As the waveguide and resonator, a slab-type waveguide structure with a Si/CaF2 active layer sandwiched by SiO2 on a Si (111) substrate and a grating structure in an n-Si conducting layer were assumed. From the results of optical propagation mode analysis, by assuming a λ/4-shifted bragg waveguide structure, it was found that the single vertical and horizontal TM mode propagation is possible at the designed wavelength of 1.70µm. In addition, a design of the active layer is proposed and its current injection capability is roughly estimated to be 25.1kA/cm2, which is larger than required threshold current density of 1.4kA/cm2 calculated by combining analysis results of the scattering time, population inversion, gain of quantum cascade lasers, and coupling theory of a Bragg waveguide. The results strongly indicate the possibility of single-mode laser oscillation.

The selection of mutation strategy greatly affects the performance of differential evolution algorithm (DE). For different types of optimization problems, different mutation strategies should be selected. How to choose a suitable mutation strategy for different problems is a challenging task. To deal with this challenge, this paper proposes a novel DE algorithm based on local fitness landscape, called FLIDE. In the proposed method, fitness landscape information is obtained to guide the selection of mutation operators. In this way, different problems can be solved with proper evolutionary mechanisms. Moreover, a population adjustment method is used to balance the search ability and population diversity. On one hand, the diversity of the population in the early stage is enhanced with a relative large population. One the other hand, the computational cost is reduced in the later stage with a relative small population. The evolutionary information is utilized as much as possible to guide the search direction. The proposed method is compared with five popular algorithms on 30 test functions with different characteristics. Experimental results show that the proposed FLIDE is more effective on problems with high dimensions.

Pose estimation is a research hot spot in computer vision tasks and the key to computer perception of human activities. The core concept of human pose estimation involves describing the motion of the human body through major joint points. Large receptive fields and rich spatial information facilitate the keypoint localization task, and how to capture features on a larger scale and reintegrate them into the feature space is a challenge for pose estimation. To address this problem, we propose a multi-scale convergence network (MSCNet) with a large receptive field and rich spatial information. The structure of the MSCNet is based on an hourglass network that captures information at different scales to present a consistent understanding of the whole body. The multi-scale receptive field (MSRF) units provide a large receptive field to obtain rich contextual information, which is then selectively enhanced or suppressed by the Squeeze-Excitation (SE) attention mechanism to flexibly perform the pose estimation task. Experimental results show that MSCNet scores 73.1% AP on the COCO dataset, an 8.8% improvement compared to the mainstream CMUPose method. Compared to the advanced CPN, the MSCNet has 68.2% of the computational complexity and only 55.4% of the number of parameters.

In this paper, we propose an interpretation method on amplitude intensities for response waveforms of backward transient scattered field components for both E- and H-polarizations by a 2-D coated metal cylinder. A time-domain (TD) asymptotic solution, which is referred to as a TD Fourier transform method (TD-FTM), is derived by applying the FTM to a backward transient scattered field expressed by an integral form. The TD-FTM is represented by a combination of a direct geometric optical ray (DGO) and a reflected GO (RGO) series. We use the TD-FTM to derive amplitude intensity ratios (AIRs) between adjacent backward transient scattered field components. By comparing the numerical values of the AIRs with those of the influence factors that compose the AIRs, major factor(s) can be identified, thereby allowing detailed interpretation method on the amplitude intensities for the response waveforms of backward transient scattered field components. The accuracy and practicality of the TD-FTM are evaluated by comparing it with three reference solutions. The effectiveness of an interpretation method on the amplitude intensities for response waveforms of backward transient scattered field components is revealed by identifying major factor(s) affecting the amplitude intensities.

Common schedulers for long-term running services that perform task-level optimization fail to accommodate short-living batch processing (BP) jobs. Thus, many efficient job-level scheduling strategies are proposed for BP jobs. However, the existing scheduling strategies perform time-consuming objective optimization which yields non-negligible scheduling delay. Moreover, they tend to assign BP jobs in a centralized manner to reduce monetary cost and synchronization overhead, which can easily cause resource contention due to the task co-location. To address these problems, this paper proposes TEBAS, a time-efficient balance-aware scheduling strategy, which spreads all tasks of a BP job into the cluster according to the resource specifications of a single task based on the observation that computing tasks of a BP job commonly possess similar features. The experimental results show the effectiveness of TEBAS in terms of scheduling efficiency and load balancing performance.

In card-based cryptography, a deck of physical cards is used to achieve secure computation. A shuffle, which randomly permutes a card-sequence along with some probability distribution, ensures the security of a card-based protocol. The authors proposed a new class of shuffles called graph shuffles, which randomly permutes a card-sequence by an automorphism of a directed graph (New Generation Computing 2022). For a directed graph G with n vertices and m edges, such a shuffle could be implemented with pile-scramble shuffles with 2(n + m) cards. In this paper, we study graph shuffles and give an implementation, an application, and a slight generalization. First, we propose a new protocol for graph shuffles with 2n + m cards. Second, as a new application of graph shuffles, we show that any cyclic group shuffle, which is a shuffle over a cyclic group, is a graph shuffle associated with some graph. Third, we define a hypergraph shuffle, which is a shuffle by an automorphism of a hypergraph, and show that any hypergraph shuffle can also be implemented with pile-scramble shuffles.

This paper refers to the optimal voltage pair, which minimizes the energy consumption of LSI circuits under a target delay constraint, as a Minimum Energy Point (MEP). This paper proposes an approximation-based implementation method for an MEP tracking system over a wide voltage region. This paper focuses on the MEP characteristics that the energy loss is sufficiently small even though the voltage point changes near the MEP. For example, the energy loss is less than 5% even though the estimated MEP differs by a few tens of millivolts in comparison with the actual MEP. Therefore, the complexity for determining the MEP is relaxed by approximating complex operations such as the logarithmic or the exponential functions in the MEP tracking algorithm, which leads to hardware-/software-efficient implementation. When the MEP tracking algorithm is implemented in software, the MEP estimation time is reduced from 1ms to 13µs by the proposed approximation. When implemented in hardware, the proposed method can reduce the area of an MEP estimation circuit to a quarter. Measurement results of a 32-bit RISC-V processor fabricated in a 65-nm SOTB process technology show that the energy loss introduced by the proposed approximation is less than 2% in comparison with the MEP operation. Furthermore, we show that the MEP can be tracked within about 45 microseconds by the proposed MEP tracking system.

Backscatter communication is an emerging wireless access technology to realize ultra-low power terminals exploiting the modulated reflection of incident radio wave. This paper proposes a method to measure the phase angle of backscatter link using principal component analysis (PCA). The phase angle measurement of backscatter link at the receiver is essential to maximize the signal quality for subsequent demodulation and to measure the distance and the angle of arrival. The drawback of popular phase angle measurement with naive phase averaging and linear regression analysis is to produce erroneous phase angle, where the phase angle is close to $pmrac{pi}{2}$ radian and the signal quality is poor. The advantage of the proposal is quantified with a computer simulation, a conducted experiment and radio propagation experiments.

This letter theoretically analyzes and minimizes the L2-sensitivity for all-pass fractional delay digital filters of which structure is given by the normalized lattice structure. The L2-sensitivity is well known as one of the useful evaluation functions for measuring the performance degradation caused by quantizing filter coefficients into finite number of bits. This letter deals with two cases: L2-sensitivity minimization problem with scaling constraint, and the one without scaling constraint. It is proved that, in both of these two cases, any all-pass fractional delay digital filter with the normalized lattice structure becomes an optimal structure that analytically minimizes the L2-sensitivity.

This paper deals with a state-space approach for adaptive second-order IIR notch digital filters with constrained poles and zeros. A simplified iterative algorithm is derived from the gradient-descent method to minimize the mean-squared output of an adaptive notch digital filter. Then, stability and parameter-estimation bias are analyzed for the simplified iterative algorithm. A numerical example is presented to demonstrate the validity and effectiveness of the proposed adaptive state-space notch digital filter and parameter-estimation bias analysis.

Electromagnetic scattering in a coaxial cable having two flanges and concentric grooves is studied. The associated Weber-Orr transform is used to represent electromagnetic fields in an infinitely long cavity, and the mode-matching method is used to enforce boundary continuity. S-parameters obtained by our approach are compared with the reference solutions, and the characteristics are discussed when geometric parameters are varied. The results show that the proposed model provides cost effective and accurate solutions to the problem.

Self-directed learning in an appropriately designed environment can help learners retain knowledge tied to experience and motivate them to learn more. For teachers, however, it is difficult to design an environment to give to learners and to give feedback that reflects respect for their independent efforts, while for learners, it is difficult to set learning objectives on their own and to construct knowledge correctly based on their own efforts. In this research, we developed a learning support system that provides a mechanism for constructing an observational learning environment using virtual space and that encourages self-directed knowledge discovery. We confirmed that this system contributes to a learner's structural understanding and its retention and to a greater desire to learn at a level comparable to that of concept map creation, another active learning method.

Quadrature voltage-controlled oscillators (VCOs) with current-weight-average and voltage-weight-average phase-adjusting architectures are studied. The phase adjusting equalizes the oscillation frequency to the LC-resonant frequency. The merits of the equalization are explained by using Leeson's phase noise equation and the impulse sensitivity function (ISF). Quadrature VCOs with the phase-adjusting architectures are fabricated using 180-nm TSMC CMOS and show low-phase-noise performances compared to a conventional differential VCO. The ISF analysis and small-signal analysis also show that the drawbacks of the current-weight-average phase-adjusting and voltage-weight-average phase-adjusting architectures are current-source noise effect and large additional capacitance, respectively. A voltage-average-adjusting circuit with a source follower at its input alleviates the capacitance increase.

In this letter, we propose an energy beamforming empowered relaying scheme for a batteryless IoT network, where wireless-powered relays are deployed between the hybrid access point (HAP) and batteryless IoT devices to assist the uplink information transmission from the devices to the HAP. In particular, the HAP first exploits energy beamforming to efficiently transmit radio frequency (RF) signals to transfer energy to the relays and as the incident signals to enable the information backscattering of batteryless IoT devices. Then, each relay uses the harvested energy to forward the decoded signals from its corresponding batteryless IoT device to the HAP, where the maximum-ratio combing is used for further performance improvement. To maximize the network sum-rate, the joint optimization of energy beamforming vectors at the HAP, network time scheduling, power allocation at the relays, and relection coefficient at the users is investigated. As the formulated problem is non-convex, we propose an alternating optimization algorithm with the variable substitution and semi-definite relaxation (SDR) techniques to solve it efficiently. Specifically, we prove that the obtained energy beamforming matrices are always rank-one. Numerical results show that compared to the benchmark schemes, the proposed scheme can achieve a significant sum-rate gain.

When a disaster hits a network, network service disruptions can occur even if the network facilities have survived and battery and power generators are provided. This is because in the event of a disaster, the power supply will not be restarted within the lifetime of the battery or oil transportation will not be restarted before running out of oil and power will be running out. Therefore, taking a power grid into account is important. This paper proposes a polynomial-time algorithm to identify the critical location C*D of a communications network Nc when a disaster hits. Electrical power grid Np supplies power to the nodes of Nc, and a link in Nc is disconnected when a node or a link in Nc or Np fails. Here, the disaster area is modeled as co-centric disks and the failure probability is higher in the inner disk than the outer one. The location of the center of the disaster with the greatest expected number of disconnected links in Nc is taken as the critical location C*D.

This study proposes a new structure of a single-shunt rectifier circuit that can reduce circuit loss and improve efficiency over the conventional structure. The proposed structure can provide impedance matching to the measurement system (or receiving antenna) without the use of conventional matching circuits, such as stubs and tapers. The proposed structure can simultaneously perform full-wave rectification and impedance matching by placing a feeding point on the output filter's λ/4 transmission line. We use circuit simulation to compare the RF-DC conversion efficiency and circuit loss of the conventional and proposed structures. The simulation results show that the proposed structure has lower circuit loss and higher RF-DC conversion efficiency than the conventional structure. We fabricate the proposed rectifier circuit using a GaAs Schottky barrier diode. The simulation and measurement results show that the single-shunt rectifier circuit's proposed structure is capable of rectification and impedance matching. The fabricated rectifier circuit's RF-DC conversion efficiency reaches a maximum of 91.0%. This RF-DC conversion efficiency is a world record for 920-MHz band rectifier circuits.

Aiming at the problem of spatial focus regions distribution dispersion and dislocation in feature pyramid networks and insufficient feature dependency acquisition in both spatial and channel dimensions, this paper proposes a spatial-temporal aggregated shuffle attention for video instance segmentation (STASA-VIS). First, an mixed subsampling (MS) module to embed activating features from the low-level target area of feature pyramid into the high-level is designed, so as to aggregate spatial information on target area. Taking advantage of the coherent information in video frames, STASA-VIS uses the first ones of every 5 video frames as the key-frames and then propagates the keyframe feature maps of the pyramid layers forward in the time domain, and fuses with the non-keyframe mixed subsampled features to achieve time-domain consistent feature aggregation. Finally, STASA-VIS embeds shuffle attention in the backbone to capture the pixel-level pairwise relationship and dimensional dependencies among the channels and reduce the computation. Experimental results show that the segmentation accuracy of STASA-VIS reaches 41.2%, and the test speed reaches 34FPS, which is better than the state-of-the-art one stage video instance segmentation (VIS) methods in accuracy and achieves real-time segmentation.

Recently, the face hallucination method based on deep learning understands the mapping between low-resolution (LR) and high-resolution (HR) facial patterns by exploring the priors of facial structure. However, how to maintain the face structure consistency after the reconstruction of face images at different scales is still a challenging problem. In this letter, we propose a novel multi-scale structure prior learning (MSPL) for face hallucination. First, we propose a multi-scale structure prior block (MSPB). Considering the loss of high-frequency information in the LR space, we mainly process the input image in three different scale ascending dimensional spaces, and map the image to the high dimensional space to extract multi-scale structural prior information. Then the size of feature maps is recovered by downsampling, and finally the multi-scale information is fused to restore the feature channels. On this basis, we propose a local detail attention module (LDAM) to focus on the local texture information of faces. We conduct extensive face hallucination reconstruction experiments on a public face dataset (LFW) to verify the effectiveness of our method.

In this letter, we consider a global stabilization problem for a class of feedforward systems by an event-triggered control. This is an extended work of [10] in a way that there are uncertain feedforward nonlinearity and time-varying input delay in the system. First, we show that the considered system is globally asymptotically stabilized by a proposed event-triggered controller with a gain-scaling factor. Then, we also show that the interexecution times can be enlarged by adjusting a gain-scaling factor. A simulation example is given for illustration.