In our previous paper, we have proposed a new numerical technique for transient scattering problem of periodically arrayed dispersion media by using a combination of the fast inversion Laplace transform (FILT) method and Fourier series expansion method (FSEM), and analyzed the pulse response for several widths of the dispersion media or rectangular cavities. From the numerical results, we examined the influence of a periodically arrayed dispersion media with a rectangular cavity on the pulse response. In this paper, we analyzed the transient scattering problem for the case of dispersion media with slanted air regions by utilizing a combination of the FILT, FSEM, and multilayer division method (MDM), and investigated an influence for the slanted angle of an air region. In addition, we verified the computational accuracy for term of the MDM and truncation mode number of the electromagnetic fields.

To maintain blockchain-based services with ensuring its security, it is an important issue how to decide a mining reward so that the number of miners participating in the mining increases. We propose a dynamical model of decision-making for miners using an evolutionary game approach and analyze the stability of equilibrium points of the proposed model. The proposed model is described by the 1st-order differential equation. So, it is simple but its theoretical analysis gives an insight into the characteristics of the decision-making. Through the analysis of the equilibrium points, we show the transcritical bifurcations and hysteresis phenomena of the equilibrium points. We also design a controller that determines the mining reward based on the number of participating miners to stabilize the state where all miners participate in the mining. Numerical simulation shows that there is a trade-off in the choice of the design parameters.

In this paper, the scattering far-field from a circular electric conducting cylinder has been analyzed by physical optics (PO) approximation for both H and E polarizations. The evaluation of radiation integrations due to the PO current is conducted numerically and analytically. While non-uniform and uniform asymptotic solutions have been derived by the saddle point method, a separate approximation has been made for forward scattering direction. Comparisons among our approximation, direct numerical integration and exact solution results yield a good agreement for electrically large cylinders.

The electromagnetic environment is increasingly complex and changeable, and radar needs to meet the execution requirements of various tasks. Modern radars should improve their intelligence level and have the ability to learn independently in dynamic countermeasures. It can make the radar countermeasure strategy change from the traditional fixed anti-interference strategy to dynamically and independently implementing an efficient anti-interference strategy. Aiming at the performance optimization of target tracking in the scene where multiple signals coexist, we propose a countermeasure method of cognitive radar based on a deep Q-learning network. In this paper, we analyze the tracking performance of this method and the Markov Decision Process under the triangular frequency sweeping interference, respectively. The simulation results show that reinforcement learning has substantial autonomy and adaptability for solving such problems.

Social Skills Training (SST) has been used for years to improve individuals' social skills toward building a better daily life. In SST carried out by humans, the social skills level is usually evaluated through a verbal interview conducted by the trainer. Although this evaluation is based on psychiatric knowledge and professional experience, its quality depends on the trainer's capabilities. Therefore, to standardize such evaluations, quantifiable metrics are required. To meet this need, the second edition of the Social Responsiveness Scale (SRS-2) offers a viable solution because it has been extensively tested and standardized by empirical research works. This paper describes the development of an automated method to evaluate a person's social skills level based on SRS-2. We use multimodal features, including BERT-based features, and perform score estimation with a 0.76 Pearson correlation coefficient while using feature selection. In addition, we examine the linguistic aspects of BERT-based features through subjective evaluations. Consequently, the BERT-based features show a strong negative correlation with human subjective scores of fluency, appropriate word choice, and understandable speech structure.

In this paper, we propose the first private decision tree evaluation (PDTE) schemes which are suitable for use in Machine Learning as a Service (MLaaS) scenarios. In our schemes, a user and a model owner send the ciphertexts of a sample and a decision tree model, respectively, and a single server classifies the sample without knowing the sample nor the decision tree. Although many PDTE schemes have been proposed so far, most of them require to reveal the decision tree to the server. This is undesirable because the classification model is the intellectual property of the model owner, and/or it may include sensitive information used to train the model, and therefore the model also should be hidden from the server. In other PDTE schemes, multiple servers jointly conduct the classification process and the decision tree is kept secret from the servers under the assumption they do not collude. Unfortunately, this assumption may not hold because MLaaS is usually provided by a single company. In contrast, our schemes do not have such problems. In principle, fully homomorphic encryption allows us to classify an encrypted sample based on an encrypted decision tree, and in fact, the existing non-interactive PDTE scheme can be modified so that the server classifies only handling ciphertexts. However, the resulting scheme is less efficient than ours. We also show the experimental results for our schemes.

Multiparty computation (MPC) is the technology that computes an arbitrary function represented as a circuit without revealing input values. Typical MPC uses secret sharing (SS) schemes, garbled circuit (GC), and homomorphic encryption (HE). These cryptographic technologies have a trade-off relationship for the computation cost, communication cost, and type of computable circuit. Hence, the optimal choice depends on the computing resources, communication environment, and function related to applications. The private decision tree evaluation (PDTE) is one of the important applications of secure computation. There exist several PDTE protocols with constant communication rounds using GC, HE, and SS-MPC over the field. However, to the best of our knowledge, PDTE protocols with constant communication rounds using MPC based on SS over the ring (requiring only lower computation costs and communication complexity) are non-trivial and still missing. In this paper, we propose a PDTE protocol based on a three-party computation (3PC) protocol over the ring with one corruption. We also propose another three-party PDTE protocol over the field with one corruption that is more efficient than the naive construction.

Given a set P of n points and an integer k, we wish to place k facilities on points in P so that the minimum distance between facilities is maximized. The problem is called the k-dispersion problem, and the set of such k points is called a k-dispersion of P. Note that the 2-dispersion problem corresponds to the computation of the diameter of P. Thus, the k-dispersion problem is a natural generalization of the diameter problem. In this paper, we consider the case of k=3, which is the 3-dispersion problem, when P is in convex position. We present an O(n2)-time algorithm to compute a 3-dispersion of P.

In this paper, a macro cell switching scheme for distributed antennas is proposed. In conventional distributed antenna transmission (DAT), the macro cell to which each antenna belongs is fixed. Though a cell-free system has been investigated because of its higher system throughput, the implementation cost of front-hauls can be excessive. To increase the flexibility of resource allocation in the DAT with moderate front-haul complexity, we propose the macro cell switching of distributed antennas (DAs). In the proposed scheme, DAs switch their attribution macro cells depending on the amount of pre-assigned connections. Numerical results obtained through computer simulation show that the proposed scheme realizes a better system throughput than the conventional system, especially when the number of user equipments (UEs) is smaller and the distance between DAs are larger.

A 6.5Gb/s shared bus that uses a 65nm CMOS pulse transceiver chip with a low frequency equalizer and electromagnetic connectors based on two types of transmission line couplers is presented. The amount of backplane wiring is reduced by a factor of 1/16 and total connector volume by a factor of 1/246. It reduces the size and weight of a satellite processor system by 60%, increases the data rate by a factor of 2.6, and satisfies the EMC standard for withstanding the strong shock of rocket launch.

Developing well-designed presentation slides is challenging for many people, especially novices. The ability to build high quality slideshows is becoming more important in society. In this study, a neural network was used to identify novice vs. well-designed presentation slides based on visual and structural features. For such a purpose, a dataset containing 1,080 slide pairs was newly constructed. One of each pair was created by a novice, and the other was the improved one by the same person according to the experts' advice. Ten checkpoints frequently pointed out by professional consultants were extracted and set as prediction targets. The intrinsic problem was that the label distribution was imbalanced, because only a part of the samples had corresponding design problems. Therefore, re-sampling methods for addressing class imbalance were applied to improve the accuracy of the proposed model. Furthermore, we combined the target task with an assistant task for transfer and multi-task learning, which helped the proposed model achieve better performance. After the optimal settings were used for each checkpoint, the average accuracy of the proposed model rose up to 81.79%. With the advice provided by our assessment system, the novices significantly improved their slide design.

To realize a stable and efficient wireless power transfer (WPT) system that can be used in any environment, it is necessary to inspect the influence of environmental interference along the power transmission path of the WPT system. In this paper, attempts have been made to reduce the influence of the medium with a dielectric and conductive loss on the WPT system using spiral resonators for resonator-coupled type wireless power transfer (RC-WPT) system. An important element of the RC-WPT system is the resonators because they improve resonant characteristics by changing the shape or combination of spiral resonators to confine the electric field that mainly causes electrical loss in the system as much as possible inside the resonator. We proposed a novel dual-spiral resonator as a candidate and compared the basic characteristics of the RC-WPT system with conventional single-spiral and dual-spiral resonators. The parametric values of the spiral resonators, such as the quality factors and the coupling coefficients between resonators with and without a lossy medium in the power transmission path, were examined. For the lossy mediums, pure water or tap water filled with acryl bases was used. The maximum transmission efficiency of the RC-WPT system was then observed by tuning the matching condition of the system. Following that, the transmission efficiency of the system with and without lossy medium was investigated. These inspections revealed that the performance of the RC-WPT system with the lossy medium using the modified shape spiral resonator, which is the dual-spiral resonator proposed in our laboratory, outperformed the system using the conventional single-spiral resonator.

Integer division is one of the most fundamental arithmetic operators and is ubiquitously used. However, the existing division protocols in secure multi-party computation (MPC) are inefficient and very complex, and this has been a barrier to applications of MPC such as secure machine learning. We already have some secure division protocols working in Z2n. However, these existing results have drawbacks that those protocols needed many communication rounds and needed to use bigger integers than in/output. In this paper, we improve a secure division protocol in two ways. First, we construct a new protocol using only the same size integers as in/output. Second, we build efficient constant-round building blocks used as subprotocols in the division protocol. With these two improvements, communication rounds of our division protocol are reduced to about 36% (87 rounds → 31 rounds) for 64-bit integers in comparison with the most efficient previous one.

The newly proposed orthogonal time frequency space (OTFS) system exhibits excellent error performance on high-Doppler fading channels. However, the rectangular prototype window function (PWF) inherent in OTFS leads to high out-of-band emission (OOBE), which reduces the spectral efficiency in multi-user scenarios. To this end, this paper presents an OTFS system based on bi-orthogonal frequency division multiplexing (OTFS-BFDM) modulation. In OTFS-BFDM systems, PWFs with bi-orthogonal properties can be optimized to provide lower OOBE than OTFS, which is a special case with rectangular PWF. We further derive that the OTFS-BFDM system is sparsely-connected so that the low-complexity message passing (MP) decoding algorithm can be adopted. Moreover, the power spectral density, peak to average power ratio (PAPR) and bit error rate (BER) of the OTFS-BFDM system with different PWFs are compared. Simulation results show that: i) the use of BFDM modulation significantly inhibits the OOBE of OTFS system; ii) the better the frequency-domain localization of PWFs, the smaller the BER and PAPR of OTFS-BFDM system.

Pedestrian detection is a significant task in computer vision. In recent years, it is widely used in applications such as intelligent surveillance systems and automated driving systems. Although it has been exhaustively studied in the last decade, the occlusion handling issue still remains unsolved. One convincing idea is to first detect human body parts, and then utilize the parts information to estimate the pedestrians' existence. Many parts-based pedestrian detection approaches have been proposed based on this idea. However, in most of these approaches, the low-quality parts mining and the clumsy part detector combination is a bottleneck that limits the detection performance. To eliminate the bottleneck, we propose Discriminative Part CNN (DP-CNN). Our approach has two main contributions: (1) We propose a high-quality body parts mining method based on both convolutional layer features and body part subclasses. The mined part clusters are not only discriminative but also representative, and can help to construct powerful pedestrian detectors. (2) We propose a novel method to combine multiple part detectors. We convert the part detectors to a middle layer of a CNN and optimize the whole detection pipeline by fine-tuning that CNN. In experiments, it shows astonishing effectiveness of optimization and robustness of occlusion handling.

Neural network-based three-dimensional (3D) reconstruction methods have produced promising results. However, they do not pay particular attention to reconstructing detailed parts of objects. This occurs because the network is not designed to capture the fine details of objects. In this paper, we propose a network designed to capture both the coarse and fine details of objects to improve the reconstruction of the fine parts of objects.

In this paper, we propose rate adaptation mechanisms for robust and low-latency video transmissions exploiting multiple access points (Multi-AP) wireless local area networks (WLANs). The Multi-AP video transmissions employ link-level broadcast and packet-level forward error correction (FEC) in order to realize robust and low-latency video transmissions from a WLAN station (STA) to a gateway (GW). The PHY (physical layer) rate and FEC rate play a key role to control trade-off between the achieved reliability and airtime (i.e., occupancy period of the shared channel) for Multi-AP WLANs. In order to finely control this trade-off while improving the transmitted video quality, the proposed rate adaptation controls PHY rate and FEC rate to be employed for Multi-AP transmissions based on the link quality and frame format of conveyed video traffic. With computer simulations, we evaluate and investigate the effectiveness of the proposed rate adaptation in terms of packet delivery rate (PDR), airtime, delay, and peak signal to noise ratio (PSNR). Furthermore, the quality of video is assessed by using the traffic encoded/decoded by the actual video encoder/decoder. All these results show that the proposed rate adaptation controls trade-off between the reliability and airtime well while offering the high-quality and low-latency video transmissions.

We present detailed measurements and analysis of the guided acoustic wave Brillouin scattering (GAWBS)-induced depolarization noise in a multi-core fiber (MCF) used for a digital coherent optical transmission. We first describe the GAWBS-induced depolarization noise in an uncoupled four-core fiber (4CF) with a 125μm cladding and compare the depolarization noise spectrum with that of a standard single-mode fiber (SSMF). We found that off-center cores in the 4CF are dominantly affected by higher-order TRn,m modes rather than the TR2,m mode unlike in the center core, and the total power of the depolarization noise in the 4CF was almost the same as that in the SSMF. We also report measurement results for the GAWBS-induced depolarization noise in an uncoupled 19-core fiber with a 240μm cladding. The results indicate that the amounts of depolarization noise generated in the cores are almost identical. Finally, we evaluate the influence of GAWBS-induced polarization crosstalk (XT) on a coherent QAM transmission. We found that the XT limits the achievable multiplicity of the QAM signal to 64 in a transoceanic transmission with an MCF.

Unsupervised domain adaptation (DA) is a challenging machine learning problem since the labeled training (source) and unlabeled testing (target) sets belong to different domains and then have different feature distributions, which has recently attracted wide attention in micro-expression recognition (MER). Although some well-performing unsupervised DA methods have been proposed, these methods cannot well solve the problem of unsupervised DA in MER, a. k. a., cross-domain MER. To deal with such a challenging problem, in this letter we propose a novel unsupervised DA method called Joint Patch weighting and Moment Matching (JPMM). JPMM bridges the source and target micro-expression feature sets by minimizing their probability distribution divergence with a multi-order moment matching operation. Meanwhile, it takes advantage of the contributive facial patches by the weight learning such that a domain-invariant feature representation involving micro-expression distinguishable information can be learned. Finally, we carry out extensive experiments to evaluate the proposed JPMM method is superior to recent state-of-the-art unsupervised DA methods in dealing with cross-domain MER.

Object contour detection is a task of extracting the shape created by the boundaries between objects in an image. Conventional methods limit the detection targets to specific categories, or miss-detect edges of patterns inside an object. We propose a new method to represent a contour image where the pixel value is the distance to the boundary. Contour detection becomes a regression problem that estimates this contour image. A deep convolutional network for contour estimation is combined with stereo vision to detect unspecified object contours. Furthermore, thanks to similar inference targets and common network structure, we propose a network that simultaneously estimates both contour and disparity with fully shared weights. As a result of experiments, the multi-tasking network drew a good precision-recall curve, and F-measure was about 0.833 for FlyingThings3D dataset. L1 loss of disparity estimation for the dataset was 2.571. This network reduces the amount of calculation and memory capacity by half, and accuracy drop compared to the dedicated networks is slight. Then we quantize both weights and activations of the network to 3-bit. We devise a dedicated hardware architecture for the quantized CNN and implement it on an FPGA. This circuit uses only internal memory to perform forward propagation calculations, that eliminates high-power external memory accesses. This circuit is a stall-free pixel-by-pixel pipeline, and performs 8 rows, 16 input channels, 16 output channels, 3 by 3 pixels convolution calculations in parallel. The convolution calculation performance at the operating frequency of 250 MHz is 9 TOPs/s.