In view of the different spatial and temporal resolutions of observed multi-source heterogeneous carbon dioxide data and the uncertain quality of observations, a data fusion prediction model for observed multi-scale carbon dioxide concentration data is studied. First, a wireless carbon sensor network is created, the gross error data in the original dataset are eliminated, and remaining valid data are combined with kriging method to generate a series of continuous surfaces for expressing specific features and providing unified spatio-temporally normalized data for subsequent prediction models. Then, the long short-term memory network is used to process these continuous time- and space-normalized data to obtain the carbon dioxide concentration prediction model at any scales. Finally, the experimental results illustrate that the proposed method with spatio-temporal features is more accurate than the single sensor monitoring method without spatio-temporal features.

Recently, broadband wireless communication has been significantly enhanced; thus, frequency spectrum scarcity has become an extremely serious problem. Spatial frequency reuse based on spectrum databases has attracted significant attention. The spectrum database collects wireless environment information, such as the radio signal strength indicator (RSSI), estimates the propagation coefficient for the propagation loss and shadow effect, and finds a vacant area where the secondary system uses the frequency spectrum without harmful interference to the primary system. Wireless sensor networks are required to collect the RSSI from a radio environmental monitor. However, a large number of RSSI values should be gathered because numerous sensors are spread over the wireless environment. In this study, a data compression technique based on spatial features, such as buildings and houses, is proposed. Using computer simulation and experimental evaluation, we confirm that the proposed compression method successfully reduces the size of the RSSI and restores the original RSSI in the recovery process.

This paper presents recent progress on high frequency and wide bandwidth GaN high power amplifiers (PAs) that are usable for high-data-rate wireless communications and modern radar systems. The key devices and design techniques for PA are described in this paper. The results of the state-of-the art GaN PAs for microwave to millimeter-wave applications and design methodology for ultra-wideband GaN PAs are shown. In order to realize high output power density, InAlGaN/GaN HEMTs were employed. An output power density of 14.8 W/mm in S-band was achieved which is 1.5 times higher than that of the conventional AlGaN/GaN HEMTs. This technique was applied to the millimeter-wave GaN PAs, and a measured power density at 96 GHz was 3 W/mm. The modified Angelov model was employed for a millimeter-wave design. W-band GaN MMIC achieved the maximum Pout of 1.15 W under CW operation. The PA with Lange coupler achieved 2.6 W at 94 GHz. The authors also developed a wideband PA. A power combiner with an impedance transformation function based on the transmission line transformer (TLT) technique was adopted for the wideband PA design. The fabricated PA exhibited an average Pout of 233 W, an average PAE of 42 %, in the frequency range of 0.5 GHz to 2.1 GHz.

Quantum noise ultimately restricts the transmission distance in fiber communication systems using optical amplifiers. This paper investigates the quantum-noise-limited performance of optical binary phase-shift keying transmission using gain-saturated phase-sensitive amplifiers (PSAs) as optical repeaters. It is shown that coherent state transmission, where ultimately clean light in the classical sense is transmitted, and endless transmission, where the transmission distance is not restricted, are theoretically achievable under certain system conditions owing to the noise suppression effects of the gain-saturated PSA.

In this paper, we address the problem of detector design in severely frequency-selective channels for spatial multiplexing systems that adopt filter bank multicarrier based on offset quadrature amplitude modulation (FBMC/OQAM) as the communication waveforms. We consider decision feedback equalizers (DFEs) that use multiple feedback filters to jointly cancel the post-cursor components of inter-symbol interference, inter-antenna interference, and, in some configuration, inter-subchannel interference. By exploiting the special structures of the correlation matrix and the staggered property of the FBMC/OQAM signals, we obtain an efficient method of computing the DFE coefficients that requires a smaller number of multiplications than the linear equalizer (LE) and conventional DFE do. The simulation results show that the proposed detectors considerably outperform the LE and conventional DFE at moderate-to-high signal-to-noise ratios.

The extended visual cryptography scheme (EVCS) proposed by Ateniese et al. is one of variations of the visual cryptography scheme such that a secret image is recovered by superimposition of certain qualified collections of shares, where cover images are visible on respective shares. In this paper, we give a new definition of the EVCS for improving visibility of the recovered secret image as well as the cover images. We formulate the problem to construct the basis matrices of the EVCS with the minimum pixel expansion as an integer programming problem. We solve the integer programming problem for general access structures with less than or equal to five participants and show that basis matrices with a smaller pixel expansion can be obtained for certain cases. We also analyze security of the EVCS meeting the new definition from an information-theoretic viewpoint. We give a condition under which any forbidden collection of shares does not reveal any additional information on not only a secret image but also the cover images that are not visible on the other shares.

Autonomous vehicles and advanced driver assistant systems (ADAS) are receiving notable attention as research fields in both academia and private industry. Some decision-making systems use sets of logical rules to map knowledge of the ego-vehicle and its environment into actions the ego-vehicle should take. However, such rulesets can be difficult to create — for example by manually writing them — due to the complexity of traffic as an operating environment. Furthermore, the building blocks of the rules must be defined. One common solution to this is using an ontology specifically aimed at describing traffic concepts and their hierarchy. These ontologies must have a certain expressive power to enable construction of useful rules. We propose a process of generating sets of explanatory rules for ADAS applications from data using ontology as a base vocabulary and present a ruleset generated as a result of our experiments that is correct for the scope of the experiment.

Recently the data-driven learning of dynamic systems has become a promising approach because no physical knowledge is needed. Pure machine learning approaches such as Gaussian process regression (GPR) learns a dynamic model from data, with all physical knowledge about the system discarded. This goes from one extreme, namely methods based on optimizing parametric physical models derived from physical laws, to the other. GPR has high flexibility and is able to model any dynamics as long as they are locally smooth, but can not generalize well to unexplored areas with little or no training data. The analytic physical model derived under assumptions is an abstract approximation of the true system, but has global generalization ability. Hence the optimal learning strategy is to combine GPR with the analytic physical model. This paper proposes a method to learn dynamic systems using GPR with analytic ordinary differential equations (ODEs) as prior information. The one-time-step integration of analytic ODEs is used as the mean function of the Gaussian process prior. The total parameters to be trained include physical parameters of analytic ODEs and parameters of GPR. A novel method is proposed to simultaneously learn all parameters, which is realized by the fully Bayesian GPR and more promising to learn an optimal model. The standard Gaussian process regression, the ODE method and the existing method in the literature are chosen as baselines to verify the benefit of the proposed method. The predictive performance is evaluated by both one-time-step prediction and long-term prediction. By simulation of the cart-pole system, it is demonstrated that the proposed method has better predictive performances.

Relation extraction is one of the key basic tasks in natural language processing in which distant supervision is widely used for obtaining large-scale labeled data without expensive labor cost. However, the automatically generated data contains massive noise because of the wrong labeling problem in distant supervision. To address this problem, the existing research work mainly focuses on removing sentence-level noise with various sentence selection strategies, which however could be incompetent for disposing word-level noise. In this paper, we propose a novel neural framework considering both intra-sentence and inter-sentence relevance to deal with word-level and sentence-level noise from distant supervision, which is denoted as Sentence-Related Gated Piecewise Convolutional Neural Networks (SR-GPCNN). Specifically, 1) a gate mechanism with multi-head self-attention is adopted to reduce word-level noise inside sentences; 2) a soft-label strategy is utilized to alleviate wrong-labeling propagation problem; and 3) a sentence-related selection model is designed to filter sentence-level noise further. The extensive experimental results on NYT dataset demonstrate that our approach filters word-level and sentence-level noise effectively, thus significantly outperforms all the baseline models in terms of both AUC and top-n precision metrics.

In order to upgrade the refresh rate about High-Resolution (1280×1024) OLED-on-Silicon (OLEDoS) microdisplay, this paper discusses one compression scan strategy by reducing scan time redundancy. This scan strategy firstly compresses the low-bit gray level scan serial as one unit; second, the scan unit is embedded into the high-bit gray level serial and new scan sequence is generated. Furthermore, micro-display platform is designed to verify the scan strategy performance. The experiment shows that this scan strategy can deal with 144Hz refresh rate, which is obviously faster than the traditional scan strategy.

Given a set P of n points on which facilities can be placed and an integer k, we want to place k facilities on some points so that the minimum distance between facilities is maximized. The problem is called the k-dispersion problem. In this paper, we consider the 3-dispersion problem when P is a set of points on a plane (2-dimensional space). Note that the 2-dispersion problem corresponds to the diameter problem. We give an O(n) time algorithm to solve the 3-dispersion problem in the L∞ metric, and an O(n) time algorithm to solve the 3-dispersion problem in the L1 metric. Also, we give an O(n2 log n) time algorithm to solve the 3-dispersion problem in the L2 metric.

Iterative block decision feedback equalization with hard-decision feedback (HD-IBDFE) was proposed for single-carrier transmission with frequency-domain equalization (SC-FDE). The detection performance hinges upon not only error propagation, but also the accuracy of estimating the parameters used to re-compute the equalizer coefficients at each iteration. In this paper, we use the erasure zone (EZ) to de-emphasize the feedback values when the hard decisions are not reliable. EZ use also enables a more accurate, and yet computationally more efficient, parameter estimation method than HD-IBDFE. We show that the resulting equalizer coefficients share the same mathematical form as that of the HD-IBDFE, thereby preserving the merit of not requiring matrix inverse operations in calculating the equalizer coefficients. Simulations show that, by using the EZ and the proposed parameter estimation method, a significant performance improvement over the conventional HD-IBDFE can be achieved, but with lower complexity.

Optical code-division multiple-access (CDMA) techniques provide multi-user data transmission services in optical wireless and fiber communication systems. Several signature codes, such as modified prime sequence codes (MPSCs), generalized MPSCs (GMPSCs) and modified pseudo-orthogonal M-sequence sets, have been proposed for synchronous optical CDMA systems. In this paper, a new scheme is proposed for synchronous optical CDMA to increase the number of users and, consequently, to increase the total data rate without increasing the chip rate. The proposed scheme employs a GMPSC and an extended bi-orthogonal code which is a unipolar code generated from a bipolar Walsh code. Comprehensive comparisons between the proposed scheme and several conventional schemes are shown. Moreover, bit error rate performance and energy efficiency of the proposed scheme are evaluated comparing with those of the conventional optical CDMA schemes under atmospheric propagation environment.

Recently, automated recognition and analysis of human emotion has attracted increasing attention from multidisciplinary communities. However, it is challenging to utilize the emotional information simultaneously from multiple modalities. Previous studies have explored different fusion methods, but they mainly focused on either inter-modality interaction or intra-modality interaction. In this letter, we propose a novel two-stage fusion strategy named modality attention flow (MAF) to model the intra- and inter-modality interactions simultaneously in a unified end-to-end framework. Experimental results show that the proposed approach outperforms the widely used late fusion methods, and achieves even better performance when the number of stacked MAF blocks increases.

In this paper, we propose a design method for a diplexer using a surface acoustic wave (SAW) filter, a multilayer ceramic filter, chip inductors, and chip capacitors. A controllable transmission zero can be created in the stopband by designing matching circuits based on the out-of-band characteristics of the SAW filter using this method. The proposed method can achieve good attenuation performance and a compact size because it does not use an additional resonator for creating the controllable transmission zero and the matching circuits are composed of only five components. A diplexer is designed for 2.4 GHz wireless systems and a global positioning system receiver using the proposed method. It is compact (8.0 mm × 8.0 mm), and the measurement results indicate good attenuation performance with the controllable transmission zero.

In this letter, a method for the construction of polar codes based on the mutual information approximation (MIA) is proposed for the 4Tb/in2 two-dimensional inter-symbol interference (2D-ISI) channels, such as the bit-patterned magnetic recording (BPMR) and two-dimensional magnetic recording (TDMR). The basic idea is to exploit the MIA between the input and output of a 2D detector to establish a log-likelihood ratio (LLR) distribution model based on the MIA results, which compensates the gap caused by the 2D ISI channel. Consequently, the polar codes obtained by the optimization techniques previously developed for the additive white Gaussian noise (AWGN) channels can also have satisfactory performances over 2D-ISI channels. Simulated results show that the proposed polar codes can outperform the polar codes constructed by the traditional methods over 4Tb/in2 2D-ISI channels.

This paper reviews the evolutionary process that reduced the transmission loss of silica optical fibers from the report of 20dB/km by Corning in 1970 to the current record-low loss. At an early stage, the main effort was to remove impurities especially hydroxy groups for fibers with GeO2-SiO2 core, resulting in the loss of 0.20dB/km in 1980. In order to suppress Rayleigh scattering due to composition fluctuation, pure-silica-core fibers were developed, and the loss of 0.154dB/km was achieved in 1986. As the residual main factor of the loss, Rayleigh scattering due to density fluctuation was actively investigated by utilizing IR and Raman spectroscopy in the 1990s and early 2000s. Now, ultra-low-loss fibers with the loss of 0.150dB/km are commercially available in trans-oceanic submarine cable systems.

This study presents a formal verification method for Galois-field (GF) arithmetic circuits with the characteristics of more than two values. The proposed method formally verifies the correctness of circuit functionality (i.e., the input-output relations given as GF-polynomials) by checking the equivalence between a specification and a gate-level netlist. We represent a netlist using simultaneous algebraic equations and solve them based on a novel polynomial reduction method that can be efficiently applied to arithmetic over extension fields $mathbb{F}_{p^m}$, where the characteristic p is larger than two. By using the reverse topological term order to derive the Gröbner basis, our method can complete the verification, even when a target circuit includes bugs. In addition, we introduce an extension of the Galois-Field binary moment diagrams to perform the polynomial reductions faster. Our experimental results show that the proposed method can efficiently verify practical $mathbb{F}_{p^m}$ arithmetic circuits, including those used in modern cryptography. Moreover, we demonstrate that the extended polynomial reduction technique can enable verification that is up to approximately five times faster than the original one.

Video inpainting is a task of filling missing regions in videos. In this task, it is important to efficiently use information from other frames and generate plausible results with sufficient temporal consistency. In this paper, we present a video inpainting method jointly using affine transformation and deformable convolutions for frame alignment. The former is responsible for frame-scale rough alignment and the latter performs pixel-level fine alignment. Our model does not depend on 3D convolutions, which limits the temporal window, or troublesome flow estimation. The proposed method achieves improved object removal results and better PSNR and SSIM values compared with previous learning-based methods.

Codebooks with small inner-product correlation have applied in direct spread code division multiple access communications, space-time codes and compressed sensing. In general, it is difficult to construct optimal codebooks achieving the Welch bound or the Levenstein bound. This paper focuses on constructing asymptotically optimal codebooks with characters of cyclic groups. Based on the proposed constructions, two classes of asymptotically optimal codebooks with respect to the Welch bound are presented. In addition, parameters of these codebooks are new.