The main interest of this paper is the theoretical analysis of a recursive periodically time varying digital filter. The generalized transfer function of a recursive periodically time varying digital filter was obtained from its difference equation. It was proved that by making use of the generalized transfer function, we can not only derive the input and output relationship of a recursive periodically time varying digital filter easily but also obtain its equivalent structure effectively. An interesting property of a recursive periodically time varying digital filter was also derived by making use of its generalized transfer function. Moreover, it was completed in this paper the investigation of the generalized transfer functions and impulse responses of other periodically time varying models, including an input sampling polyphase model and an output sampling polyphase model. Meanwhile, the multirate Quadrature Mirror Filter bank system was proved by the authors to be a periodically time varying system. Several examples were also provided to illustrate the effectiveness of using the generalized transfer function to obtain the equivalent structure of a recursive periodically time varying digital filter.

An accurate numerical solution is presented for the electromagnetic scattering from a double strip grating, where the strip planes are each supported by a dielectric slab. This structure is a model of polarization diplexers. The direction of propagation and the polarization of the incident plane wave are arbitrary. We derive a set of singular integral equations and solve it by the moment method, where the Chebyshev polynomials are successfully used as the basis and the testing functions. By numerical computations we examine the dependence of the diplexing properties on grating parameters in detail. The cross-polarization characteristics at skew incidence are also referred. From these results we construct an algorithm for the design of polarization diplexers.

In a display system with a line-of-gaze (LOG) controller, it is difficult to make the directions and motions of a LOG-controlled object coincide as closely as possible in the display with the user's intended LOG-directions and motions. This is because LOG behavior is not only smooth, but also saccadic due to the problem of involuntary eye movement. This article introduces a flexible on-line LOG-control scheme to realize nearly perfect LOG operation. Using a mesh-wise cursor pattern, the first visual experiment elucidates subjectively that a Kalman Filter (KF) for smoothing and predicting is effective in filtering out macro-saccadic changes of the LOG and in predicting sudden changes of the saccade while movement is in progress. It must be assumed that the LOG trajectory can be described by a linear position-velocity-acceleration approximation of Sklansky Model (SM). Furthermore, the second experiment uses a four-point pattern and simulations to scrutinize the two physical properties of velocity and direction-changes of the LOG in order to quantitatively and efficiently resolve "moving" and "gazing". In order to greatly reduce the number of LOG-small-position changes while gazing, the proposed Gaze-Holding algorithm (GH) with a gaze-potential function is combined with the KF. This algorithm allows the occurrence frequency of the micro-saccade to be reduced from approximately 25 Hz to 1 or 2 Hz. This great reduction in the frequency of the LOG-controlled object moves is necessary to achieve the user's desired LOG-response while gazing. Almost perfect LOG control is accomplished by the on-line SM+KF+GH scheme while either gazing or moving. A menu-selection task was conducted to verify the effectiveness of the proposed on-line LOG-control method.

A file transmission net N is a directed communication net with vertex set V and arc set B such that each arc e has positive cost ca(e) and each vertex u in V has two parameters of positive cost cv(u) and nonnegative integral demand d(u). Some information to be distributed through N is supposed to have been written in a file and the written file is denoted by J, where the file means an abstract concept of information carrier. In this paper, we define concepts of file transfer, positive demand vertex set U and mother vertex set M, and we consider a problem of distributing d(v) copies of J through a file transfer on N from a vertex v1 to every vertex v in V. As a result, for N such that MU, we propose an O(nm+n2 log n) algorithm, where n=|V| and m=|B|, for synthesizing a file transfer whose total cost of transmitting and making copies of J is minimum on N.

A new class of the universal representation for the positive integers is proposed. The positive integers are divided into infinite groups, and each positive integer n is represented by a pair of integers (p,q), which means that n is the q-th number in the p-th group. It is shown that the new class includes the message length strategy as a special case, and the asymptotically optimal representation can easily be realized. Furthermore, a new asymptotically and practically efficient representation scheme is proposed, which preserves the numerical, lexicographical, and length orders.

This paper describes a mixed mode circuit simulation by the direct and relaxation-based methods with dynamic network partitioning. For the efficient circuit simulation by the direct method, the algorithms with circuit partitioning and latency technique have been studied. Recently, the hierarchical decomposition and latency and their validities have been researched. Network tearing techniques enable independent analysis of each subnetwork except for the local datum nodes. Therefore, if the local datum nodes are also torn, each subnetwork is separated entirely. Since the network separation is based on relaxation approach, the implementation of the separation technique in the circuit simulation by the direct method corresponds to performing the mixed mode simulation by the direct and relaxation-based methods. In this paper, a dynamic "network separation" technique based on the tightness of the coupling between subnetworks is suggested. Then, by the introduction of dynamic network separation into the simulator SPLIT with hierarchical decomposition and latency, the mixed mode circuit simulator, which selects the direct method or the relaxation method and determines the block size of the latent circuit dynamically and suitably, is constructed.

A distributed processing system is described, which is dedicated to multilayer SOG routing. The system is constructed of global and detailed routers, each based on different rip-up and rerouting procedures, so as to be run on a computer network composed of a number of workstations. Several implementation results attained for five-layer SOG are also shown to reveal the practicability of the system.

An optical On-Off Keyed (OOK) pulse is often stretched in dispersive channels, thus producing intersymbol interference (ISI) and degrading the performance. In this paper, error probability is presented for a convolutionally encoded optical OOK channels with ISI. Both ISI-matched and ISI-mismatched decoders are taken into account in the error probability analysis. The encoded optical OOK signal is received by Avalanche Photo Diode (APD) and the number of APD output photo-electrons is counted for soft decision Viterbi decoding. Error probability is derived for a 3-bit and an ideal soft decision schemes in ISI-mismatched decoder and for an ideal soft decision scheme in ISI-matched decoder. Numerical results demonstrate the effects of mismatching or 3-bit soft decision scheme. Some computer simulations are carried out to confirm the validity of the analysis.

The research for rational quadratic Bézier curve and its applications for generating conics and curve-fitting have been reported in some papers. But rational cubic Bézier curves, for the complexity of computation of the weight parameters and the difficulty of the shape control, have very rarely been applied up to the present. In this letter, we proposed a new method to generate a rational cubic Bézier curve. For a given point S (assuming the curve pass it) and a given value of the intermediate variable t in the point, we can compute the weight parameters of the rational cubic Bézier curve according to the relation of the control polygon and the given point, and can generate the curve. Then we explained the relation among shape of curve, given point S and intermediate varisble t. As the samples of using the method, we showed the generation of the gear-shape curve, symmetrical curve and spindle-shape curve, etc.. Finally, we discuss the application of this method for curve-fitting.

This paper describes an automatic transistor model parameter generation technique for a circuit simulator which can take device geometry into account. An 'area factor' is used to generate model parameters for different transistor shapes; however, the conventional method could not reflect the actual geometry differences other than for the emitter area. This resulted in inaccurate model parameters and such parameters were not acceptable to accurately simulate circuits for RF ICs. The proposed technique uses actually measured parameters and process data for a reference transistor and generates the individual model parameters for different shape transistors. In this technique, the parasitic resistor values are calculated and fitted in place of directly extracting them from the measured data. This ensures a better estimate. The reference transistor is made sufficiently large to neglect measurement errors in generating the parasitic capacitors. Thus, the model parameters for a very small transistor can be generated accurately. The model generating procedure has been implemented as a pre-processor to SPICE. This technique enables a fast turn around for RF IC circuit design which uses various shape transistors.

This paper mainly concentrates on recent studies on land mobile propagation, considering new trends of the progress of digital and personal land mobile communications. High speed digital transmission for millimeter-wave indoor communication is of another current interest. Microcellular propagation in urban areas and indoor propagation are major research targets at present days. Multipath propagation characteristics such as delay-profiles becomes more and more important measuring items, and some signal processing methods like MUSIC method have been widely introduced to improve the time resolution against the limit of available radio bandwidth. Path-loss characteristics in mobile propagation are extended to the path-loss prediction and are going to be applied to cellular system design in connection with the design of directional base-station antennas. Another recent topic is an extension of target frequency bands for mobile propagation studies, which are spreading from VHP, UHF and SHF to EHF bands.

The inverted slot line (ISL) has been propoaed for millimeter-wave LiNbO3 optical modulator. It is simple in structure, and capable of achieving the perfect velocity matching between carrier and modulating waves. The excellent performance of the ISL optical modulator has been demonstrated at 100 GHz, and the extension into the 50 GHz range is being expected. This paper addresses the analysis of the ISL based on the spectral domain approach. The major results obtained here are the demonstration of the perfect velocity matching not only at 10 GHz but also at 50 GHz, and the characterization of the ISL in terms of effective refractive index, characteristic impedance, overlap integral factor and transmission loss. The depth of optical phase modulation is also estimated at 50 GHz to show a promising performance in the millimeter-wave frequency range. The effective refractive index and the characteristic impedance are found to be theoretically predictable, but the field profile, the overlap integral factor and the transmission loss are not necessarily in good agreement with measurements. As a result of analysis, it can be concluded that the Y-cut substrate is superior to the Z-cut substrate in the following respects: 1. Coupling with the surface wave mode hardly occurs near the operating frequency range. 2. The perfect velocity matching can be attained with a larger spacing between the electrode and the ground plane. 3. The transmission loss is smaller. 4. The field intensity and the voerlap integral factor do not seem to be much deteriorated in the actual ISL.

This paper describes design considerations for high frequency active BPFs up to 100 MHz. The major design issues for high frequency active filters are the excess phase shift in the integrators and high power consumption of the integrators. Typical bipolar transistor based transconductors such as the Gilbert gain cell and the linearized transconductor with two asymmetric emitter-coupled pairs have been analyzed and compared. It has been clarified that the power consumption of the linearized transconductor can be much smaller than that of the Gilbert gain cell because of its high transconductance to working current ratio while maintaining a signal to noise ratio of the same order. A simple high-speed fully differential linearized transconductor cell is proposed with emitter follower buffers and resistive loads for excess phase compensation. A novel gyrator based transformation for the LC ladder BPF has been introduced. This transformation has resulted in a structure with simple capacitor-coupled active resonators which exactly preserves the original transfer function. A fourth order 10.7 MHz BPF IC was designed using the proposed transconductors. It was fabricated and has demonstrated the usefulness of the proposed approach. In addition, an experimental 100 MHz second order BPF IC with Q=14 has been successfully implemented indicating the potential of the proposed approach.

This paper reviews the application of optical technologies to phased array antennas. The performance of the fibre transmission medium and of sources and detectors is reviewed, leading to simple expressions for transmission loss and noise performance. Both coherent and non-coherent beam forming techniques are considered. Future trends, including the use of optical amplifiers and coherent signal generation, will also be discussed.

A new method for interpolating boundary function values and first derivatives of a triangle is presented. This method has a relatively simple construction and involves no compatibility constraints. The polynomial precision set of the interpolation function constructed includes all the cubic polynomial and less. The testing results show that the surface produced by the proposed method is better than the ones by weighted combination schemes in both of the fairness and preciseness.

This paper describes a fiber-optic microcell radio system with a spectral delivery switch to meet traffic demands. Optical link performance is discussed from the view points of link loss and noise figure aimed at system design. The theoretical carrier-to-noise ratio (CNR) performance is shown as a function of the input electrical power of the laser and the received optical power. Improvement of dynamic range defined by both CNR and intermodulation distortion is proposed by using the frequency modulation (FM) technique. The experimental results using the proposed technique indicate that the performance is much better than that of conventional methods. Moreover, economical diversity planning delivery methods over fibers are presented. This strategy will provide more cost effective and flexible networks.

Several research institutions in Europe have developed set-ups for wide-band mobile radio communication measurements. The performance and evaluation has been coordinated in the framework of the cooperation in the field of scientific and technical research within the committees COST 207 COST 231. New parameters have been defined to improve the insight into performance limits of digital radio communication systems which are caused by propagation phenomena. The definitions of these new parameters are presented in the paper. Channel sounders developed in Norway, Denmark, the United Kingdom, Switzerland, France and Germany are described. They are based on considerably different technical principles for evaluation and recording of the measured results. A few results gained in European measurement campaigns are also presented.

Reactive gases such air pollution agents as H2S or SO2 usually corrode the electrical contact surfaces. Since corrosion products formed on the surface increase contact resistance, they harmfully degrades contact reliability. To prevent the corrosion of the surface, oil coating on it may be effective. The oil film acts basically as a barrier for reaction between the corrosive gas and the surface. For thin film coating, the corrosion inhibition can not be expected. However, effect of film thickness on the corrosion property has not been clarified. In the present study, in order to clarify the corrosion inhibition of the oil coating for the contacts, the stearic acid coating on Ag (silver) contact surface was studied from view-point of the relationship between the thickness of the coating film and the contact resistance. As results, the effect of the stearic acid coating on corrosion inhibition in the atmosphere contained with H2S 3 ppm was found. However, the corrosion of the surface coated with thin stearic acid film occurred at microscopically scattered thin patiches in the specific pattern of the film. Existing of the optimum thickness of the stearic acid coating which gives both minimum contact resistance and effective corrosion inhibition was found. In the intermediate film thickness, this optimum thickness was induced by the increased contact resistance due to corrosion of the thin film region and insulation property of the stearic acid in the thick film region. Moreovr,it was found that this optimum thickness was affected by corrosion time. At the early stage of corrosion, the optimum thickness was about 200 . However, the corrosion time becomes longer as 700 min, this optimum thickness changed to thick as 1000 . With this increase in the thickness, the contact resistance in the optimum thickness rised to high level. Furthermore, the contact resistance in the optimum thickness decreased with increase in the contact load. However, dependence of the contact load on the optimum thickness was not recognized under a certain corrosion time.

This paper theoretically evaluates the external electro-optic (EO) sampling of high-speed electrical signals using poled polymers as materials for a proximity electric-field sensor. Based on the derivation of the half-wave voltage and the analysis of a static electric field coupled to the polymeric media placed over IC interconnections, invasiveness, voltage sensitivity, and spatial resolution have been discussed. The polymeric sensors have shown to be used in contact with the IC interconnections with negligibly small invasiveness, thus making polymeric sensors provide higher sensitivity and spatial resolution than inorganic crystals such as GaAs and KD*P.

This paper analyzes the performance of the capacity controlled radio system under a frequency selective fading environment. This system controls the number of modulation levels according to the number of active subscribers. In the analysis, we consider the capacity controlled system either with or without adaptive equalizer. As the results of analysis, it is clarified that the system is superior to the conventional fixed capacity system, and can be considered as a good countermeasure for multi-path fading. And it is found that there exists a synergistic effect due to capacity controlling and adaptive equalizing.