This paper presents dual bands and dual polarization reflectarrays for 5G millimeter wave applications. The frequency bands of 28GHz and 39GHz are allocated for 5G to realize high speed data transmission. However, these high frequency bands create coverage holes in which no link between base station and receivers is possible. Reflectarray has gained attention for reducing the size and number of coverage holes. This paper proposes a unit cell with swastika and the patch structure to construct the dual bands reflectrray operating at 28GHz and 39GHz by supercell. This paper also presents the detailed design procedure of the dual-bands reflectarray by supercell. The reflectarray is experimentally validated by a bistatic radar cross section measurement system. The experimental results are compared with simulation and reflection angle agreement is observed.

In this paper, the spurious modes and quality-factor (Q) values of the one-port dual-mode AlN lamb-wave resonators at 500-1000 MHz were studied by theoretical analysis and experimental verification. Through finite element analysis, we found that optimizing the width of the lateral reflection boundary at both ends of the resonator to reach the quarter wavelength (λ/4), which can improve its spectral purity and shift its resonant frequency. The designed resonators were micro-fabricated by using lithography processes on a 6-inch wafer. The measured results show that the spurious mode can be converted and dissipated, splitting into several longitudinal modes by optimizing the width of the lateral reflection boundary, which are consistent well with the theoretical analysis. Similarly, optimizing the interdigital transducer (IDT) width and number of IDT fingers can also suppress the resonator's spurious modes. In addition, it is found that there is no significant difference in the Qs value for the two modes of the dual-mode resonator with the narrow anchor and full anchor. The acoustic wave leaked from the anchor into the substrate produces a small displacement, and the energy is limited in the resonator. Compared to the resonator with Au IDTs, the resonator with Al IDTs can achieve a higher Q value due to its lower thermo-elastic damping loss. The measured results show the optimized dual-mode lamb-wave resonator can obtain Qs value of 2946.3 and 2881.4 at 730.6 MHz and 859.5 MHz, Qp values of 632.5 and 1407.6, effective electromechanical coupling coefficient (k2eff) of 0.73% and 0.11% respectively, and has excellent spectral purity simultaneously.

In this paper, we propose an end-to-end two-branch feature attention network. The network is mainly used for single image dehazing. The network consists of two branches, we call it CAA-Net: 1) A U-NET network composed of different-level feature fusion based on attention (FEPA) structure and residual dense block (RDB). In order to make full use of all the hierarchical features of the image, we use RDB. RDB contains dense connected layers and local feature fusion with local residual learning. We also propose a structure which called FEPA.FEPA structure could retain the information of shallow layer and transfer it to the deep layer. FEPA is composed of serveral feature attention modules (FPA). FPA combines local residual learning with channel attention mechanism and pixel attention mechanism, and could extract features from different channels and image pixels. 2) A network composed of several different levels of FEPA structures. The network could make feature weights learn from FPA adaptively, and give more weight to important features. The final output result of CAA-Net is the combination of all branch prediction results. Experimental results show that the CAA-Net proposed by us surpasses the most advanced algorithms before for single image dehazing.

This paper presents a convex-analytic framework to learn sparse graphs from data. While our problem formulation is inspired by an extension of the graphical lasso using the so-called combinatorial graph Laplacian framework, a key difference is the use of a nonconvex alternative to the l1 norm to attain graphs with better interpretability. Specifically, we use the weakly-convex minimax concave penalty (the difference between the l1 norm and the Huber function) which is known to yield sparse solutions with lower estimation bias than l1 for regression problems. In our framework, the graph Laplacian is replaced in the optimization by a linear transform of the vector corresponding to its upper triangular part. Via a reformulation relying on Moreau's decomposition, we show that overall convexity is guaranteed by introducing a quadratic function to our cost function. The problem can be solved efficiently by the primal-dual splitting method, of which the admissible conditions for provable convergence are presented. Numerical examples show that the proposed method significantly outperforms the existing graph learning methods with reasonable computation time.

This brief paper proposes a dual-wideband filter consisting of a parallel-coupled stepped-impedance-resonator (SIR) and open-circuited stubs. Firstly, a notched UWB (ultra-wideband) bandpass filter (BPF) with steep skirt characteristics is theoretically designed. Then a bandstop filter(BSF) is implemented using an SIR and open stubs. By replacing the transmission line part of UWB filter with the BSF, a novel dual-wideband filter (DWBPF) is realized. As a design example, a DWBPF with two passbands, i.e. 3.4-4.8GHz and 7.25-10.25GHz, is designed to validate the design procedure. The designed filter exhibits steep skirt characteristics.

Domain knowledge is useful to improve the generalization performance of learning machines. Sign constraints are a handy representation to combine domain knowledge with learning machine. In this paper, we consider constraining the signs of the weight coefficients in learning the linear support vector machine, and develop an optimization algorithm for minimizing the empirical risk under the sign constraints. The algorithm is based on the Frank-Wolfe method that also converges sublinearly and possesses a clear termination criterion. We show that each iteration of the Frank-Wolfe also requires O(nd+d2) computational cost. Furthermore, we derive the explicit expression for the minimal iteration number to ensure an ε-accurate solution by analyzing the curvature of the objective function. Finally, we empirically demonstrate that the sign constraints are a promising technique when similarities to the training examples compose the feature vector.

Visual Question Answering (VQA) is multi-task research that requires simultaneous processing of vision and text. Recent research on the VQA models employ a co-attention mechanism to build a model between the context and the image. However, the features of questions and the modeling of the image region force irrelevant information to be calculated in the model, thus affecting the performance. This paper proposes a novel dual self-guided attention with sparse question networks (DSSQN) to address this issue. The aim is to avoid having irrelevant information calculated into the model when modeling the internal dependencies on both the question and image. Simultaneously, it overcomes the coarse interaction between sparse question features and image features. First, the sparse question self-attention (SQSA) unit in the encoder calculates the feature with the highest weight. From the self-attention learning of question words, the question features of larger weights are reserved. Secondly, sparse question features are utilized to guide the focus on image features to obtain fine-grained image features, and to also prevent irrelevant information from being calculated into the model. A dual self-guided attention (DSGA) unit is designed to improve modal interaction between questions and images. Third, the sparse question self-attention of the parameter δ is optimized to select these question-related object regions. Our experiments with VQA 2.0 benchmark datasets demonstrate that DSSQN outperforms the state-of-the-art methods. For example, the accuracy of our proposed model on the test-dev and test-std is 71.03% and 71.37%, respectively. In addition, we show through visualization results that our model can pay more attention to important features than other advanced models. At the same time, we also hope that it can promote the development of VQA in the field of artificial intelligence (AI).

It is known that quasi-cyclic (QC) codes over the finite field Fq correspond to certain Fq[x]-modules. A QC code C is specified by a generator polynomial matrix G whose rows generate C as an Fq[x]-module. The reversed code of C, denoted by R, is the code obtained by reversing all codewords of C while the dual code of C is denoted by C⊥. We call C reversible, self-orthogonal, and self-dual if R = C, C⊥ ⊇ C, and C⊥ = C, respectively. In this study, for a given C, we find an explicit formula for a generator polynomial matrix of R. A necessary and sufficient condition for C to be reversible is derived from this formula. In addition, we reveal the relations among C, R, and C⊥. Specifically, we give conditions on G corresponding to C⊥ ⊇ R, C⊥ ⊆ R, and C = R = C⊥. As an application, we employ these theoretical results to the construction of QC codes with best parameters. Computer search is used to show that there exist various binary reversible self-orthogonal QC codes that achieve the upper bounds on the minimum distance of linear codes.

We present a novel circularly polarized ring microstrip antenna and its design. The shorting pins discretely disposed on the inner edge of the ring microstrip antenna are introduced as a new degree of freedom for improving the resonance frequency control. The number and diameter of the shorting pins control the resonance frequency; the resonance frequency can be almost constant with respect to the inner/outer diameter ratio, which expands the use of the ring microstrip antenna. The dual-band antenna where the proposed antenna includes another ring microstrip antenna is designed and measured, and simulated results agree well with the measured one.

With the development of IoT devices and sensors, edge computing is leading towards new services like autonomous cars and smart cities. Low-latency data access is an essential requirement for such services, and a large-capacity cache server is needed on the edge side. However, it is not realistic to build a large capacity cache server using only DRAM because DRAM is expensive and consumes substantially large power. A hybrid main memory system is promising to address this issue, in which main memory consists of DRAM and non-volatile memory. It achieves a large capacity of main memory within the power supply capabilities of current servers. In this paper, we propose Fogcached, that is, the extension of a widely-used KVS (Key-Value Store) server program (i.e., Memcached) to exploit both DRAM and non-volatile main memory (NVMM). We used Intel Optane DCPM as NVMM for its prototype. Fogcached implements a Dual-LRU (Least Recently Used) mechanism that seamlessly extends the memory management of Memcached to hybrid main memory. Fogcached reuses the segmented LRU of Memcached to manage cached objects in DRAM, adds another segmented LRU for those in DCPM and bridges the LRUs by a mechanism to automatically replace cached objects between DRAM and DCPM. Cached objects are autonomously moved between the two memory devices according to their access frequencies. Through experiments, we confirmed that Fogcached improved the peak value of a latency distribution by about 40% compared to Memcached.

The multi-category support vector machine (MC-SVM) is one of the most popular machine learning algorithms. There are numerous MC-SVM variants, although different optimization algorithms were developed for diverse learning machines. In this study, we developed a new optimization algorithm that can be applied to several MC-SVM variants. The algorithm is based on the Frank-Wolfe framework that requires two subproblems, direction-finding and line search, in each iteration. The contribution of this study is the discovery that both subproblems have a closed form solution if the Frank-Wolfe framework is applied to the dual problem. Additionally, the closed form solutions on both the direction-finding and line search exist even for the Moreau envelopes of the loss functions. We used several large datasets to demonstrate that the proposed optimization algorithm rapidly converges and thereby improves the pattern recognition performance.

We propose a new framework for estimating depth information from a single image. Our framework is relatively small and straightforward by employing a two-stage architecture: a residual network and a simple decoder network. Our residual network in this paper is a remodeled of the original ResNet-50 architecture, which consists of only thirty-eight convolution layers in the residual block following by pair of two up-sampling and layers. While the simple decoder network, stack of five convolution layers, accepts the initial depth to be refined as the final output depth. During training, we monitor the loss behavior and adjust the learning rate hyperparameter in order to improve the performance. Furthermore, instead of using a single common pixel-wise loss, we also compute loss based on gradient-direction, and their structure similarity. This setting in our network can significantly reduce the number of network parameters, and simultaneously get a more accurate image depth map. The performance of our approach has been evaluated by conducting both quantitative and qualitative comparisons with several prior related methods on the publicly NYU and KITTI datasets.

Siamese visual tracking, viewed as a problem of max-similarity matching to the target template, has absorbed increasing attention in computer vision. However, it is a challenge for current Siamese trackers that the demands of balance between accuracy in real-time tracking and robustness in long-time tracking are hard to meet. This work proposes a new Siamese based tracker with a dual-pipeline correlated fusion network (named as ADF-SiamRPN), which consists of one initial template for robust correlation, and the other transient template with the ability of adaptive feature optimal selection for accurate correlation. By the promotion from the learnable correlation-response fusion network afterwards, we are in pursuit of the synthetical improvement of tracking performance. To compare the performance of ADF-SiamRPN with state-of-the-art trackers, we conduct lots of experiments on benchmarks like OTB100, UAV123, VOT2016, VOT2018, GOT-10k, LaSOT and TrackingNet. The experimental results of tracking demonstrate that ADF-SiamRPN outperforms all the compared trackers and achieves the best balance between accuracy and robustness.

Permutation polynomials and their compositional inverses are crucial for construction of Maiorana-McFarland bent functions and their dual functions, which have the optimal nonlinearity for resisting against the linear attack on block ciphers and on stream ciphers. In this letter, we give the explicit compositional inverse of the permutation binomial $f(z)=z^{2^{r}+2}+alpha zinmathbb{F}_{2^{2r}}[z]$. Based on that, we obtain the dual of monomial bent function $f(x)={ m Tr}_1^{4r}(x^{2^{2r}+2^{r+1}+1})$. Our result suggests that the dual of f is not a monomial any more, and it is not always EA-equivalent to f.

Exploring the structural information as prior to facial images is a key issue of face super-resolution (SR). Although deep convolutional neural networks (CNNs) own powerful representation ability, how to accurately use facial structural information remains challenges. In this paper, we proposed a new residual fusion network to utilize the multi-scale structural information for face SR. Different from the existing methods of increasing network depth, the bottleneck attention module is introduced to extract fine facial structural features by exploring correlation from feature maps. Finally, hierarchical scales of structural information is fused for generating a high-resolution (HR) facial image. Experimental results show the proposed network outperforms some existing state-of-the-art CNNs based face SR algorithms.

Traffic categorization aims to classify network traffic into major service types. A modern deep neural network based on temporal sequence modeling is proposed for encrypted traffic categorization. The contemporary techniques such as dilated convolution and residual connection are adopted as the basic building block. The raw traffic files are pre-processed to generate 1-dimensional flow byte sequences and are feed into our specially-devised network. The proposed approach outperforms other existing methods greatly on a public traffic dataset.

Coherent transceivers are now regarded as promising candidates for upgrading the current 400Gigabit Ethernet (400GbE) transceivers to 800G. However, due to the complicated structure of a dual-polarization IQ modulator (DP-IQM) with its bulky polarization-beam splitter/comber (PBS/PBC), the increase in the transmitter size and cost is inevitable. In this paper, we propose a compact PBS/PBC-free transmitter structure with a straight-line configuration. By using the concept of polarization differential modulation, the proposed transmitter is capable of generating a DP phase-shift-keyed (DP-PSK) signal, which makes it directly applicable to the current coherent systems. A detailed analysis of the system performance reveals that the imperfect equalization and the bandwidth limitation at the receiver are the dominant penalty factors. Although such a penalty is usually unacceptable in long-haul applications, the proposed transmitter can be attractive due to its significant simplicity and compactness for short-reach applications, where the cost and the footprint are the primary concerns.

Encrypted traffic identification is to predict traffic types of encrypted traffic. A deep residual convolution network is proposed for this task. The Softmax classifier is fused with its angular variant, which sets an angular margin to achieve better discrimination. The proposed method improves representation learning and reaches excellent results on the public dataset.

This paper proposes a dual linear-polarized open-ended waveguide subarray designed for use in phased array antennas. The proposed subarray is a one-dimensional linear array that consists of open-ended waveguide antenna elements and suspended stripline feed networks to realize vertical and horizontal polarizations. The antenna includes a novel suspended stripline-to-waveguide transition that combines double- and quad-ridge waveguides to minimize the size of the transition and enhance the port isolation. Metal posts are installed on the waveguide apertures to eliminate scan-blindness. Prototype subarrays are fabricated and tested in an array of 16 subarrays. The experimental tests and numerical simulations indicate that the prototype subarray offers a low reflection coefficient of less than -11.4dB, low cross-polarization of less than -26dB, and antenna efficiency above 69% in the frequency bandwidth of 14%.

Image deformations caused by different steganographic methods are typically extremely small and highly similar, which makes their detection and identification to be a difficult task. Although recent steganalytic methods using deep learning have achieved high accuracy, they have been made to detect stego images to which specific steganographic methods have been applied. In this letter, a staganalytic method is proposed that uses hierarchical residual neural networks (ResNet), allowing detection (i.e. classification between stego and cover images) and identification of four spatial steganographic methods (i.e. LSB, PVD, WOW and S-UNIWARD). Experimental results show that using hierarchical ResNets achieves a classification rate of 79.71% in quinary classification, which is approximately 23% higher compared to using a plain convolutional neural network (CNN).