Designing a software architecture that satisfies multiple quality requirements is a difficult undertaking. This is mainly due to the fact that architects must be able to explore a broad range of architectural choices and analyze tradeoffs among them in light of multiple quality requirements. As the size and complexity of the system increase, architectural design space to be explored and analyzed becomes more complex. In order to systematically manage the complexity, this paper proposes a method that guides architects to explore and analyze architectural decisions in a top-down manner. In the method, architectural decisions that have global impacts on given quality requirements are first explored and analyzed and those that have local impacts are then taken into account in the context of the decisions made in the previous step. This approach can cope with the complexity of large-scale architectural design systematically, as architectural decisions are analyzed and made following the abstraction hierarchy of quality requirements. To illustrate the concepts and applicability of the proposed method, we have applied this method to the architectural design of the computer used for the continuous casting process by an iron and steel manufacturer.

There are three well-known approaches to using scan design to apply two-pattern testing: broadside testing (functional justification), skewed-load testing and enhanced scan testing. The broadside and skewed-load testing use the standard scan design, and thus the area overheads are not high. However fault coverage is low. The enhanced scan testing uses the enhanced scan design. The design uses extra latches, and allows scan-in any two-pattern testing. While this method achieves high fault coverage, it causes high area overhead because of extra latches. This paper presents a new scan design where two-pattern testing with high fault coverage can be performed with area overhead as low as the standard scan design. The proposed scan-FFs are based on master-slave FFs. The input of each scan-FF is connected to the output of the master latch and not the slave latch of the previous FF. Every scan-FF maintains the output value during scan-shift operations.

Design of portable battery operated multimedia devices requires energy-efficient multiplication circuits. This paper proposes a novel architectural technique to reduce power consumption of digital multipliers. Unlike related approaches which focus on multiplier transition activity reduction, we concentrate on dynamic reduction of supply voltage. Two implementation schemes capable of dynamically adjusting a double voltage supply to input data variation are presented. Simulations show that using these schemes we can reduce energy consumption of 1616-bit multiplier by 34% and 29% on peak and by 10% and 7% on average with area overhead of 15% and 4%, respectively, while maintaining the performance of traditional multiplier.

The Reed-Solomon code is a versatile channel code pervasively used for communication and storage systems. The bit-serial Reed-Solomon encoder has a simple structure, although it is somewhat difficult to understand the algorithm without considerable theoretical background. Some professionals and students, not able to understand the algorithm thoroughly, might need to implement the bit-serial encoder for themselves. In this letter, a step-by-step method is presented for the implementation of the bit-serial encoder even without understanding the internal algorithm, which would be helpful for VHDL, DSP, and simulation programming.

An energy-efficient power-aware design is highly desirable for DSP functions that encounter a wide diversity of operating scenarios in battery-powered wireless sensor network systems. Addressing this issue, this letter presents a low-power power-aware scalable pipelined Booth multiplier that makes use of dynamic-range detection unit, sharing common functional units, ensemble of optimized Wallace-trees and a 4-bit array-based adder-tree for DSP applications.

A novel digital redesign methodology based on evolutionary programming (EP) is introduced to find the 'best' digital controller for optimal tracking design of hybrid uncertain multi-input/ multi-output (MIMO) input-delay systems with constraints on states and controls. To deal with these multivariable concurrent specifications and system restrictions, instead of conventional interval methods, the proposed global optimization scheme is able to practically implement optimal digital controller for constrained uncertain hybrid systems with input time delay. Further, an illustrative example is included to demonstrate the efficiency of the proposed method.

The most obvious architectural solution for high-speed fuzzy inference is to exploit temporal parallelism and spatial parallelism inherited in a fuzzy inference execution. However, in fact, the active rules in each fuzzy inference execution are often only a small part of the total rules. In this paper, we present a new architecture that uses less hardware resources by discarding non-active rules in the earlier pipeline stage. Compared with previous work, implementation data show that the proposed architecture achieves very good results in terms of the inference speed and the chip area.

The present paper discusses a new construction of UWB pulses within the framework of soft-spectrum adaptation. The employed basis functions are B-splines having the following properties: (i) The B-splines are time-limited piecewise polynomials. (ii) The first-order B-splines are rectangular pulses and they converge band-limited functions at the limit that their order tends to infinity. (iii) There are an analog circuit and a fast digital filter for the generation of B-splines. Simple application of Gram-Schmidt orthonormalization process to the shifted B-splines results in a few basic pulses, which are well time-limited and have a broad band width, but do not comply with the FCC spectral mask. A constrained approximation technique is proposed for adaptively designing pulses so that they approximate target frequency characteristics. At the cost of using eleven shifted B-splines, an example set of four pulses comforting the FCC spectral mask is obtained.

Connection of internal scan chains in core wrapper design (CWD) is necessary to handle the width match of TAM and internal scan chains. However, conventional serial connection of internal scan chains incurs power and time penalty. Study shows that the distribution and high density of don't care bits (X-bits) in test patterns make scan slices overlapping and partial overlapping possible. A novel parallel CWD (pCWD) approach is presented in this paper for lowering test power by shortening wrapper scan chains and adjusting test patterns. In order to achieve shift time reduction from overlapping in pCWD, a two-phase process on test pattern: partition and fill, is presented. Experimental results on d695 of ITC2002 benchmark demonstrated the shift time and test power have been decreased by 1.5 and 15 times, respectively. In addition, the proposed pCWD can be used as a stand-alone time reduction technique, which has better performance than previous techniques.

This paper describes a design of Ogg Vorbis decoder for embedded platform. Since Ogg Vorbis decoding process incurs high computational complexity, a trivial software-based implementation requires high operation frequency. Thus in our design specific hardware modules are devised for functional blocks, which have higher computational complexity than other blocks in Ogg Vorbis decoding process. Based on computational cost analysis of whole decoding process, IMDCT (Inverse Modified Discrete Cosine Transform) and residue decoding process are detected as the computation-intensive functional blocks. As a result of hardware implementation, 73% improvement in CPU load is achieved by specific hardware modules for IMDCT and residue decoding process.

TCP performance in the IEEE 802.11-based multihop ad hoc networks is extremely poor, because the congestion control mechanism of TCP cannot effectively deal with the problem of packet drops caused by mobility and shared channel contention among wireless nodes. In this paper, we present a cross-layer method, which adaptively adjusts the TCP maximum window size according to the number of RTS (Request To Send) retry counts of the MAC layer at the TCP sender, to control the number of TCP packets in the network and thus decrease the channel contention. Our simulation results show that this method can remarkably improve TCP throughput and its stability.

This paper proposes two power-constrained test synthesis schemes and scheduling algorithms, under non-scan BIST, for RTL data paths. The first scheme uses boundary non-scan BIST, and can achieve low hardware overheads. The second scheme uses generic non-scan BIST, and can offer some tradeoffs between hardware overhead, test application time and power dissipation. A designer can easily select an appropriate design parameter based on the desired tradeoff. Experimental results confirm the good performance and practicality of our new approaches.

A millimeter wave BPF constructed from the WG mode dielectric disk resonators is presented. The design chart for the high Q WG mode resonator is obtained from Qu calculation of some WG modes. By using the design chart, high Q WG mode resonator having no influence of unwanted higher order resonances is designed. Designed resonators have different diameter and various Resonance Frequency Separation respectively. A 3 stage maximally flat BPF is constructed so that each resonator may be coupled laterally on the edge of the disk. Designed center frequency is 62.47 GHz and 3 dB bandwidth is 100 MHz. As a result, this BPF has insertion loss of 1.5 dB and some spurious responses which were existed conventional WG mode BPF are reduced considerably.

A complete system for the implementation of digital logic in a Field-Programmable Gate Array (FPGA) platform is introduced. The novel power-efficient FPGA architecture was designed and simulated in STM 0.18 µm CMOS technology. The detailed design and circuit characteristics of the Configurable Logic Block, the interconnection network, the switch box and the connection box were determined and evaluated in terms of energy, delay and area. A number of circuit-level low-power techniques were employed because power consumption was the primary concern. Additionally, a complete tool framework for the implementation of digital logic circuits in FPGA platforms is introduced. Having as input VHDL description of an application, the framework derives the reconfiguration bitstream of FPGA. The framework consists of: i) non-modified academic tools, ii) modified academic tools and iii) new tools. Furthermore, the framework can support a variety of FPGA architectures. Qualitative and quantitative comparisons with existing academic and commercial architectures and tools are provided, yielding promising results.

This paper proposes a novel boundary scan test scheme for intellectual property (IP) core identification via watermarking. The core concept is embedding a watermark identification circuit (WIC) and a test circuit into the IP core at the behavior design level. The procedure depends on current IP-based design flow. This scheme can detect the identification of the IP provider without the need to examine the microphotograph after the chip has been manufactured and packaged. This scheme can successfully survive synthesis, placement, and routing and identify the IP core at various design levels. Experimental results have demonstrated that the proposed approach has the potential to solve the IP identification problem.

This paper presents a novel low-power register file based on adiabatic logic. The register file consists of a storage-cell array, address decoders, read/write control circuits, sense amplifiers, and read/write drivers. The storage-cell array is based on the conventional memory cell. All the circuits except the storage-cell array employ CPAL (complementary pass-transistor adiabatic logic) to recover the charge of large node capacitance on address decoders, bit-lines and word-lines in fully adiabatic manner. The minimization of energy consumption was investigated by choosing the optimal size of CPAL circuits for large load capacitance. The power consumption of the proposed adiabatic register file is significantly reduced because the energy transferred to the large capacitance buses is mostly recovered. The energy and functional simulations are performed using the net-list extracted from the layout. HSPICE simulation results indicate that the proposed register file attains energy savings of 65% to 85% as compared to the conventional CMOS implementation for clock rates ranging from 25 to 200 MHz.

A speaker identification system based on wavelet transform (WT) derived from codebook design using fuzzy c-mean algorithm (FCM) is proposed. We have combined FCM and the vector quantization (VQ) algorithm to avoid typical local minima for speaker data compression. Identification accuracies of 94% were achieved for 100 Mandarin speakers.

The conditional sum adder (CSA) has been shown to outperform other adders applied in high-speed applications. This investigation proposes a modified CSA called the conditional carry adder (CCA). Based on the proposed adder architecture, six 64-bit hybrid dual-threshold CCAs for power-aware applications were discussed. Architectural modification of the CCA raises the operation speed, decreases the power dissipation, and lowers the hardware overhead. The proposed 64-bit CCA can decrease the number of multiplexers and internal nodes in the adder design by around 27% compared to the 64-bit CSA. Furthermore, components on critical paths use a low threshold voltage to accelerate the speed of operation, and other components use the normal threshold voltage to save power. This feature is very useful in implementing power-aware arithmetic systems. One of the proposed circuits has the lowest power-delay product and energy-delay product. The hybrid circuit represents a fine compromise between power and performance. Its power efficiency is better than that of the single threshold voltage circuit designs.

We have launched "Highly-Reliable Embedded Software Development" Project, held as a part of e-Society Project, supported by Ministry of Education, Culture, Sports, Science and Technology (MEXT), Japan. The aim of this project is to enable the industry to produce highly reliable and advanced software by introducing latest software technologies into embedded software development. In this paper, we introduce the overview of the projects and our activities and results so far.

This paper describes a high-speed D/A converter design for mixed-mode systems. Capacitive coupling induced by inter-chip interconnects and time-variant clock skew between ICs should be considered for mixed-mode systems, and on-chip interconnects should be treated as transmission lines in the circuit simulation as operating speed reaches GHz range. A robust FIFO built in the D/A converter can absorb input data timing variance due to the capacitive coupling and the clock timing skew, the worst-case margin of which is 1.5TCLK. Distributed RLC transmission line models for on-chip interconnects produce accurate simulation results at 1 GHz clock frequency over lumped models. For optimized D/A converter design, behavioral modeling methodology is also presented in this paper. Measurement results verify the accuracy of the on-chip interconnect and behavioral models.