Robustness is one of the significant properties in wireless sensor networks because sensor nodes and wireless links are subjected to frequent failures. Once these failures occur, system performance falls into critical condition due to increases in traffic and losses of connectivity and reachability. Most of the existing studies on sensor networks, however, do not conduct quantitative evaluation on robustness and do not discuss what brings in robustness. In this paper, we define and evaluate robustness of wireless sensor networks and show how to improve them. By computer simulation, we show that receiver-initiated MAC protocols are more robust than sender-initiated ones and a simple detour-routing algorithm has more than tripled robustness than the simple minimum-hop routing algorithm.

Arc discharge generated by breaking electrical contact is considered as a main source of not only degradation of the electrical property but also an undesired electromagnetic (EM) noise. In order to clarify the effect of heated temperature on the bridge, arc-duration and the fluctuation of voltage, opening-waveforms at slowly separating silver-tin dioxide contact with holder heating are measured and discussed experimentally in this paper. Firstly, opening-waveforms are measured. Secondly, voltage fluctuation of the each arc-phase is discussed to extract the effect of the heated holder. The relationship between temperature of the heated holder and duration and fluctuation of the arc was investigated experimentally. It was revealed that as the initial temperature of the heated holder becomes higher, arc-duration becomes slightly longer. In addition, voltage fluctuation at the gaseous-phase decreases when the holder is heated. Consequently, the heated holder can suppress the voltage fluctuation even if its duration becomes slightly longer.

In this paper, we propose a novel gait recognition framework - Spherical Space Model with Human Point Clouds (SSM-HPC) to recognize front view of human gait. A new gait representation - Marching in Place (MIP) gait is also introduced which preserves the spatiotemporal characteristics of individual gait manner. In comparison with the previous studies on gait recognition which usually use human silhouette images from image sequences, this research applies three dimensional (3D) point clouds data of human body obtained from stereo camera. The proposed framework exhibits gait recognition rates superior to those of other gait recognition methods.

This paper proposes a method for reconstructing a smooth and accurate 3D surface. Recent machine vision techniques can reconstruct accurate 3D points and normals of an object. The reconstructed point cloud is used for generating its 3D surface by surface reconstruction. The more accurate the point cloud, the more correct the surface becomes. For improving the surface, how to integrate the advantages of existing techniques for point reconstruction is proposed. Specifically, robust and dense reconstruction with Shape-from-Silhouettes (SfS) and accurate stereo reconstruction are integrated. Unlike gradual shape shrinking by space carving, our method obtains 3D points by SfS and stereo independently and accepts the correct points reconstructed. Experimental results show the improvement by our method.

Cubic TCP, one of transport protocols designed for high bandwidth-delay product (BDP) networks, has successfully been deployed in the Internet. Multi-homed computers with multiple interfaces to access the Internet via high speed links will become more popular. In this work, we introduce an extended version of Cubic TCP for multiple paths, called MPCubic. The extension process is approached from an analysis model of Cubic by using coordinated congestion control between paths. MPCubic can spread its traffic across paths in load-balancing manner, while preserving fair sharing with regular TCP, Cubic, and MPTCP at common bottlenecks. Moreover, to improve resilience to link failure, we propose a multipath fast recovery algorithm. The algorithm can significantly reduce the recovery time of data rate after restoration of failed links. These techniques can be useful for resilient high-bandwidth applications (for example, tele-health conference) in disaster-affected areas. Our simulation results show that MPCubic can achieve stability, throughput improvement, fairness, load-balancing, and quick data rate recovery from link failure under a variety of network conditions.

To improve the observability during the post-silicon validation, it is the key to select the limited trace signals effectively for the data acquisition. This paper proposes an automated trace signal selection algorithm, which uses the pruning-based strategy to reduce the exploration space. First, the restoration range is covered for each candidate signals. Second, the constraints are generated based on the conjunctive normal form (CNF) to avoid the conflict. Finally the candidates are selected through pruning-based enumeration. The experimental results indicate that the proposed algorithm can bring higher restoration ratios and is more effective compared to existing methods.

This paper presents an inertial estimator learning automata scheme by which both the short-term and long-term perspectives of the environment can be incorporated in the stochastic estimator – the long term information crystallized in terms of the running reward-probability estimates, and the short term information used by considering whether the most recent response was a reward or a penalty. Thus, when the short-term perspective is considered, the stochastic estimator becomes pertinent in the context of the estimator algorithms. The proposed automata employ an inertial weight estimator as the short-term perspective to achieve a rapid and accurate convergence when operating in stationary random environments. According to the proposed inertial estimator scheme, the estimates of the reward probabilities of actions are affected by the last response from environment. In this way, actions that have gotten the positive response from environment in the short time, have the opportunity to be estimated as “optimal”, to increase their choice probability and consequently, to be selected. The estimates become more reliable and consequently, the automaton rapidly and accurately converges to the optimal action. The asymptotic behavior of the proposed scheme is analyzed and it is proved to be ε-optimal in every stationary random environment. Extensive simulation results indicate that the proposed algorithm converges faster than the traditional stochastic-estimator-based S ERI scheme, and the deterministic-estimator-based DGPA and DPRI schemes when operating in stationary random environments.

Efficient silicon-based light sources are expected to be key devices for applications such as optical interconnection. Huge number of researches has been conducted for realizing silicon-based light sources. Most of them utilized silicon-related materials such as silicon nanostructures or germanium, not crystalline silicon, which has been considered as a poor light emitter because of its indirect electronic bandgap. Light emission properties of materials can be tailored not only by modifying the material properties directly, but also by controlling the electromagnetic environment surrounding the material. Photonic nanostructures are a powerful tool for creating the engineered environment. In this paper, we briefly review the mechanisms for improving the light emission properties of materials by photonic nanostructures and present our recent experimental results showing the enhancement of light emission from silicon by introducing photonic crystal structures.

Monolithic integration of various kinds of optical components on a silicon wafer is the key to making silicon (Si) photonics practical technology. Applying silicon photonics to telecommunications further requires low insertion loss and polarization independence. We propose an integration concept for telecommunications based on Si and related materials and demonstrate monolithic integration of passive and dynamic functional components. This article shows the great potential of Si photonics technology for telecommunications.

We demonstrate phase demodulation of 10-Gbps DPSK signals using a silicon micro-ring resonator with a radius of 10 µm and with various coupling gaps for light of ∼1550 nm in wavelength. Influence of the Q factors and transmissions of the resonators on the response speed and power balance of the two output ports is discussed. Furthermore, temperature sensitivity on resonance peak was measured and we discuss its effect on practical demodulation application.

Based on Tu-Deng's conjecture and the Tu-Deng function, in 2010, X. Tang et al. proposed a class of Boolean functions in even variables with optimal algebraic degree, very high nonlinearity and optimal algebraic immunity. In this corresponding, we consider the concatenation of Tang's function and another Boolean function, and study its cryptographic properties. With this idea, we propose a class of 1-resilient Boolean functions in odd variables with optimal algebraic degree, good nonlinearity and suboptimal algebraic immunity based on Tu-Deng's conjecture.

In heterogeneous cellular networks (HCN), which consists of macrocells and picocells, efficient interference management schemes between macrocells and picocells are crucial to the overall system performance. We propose a dynamic cooperative silencing (DCS) scheme for intercell interference control (ICIC). It is a low-complexity, low-feedback and distributed algorithm using only strongly interfered neighboring user information. A system simulation shows that the system performance and in particular the cell-edge throughput is significantly increased with the proposed silencing scheme.

This paper presents an interconnect resilient (IR) methodology with maximal interconnect fault tolerance, yield, and reliability for both single and multiple interconnect faults under stuck-at and open fault models. By exploiting multiple routes inherent in an interconnect structure, this method can tolerate faulty connections by efficiently finding alternative paths. The proposed approach is compatible with previous interconnect detection and diagnosis methods under oscillation ring schemes, and together they can be applied to implement a robust interconnect structure that may still provide correct communication even under multiple link faults in Network-on-Chips (NoCs). With such knowledge, designers can significantly improve interconnect reliability by augmenting vulnerable interconnect structures in NoCs. As a result, the experimental results show that alternative paths in NoCs can be found for almost all paths. Hence, the proposed method provides a good way to achieve fault tolerance and reliability/yield improvement.

Polymer multimode optical waveguides were fabricated from optically-sensitive hybrid silicone using the ultraviolet laser drawing method. The waveguide loss values were measured as 0.069 dB/cm with a laser diode, 0.069 dB/cm with a vertical-cavity surface-emitting laser, and 0.128 dB/cm with a light-emitting diode. The cross waveguide on a curved waveguide was drawn by overlapped direct laser drawing. The crosstalk and excess loss at the cross angle of 50 in the cross waveguide were measured as 47 dB and 0.5 dB, respectively.

This report describes a crystallization method we developed for amorphous (a)-Si film by using 405-nm laser diodes (LDs). The proposed method has been used to fabricate bottom gate (BG) microcrystalline (µc)-Si TFTs for the first time. A µc-Si film with high crystallinity was produced and high-performance BG µc-Si TFTs with a field effect mobility of 3.6 cm2/Vs and a current on/off ratio exceeding 108 were successfully demonstrated. To determine the advantages of a 405-nm wavelength, a heat flow simulation was performed with full consideration of light interference effects. Among commercially available solid-state lasers and LDs with wavelengths having relatively high optical absorption coefficients for a-Si, three (405, 445, and 532 nm) were used in the simulation for comparison. Results demonstrated that wavelength is a crucial factor for the uniformity, efficiency, and process margin in a-Si crystallization for BG µc-Si TFTs. The 405-nm wavelength had the best simulation results. In addition, the maximum temperature profile on the gate electrode through the simulation well explained the actual crystallinity distributions of the µc-Si films.

Well-crystallized Ba2SiO4:Eu2+ powders were grown on a substrate by the vapor phase reaction between a mixed powder (barium carbonate and europium oxide) and SiO gas. The vaporization of SiO occurs at 1400–1600 from the SiO2 source (or SiO powder) in a reducing atmosphere. The formed SiO gas was transported by 95 vol% Ar - 5 vol% H2 gas and reacted with the raw material powders. The emission intensity of the Ba2SiO4:Eu2 + phosphor synthesized by the new vapor phase technique is about 2.6 times higher than that of a conventional solid-state reaction sample.

Using a self-developed ASTM test system of contact material electrical properties under low voltage (LV), small-capacity, the current-frequency variable and a photoelectric analytical balance, the electric performance comparison experiments and material weighing of silver-based electrical contact materials, such as silver/tungsten and silver/cadmium oxide contact materials, are completed under LV, pure resistive load and small current at 400 Hz/50 Hz. The surface profiles and constituents of silver/tungsten contact material were observed and analyzed by SEM and EDAX. Researches indicate that the form of the contact material arc burnout at 400 Hz is stasis, not an eddy flow style at 50 Hz; meanwhile, the area of the contact burnout at 400 Hz is less than that of 50 Hz, and the local ablation on the surface layer at 400 Hz is more serious. Comparing the capacities of the silver-based contact materials with different second element such as CAgW50, CAgNi10, CAgC4 and CAgCdO15 at 400 Hz, no matter what the performances of arc erosion resistance or welding resistance, it can be found that the capacities of the silver/tungsten material is the best.

In this paper, we propose an error resilience scheme for wireless video coding based on adaptive flexible macroblock ordering (FMO) and intra refresh. An FMO explicit map is generated frame-by-frame by using prior information. This information involves estimated locations of guard and burst sections in the channel and estimated effect of error propagation (EEP) from the previous frame to the current frame. In addition, the role of the current frame in propagating an error to the next frame is also considered. A suitable intra refresh rate which is adaptive to the channel state is used to reduce the dependence between frames and thus can stop the EEP. The results in experiments show that the proposed method gains some improvements in terms of peak signal-to-noise rate (PSNR) as compared with some other methods that have not considered the channel condition and the error propagation in generating an FMO map.

Post-silicon debugging is getting even more critical to shorten the time-to-market than ever, as many more bugs escape pre-silicon verification according to the increasing design scale and complexity. Post-silicon debugging is generally harder than pre-silicon debugging due to the limited observability and controllability of internal signal values. Conventionally, simulation of corresponding low-level designs such as RTL or gate-level has been used to get observability and controllability, which is inefficient for contemporary large designs. In this paper, we introduce a post-silicon debugging approach using simulation of high-level designs, instead of low-level designs. To realize such a debugging approach, we propose an I/O sequence mapping method that converts I/O sequences of chip executions to those of the corresponding high-level design. First, we provide a formal definition of I/O sequence mapping and relevant notions. Then, based on the definition, we propose an I/O sequence mapping method by executing FSMs representing the interface specifications of the target design. Also, we propose an implementation of the proposed method to get further efficiency. We demonstrate that the proposed method can be effectively applied to several practical design examples with various interfaces.

Silicon Mach-Zehnder interferometric (MZI) waveguide modulator incorporating the n-channel junction field-effect transistor (JFET) as a signal modulation unit was designed, fabricated, and analyzed. The proposed MZI with JFET was designed to operate based on the plasma dispersion effect in the infrared wavelength of 1550 nm. The three different modulation lengths (ML) of 500, 1000, and 2000 µm while keeping the overall MZI length constant at 1.5 cm were set as a general design rule for these 10 µm-wide MZIs under study. When the JFET was operated in an active mode by injecting approximately 50 mA current (Is) to achieve a π phase shift, the modulation efficiency of the device was measured to be η = π /(Is· L) 40π/A-mm. The temporal and frequency response measurements also demonstrate that the respectively rise and fall times measured using a high-speed photoreceiver were in the neighborhood of 8.5 and 7.5 µsec and the 3 dB roll-off frequency (f3 dB) measured was in the excess of 400 kHz.