This paper analyses the amplification characteristics of a two-loop controlled switching power amplifier for a digital portable telephone and presents the amplifier which has a flat gain and small phase delay from dc to 100kHz. This amplifier is a modification of a switching regulator and it uses two-loop control to achieve a wideband amplification characteristic. Optimum amplification characteristics, however, can't be designed by using the conventional method for designing a switching regulator because a flat gain and small phase delay in an amplification characteristic has not been considered for most switching regulators. This paper analyses in detail the small-signal transfer functions of the switching power amplifier and shows the behaviour of zero and poles. It also shows the boundary condition of large-signal operation. A new design procedure of a switching power amplifier is presented, and the analytical results are verified by experiments.

Test pattern generation is getting much harder as the circuit size becomes larger. One problem is that it tends to take much time and another one is that it is difficult to detect redundant faults. Aiming to cope with these problem, an enhanced unique sensitization technique is proposed in this paper. This powerful global implication reduces the number of backtracks with reasonable computational time. And a fast test pattern generator featuring this unique sensitization demonstrates its performance using large benchmark circuits with over ten thousands of gates. It takes only a minute to detect all testable faults and to identify all redundant faults of 20,000 gates circuit on a workstation.

A new arithmetic multiple-valued algebra with functional completeness is introduced. The algebra is called Neuro-Algebra for it has very similar formula and architecture to neural networks. Two canonical forms of multiple-valued functions of this Neuro-Algebra are presented. Since the arithmetic operations of the Neuro-Aglebra are basically a weighted-sum and a piecewise linear operations, their implementations are very simple and straightforward. Furthermore, the multiple-valued networks based on the Neuro-Algebra can be trained by the traditional back-propagation learning algorithm directly.

Acceleration techniques have been incorporated into the generalized method of characteristics (GMC) to perform transient analysis of uniform transmission lines, for the special case when the transmission lines are driven by digital signals. These techinques have been proved to improve the simulation speed to a great extent when the analysis is carried out using iterative waveform relaxation method. It has been identified that the load impedance connected to the transmission line has a bearing on the efficiency of one of these acceleration techniques. Examples of an RLCG line terminated with linear loads as well as nonlinear loads are given to illustrate the advantage of incorporating these acceleration techniques.

This paper describes the hierarchical behavioral description language celled SFL and its processing system. This integrated CAD system called PARTHENON is used for designs of the leading ASICs in the NTT Systems Labs. This paper shows, therefore, the effectiveness of PARTHENON as a practical high-lelel synthesis system through real design experience. SFL was developed to aid in the design of the hardware functions and behaviors of ASICs composed solely of clocksynchronized circuits. The main features of SFL are as follows: (1) It is not mixed with connection description, but employs only behavioral description (like procedual description in program language), and it provides hierarchical expression of behavioral description. (2) It permits the description of parallel processing operations by adopting a new hardware task concept. And, (3) it is linked with the behavioral simulator, logic synthesizer, and other components of the processing system. After describing SFL in some detail, a brief explanation of its synthesizer and other processing components is provided, along with its application results in the real design of some leading ASICs at the NTT Systems Laboratories.

This paper summarizes basic system design for an optical fiber feeder for microcellular mobile communication systems. The optical feeder enables compact and low cost base stations, easy radio channel control and flexible mobile communication systems. Basic transmission characteristics are investigated through optical transmission experiments. By using these results, feeder performance is estimated and optimal system parameters are designed.

This paper reports performance improvement in an optical fiber feeder for microcellular mobile radio systems. A low noise optical receiver using a transformer resonant circuit is described. With this receiver, CNR degradation due to receiver noise is suppressed to less than 0.9dB. Furthermore, two novel techniques, the use of a multiple-LD transmitter and automatic LD input level control, are proposed. The multiple-LD transmitter increases transmitter output power and reduces the transmitter noise. With a dual-LD transmitter, it is possible to increase the optical loss margin by 3.1dB, which corresponds to transmission length expansion of 6.2km, or to improve the received CNR by 2.8dB, which enables communication range expansion. Automatic LD input level control, which optimizes LD input level according to the received radio power, can expand the actual dynamic range of the up link.

A quantum interconnection scheme by controlling the Coulomb interaction between ballistic electrons is proposed in which 2DEG (2 dimensional electron gas) plays the role of an interconnection medium. This concept brings up new possibilities for the interconnection approach in various fields such as parallel processing, telecommunications switching, and quantum functional devices. Cross-over interconnection, address collision, and address selection in a quantum information network system were analyzed as the first step. The obtained results have shown that the interconnection probability can be controlled by the velocity and timing of the ballistic electron emission from the emitter electrode. The proposed interconnection scheme is expected to open up a new field of quantum effect integrated circuits in the 21st century.

Fiber-optic microcellular system has been studied actively as an excellent system for solving the equipment cost problems in microcellular systems. However, the occurrence of intermodulation distortion (IMD) arising from the nonlinearity of the laser diode used for E/O conversion which degrades the transmission quality is a serious problem in this system. In this paper, we propose a new frequency switching/IM3 reduction method, which dynamically reassigns the carrier frequencies to minimize the carrier to IMD power ratio under the hostile environment with time-varying received carrier strength, and analyze the performance improvements by the proposed method. The improvements obtained both for the worst value of the overall CNR and for the overall CNR in a specific user are numerically made clear. It is also shown that if the interval between frequency reassignings is set less than one second, a sufficient improvement in the overall CNR is achievable.

This paper proposes new design methods for single b-bit (b2) byte error correcting and double bit error detecting code, called SbEC-DED code, suitable for high-speed memory systems using byte organized RAM chips. This new type of byte error control code is practical from the viewpoint of having less redundancy and stronger error control capability than the existing ones. A code design method using elements from a coset of subfield under addition gives the practical SbEC-DED code with 64 information bits and 4-bit byte length which has the same check-bit length, 12 bits, as that of the Hamming single byte error correcting code. This also has very high error detection capabilities of random double byte errors and of random triple bit errors.

In this paper, a construction of de Bruijn sequences using maximum length linear sequences is considered. The construction is based on the well-known cross-join (CJ) method: Maximum length linear sequences are used to produce de Bruijn sequences by the CJ process. Properties of the CJ paris in the maximum length linear sequences are investigated. It is conjectured that the number of CJ pairs in a maximum length linear sequence is given by (22n-3+1)/3-2n-2, where n2 is the length of the linear feedback shift register with the sequence. The CJ paris for some special cases are obtained. An algorithm for finding CJ pairs is described and a method of implementation is discussed briefly.

In this paper, a definitce relation between the TSP's optimal solution and the attracting region in the parameters space of TSP's energy function is discovered. An many attracting region relating to the global optimal solution for TSP is founded. Then a neural network algorithm with the optimized parameters by using Orthogonal Array Table Method is proposed and used to solve the Travelling Salesman Problem (TSP) for 30, 31 and 300 cities and Map-coloring Problem (MCP). These results are very satisfactory.

The Princeton University Behavioral Synthesis System (PUBSS) performs high-level synthesis on communicating processes. The compiler accepts models written in a subset of VHDL, but performs synthesis using a more specialized model, the behavior FSMs (BFSMs), for synthesis. The simulation semantics of VHDL presents challenges in describing behavior without overly constraining that behavior solely to make the simulation work. This paper describes mismatch between the simulation semantics provided by VHDL and the synthesis semantics required for high-level synthesis and describes how we solved these problems in PUBSS.

Most of actual environmental systems show a complicated fluctuation pattern of non-Gaussian type, owing to various kinds of factors. In the actual measurement, the fluctuation of random signal is usually contaminated by an external noise. Furthermore, it is very often that the reliable observation value can be obtained only within a definite fluctuating amplitude domain, because many of measuring equipments have their proper dynamic range and original random wave form is unreliable at the end of amplitude fluctuation. It becomes very important to establish a new signal detection method applicable to such an actual situation. This paper newly describes a dynamical state estimation algorithm for a successive observation contaminated by the external noise of an arbitrary distribution type, when the observation value is measured through a finite dynamic range of measurement. On the basis of the Bayes' theorem, this method is derived in the form of a wide sense digital filter, which is applicable to the non-Gaussian properties of the fluctuations, the actual observation in a finite amplitude domain and the existence of external noise. Differing from the well-known Kalman's filter and its improvement, the proposed state estimation method is newly derived especially by paying our attention to the statistical information on the observation value behind the saturation function instead of that on the resultant noisy observation. Finally, the proposed method is experimentally confirmed too by applying it to the actual problem for a reverberation time measurement from saturated noisy observations in room acoustics.

A new Viterbi algorithm with adaptive path reduction method is presented. The proposed system consists of the pre-decoder and reduced path Virerbi decoder. The predecoder separates the mixed channel noise from the received sequence. The number of errors in the pre-decoded error sequence is counted and the path reduction is implemented by the number of errors in pre-decoded error sequence. The path reduction is implemented as a function of channel condition because the errors in the pre-decoded error sequence can be considered as the channel error sequence. Due to the reduction of the path, the number of ACS (add compare select) operations can be reduced, which occupies the dominant part in Viterbi decoding. The ACS reduction ratio for the proposed system achieves up to 30% for the case of (2, 1, 2) Ungerboeck code without degradation of the error performance.

Asymptotic bounds are considered for unidirectional byte error-correcting codes. Upper bounds are developed from the concepts of the Singleton, Plotkin, and Hamming bounds. Lower bounds are also derived from a combination of the generalized concatenated code construction and the Varshamov-Gilbert bound. As the result, we find that there exist codes of low rate better than those on the basis of Hamming distance with respect to unidirectional byte error-correction.

We have developed a new HIGFET structure achieving an extremely high K-value of 13.3 S/Vcm with a gate length of 0.15 µm. Self-aligned ion implantation is excluded to suppress a short-channel effect. An i-GaAs cap layer and an n+-GaAs contact layer are employed to reduce source resistance. The threshold voltage shift is as small as 50 mV when the gate length is reduced from 1.5 µm to 0.15 µm. Source resistance is estimated to be 53 mΩcm. We have also developed a new fabrication process that can achieve a shorter gate length than the minimum size of lithography. This process utilizes an SiO2 sidewall formed on the n+-GaAs contact layer to reduce the gate length. A gate length of 0.15 µm can be achieved using 0.35 µm lithography.

This paper reviews fiber optic link techniques from the microwave and millimeter-wave transmission point of view. Several architectures of fiber optic links are reviewed. The application of MMIC technologies to the optical receivers are discussed and 26-GHz subcarrier transmission experimental works are described. Novel fiber optic links which utilize both optical device nonlinearities and microwave functional circuits are also reviewed. A system concept of millimeter-wave cellular radio using fiber optic links is finally discussed.

Fiber-optic passive double star (PDS) network is described as an access network for microcellular radio communication systems. The intrinsic characteristics of the PDS network, reduction in the optical fiber count and flexible access capability, are examined. A unit cell structure is introduced which enables the PDS network to be effectively incorporated into the access portion of microcellular radio communication systems. The reduced total fiber length in the unit cell structure based on the PDS network is discussed in comparison with the conventional architecture. Calculations show that there is an optimum splitting ratio that minimizes the total fiber length. When the microcell radius and service area radius are 100m and 10km, respectively, the total fiber length of the PDS network is reduced to only about 9% of that of the conventional single star (SS) network for a splitting ratio of 34. Resource sharing and handover between microcells in a unit cell are performed by using the dynamic channel allocation function of the PDS system. Substantial performance improvement for loaded traffic can be obtained by resource sharing. When the splitting ratio is 32, the available traffic of a base station (BS) increases from 0.9 [erl/BS] to 3.4 [erl/BS] by adopting dynamic channel allocation for the lost call probability of 0.01.

In this paper, we investigate various technology aspects in fiber-to-the-microcell systems. Background studies on radio propagation environment and system operations are provided first. The fundamental linearity characteristics of a directly and externally modulated optical links are analyzed next. An overall comparison between the two types of optical links, and system requirements among all types of wireless systems (from macrocells to picocells) are presented. Future research and development directions are also suggested.