This paper investigates the sum rate (SR) maximization problem for downlink cooperative non-orthogonal multiple access (C-NOMA) systems with hardware impairments (HIs). The source node communicates with users via a half-duplex amplified-and-forward (HD-AF) relay with HIs. First, we derive the SR expression of the systems under HIs. Then, SR maximization problem is formulated under maximum power of the source, relay, and the minimum rate constraint of each user. As the original SR maximization problem is a non-convex problem, it is difficult to find the optimal resource allocation directly by tractional convex optimization method. We use variable substitution method to convert the non-convex SR maximization problem to an equivalent convex optimization problem. Finally, a joint power and rate allocation based on interior point method is proposed to maximize the SR of the systems. Simulation results show that the algorithm can improve the SR of the C-NOMA compared with the cooperative orthogonal multiple access (C-OMA) scheme.

We investigate an interactive evolutionary computation (IEC) using multiple users' gaze information when users partially participate in each design evaluation. Many previous IEC systems have a problem that user evaluation loads are too large. Hence, we proposed to employ user gaze information for evaluating designs generated by IEC systems in order to solve this problem. In this proposed system, users just view the presented designs, not assess, then the system automatically creates users' favorite designs. With the user's gaze information, the proposed system generates coordination that can satisfy many users. In our previous study, we verified the effectiveness of the proposed system from a real system operation viewpoint. However, we did not consider the fluctuation of the users during a solution candidate evaluation. In the actual operation of the proposed system, users may change during the process due to the user interchange. Therefore, in this study, we verify the effectiveness of the proposed system when varying the users participating in each evaluation for each generation. In the experiment, we employ two types of situations as assumed in real environments. The first situation changes the number of users evaluating the designs for each generation. The second situation employs various users from the predefined population to evaluate the designs for each generation. From the experimental results in the first situation, we confirm that, despite the change in the number of users during the solution candidate evaluation, the proposed system can generate coordination to satisfy many users. Also, from the results in the second situation, we verify that the proposed system can also generate coordination which both users who participate in the coordination evaluation can more satisfy.

DAIHINMIN, which means Grand Pauper, is a popular playing-card game in Japan. TANHINMIN is a simplified variant of DAIHINMIN, which was proposed by Nishino in 2007 in order to investigate the mathematical properties of DAIHINMIN. In this paper, we consider a 2-player generalized TANHINMIN, where the deck size is arbitrary n. We present a linear-time algorithm that determines which player has a winning strategy after all cards are distributed to the players.

In the bin packing problem, we are asked to place given items, each being of size between zero and one, into bins of capacity one. The goal is to minimize the number of bins that contain at least one item. An online algorithm for the bin packing problem decides where to place each item one by one when it arrives. The asymptotic approximation ratio of the bin packing problem is defined as the performance of an optimal online algorithm for the problem. That value indicates the intrinsic hardness of the bin packing problem. In this paper we study the bin packing problem in which every item is of either size α or size β (≤ α). While the asymptotic approximation ratio for $alpha > rac{1}{2}$ was already identified, that for $alpha leq rac{1}{2}$ is only partially known. This paper is the first to give a lower bound on the asymptotic approximation ratio for any $alpha leq rac{1}{2}$, by formulating linear optimization problems. Furthermore, we derive another lower bound in a closed form by constructing dual feasible solutions.

This paper proposes time division multiplexing (TDM) based reference signal (RS) multiplexing for faster-than-Nyquist (FTN) signaling using orthogonal frequency division multiplexing (OFDM). We also propose a subframe structure in which a cyclic prefix (CP) is appended to only the TDM based RS block and the first FTN symbol to achieve accurate estimation of the channel response in a multipath fading channel with low CP overhead. Computer simulation results show that the loss in the required average received SNR satisfying the average block error rate (BLER) of 10-2 using the proposed TDM based RS multiplexing from that with ideal channel estimation is suppressed to within approximately 1.2dB and 1.7dB for QPSK and 16QAM, respectively. This is compared to when the improvement ratio of the spectral efficiency from CP-OFDM is 1.31 with the rate-1/2 turbo code. We conclude that the TDM based RS multiplexing with the associated CP multiplexing is effective in achieving accurate channel estimation for FTN signaling using OFDM.

We developed a Nb 4-layer process for fabricating superconducting integrated circuits that involves using caldera planarization to increase the flexibility and reliability of the fabrication process. We call this process the planarized high-speed standard process (PHSTP). Planarization enables us to flexibly adjust most of the Nb and SiO2 film thicknesses; we can select reduced film thicknesses to obtain larger mutual coupling depending on the application. It also reduces the risk of intra-layer shorts due to etching residues at the step-edge regions. We describe the detailed process flows of the planarization for the Josephson junction layer and the evaluation of devices fabricated with PHSTP. The results indicated no short defects or degradation in junction characteristics and good agreement between designed and measured inductances and resistances. We also developed single-flux-quantum (SFQ) and adiabatic quantum-flux-parametron (AQFP) logic cell libraries and tested circuits fabricated with PHSTP. We found that the designed circuits operated correctly. The SFQ shift-registers fabricated using PHSTP showed a high yield. Numerical simulation results indicate that the AQFP gates with increased mutual coupling by the planarized layer structure increase the maximum interconnect length between gates.

In daily reality, people often pay attention to several objects that change positions while being observed. In the laboratory, this process is investigated by a phenomenon known as multiple object tracking (MOT) which is a task that evaluates attentive tracking performance. Recent findings suggest that the attentional set for multiple moving objects whose depth changes in three dimensions from one plane to another is influenced by the initial configuration of the objects. When tracking objects, it is difficult for people to expand their attentional set to multiple-depth planes once attention has been focused on a single plane. However, less is known about people contracting their attentional set from multiple-depth planes to a single-depth plane. In two experiments, we examined tracking accuracy when four targets or four distractors, which were initially distributed on two planes, come together on one of the planes during an MOT task. The results from this study suggest that people have difficulty changing the depth range of their attention during attentive tracking, and attentive tracking performance depends on the initial attentional set based on the configuration prior to attentive tracking.

In this paper, we address the problem of detector design in severely frequency-selective channels for spatial multiplexing systems that adopt filter bank multicarrier based on offset quadrature amplitude modulation (FBMC/OQAM) as the communication waveforms. We consider decision feedback equalizers (DFEs) that use multiple feedback filters to jointly cancel the post-cursor components of inter-symbol interference, inter-antenna interference, and, in some configuration, inter-subchannel interference. By exploiting the special structures of the correlation matrix and the staggered property of the FBMC/OQAM signals, we obtain an efficient method of computing the DFE coefficients that requires a smaller number of multiplications than the linear equalizer (LE) and conventional DFE do. The simulation results show that the proposed detectors considerably outperform the LE and conventional DFE at moderate-to-high signal-to-noise ratios.

This letter proposes a power amplifier (PA) with compact matching network. This structure is a parallel dual radial microstrip line in the output matching network branch. The input impedance expression based on the structure is deduced through theoretical analysis, and the load impedance that satisfies the class EFJ PA is obtained through the impedance expression. Compared with the traditional design method, this design method is simple and novel, and the structure is more compact. In order to further improve efficiency and expand bandwidth, the input matching network adopts a stepped impedance matching method. In order to verify the correctness of the design, a broadband high-efficiency PA was designed using GaN HEMT CGH40010F. The test results show that the drain efficiency is 61%-71% in the frequency band 1.4-3.8GHz, the saturated output power is 40.3-41.8dBm, and the size is 53×47mm2.

A universal interconnection network implements arbitrary interconnections among n terminals. This paper considers a problem to realize such a network using contact switches. When n=2, it can be implemented with a single switch. The number of different connections among n terminals is given by the Bell number B(n). The Bell number shows the total number of methods to partition n distinct elements. For n=2, 3, 4, 5 and 6, the corresponding Bell numbers are 2, 5, 15, 52, and 203, respectively. This paper shows a method to realize an n terminal universal interconnection network with $rac {3}{8}(n^2-1)$ contact switches when n=2m+1≥5, and $rac {n}{8}(3n+2)$ contact switches, when n=2m≥6. Also, it shows that a lower bound on the number of contact switches to realize an n-terminal universal interconnection network is ⌈log 2B(n)⌉, where B(n) is the Bell number.

In this letter, we investigate tight analytical and asymptotic upper bounds for bit error rate (BER) of constitutional codes over exponentially correlated Nakagami-m fading channels. Specifically, we derive the BER expression depending on an exact closed-form formula for pairwise error event probabilities (PEEP). Moreover, the corresponding asymptotic analysis in high signal-to-noise ratio (SNR) regime is also explored, which is verified via numerical results. This allows us to have explicit insights on the achievable coding gain and diversity order.

In this letter, a method for the construction of polar codes based on the mutual information approximation (MIA) is proposed for the 4Tb/in2 two-dimensional inter-symbol interference (2D-ISI) channels, such as the bit-patterned magnetic recording (BPMR) and two-dimensional magnetic recording (TDMR). The basic idea is to exploit the MIA between the input and output of a 2D detector to establish a log-likelihood ratio (LLR) distribution model based on the MIA results, which compensates the gap caused by the 2D ISI channel. Consequently, the polar codes obtained by the optimization techniques previously developed for the additive white Gaussian noise (AWGN) channels can also have satisfactory performances over 2D-ISI channels. Simulated results show that the proposed polar codes can outperform the polar codes constructed by the traditional methods over 4Tb/in2 2D-ISI channels.

In this paper, we focus on developing efficient multi-configuration selection mechanisms by exploiting the spatial degrees of freedom (DoF), and leveraging the simple design benefits of spatial modulation (SM). Notably, the SM technique, as well as its variants, faces the following critical challenges: (i) the performance degradation and difficulty in improving the system performance for higher-level QAM constellations, and (ii) the vast complexity cost in precoder designs particularly for the increasing system dimension and amplitude-phase modulation (APM) constellation dimension. Given this situation, we first investigate two independent modulation domains, i.e., the original signal- and spatial-constellations. By exploiting the analog shift weighting and the virtual spatial signature technologies, we introduce the signature spatial modulation (SSM) concept, which is capable of guaranteing superior trade-offs among spectral- and cost-efficiencies, and system bit error rate (BER) performance. Besides, we develop an analog beamforming for SSM by solving the introduced unconstrained Lagrange dual function minimization problem. Numerical results manifest the performance gain brought by our developed analog beamforming for SSM.

Copper sulfide nanoparticles were successfully prepared by laser ablation in liquid. CuS powders in deionized water were irradiated with nanosecond-pulsed laser (Nd:YAG, SHG) to prepare nanoparticles. Prepared nanoparticles were investigated by scanning electron microscopy (SEM), dynamic light scattering (DLS) and fluorospectrometer. According to the results of SEM and DLS, the primary and secondary particle size was decreased with the increase in laser fluence of laser ablation in liquid. The ratio of Cu and S of prepared nanoparticles were not changed. The absorbance of prepared copper sulfide nanoparticles in water was increased with the increase in laser fluence.

A classification function maps a set of vectors into several classes. A machine learning problem is treated as a design problem for partially defined classification functions. To realize classification functions for MNIST hand written digits, three different architectures are considered: Single-unit realization, 45-unit realization, and 45-unit ×r realization. The 45-unit realization consists of 45 ternary classifiers, 10 counters, and a max selector. Test accuracy of these architectures are compared using MNIST data set.

To meet the increasing demand for high-speed communication in VLSI (very large-scale integration) systems, next-generation high-speed data transmission standards (e.g., IEEE 802.3bs and PCIe 6.0) will adopt four-level pulse amplitude modulation (PAM-4) for data coding. Although PAM-4 is spectrally efficient to mitigate inter-symbol interference caused by bandwidth-limited wired channels, it is more sensitive than conventional non-return-to-zero line coding. To evaluate the received signal quality when using adaptive coefficient settings for a PAM-4 equalizer during data transmission, we propose an eye-opening monitor technique based on machine learning. The proposed technique uses a Gaussian mixture model to classify the received PAM-4 symbols. Simulation and experimental results demonstrate the feasibility of adaptive equalization for PAM-4 coding.

Paper recommendation has become an increasingly important yet challenging task due to the rapidly expanding volume and scope of publications in the broad research community. Due to the lack of user profiles in public digital libraries, most existing methods for paper recommendation are through paper similarity measurements based on citations or contents, and still suffer from various performance issues. In this paper, we construct a graphical form of citation relations to identify relevant papers and design a hybrid recommendation model that combines both citation- and content-based approaches to measure paper similarities. Considering that citations at different locations in one article are likely of different significance, we define a concept of citation similarity with varying weights according to the sections of citations. We evaluate the performance of our recommendation method using Spearman correlation on real publication data from public digital libraries such as CiteSeer and Wanfang. Extensive experimental results show that the proposed hybrid method exhibits better performance than state-of-the-art techniques, and achieves 40% higher recommendation accuracy in average in comparison with citation-based approaches.

As scientific and technological resources are experiencing information overload, it is quite expensive to find resources that users are interested in exactly. The personalized recommendation system is a good candidate to solve this problem, but data sparseness and the cold starting problem still prevent the application of the recommendation system. Sparse data affects the quality of the similarity measurement and consequently the quality of the recommender system. In this paper, we propose a matrix factorization recommendation algorithm based on similarity calculation(SCMF), which introduces potential similarity relationships to solve the problem of data sparseness. A penalty factor is adopted in the latent item similarity matrix calculation to capture more real relationships furthermore. We compared our approach with other 6 recommendation algorithms and conducted experiments on 5 public data sets. According to the experimental results, the recommendation precision can improve by 2% to 9% versus the traditional best algorithm. As for sparse data sets, the prediction accuracy can also improve by 0.17% to 18%. Besides, our approach was applied to patent resource exploitation provided by the wanfang patents retrieval system. Experimental results show that our method performs better than commonly used algorithms, especially under the cold starting condition.

To find the exact items from the massive patent resources for users is a matter of great urgency. Although the recommender systems have shot this problem to a certain extent, there are still some challenging problems, such as tracking user interests and improving the recommendation quality when the rating matrix is extremely sparse. In this paper, we propose a novel method called Collaborative Filtering Auto-Encoder for the top-N recommendation. This method employs Auto-Encoders to extract the item's features, converts a high-dimensional sparse vector into a low-dimensional dense vector, and then uses the dense vector for similarity calculation. At the same time, to make the recommendation list closer to the user's recent interests, we divide the recommendation weight into time-based and recent similarity-based weights. In fact, the proposed method is an improved, item-based collaborative filtering model with more flexible components. Experimental results show that the method consistently outperforms state-of-the-art top-N recommendation methods by a significant margin on standard evaluation metrics.

Aiming at the problem that traditional text-level sentiment analysis methods usually ignore the emotional tendency corresponding to the object or attribute. In this paper, a novel two-stage fine-grained text-level sentiment analysis model based on syntactic rule matching and deep semantics is proposed. Based on analyzing the characteristics and difficulties of fine-grained sentiment analysis, a two-stage fine-grained sentiment analysis algorithm framework is constructed. In the first stage, the objects and its corresponding opinions are extracted based on syntactic rules matching to obtain preliminary objects and opinions. The second stage based on deep semantic network to extract more accurate objects and opinions. Aiming at the problem that the extraction result contains multiple objects and opinions to be matched, an object-opinion matching algorithm based on the minimum lexical separation distance is proposed to achieve accurate pairwise matching. Finally, the proposed algorithm is evaluated on several public datasets to demonstrate its practicality and effectiveness.