The growing threat of Hardware Trojans (HT) in the System-on-Chips (SoC) industry has given way to the embedded systems researchers to propose a series of detection methodologies to identify and detect the presence of Trojan circuits or logics inside a host design in the various stages of the chip design and manufacturing process. Many state of the art works propose different techniques for HT detection among which the popular choice remains the Side-Channel Analysis (SCA) based methods that perform differential analysis targeting the difference in consumption of power, change in electromagnetic emanation or the delay in propagation of logic in various paths of the circuit. Even though the effectiveness of these methods are well established, the evaluation is carried out on simplistic models such as AES coprocessors and the analytical approaches used for these methods are limited by some statistical metrics such as direct comparison of EM traces or the T-test coefficients. In this paper, we propose two new detection methodologies based on Machine Learning algorithms. The first method consists in applying the supervised Machine Learning (ML) algorithms on raw EM traces for the classification and detection of HT. It offers a detection rate close to 90% and false negative smaller than 5%. In the second method, we propose an outlier/novelty algorithms based approach. This method combined with the T-test based signal processing technique, when compared with state-of-the-art, offers a better performance with a detection rate close to 100% and a false positive smaller than 1%. In different experiments, the false negative is nearly the same level than the false positive and for that reason the authors only show the false positive value on the results. We have evaluated the performance of our method on a complex target design: RISC-V generic processor. Three HTs with their corresponding sizes: 0.53%, 0.27% and 0.09% of the RISC-V processors are inserted for the experimentation. In this paper we provide elaborative details of our tests and experimental process for reproducibility. The experimental results show that the inserted HTs, though minimalistic, can be successfully detected using our new methodology.

Online feeds are streamed continuously in batches with varied polarities at varying times. The system handling the online feeds must be trained to classify all the varying polarities occurring dynamically. The polarity classification system designed for the online feeds must address two significant challenges: i) stability-plasticity, ii) category-proliferation. The challenges faced in the polarity classification of online feeds can be addressed using the technique of incremental learning, which serves to learn new classes dynamically and also retains the previously learned knowledge. This paper proposes a new incremental learning methodology, ILOF (Incremental Learning of Online Feeds) to classify the feeds by adopting Deep Learning Techniques such as RNN (Recurrent Neural Networks) and LSTM (Long Short Term Memory) and also ELM (Extreme Learning Machine) for addressing the above stated problems. The proposed method creates a separate model for each batch using ELM and incrementally learns from the trained batches. The training of each batch avoids the retraining of old feeds, thus saving training time and memory space. The trained feeds can be discarded when new batch of feeds arrives. Experiments are carried out using the standard datasets comprising of long feeds (IMDB, Sentiment140) and short feeds (Twitter, WhatsApp, and Twitter airline sentiment) and the proposed method showed positive results in terms of better performance and accuracy.

Recent localization methods for wireless networks cannot be applied to dynamic networks with unknown topology. To solve this problem, we propose a localization method based on partial correlation analysis in this paper. We evaluate our proposed localization method in terms of accuracy, which shows that our proposed method can achieve high accuracy localization for dynamic networks with unknown topology.

The efficient implementation strategy for speeding up high-quality clustering algorithms is developed on the basis of general purpose graphic processing units (GPGPUs) in this work. Among various clustering algorithms, a sophisticated Gaussian mixture model (GMM) by estimating parameters through variational Bayesian (VB) mechanism is conducted due to its superior performances. Since the VB-GMM methodology is computation-hungry, the GPGPU is employed to carry out massive matrix-computations. To efficiently migrate the conventional CPU-oriented schemes of VB-GMM onto GPGPU platforms, an entire migration-flow with thirteen stages is presented in detail. The CPU-GPGPU co-operation scheme, execution re-order, and memory access optimization are proposed for optimizing the GPGPU utilization and maximizing the clustering speed. Five types of real-world applications along with relevant data-sets are introduced for the cross-validation. From the experimental results, the feasibility of implementing VB-GMM algorithm by GPGPU is verified with practical benefits. The proposed GPGPU migration achieves 192x speedup in maximum. Furthermore, it succeeded in identifying the proper number of clusters, which is hardly conducted by the EM-algotihm.

Android operating system occupies a high share in the mobile terminal market. It promotes the rapid development of Android applications (apps). However, the emergence of Android malware greatly endangers the security of Android smartphone users. Existing research works have proposed a lot of methods for Android malware detection, but they did not make the utilization of apps' functional category information so that the strong similarity between benign apps in the same functional category is ignored. In this paper, we propose an Android malware detection scheme based on the functional classification. The benign apps in the same functional category are more similar to each other, so we can use less features to detect malware and improve the detection accuracy in the same functional category. The aim of our scheme is to provide an automatic application functional classification method with high accuracy. We design an Android application functional classification method inspired by the hyperlink induced topic search (HITS) algorithm. Using the results of automatic classification, we further design a malware detection method based on app similarity in the same functional category. We use benign apps from the Google Play Store and use malware apps from the Drebin malware set to evaluate our scheme. The experimental results show that our method can effectively improve the accuracy of malware detection.

Virtual Adversarial Training (VAT) has shown impressive results among recently developed regularization methods called consistency regularization. VAT utilizes adversarial samples, generated by injecting perturbation in the input space, for training and thereby enhances the generalization ability of a classifier. However, such adversarial samples can be generated only within a very small area around the input data point, which limits the adversarial effectiveness of such samples. To address this problem we propose LVAT (Latent space VAT), which injects perturbation in the latent space instead of the input space. LVAT can generate adversarial samples flexibly, resulting in more adverse effect and thus more effective regularization. The latent space is built by a generative model, and in this paper we examine two different type of models: variational auto-encoder and normalizing flow, specifically Glow. We evaluated the performance of our method in both supervised and semi-supervised learning scenarios for an image classification task using SVHN and CIFAR-10 datasets. In our evaluation, we found that our method outperforms VAT and other state-of-the-art methods.

Fine-grained image classification is a difficult problem, and previous studies mainly overcome this problem by locating multiple discriminative regions in different scales and then aggregating complementary information explored from the located regions. However, locating discriminative regions introduces heavy overhead and is not suitable for real-world application. In this paper, we propose the recursive multi-scale channel-spatial attention module (RMCSAM) for addressing this problem. Following the experience of previous research on fine-grained image classification, RMCSAM explores multi-scale attentional information. However, the attentional information is explored by recursively refining the deep feature maps of a convolutional neural network (CNN) to better correspond to multi-scale channel-wise and spatial-wise attention, instead of localizing attention regions. In this way, RMCSAM provides a lightweight module that can be inserted into standard CNNs. Experimental results show that RMCSAM can improve the classification accuracy and attention capturing ability over baselines. Also, RMCSAM performs better than other state-of-the-art attention modules in fine-grained image classification, and is complementary to some state-of-the-art approaches for fine-grained image classification. Code is available at https://github.com/Dichao-Liu/Recursive-Multi-Scale-Channel-Spatial-Attention-Module.

Various electromagnetic (EM) wave applications have become commonplace, and humans are frequently exposed to EM waves. Therefore, the effect of EM waves on the human body should be evaluated. In this study, we focused on the specific absorption rate (SAR) due to the EM waves emitted from smartphones, developed high-resolution numerical smartphone models, and studied the SAR variation by changing the position and tilt angle (the angle between the display of the smartphone model and horizontal plane) of the smartphone models vis-à-vis the human abdomen, assuming the use of the smartphone at various tilt angles in front of the abdomen. The calculations showed that the surface shape of the human model influenced the SAR variation.

Physical attacks against cryptographic devices and their countermeasures have been studied for over a decade. Physical attacks on block-cipher algorithms usually target a few rounds near the input or the output of cryptographic algorithms. Therefore, in order to reduce the implementation cost or increase the performance, countermeasures tend to be applied to the rounds that can be targeted by physical attacks. For example, for AES, the conventional physical attacks have practical complexity when the target leakage is as deep as 4 rounds. In general, the deeper rounds are targeted, the greater the cost required for attackers. In this paper, we focus on the physical attack that uses the leakage as deep as 5 rounds. Specifically, we consider the recently proposed 5-round mixture differential cryptanalysis, which is not physical attack, into the physical attack scenarios, and propose the corresponding physical attack. The proposed attack can break AES-128 with data complexity and time complexity of 225.31. As a result, it is clear that the rounds as deep as 5 must be protected for AES. Furthermore, we evaluated the proposed attack when the information extracted from side-channel leakage contains noise. In the means of theoretical analysis and simulated attacks, the relationship between the accuracy of information leakage and the complexity of the attack is evaluated.

In channel decoding, a decoder with suboptimal metrics may be used because of the uncertainty of the channel statistics or the limitations of the decoder. In this case, the decoding metric is different from the actual channel metric, and thus it is called mismatched decoding. In this paper, applying the technique of the DS2 bound, we derive an upper bound on the error probability of mismatched decoding over a regular channel for the ensemble of linear block codes, which was defined by Hof, Sason and Shamai. Assuming the ensemble of random linear block codes defined by Gallager, we show that the obtained bound is not looser than the conventional bound. We also give a numerical example for the ensemble of LDPC codes also introduced by Gallager, which shows that our proposed bound is tighter than the conventional bound. Furthermore, we obtain a single letter error exponent for linear block codes.

Integer division is one of the most fundamental arithmetic operators and is ubiquitously used. However, the existing division protocols in secure multi-party computation (MPC) are inefficient and very complex, and this has been a barrier to applications of MPC such as secure machine learning. We already have some secure division protocols working in Z2n. However, these existing results have drawbacks that those protocols needed many communication rounds and needed to use bigger integers than in/output. In this paper, we improve a secure division protocol in two ways. First, we construct a new protocol using only the same size integers as in/output. Second, we build efficient constant-round building blocks used as subprotocols in the division protocol. With these two improvements, communication rounds of our division protocol are reduced to about 36% (87 rounds → 31 rounds) for 64-bit integers in comparison with the most efficient previous one.

In the user identification (UI) scheme for a multiple-access fading channel based on a randomly generated (0, 1, -1)-signature code, previous studies used the signature code over a noisy multiple-access adder channel, and only the user state information (USI) was decoded by the signature decoder. However, by considering the communication model as a compressed sensing process, it is possible to estimate the channel coefficients while identifying users. In this study, to improve the efficiency of the decoding process, we propose an iterative deep neural network (DNN)-based decoder. Simulation results show that for the randomly generated (0, 1, -1)-signature code, the proposed DNN-based decoder requires less computing time than the classical signal recovery algorithm used in compressed sensing while achieving higher UI and channel estimation (CE) accuracies.

A 6.5Gb/s shared bus that uses a 65nm CMOS pulse transceiver chip with a low frequency equalizer and electromagnetic connectors based on two types of transmission line couplers is presented. The amount of backplane wiring is reduced by a factor of 1/16 and total connector volume by a factor of 1/246. It reduces the size and weight of a satellite processor system by 60%, increases the data rate by a factor of 2.6, and satisfies the EMC standard for withstanding the strong shock of rocket launch.

Double modular redundancy (DMR) is to execute an operation twice and detect a soft error by comparing the duplicated operation results. The soft error is corrected by re-executing necessary operations. The re-execution requires error-free input data and registers are needed to store such necessary error-free data. In this paper, a method to minimize the required number of registers is proposed where an appropriate subgraph partitioning of operation nodes are searched. In addition, using the proposed register minimization method, a minimization of the area of functional units and registers required to implement the DMR design is proposed.

The newly proposed orthogonal time frequency space (OTFS) system exhibits excellent error performance on high-Doppler fading channels. However, the rectangular prototype window function (PWF) inherent in OTFS leads to high out-of-band emission (OOBE), which reduces the spectral efficiency in multi-user scenarios. To this end, this paper presents an OTFS system based on bi-orthogonal frequency division multiplexing (OTFS-BFDM) modulation. In OTFS-BFDM systems, PWFs with bi-orthogonal properties can be optimized to provide lower OOBE than OTFS, which is a special case with rectangular PWF. We further derive that the OTFS-BFDM system is sparsely-connected so that the low-complexity message passing (MP) decoding algorithm can be adopted. Moreover, the power spectral density, peak to average power ratio (PAPR) and bit error rate (BER) of the OTFS-BFDM system with different PWFs are compared. Simulation results show that: i) the use of BFDM modulation significantly inhibits the OOBE of OTFS system; ii) the better the frequency-domain localization of PWFs, the smaller the BER and PAPR of OTFS-BFDM system.

To safeguard critical services and assets in a distributed environment, collaborative intrusion detection systems (CIDSs) are usually adopted to share necessary data and information among various nodes, and enhance the detection capability. For simplifying the network management, software defined networking (SDN) is an emerging platform that decouples the controller plane from the data plane. Intuitively, SDN can help lighten the management complexity in CIDSs, and a CIDS can protect the security of SDN. In practical implementation, trust management is an important approach to help identify insider attacks (or malicious nodes) in CIDSs, but the challenge is how to ensure the data integrity when evaluating the reputation of a node. Motivated by the recent development of blockchain technology, in this work, we design BlockCSDN — a framework of blockchain-based collaborative intrusion detection in SDN, and take the challenge-based CIDS as a study. The experimental results under both external and internal attacks indicate that using blockchain technology can benefit the robustness and security of CIDSs and SDN.

In this letter, firstly, a novel adaptive beamformer using independent component analysis (ICA) algorithm is proposed. By this algorithm, the ambiguity of amplitude and phase resulted from blind source separation is removed utilizing the special structure of array manifolds matrix. However, there might exist great calibration error when the powers of interferences are far larger than that of desired signal at many applications such as sonar, radio astronomy, biomedical engineering and earthquake detection. As a result, this will lead to a significant reduction in separation performance. Then, a new method based on the combination of ICA and primary component analysis (PCA) is proposed to recover the desired signal's amplitude under strong interference. Finally, computer simulation is carried out to indicate the effectiveness of our methods. The simulation results show that the proposed methods can obtain higher SNR and more accurate power estimation of desired signal than diagonal loading sample matrix inversion (LSMI) and worst-case performance optimization (WCPO) method.

In-band full-duplex (IBFD) has been an attractive technology, which can theoretically double the spectral efficiency. However, when performing IBFD in the dynamic-duplex cellular (DDC) system, inter-user interference (IUI) deteriorates transmission performance in downlink (DL) communication and limits IBFD-applicable area and IBFD application ratio. In this paper, to expand the IBFD-applicable area and improve the IBFD application ratio, we propose an IUI reduction scheme using successive interference cancellation (SIC) for the DDC system. SIC can utilize the power difference and reduce the signal with the higher power. The effectiveness of the proposed scheme is evaluated by the computer simulation. The IUI reducing effect on the IBFD-inapplicable area is confirmed when the received power of the IUI is stronger than that of the desired signal at the user equipment for DL (DL-UE). The IBFD-inapplicable area within 95m from the DL-UE, where the IBFD does not work without the proposed scheme, can reduce by 43.6% from 52.8% to 9.2% by applying the proposed scheme. Moreover, the IBFD application ratio can improve by 24.6% from 69.5% to 94.1%.

Neural network-based three-dimensional (3D) reconstruction methods have produced promising results. However, they do not pay particular attention to reconstructing detailed parts of objects. This occurs because the network is not designed to capture the fine details of objects. In this paper, we propose a network designed to capture both the coarse and fine details of objects to improve the reconstruction of the fine parts of objects.

With the development of Internet technology, the demand for signing electronic contracts has been greatly increased. The electronic contract generated by the participants in an online way enjoys the same legal effect as paper contract. The fairness is the key issue in jointly signing electronic contracts by the involved participants, so that all participants can either get the same copy of the contract or nothing. Most existing solutions only focus on the fairness of electronic contract generation between two participants, where the digital signature can effectively guarantee the fairness of the exchange of electronic contracts and becomes the conventional technology in designing the contract signing protocol. In this paper, an efficient blockchain-based multi-party electronic contract signing (MECS) protocol is presented, which not only offers the fairness of electronic contract generation for multiple participants, but also allows each participant to aggregate validate the signed copy of others. Security analysis shows that the proposed MECS protocol enjoys unforgeability, non-repudiation and fairness of electronic contracts, and performance analysis demonstrates the high efficiency of our construction.