This paper proposes an analytical model of maximum operating frequency of class-D zero-voltage-switching (ZVS) inverter. The model includes linearized drain-source parasitic capacitance and any duty ratio. The nonlinear drain-source parasitic capacitance is equally linearized through a charge-related equation. The model expresses the relationship among frequency, shunt capacitance, duty ratio, load impedance, output current phase, and DC input voltage under the ZVS condition. The analytical result shows that the maximum operating frequency under the ZVS condition can be obtained when the duty ratio, the output current phase, and the DC input voltage are set to optimal values. A 650 V/30 A SiC-MOSFET is utilized for both simulated and experimental verification, resulting in good consistency.

Highly conflicting evidence that may lead to the counter-intuitive results is one of the challenges for information fusion in Dempster-Shafer evidence theory. To deal with this issue, evidence conflict is investigated based on belief divergence measuring the discrepancy between evidence. In this paper, the pignistic probability transform belief χ2 divergence, named as BBχ2 divergence, is proposed. By introducing the pignistic probability transform, the proposed BBχ2 divergence can accurately quantify the difference between evidence with the consideration of multi-element sets. Compared with a few belief divergences, the novel divergence has more precision. Based on this advantageous divergence, a new multi-source information fusion method is devised. The proposed method considers both credibility weights and information volume weights to determine the overall weight of each evidence. Eventually, the proposed method is applied in target recognition and fault diagnosis, in which comparative analysis indicates that the proposed method can realize the highest accuracy for managing evidence conflict.

The prediction of peak power load is a critical factor directly impacting the stability of power supply, characterized significantly by its time series nature and intricate ties to the seasonal patterns in electricity usage. Despite its crucial importance, the current landscape of power peak load forecasting remains a multifaceted challenge in the field. This study aims to contribute to this domain by proposing a method that leverages a combination of three primary models - the GRU model, self-attention mechanism, and Transformer mechanism - to forecast peak power load. To contextualize this research within the ongoing discourse, it’s essential to consider the evolving methodologies and advancements in power peak load forecasting. By delving into additional references addressing the complexities and current state of the power peak load forecasting problem, this study aims to build upon the existing knowledge base and offer insights into contemporary challenges and strategies adopted within the field. Data preprocessing in this study involves comprehensive cleaning, standardization, and the design of relevant functions to ensure robustness in the predictive modeling process. Additionally, recognizing the necessity to capture temporal changes effectively, this research incorporates features such as “Weekly Moving Average” and “Monthly Moving Average” into the dataset. To evaluate the proposed methodologies comprehensively, this study conducts comparative analyses with established models such as LSTM, Self-attention network, Transformer, ARIMA, and SVR. The outcomes reveal that the models proposed in this study exhibit superior predictive performance compared to these established models, showcasing their effectiveness in accurately forecasting electricity consumption. The significance of this research lies in two primary contributions. Firstly, it introduces an innovative prediction method combining the GRU model, self-attention mechanism, and Transformer mechanism, aligning with the contemporary evolution of predictive modeling techniques in the field. Secondly, it introduces and emphasizes the utility of “Weekly Moving Average” and “Monthly Moving Average” methodologies, crucial in effectively capturing and interpreting seasonal variations within the dataset. By incorporating these features, this study enhances the model’s ability to account for seasonal influencing factors, thereby significantly improving the accuracy of peak power load forecasting. This contribution aligns with the ongoing efforts to refine forecasting methodologies and addresses the pertinent challenges within power peak load forecasting.

This paper proposes a determination method of the cascaded number for lumped parameter models (LPMs) of the transmission lines. The LPM is used to simulate long-distance transmission lines, and the cascaded number significantly impacts the simulation results. Currently, there is a lack of a system-level determination method of the cascaded number for LPMs. Based on the theoretical analysis and eigenvalue decomposition of network matrix, this paper discusses the error in resonance characteristics between distributed parameter model and LPMs. Moreover, it is deduced that optimal cascaded numbers of the cascaded π-type and T-type LPMs are the same, and the Γ-type LPM has a lowest analog accuracy. The principle that the maximum simulation frequency is less than the first resonance frequency of each segment is presented. According to the principle, optimal cascaded numbers of cascaded π-type, T-type, and Γ-type LPMs are obtained. The effectiveness of the proposed determination method is verified by simulation.

Orthogonal frequency division multiplexing with index modulation (OFDM-IM) is a novel scheme where the information bits are conveyed through the subcarrier activation pattern (SAP) and the symbols on the active subcarriers. Specifically, the subcarriers are partitioned into many subblocks and the subcarriers in each subblock can have two states, active or idle. Unfortunately, OFDM-IM inherits the high peak-to-average power ratio (PAPR) problem from the classical OFDM. The OFDM-IM signal with high PAPR induces in-band distortion and out-of-band radiation when it passes through high power amplifier (HPA). Recently, there are attempts to reduce PAPR by exploiting the unique structure of OFDM-IM, which is adding dither signals in the idle subcarriers. The most recent work dealing with the dither signals is using dithers signals with various amplitude constraints according to the characteristic of the corresponding OFDM-IM subblock. This is reasonable because OFDM subblocks have distinct levels of robustness against noise. However, the amplitude constraint in the recent work is efficient for only additive white Gaussian noise (AWGN) channels and cannot be used for maximum likelihood (ML) detection. Therefore, in this paper, based on pairwise error probability (PEP) analysis, a specific constraint for the dither signals is derived over a Rayleigh fading channel.

Accurate segmentation of fundus vessel structure can effectively assist doctors in diagnosing eye diseases. In this paper, we propose a fundus blood vessel segmentation network combined with cross-modal features and verify our method on the public data set OCTA-500. Experimental results show that our method has high accuracy and robustness.

In future deep space communication missions, VLBI (Very Long Baseline Interferometry) based on antenna array technology remains a critical detection method, which urgently requires the improvement of synthesis performance for antenna array signals. Considering this, focusing on optimizing the traditional antenna grouping method applied in the phase estimation algorithm, this letter proposes a “L/2 to L/2” antenna grouping method based on the maximum correlation signal-to-noise ratio (SNR). Following this idea, a phase difference estimation algorithm named “Couple” is presented. Theoretical analysis and simulation verification illustrate that: when ρ ＜ -10dB, the proposed “Couple” has the highest performance; increasing the number of antennas can significantly improve its synthetic loss performance and robustness. The research of this letter indicates a promising potential in supporting the rising deep space exploration and communication missions.

Space is becoming increasingly congested and contested, which calls for effective means to conduct effective monitoring of high-value space assets, especially in Space Situational Awareness (SSA) missions, while there are imperfections in existing methods and corresponding algorithms. To overcome such a problem, this letter proposes an algorithm for accurate Connected Element Interferometry (CEI) in SSA based on more interpolation information and iterations. Simulation results show that: (i) after iterations, the estimated asymptotic variance of the proposed method can basically achieve uniform convergence, and the ratio of it to ACRB is 1.00235 in δ0 ∈ [-0.5, 0.5], which is closer to 1 than the current best AM algorithms; (ii) In the interval of SNR ∈ [-14dB, 0dB], the estimation error of the proposed algorithm decreases significantly, which is basically comparable to CRLB (maintains at 1.236 times). The research of this letter could play a significant role in effective monitoring and high-precision tracking and measurement with significant space targets during futuristic SSA missions.

Convolutional neural network (CNN) is widely used in acoustic scene classification (ASC) tasks. In most cases, local convolution is utilized to gather time-frequency information between spectrum nodes. It is challenging to adequately express the non-local link between frequency domains in a finite convolution region. In this paper, we propose a dual-path convolutional neural network based on band interaction block (DCNN-bi) for ASC, with mel-spectrogram as the model’s input. We build two parallel CNN paths to learn the high-frequency and low-frequency components of the input feature. Additionally, we have created three band interaction blocks (bi-blocks) to explore the pertinent nodes between various frequency bands, which are connected between two paths. Combining the time-frequency information from two paths, the bi-blocks with three distinct designs acquire non-local information and send it back to the respective paths. The experimental results indicate that the utilization of the bi-block has the potential to improve the initial performance of the CNN substantially. Specifically, when applied to the DCASE 2018 and DCASE 2020 datasets, the CNN exhibited performance improvements of 1.79% and 3.06%, respectively.

To achieve precise measurement without landing, the high-mobility vehicle-mounted theodolite needs to be leveled quickly with high precision and ensure sufficient support stability before work. After the measurement, it is also necessary to ensure that the high-mobility vehicle-mounted theodolite can be quickly withdrawn. Therefore, this paper proposes a hierarchical automatic leveling strategy and establishes a two-stage electromechanical automatic leveling mechanism model. Using coarse leveling of the first-stage automatic leveling mechanism and fine leveling of the second-stage automatic leveling mechanism, the model realizes high-precision and fast leveling of the vehicle-mounted theodolites. Then, the leveling control method based on repeated positioning is proposed for the first-stage automatic leveling mechanism. To realize the rapid withdrawal for high-mobility vehicle-mounted theodolites, the method ensures the coincidence of spatial movement paths when the structural parts are unfolded and withdrawn. Next, the leg static balance equation is constructed in the leveling state, and the support force detection method is discussed in realizing the stable support for vehicle-mounted theodolites. Furthermore, a mathematical model for “false leg” detection is established furtherly, and a “false leg” detection scheme based on the support force detection method is analyzed to significantly improve the support stability of vehicle-mounted theodolites. Finally, an experimental platform is constructed to perform the performance test for automatic leveling mechanisms. The experimental results show that the leveling accuracy of established two-stage electromechanical automatic leveling mechanism can reach 3.6″, and the leveling time is no more than 2 mins. The maximum support force error of the support force detection method is less than 15%, and the average support force error is less than 10%. In contrast, the maximum support force error of the drive motor torque detection method reaches 80.12%, and its leg support stability is much less than the support force detection method. The model and analysis method proposed in this paper can also be used for vehicle-mounted radar, vehicle-mounted laser measurement devices, vehicle-mounted artillery launchers and other types of vehicle-mounted equipment with high-precision and high-mobility working requirements.

Artificial intelligence and the introduction of Internet of Things technologies have benefited from technological advances and new automated computer system technologies. Eventually, it is now possible to integrate them into a single offline industrial system. This is accomplished through machine-to-machine communication, which eliminates the human factor. The purpose of this article is to examine security systems for machine-to-machine communication systems that rely on identification and authentication algorithms for real-time monitoring. The article investigates security methods for quickly resolving data processing issues by using the Security operations Center’s main machine to identify and authenticate devices from 19 different machines. The results indicate that when machines are running offline and performing various tasks, they can be exposed to data leaks and malware attacks by both the individual machine and the system as a whole. The study looks at the operation of 19 computers, 7 of which were subjected to data leakage and malware attacks. AnyLogic software is used to create visual representations of the results using wireless networks and algorithms based on previously processed methods. The W76S is used as a protective element within intelligent sensors due to its built-in memory protection. For 4 machines, the data leakage time with malware attacks was 70 s. For 10 machines, the duration was 150 s with 3 attacks. Machine 15 had the longest attack duration, lasting 190 s and involving 6 malware attacks, while machine 19 had the shortest attack duration, lasting 200 s and involving 7 malware attacks. The highest numbers indicated that attempting to hack a system increased the risk of damaging a device, potentially resulting in the entire system with connected devices failing. Thus, illegal attacks by attackers using malware may be identified over time, and data processing effects can be prevented by intelligent control. The results reveal that applying identification and authentication methods using a protocol increases cyber-physical system security while also allowing real-time monitoring of offline system security.

This paper proposes a scheme for reducing pilot interference in cell-free massive multiple-input multiple-output (MIMO) systems through scalable access point (AP) selection and efficient pilot allocation using the Grey Wolf Optimizer (GWO). Specifically, we introduce a bidirectional large-scale fading-based (B-LSFB) AP selection method that builds high-quality connections benefiting both APs and UEs. Then, we limit the number of UEs that each AP can serve and encourage competition among UEs to improve the scalability of this approach. Additionally, we propose a grey wolf optimization based pilot allocation (GWOPA) scheme to minimize pilot contamination. Specifically, we first define a fitness function to quantify the level of pilot interference between UEs, and then construct dynamic interference relationships between any UE and its serving AP sets using a weighted fitness function to minimize pilot interference. The simulation results shows that the B-LSFB strategy achieves scalability with performance similar to large-scale fading-based (LSFB) AP selection. Furthermore, the grey wolf optimization-based pilot allocation scheme significantly improves per-user net throughput with low complexity compared to four existing schemes.

The existing discrete-logarithm-based two-round multi-signature schemes without using the idealized model, i.e., the Algebraic Group Model (AGM), have quite large reduction loss. This means that an implementation of these schemes requires an elliptic curve (EC) with a very large order for the standard 128-bit security when we consider concrete security. Indeed, the existing standardized ECs have orders too small to ensure 128-bit security of such schemes. Recently, Pan and Wagner proposed two two-round schemes based on the Decisional Diffie-Hellman (DDH) assumption (EUROCRYPT 2023). For 128-bit security in concrete security, the first scheme can use the NIST-standardized EC P-256 and the second can use P-384. However, with these parameter choices, they do not improve the signature size and the communication complexity over the existing non-tight schemes. Therefore, there is no two-round scheme that (i) can use a standardized EC for 128-bit security and (ii) has high efficiency. In this paper, we construct a two-round multi-signature scheme achieving both of them from the DDH assumption. We prove that an EC with at least a 321-bit order is sufficient for our scheme to ensure 128-bit security. Thus, we can use the NIST-standardized EC P-384 for 128-bit security. Moreover, the signature size and the communication complexity per one signer of our proposed scheme under P-384 are 1152 bits and 1535 bits, respectively. These are most efficient among the existing two-round schemes without using the AGM including Pan-Wagner’s schemes and non-tight schemes which do not use the AGM. Our experiment on an ordinary machine shows that for signing and verification, each can be completed in about 65 ms under 100 signers. This shows that our scheme has sufficiently reasonable running time in practice.

Stochastic Computing (SC) allows additions and multiplications to be realized with lower power than the conventional binary operations if we admit some errors. However, for many complex functions which cannot be realized by only additions and multiplications, we do not know a generic efficient method to calculate a function by using an SC circuit; it is necessary to realize an SC circuit by using a generic method such as polynomial approximation methods for such a function, which may lose the advantage of SC. Thus, there have been many researches to consider efficient SC realization for specific functions; an efficient SC square root circuit with a feedback circuit was proposed by D. Wu et al. recently. This paper generalizes the SC square root circuit with a feedback circuit; we identify a situation when we can implement a function efficiently by an SC circuit with a feedback circuit. As examples of our generalization, we propose SC circuits to calculate the n-th root calculation and division. We also show our analysis on the accuracy of our SC circuits and the hardware costs; our results show the effectiveness of our method compared to the conventional SC designs; our framework may be able to implement a SC circuit that is better than the existing methods in terms of the hardware cost or the calculation error.

The purpose of Facial Beauty Prediction (FBP) is to automatically assess facial attractiveness based on human aesthetics. Most neural network-based prediction methods do not consider the ranking information in the task. For scoring tasks like facial beauty prediction, there is abundant ranking information both between images and within images. Reasonable utilization of these information during training can greatly improve the performance of the model. In this paper, we propose a novel end-to-end Convolutional Neural Network (CNN) model based on ranking information of images, incorporating a Rank Module and an Adaptive Weight Module. We also design pairwise ranking loss functions to fully leverage the ranking information of images. Considering training efficiency and model inference capability, we choose ResNet-50 as the backbone network. We conduct experiments on the SCUT-FBP5500 dataset and the results show that our model achieves a new state-of-the-art performance. Furthermore, ablation experiments show that our approach greatly contributes to improving the model performance. Finally, the Rank Module with the corresponding ranking loss is plug-and-play and can be extended to any CNN model and any task with ranking information. Code is available at https://github.com/nehcoah/Rank-Info-Net.

Modern high-level programming languages have a wide variety of grammar and can implement the required functionality in different ways. The authors believe that a large amount of code that implements the same functionality in different ways exists even in open source software where the source code is publicly available, and that by collecting such code, a useful data set can be constructed for various studies in software engineering. In this study, we construct a dataset of pairs of Java methods that have the same functionality but different structures from approximately 314 million lines of source code. To construct this dataset, the authors used an automated test generation technique, EvoSuite. Test cases generated by automated test generation techniques have the property that the test cases always succeed. In constructing the dataset, using this property, test cases generated from two methods were executed against each other to automatically determine whether the behavior of the two methods is the same to some extent. Pairs of methods for which all test cases succeeded in cross-running test cases are manually investigated to be functionally equivalent. This paper also reports the results of an accuracy evaluation of code clone detection tools using the constructed dataset. The purpose of this evaluation is assessing how accurately code clone detection tools could find the functionally equivalent methods, not assessing the accuracy of detecting ordinary clones. The constructed dataset is available at github (https://github.com/YoshikiHigo/FEMPDataset).

Simple and quick tests at medical clinics have become increasingly important. Magnetic sensing techniques have been developed to detect biomarkers using magnetic nanoparticles in liquid-phase assays. We developed a biomarker assay that involves using an alternating current (AC) susceptibility measurement system that uses functional magnetic particles and magnetic sensing technology. We also developed compact biomarker measuring equipment to enable quick testing. Our assay is a one-step homogeneous assay that involves simply mixing a sample with a reagent, shortening testing time and simplifying processing. Using our compact measuring equipment, which includes anisotropic magneto resistance (AMR) sensors, we conducted high-sensitivity measurements of extremely small amounts of two biomarkers (C-reactive protein, CRP and α-Fetoprotein, AFP) used for diagnosing arteriosclerosis and malignant tumors. The results indicate that an extremely small amount of CRP and AFP could be detected within 15 min, which demonstrated the possibility of a simple and quick high-sensitivity immunoassay that involves using an AC-susceptibility measurement system.

In this work, the core size estimation technique of magnetic nanoparticles (MNPs) using the static magnetization curve obtained from a high-Tc SQUID magnetometer and a metaheuristic inversion technique based on the Particle Swarm Optimizer (PSO) algorithm is presented. The high-Tc SQUID magnetometer is constructed from a high-Tc SQUID sensor coupled by a flux transformer to sense the modulated magnetization signal from a sample. The magnetization signal is modulated by the lateral vibration of the sample on top of a planar differential detection coil of the flux transformer. A pair of primary and excitation coils are utilized to apply an excitation field parallel to the sensitive axis of the detection coil. Using the high-Tc SQUID magnetometer, the magnetization curve of a commercial MNP sample (Resovist) was measured in a logarithmic scale of the excitation field. The PSO inverse technique is then applied to the magnetization curve to construct the magnetic moment distribution. A multimodal normalized log-normal distribution was used in the minimization of the objective function of the PSO inversion technique, and a modification of the PSO search region is proposed to improve the exploration and exploitation of the PSO particles. As a result, a good agreement on the Resovist magnetic core size was obtained between the proposed technique and the non-negative least square (NNLS) inversion technique. The estimated core sizes of 8.0484 nm and 20.3018 nm agreed well with the values reported in the literature using the commercial low-Tc SQUID magnetometer with the SVD and NNLS inversion techniques. Compared to the NNLS inversion technique, the PSO inversion technique had merits in exploring an optimal core size distribution freely without being regularized by a parameter and facilitating an easy peak position determination owing to the smoothness of the constructed distribution. The combination of the high-Tc SQUID magnetometer and the PSO-based reconstruction technique offers a powerful approach for characterizing the MNP core size distribution, and further improvements can be expected from the recent state-of-the-art optimization algorithm to optimize further the computation time and the best objective function value.

The magnetic field resolution of the tunnel magneto-resistive (TMR) sensors has been improving and it reaches below 1.0 pT/Hz0.5 at low frequency. The real-time measurement of the magnetocardiography (MCG) and the measurement of the magnetoencephalography (MEG) have been demonstrated by developed TMR sensors. Although the MCG and MEG have been applied to diagnosis of diseases, the conventional MCG/MEG system using superconducting quantum interference devices (SQUIDs) cannot measure the signal by touching the body, the body must be fixed, and maintenance costs are huge. The MCG/MEG system with TMR sensors operating at room temperature have the potential to solve these problems. In addition, it has the great advantage that it does not require a special magnetic shielded room. Further developments are expected to progress to maximize these unique features of TMR sensors.

A 0.13mJ/prediction with 68.6% accuracy wired-logic deep neural network (DNN) processor is developed in a single 16-nm field-programmable gate array (FPGA) chip. Compared with conventional von-Neumann architecture DNN processors, the energy efficiency is greatly improved by eliminating DRAM/BRAM access. A technical challenge for conventional wired-logic processors is the large amount of hardware resources required for implementing large-scale neural networks. To implement a large-scale convolutional neural network (CNN) into a single FPGA chip, two technologies are introduced: (1) a sparse neural network known as a non-linear neural network (NNN), and (2) a newly developed raster-scan wired-logic architecture. Furthermore, a novel high-level synthesis (HLS) technique for wired-logic processor is proposed. The proposed HLS technique enables the automatic generation of two key components: (1) Verilog-hardware description language (HDL) code for a raster-scan-based wired-logic processor and (2) test bench code for conducting equivalence checking. The automated process significantly mitigates the time and effort required for implementation and debugging. Compared with the state-of-the-art FPGA-based processor, 238 times better energy efficiency is achieved with only a slight decrease in accuracy on the CIFAR-100 task. In addition, 7 times better energy efficiency is achieved compared with the state-of-the-art network-optimized application-specific integrated circuit (ASIC).