This letter presents a new method for adaptive control of nonminimum phase discrete-time systems with disturbances based on the technique of pole-zero placement. The long division method is used to decompose apolynomial into a stable polynomial and an unstable one. Finally, the results of computer simulation are presented to illustrate the effectiveness of the proposed method.

The small-signal negative resistance of QWITT (Quantum Well Transit-Time) diodes is calculated including the effect of field-dependent diffusion coefficient in the frequency range of 10 to 300 GHz. The drift velocity transient effect is also included. The result is compared with those obtained by using constant diffusion coefficients at average electric fields.

This paper describes IC-oriented high-performance AlGaAs/GaAs heterojunction bipolar transistors that were fabricated to demonstrate their great potential in applications to high-speed integrated circuits. A collector structure of ballistic collection transistors with a launcher (LBCTs) shortens the intrinsic delay time of the transistors. A novel and simple self-aligned fabrication process, which features an base-metal-overlaid structure (BMO), reduces emitter- and base-resistances and collector capacitance. The combination of the thin-collector LBCT layer structure and the BMO self-alignment technology raises the average value of cutoff frequency, fT, to 160 GHz with a standard deviation as small as 4.3 GHz. By modifying collector thickness and using Pt/Ti/Pt/Au as the base ohmic contact metal in BMO-LBCTs, the maximum oscillation frequency, fmax, reaches 148 GHz with a 114 GHz fT. A 2:1 multiplexer with retiming D-type flip-flops (DFFs) at input/output stages fabricated on a wafer with the thin-collector LBCT structure operates at 19 Gbit/s. A monolithic preamplifier fabricated on the same wafer has a transimpedance of 52 dBΩ with a 3-dB-down bandwidth of 18.5 GHz and a gain S21 OF 21 dB with a 3-dB-down bandwidth of 19 GHz. Finally, a 40 Gbit/s selector IC and a 50 GHz dynamic frequency divider that were successfully fabricated using the 148-GHz fmax technologies are described.

A coherent communication system using squeezed light is one of candidates for a realization of super-reliable systems. In order to design such a system, it is essential to understand and to analyze modulators mathematically. However, quantum noise of squeezed light has a colored spectrum which changes with respect to phase of a local laser. Therefore the optimization of the relationship between signal and quantum noise spectrums is required at a modulator to obtain the ultimate performance of the communication system. In this paper, some ideas of modulators for squeezed light are proposed and their spectrum transformations are given. After the brief summary of squeezed quantum noise, a new concept which originates from the restriction of the local laser phase is applied to it. This concept makes a problem originated from a colored quantum noise spectrum more serious. It results in the optimization problem for the relationship between the quantum noise spectrum and signal power spectrum. The solution of this problem is also given under the restriction of local laser phase. As a result, a general design theory for coherent communication system using the squeezed light is given.

Since the time required for testing logic circuits is proportional to the number of test vectors, the size of test sets as well as test generation time is one of the most important factors to be considered in test generation. The size of test sets becomes an essential issue, especially for scan designed circuits, because of the need to shift a test vector serially into the scan path. In this paper, we propose new methods of generating compact test sets to detect al the irredundant single stuck-at faults in combinational circuits. The proposed algorithms calculate a test function for each fault which corresponds to the set of all test vectors for the fault and generate a compact test set by analyzing the test functions. The analysis is based on finding a test vector which detects the largest number of remaining faults. Since our methods select a test vector among all the test vectors, represented by a test function, for a target fault, smaller test sets can be generated, in general, than that by conventional test set compaction methods. The experimental results show that the size of test sets generated by our method is about one-third as large as that without compaction.

Gamma(γ)-ray irradiation effects have been investigated on three types of low-noise HEMTs, AlGaAs/GaAs conventional HEMT (conv. HEMT), AlGaAs/InGaAs pseudomorphic HEMT (P-HEMT) and InAlAs/InGaAs/InP HEMT (InP-based HEMT). The dose of irradiated γ-rays ranges from 1105 to 1108 rad. DC and RF characteristics of each type of HEMT are measured before and after irradiation and the parameter changes are investigated. For conv. HEMT and P-HEMT, no degradation of DC parameter is observed up to 108 rad, while noise figure (NF) at 12 GHz remains constant up to 107 rad and degrades by 0.1 dB at 108 rad. The InP-based HEMT shows IDSS and gm increase by about 10% at a dose of 108 rad and its NF at 18 GHz lowers gradually with the radiation dose. It has been found that the radiation hardness is greater than 107 rad for all types of HEMTs and over a hundred years of life can be expected against γ-ray irradiation in the space environment.

This paper summarizes basic system design for an optical fiber feeder for microcellular mobile communication systems. The optical feeder enables compact and low cost base stations, easy radio channel control and flexible mobile communication systems. Basic transmission characteristics are investigated through optical transmission experiments. By using these results, feeder performance is estimated and optimal system parameters are designed.

This paper tends to analyze the trends of the research in logic synthesis. The first part is devoted to an expertise of the efficiency of factorization methods developed during the last decade and to the proposal of dedicated methods for complex logic blocks. The second part shows the importance of Binary Decision Diagrams as representation of Boolean functions. Their use in the technology mapping phase of multiplexor-based FPGAs in an industrial tool is taken as illustration.

A fiber-optic transmission system for linking radio base stations to the mobile communication center is developed, and its performance is evaluated. The introduction of this system yields two main improvements: optimum zone allocation to increase radio frequency utilization efficiency and the elimination of service quality issues such as dead zones and traffic imbalance. Being optical, the system suffers from the interferometric noise and distortion created by multiple reflections within the fiber. Moreover, because system response is much different from that of optical CATV systems, we clarify the optical parameter selection criteria and hypothetical return loss model for an embedded fiber infrastructure. An optical multiplexing method is also introduced that reduces the quantity of fiber and connectors, as well as splicing and cable installation costs. A new ternary optical multiplexing architecture combined with a cost-effective self-tuning type WDM technique and a high isolation type circulator are proposed for the 1.3µm wavelength region. The performance of low distortion high power common amplifiers is measured with the aim of reducing the size and weight of back-up batteries, and to improve the packaging density of the typical base station.

This paper presents a delivery mechanism using a spectrum delivery switch (SDS) in a microcell system. In our fiber-optic microcell systems, modulators, demodulators and spectrum delivery switches are installed in a central station. A spectrum delivery switch controls provide flexible dynamic channel assignment and functions as a hand over algorithm. This control method employs a TDMA time slot switch and a MODEM connection switch. The relation between blocking probability and offered traffic are described and computer simulation results are shown. The results indicate an improvement in this blocking probability over conventional systems.

This paper presents a potential FM double modulation technique for subcarrier optical transmission in order to improve the input dynamic range. The proposed theory of FM double modulation is presented. The BER performance and input dynamic range are shown theoretically and experimentally compared with conventional direct intensity modulation. It was found that the dynamic range could be experimentally improved by 20dB compared with the conventional method by using FM double modulation. The proposed technique achieved an input dynamic range of 60 dB even when using a commercial Fabri-Perot LD.

An optical receiver for hybrid SCM video distribution systems that distribute AM, QAM (quadrature amplitude modulation) and FM TV signals simultaneously is investigated. We propose a novel receiver configuration called the Frequency Division type Receiver (FDR) with consists of a photo detector, filter, and multiple preamplifiers. The receiver is compared with existing receivers in terms of optical sensitivity, distortion characteristics, and configuration simplicity. We clarify that the newly developed FDR type receiver is most suitable for hybrid SCM video distribution systems.

This paper describes the performance of AlGaAs/GaAs HBT's developed for power applications. Their applicability to power amplifiers used in digital mobile radio communications is examined through measurement and numerical simulation, considering both power capability and linearity. Power HBT's with carbon-doped base layers showed DC current gains over 90. A linear gain of 19.2 dB, a maximum output RF power of 32.5 dBm, and a power added efficiency of 56 percent were obtained at 950 MHz. Numerical simulations showed that the power efficiency of HBT amplifiers could be improved by using harmonic trap circuits. Intermodulation measurements showed that third-order distortions were at most 21 dBc level at the 1-dB gain compression point. RF spectrum simulations using π/4 shift QPSK modulation showed that side-band spectrum generation was less than 45 dBc level at points 50 kHz off of the carrier frequency. These properties indicate that the power handling capabilities and linearity of HBT amplifiers offer promising potentials for digital mobile radio communications.

We propose a decoding algorithm for the t-EC/AUED code proposed by Böinck and Tiborg. The proposed algorithm also reveals some remarkable properties of the code.

Redundancy is introduced by sampling a bandlimited signal at a higher rate than the Nyquist rate. In the cases of erasures due to fading or jamming, the samples are discarded. Therefore, what we get at the output of the receiver is a set if nonuniform samples obtained from a uniform sampling process with missing samples. As long as the rate of nonuniform samples is higher than the Nyquist rate, the original signal can be recovered with no errors. The sampling theorem can be shown to be equivalent to the fundamental theorem of information theory. This oversampling technique is also equivalent to a convolutional code of infinite constraint length is the Field of real numbers. A DSP implementation of this technique is through the use of a Discrete Fourier Transform (DFT), which happens to be equivalent to block codes in the field of real numbers. An iterative decoder has been proposed for erasure and impulsive noise, which also works with moderate amount of additive random noise. The iterative method is very simple and efficient consisting of modules of Fast Fourier Transforms (FFT) and Inverse FFT's. We also suggest a non-linear iterative method which converges faster than the successive approximation. This iterative decoder can be implemented in a feedback configuration. Besides FFT, other discrete transforms such as Discrete Cosine Transform, Discrete Sine Transform, Discrete Hartley Transform, and Discrete Wavelet Transform are used. The results are comparable to FFT with the advantage of working in the field of real numbers.

This paper proposes a new subscriber distribution method called FTTA (Fiber To The Area), which uses millimeter-wave radio band to connect subscribers with base station and optical fiber to connect base station with control station in order to obtain broad-band transmission. Usually two main causes of signal degradation, i.e., rainfall attenuation on radio channel and intermodulation distortion on optical channel are considered in this system. Taking into considerations of these two factors, we analyze the available capacity of FTTA system for various 22nQAM modulation levels. The analysis clarifies that there exists an optimum modulation level that can maxize the available capacity, and AGC circuit in the base station is useful to compensate the rainfall attenuation. It is shown that 18.0Gbps is available under the optimum modulation method of the 64QAM with AGC and 12.0Gbps under the 16QAM without AGC when 20 carriers are used.

A quantum interconnection scheme by controlling the Coulomb interaction between ballistic electrons is proposed in which 2DEG (2 dimensional electron gas) plays the role of an interconnection medium. This concept brings up new possibilities for the interconnection approach in various fields such as parallel processing, telecommunications switching, and quantum functional devices. Cross-over interconnection, address collision, and address selection in a quantum information network system were analyzed as the first step. The obtained results have shown that the interconnection probability can be controlled by the velocity and timing of the ballistic electron emission from the emitter electrode. The proposed interconnection scheme is expected to open up a new field of quantum effect integrated circuits in the 21st century.

Corresponding to the development of B-ISDN, integrated services for data, voice, etc. are imperatively required for the so called third generation wireless communication networks. In this paper, I-ISMA (Idle Signal Multiple Access for Integrated services) is proposed to transmit integrated voice and data traffic from dispersed terminals to a base station. In the system, data packets and the first packets of talkspurts of conversational speeches are transmitted using ISMA protocol over a shared channel while subsequent packets of talkspurts are sent with time reservation technique. The channel capacity of I-ISMA is evaluated and compared with that of PRMA. The region in which I-ISMA has larger capacity than PRMA is figured out. Generally speaking, I-ISMA has larger capacity than PRMA when the duration for transmitting and detecting an idle signal is not too long and the channel is not too congested by the reserved voice transmissions. When we concern real time voice transmission, delay is one of the most important performance measures. Only is a qualitative discussion on delay performance given here. The quantitative evaluation is obtained by the dynamic analysis in our succeeding paper.

This paper shows that coherent optimization strategies for multilevel systhesis should rely on a good link between the factorization, the technology mapping and the netlist optimization. Factorization options are shown to play a key role. The technology mapping should optimize both area and critical path and only netlist structure preserving" optimization techniques (buffer insertion, gate replication) should be applied first to preserve the factorization decision. Only in a last step resynthesis of critical areas based on a local view is applied. The approach has been experimented on a set of large combinational benchmarks.

This paper reports performance improvement in an optical fiber feeder for microcellular mobile radio systems. A low noise optical receiver using a transformer resonant circuit is described. With this receiver, CNR degradation due to receiver noise is suppressed to less than 0.9dB. Furthermore, two novel techniques, the use of a multiple-LD transmitter and automatic LD input level control, are proposed. The multiple-LD transmitter increases transmitter output power and reduces the transmitter noise. With a dual-LD transmitter, it is possible to increase the optical loss margin by 3.1dB, which corresponds to transmission length expansion of 6.2km, or to improve the received CNR by 2.8dB, which enables communication range expansion. Automatic LD input level control, which optimizes LD input level according to the received radio power, can expand the actual dynamic range of the up link.