A flash analog-to-digital converter (ADC) that uses resonant-tunneling complex gates is proposed. The ternary quantizers, consisting of monostable-to-multistable transition logic (MML) circuits, convert the analog input signal into the ternary thermometer code. This code is then converted into the binary Gray-code output by a multiple-valued multiple-input monostable-bistable transition logic element (M2-MOBILE). By assuming InP-based resonant-tunneling diode (RTD) and heterojunction field-effect transistor technology, we have carried out SPICE simulation that demonstrates a 4-bit, 10-GS/s ADC operation. The input bandwidth, defined as a frequency at which the effective number of bit decreases by 0.5 LSB, was also estimated to be 500 MHz. Compact circuit configuration, which is due to the combination of MML and M2-MOBILE, reduces the device count and power dissipation by a factor of two compared with previous RTD-based ADCs.

We have proposed an intracell uplink of a spread-spectrum code-division multiple-access (SS-CDMA) flexible wireless network based on approximately synchronized (AS) CDMA. Since the AS-CDMA has no co-channel interference, complicated transmission power control (TPC) is not required. A modem of the AS-CDMA has been designed and implemented for the Japanese 2.4 GHz industrial, scientific and medical (ISM) band. Using the implemented modem, the degradation of Eb/N0 from the theoretical limit is 1.0 dB at a bit error rate (BER) of 10-3. Under 2-user environment, the degradation of carrier-to-noise ratio (CNR) is 0.5 dB at a BER of 10-3 when the desired-to-undesired signal ratio (DUR) is -20.3 dB. We have evaluated BER performances in cases of varying carrier frequency offset and median DUR with computer simulation. Under 8-user environment, at the carrier frequency offset of 0.3 ppm, the BER with the DUR of -16 dB is found to be 10-3. Using the AS-CDMA with a 4-step open-loop TPC technique, the design of intracell uplink is available.

A fuzzy-like phenomenon is observed in a chaotic neural network operating as dynamic autoassociative memory. When an external stimulation with properties shared by two stored patterns is applied to the chaotic neural network, the output of the network transits between the two patterns. The ratio of the network visiting two stored patterns is dependent on the ratio of the Hamming distances between the external stimulation and the two stored patterns. This phenomenon is similar to the human decision-making process, which can be described by fuzzy set theory. Here, we analyze the fuzzy-like phenomenon from the viewpoint of the fuzzy set theory.

We present analytical and numerical results on the flux-quantum transitions in a three-junction superconducting quantum interference device (3J-SQUID) controlled by two RF signals. The 3J-SQUID has two superconducting loops, and the RF signals are magnetically coupled to the loops. Flux-quantum transitions in the 3J-SQUID loops can be controlled by utilizing the phase difference of the two RF signals. Under proper conditions, we can obtain a situation where one flux quantum passes through the 3J-SQUID per one cycle of the RF signals without DC current biasing, which results in a zero-crossing step on the current-voltage characteristics. In this paper, we first explain the operation principle by using a quantum state diagram of a 3J-SQUID. Next, we numerically simulate RF-induced transitions of the quantum states. A zero-crossing step on the current-voltage characteristics is demonstrated. We also investigate dependence of zero-crossing steps upon parameters of the 3J-SQUID and RF signals.

The initial phase alternation of RZ pulses having duty cycle beyond 50% in dispersion-managed-link is found to help stabilize DM solitons transmissions. The stable soliton propagation of such wide RZ pulses should ease the difficulties designing soliton-based DWDM systems due to less spectral occupancy/channel. For the proof of concept, 40 Gbit/s WDM transmissions are numerically investigated and the initial phase alternation improved the transmission distance by the factor of 2 in the soliton-soliton interaction limited regime. The advantage of this concept has also been verified by conducting 40 Gbit/s single and 8 channels WDM transmission experiments using OTDM techniques with initial phase alternation.

In order to design oscillators and switches phase noise characteristic is the key to obtain high quality frequency spectrums. Since the phase noise is directly affected by the 1/f noise of transistors in the circuit, 1/f noise measurement and modeling are important. This paper describes 1/f noise measurement, frequency and bias dependent flicker noise model, and noise parameter extraction method of MOSFET's. Also, for MOSFET's geometry dependencies of drain current 1/f noise are analyzed and modeled. The model has been verified by measuring the noise current spectral density of MOSFET's in two different process devices.

This paper develops a simple algorithm for calculating a polynomial curve or surface in a parallel way. The number of arithmetic operations and the necessary time for the calculation are evaluated in terms of polynomial degree and resolution of a curve and the number of processors used. We made some comparisons between our method and a conventional method for generating polynomial curves and surfaces, especially in computation time and approximation error due to the reduction of the polynomial degree. It is shown that our method can perform fast calculation within tolerable error.

The power supply voltage of LSI has been lowered due to system requirements for low power dissipation. An on-chip power-on reset pulse generator (POR-PG) is used to determine the initial state of the memory devices of the system LSI. The requirement for the POR-PG is strict for lower power supply voltage because noise margin is smaller relatively. This paper describes a POR-PG for low power voltage supply (Vdd) which overcomes these problems. Hardware measurement proves improved pulse height relative to various power-on profiles (slope, rise time etc.) and fluctuations of temperature and process. Further, the design provides robust noise immunity against voltage fluctuations on the power supply line. The circuit is implemented within a small area (115 µm 345 µm) in the input/output buffer area of a micro-processor and hard-disk controller integrated LSI with 0.25-µm four-layer-metal CMOS technology.

A Wireless Sensor Network (WSN, for short) is a distributed system consisting of n sensor nodes and a base station. In this paper, we propose an energy-efficient protocol to initialize the sensor nodes in a WSN, that is, to assign a unique ID to each sensor node. We show that if an upper bound u on the number n of sensor nodes is known beforehand, for any f 1 and any small µ (0<µ<1), a WSN without collision detection capability can be initialized in O((log (1/µ) + log f)u1+µ) time slots, with probability exceeding 1-(1/f), with no sensor node being awake for more than O(log (1/µ)+ log f) time slots.

This paper proposes list Viterbi equalizers (LVEs) that use two kinds of metric criteria for wide-spread time-dispersive channels to achieve a good trade-off between complexity and bit error rate (BER) performance. For Viterbi equalization employing a state-reduction algorithm, the modified metric criterion proposed by Ungerboeck is not always equivalent to the squared Euclidean distance metric criterion. This paper proposes the following two schemes for the LVE: (1) to combine two kinds of metric criteria like combining diversity; (2) to select the metric criterion like selection diversity according to the channel impulse response. Finally, computer simulation shows that the proposed schemes improve BER performance on wide-spread frequency selective fading channels, even if the proposed schemes have smaller complexity than the conventional one.

Quantization is an essential step which leads to compression in discrete cosine transform (DCT) domain. In this paper, we show how a statistically non-optimal uniform quantizer can be improved by employing an efficient reconstruction method. For this purpose, we estimate the probability distribution function (PDF) of original DCT coefficients in a decoder. By applying the estimated PDF into the reconstruction process, the dequantization distortion can be reduced. The proposed method can be used practically in any applications where uniform quantizers are used. In particular, it can be used for the quantization scheme of the JPEG and MPEG coding standards.

Methodologies for more efficient Raman amplification and a more suitable modulation format for 40 Gbit/s WDM unrepeatered transmission are investigated. Management of the fiber effective area is proposed to realize low noise distributed Raman amplification. An Aeff management technique in which low-Aeff fiber is located in a median section instead of the last section, was confirmed numerically and experimentally to improve the OSNR and Q-factor. Carrier-suppressed-return-to-zero (CS-RZ) modulation has the advantage of reducing fiber-nonlinearity effects and permitting denser multiplexing of the wavelengths. 40 Gbit/s 32-channel unrepeatered WDM transmission over 202 km was demonstrated employing the proposed methodologies.

In this study, a hybrid genetic algorithm/neural network with fuzzy logic controller (NN-flcGA) is proposed to find the global optimum of reliability assignment/redundant allocation problems which should be simultaneously determined two different types of decision variables. Several researchers have obtained acceptable and satisfactory results using genetic algorithms for optimal reliability assignment/redundant allocation problems during the past decade. For large-size problems, however, genetic algorithms have to enumerate numerous feasible solutions due to the broad continuous search space. Recently, a hybridized GA combined with a neural network technique (NN-hGA) has been proposed to overcome this kind of difficulty. Unfortunately, it requires a high computational cost though NN-hGA leads to a robuster and steadier global optimum irrespective of the various initial conditions of the problems. The efficacy and efficiency of the NN-flcGA is demonstrated by comparing its results with those of other traditional methods in numerical experiments. The essential features of NN-flcGA namely, 1) its combination with a neural network (NN) technique to devise initial values for the GA, 2) its application of the concept of a fuzzy logic controller when tuning strategy GA parameters dynamically, and 3) its incorporation of the revised simplex search method, make it possible not only to improve the quality of solutions but also to reduce computational cost.

This paper describes two kinds of on-chip matched low-noise/driver MMIC amplifiers (LN/D-As) suitable for 2.4-GHz and 5.2-GHz short-range wireless applications. The ICs are fabricated in a 0.18 µm bulk CMOS which has no extra processing steps for enhancing the RF performance. The successful use of the current-reuse topology and interdigitated capacitors (IDCs) enables sufficiently low-noise and high output power operations with low current dissipation despite the chip fabrication in the bulk CMOS leading to large RF substrate and conductor losses. The main measurement results of the two LN/D-As are as follows: a 3.8-dB noise figure (NF) and a 10.1-dB gain under the conditions of 1.8 V and 6 mA, a 3.4-dBm 1-dB gain compressed output power (P1dB) for a 2.4-V voltage supply and a 13-mA operating current for the 2.4-GHz LN/D-A, and a 4.9-dB NF and an 11.1-dB gain with a 1.8 V and 10 mA supply condition, a 2.3-dBm P1dB at 2.4 V and 16 mA for the 5.2-GHz LN/D-A. Both MMICs are suited for low-noise amplifiers and driver amplifiers in 2.4-GHz and 5.2-GHz low-cost, low-power wireless systems such as Bluetooth and hiperLAN.

We achieved a dispersion tolerance of 25-ps/nm at 80-Gbit/s using novel carrier-suppressed return-to-zero (CS-RZ) coding realized by duty ratio and optical multiplexing phase control. We also show that the dispersion tolerance strongly depends on the relative optical phase difference between adjacent time slots, and demonstrate 80-Gbit/s 60-km DSF transmission without dispersion compensation by using a newly-fabricated stable 80-Gbit/s OTDM transmitter.

In this letter, sampling and quantizer design for the Gaussian detection problem are considered. A constraint on the transmission rate from the remote sensor to the optimal discrete detector is assumed. The trade-off between sampling rate and the number of quantization levels is studied and illustrated by means of an example.

A cascode crystal oscillator is widely used for the stable frequency source of mobile communication equipments. Recently, IC production of the cascode crystal oscillator has become necessary. The cascode crystal oscillator is composed of a colpitts crystal oscillator and a cascode connected base-common buffer amplifier. The base bypass condenser prevents the area size reduction. In this paper, we have proposed the new structures of the cascode crystal oscillator suitable for integrated circuits. The proposed circuits have the advantages on reduction of the area size and start-up time without deteriorating the frequency stability against the load impedance variation and other performances. The simulation and experiment have shown the effectiveness of the proposed circuits.

A highly stable oven-controlled crystal oscillator (OCXO) with low phase-noise characteristics has been developed using a dual-mode SC-cut quartz crystal oscillator. The OCXO uses a conventional oven-control system for coarse compensation and a digital-correction system, which uses B-mode signal in an SC-cut resonator as a temperature sensor, for fine compensation. Combining these two forms of compensation greatly improves the stability of the C-mode frequency without requiring a double-oven system. The experimental results indicated that the frequency stability of the proposed OCXO, including the frequency-temperature hysteresis, is ten times better than that of a conventional, free-running OCXO. The results also indicated that the proposed OCXO has good frequency retraceability and low phase-noise characteristics.

Sophisticated and robust resource management is an essential issue in future wireless systems which will provide a variety of application services. In this paper, we employ an adaptive-network-based fuzzy inference system (ANFIS) to control the resource allocation for mobile multimedia networks. ANFIS, possessing the advantages of expert knowledge of fuzzy logic system and learning capability of neural networks, can provide a systematic approach to finding appropriate parameters for the Sugeno fuzzy model. The fuzzy resource allocation controller (FRAC) is designed in a two-layer architecture and selects properly the capacity requirement of new call request, the capacity reservation for future handoffs, and the air interface performance as input linguistic variables. Therefore, the statistical multiplexing gain of mobile multimedia networks can be maximized in the FRAC. Simulation results indicate that the proposed FRAC can keep the handoff call blocking rate low without jeopardizing the new call blocking rate. Also, the FRAC can indeed guarantee quality of service (QoS) contracts and achieve higher system performance according to network dynamics, compared with the guard channel scheme and ExpectedMax strategy.

This paper describes the impact of novel Return-to-Zero (RZ) formas for dense wavelength-division-multiplexing (DWDM) transport systems using 40-Gbit/s channels. The introduction of phase modulation using phase reversal in RZ-signal encoding process dramatically reduces its optical modulation bandwidth and enhances its tolerance against fiber nonlinearities. By using proposed RZ formats, DWDM transmission performance in 40-Gbit/s channels can be enhanced with high spectral efficiency compared with conventional Non-Return-to-Zero (NRZ) and Return-to-Zero (RZ) formats.