As a key technology of 5G, NFV has attracted much attention. In addition, monitoring plays an important role, and can be widely used for virtual network function placement and resource optimisation. The existing monitoring methods focus on the monitoring load without considering they own resources needed. This raises a unique challenge: jointly optimising the NFV monitoring systems and minimising their monitoring load at runtime. The objective is to enhance the gain in real-time monitoring metrics at minimum monitoring costs. In this context, we propose a novel NFV monitoring solution, namely, iMon (Monitoring by inferring), that jointly optimises the monitoring process and reduces resource consumption. We formalise the monitoring process into a multitarget regression problem and propose three regression models. These models are implemented by a deep neural network, and an experimental platform is built to prove their availability and effectiveness. Finally, experiments also show that monitoring resource requirements are reduced, and the monitoring load is just 0.6% of that of the monitoring tool cAdvisor on our dataset.

Crosstalk between lines plays an important role in the transmission of signal. Hence it is of great significance to establish the transmission lines model accurately to evaluate factors affecting crosstalk coupling between lines and to improve the anti-interference capability of the system. As twisted-pair line is widely used for its unique twist structure which improves the anti-interference performance of cables, this paper presents a method of constructing transmission lines model of the shielded twisted-pair line (STP) with two twisted pairs based on S-parameters. Firstly, the transmission lines model of STP with one twisted pair is established. The establishment of distributed capacitance matrix of this model depends on the dielectric constant of insulation layer that surrounds a conductor, but the dielectric constant is often unknown. In this respect, a method to obtain the distributed capacitance matrix based on the S-parameters of this model is proposed. Due to twisting, there is a great deal of variability between the distribution parameters along the length of the STP. As the spatial distribution of conductors in the cross-section of twisted-pair line vary along with the cable length, the distribution parameters matrices also change as they move. The cable is divided into several segments, and the transmission lines model of STP is obtained with the cascade of each segment model. For the STP with two twisted pairs, the crosstalk between pairs is analyzed based on the mixed mode S-parameters. Combined with the transmission lines model of STP with one twisted pair, that of STP with two twisted pairs is obtained. The terminal response voltage can be calculated from the transmission lines model and cable terminal conditions. The validity of the transmission lines model is verified by the consistency between the terminal responses calculated by the model and by the simulated. As the theoretical and simulation results are compatible, the modeling method for the STP with two twisted pairs can be used for the STP with more twisted pairs. In practical engineering application, S-parameters and mixed mode S-parameters can be obtained by testing. That means the transmission lines model of STP can be established based on the test results.

We attempt to design and fabricate of a 4×4 Butler matrix for short-millimeter-wave frequencies by using the microfabrication process for a polytetrafluoroethylene (PTFE) substrate-integrated waveguide (SIW) by the synchrotron radiation (SR) direct etching of PTFE and the addition of a metal film by sputter deposition. First, the dimensions of the PTFE SIW using rectangular through-holes for G-band (140-220 GHz) operation are determined, and a cruciform 90 ° hybrid coupler and an intersection circuit are connected by the PTFE SIW to design the Butler matrix. Then, a trial fabrication is performed. Finally, the validity of the design result and the fabrication process is verified by measuring the radiation pattern.

This paper analyzes a blockchain network forming a directed acyclic graph (DAG), called a DAG-type blockchain, from the viewpoint of graph algorithm theory. To use a DAG-type blockchain, NP-hard graph optimization problems on the DAG are required to be solved. Although various problems for undirected and directed graphs can be efficiently solved by using the notions of graph parameters, these currently known parameters are meaningless for DAGs, which implies that it is hopeless to design efficient algorithms based on the parameters for such problems. In this work, we propose a novel graph parameter for directed graphs called a DAG-pathwidth, which represents the closeness to a directed path. This is an extension of the pathwidth, a well-known graph parameter for undirected graphs. We analyze the features of the DAG-pathwidth and prove that computing the DAG-pathwidth of a DAG (directed graph in general) is NP-complete. Finally, we propose an efficient algorithm for a variant of the maximum k-independent set problem for the DAG-type blockchain when the DAG-pathwidth of the input graph is small.

Calculation is a solitaire card game with a standard 52-card deck. Initially, cards A, 2, 3, and 4 of any suit are laid out as four foundations. The remaining 48 cards are piled up as the stock, and there are four empty tableau piles. The purpose of the game is to move all cards of the stock to foundations. The foundation starting with A is to be built up in sequence from an ace to a king. The other foundations are similarly built up, but by twos, threes, and fours from 2, 3, and 4 until a king is reached. Here, a card of rank i may be used as a card of rank i + 13j for j ∈ {0, 1, 2, 3}. During the game, the player moves (i) the top card of the stock either onto a foundation or to the top of a tableau pile, or (ii) the top card of a tableau pile onto a foundation. We prove that the generalized version of Calculation Solitaire is NP-complete.

In many situations, abnormal sounds, called adventitious sounds, are included with the lung sounds of a subject suffering from pulmonary diseases. Thus, a method to automatically detect abnormal sounds in auscultation was proposed. The acoustic features of normal lung sounds for control subjects and abnormal lung sounds for patients are expressed using hidden markov models (HMMs) to distinguish between normal and abnormal lung sounds. Furthermore, abnormal sounds were detected in a noisy environment, including heart sounds, using a heart-sound model. However, the F1-score obtained in detecting abnormal respiration was low (0.8493). Moreover, the duration and acoustic properties of segments of respiratory, heart, and adventitious sounds varied. In our previous method, the appropriate HMMs for the heart and adventitious sound segments were constructed. Although the properties of the types of adventitious sounds varied, an appropriate topology for each type was not considered. In this study, appropriate HMMs for the segments of each type of adventitious sound and other segments were constructed. The F1-score was increased (0.8726) by selecting a suitable topology for each segment. The results demonstrate the effectiveness of the proposed method.

Multiple wireless communication systems are often operated together in the same area in such manufacturing sites as factories where wideband noise may be emitted from industrial equipment over channels for wireless communication systems. To perform highly reliable wireless communication in such environments, radio wave environments must be monitored that are specific to each manufacturing site to find channels and timing that enable stable communication. The authors studied technologies using machine learning to efficiently analyze a large amount of monitoring data, including signals whose spectrum shape is undefined, such as electromagnetic noise over a wideband. In this paper, we generated common supervised data for multiple sensors by conjointly clustering features after normalizing those calculated in each sensor to recognize the signal reception timing from identical sources and eliminate the complexity of supervised data management. We confirmed our method's effectiveness through signal models and actual data sampled by sensors that we developed.

Self-directed learning in an appropriately designed environment can help learners retain knowledge tied to experience and motivate them to learn more. For teachers, however, it is difficult to design an environment to give to learners and to give feedback that reflects respect for their independent efforts, while for learners, it is difficult to set learning objectives on their own and to construct knowledge correctly based on their own efforts. In this research, we developed a learning support system that provides a mechanism for constructing an observational learning environment using virtual space and that encourages self-directed knowledge discovery. We confirmed that this system contributes to a learner's structural understanding and its retention and to a greater desire to learn at a level comparable to that of concept map creation, another active learning method.

This paper focuses on the potential value and future prospects of using virtual reality (VR) technology in online education. In detailing online education and the latest VR technology, we focus on metaverse construction and artificial intelligence (AI) for educational VR use. In particular, we describe a virtual university campus in which on-demand VR lectures are conducted in virtual lecture halls, automated evaluations of student learning and training using machine learning, and the linking of multiple digital campuses.

Quadrature voltage-controlled oscillators (VCOs) with current-weight-average and voltage-weight-average phase-adjusting architectures are studied. The phase adjusting equalizes the oscillation frequency to the LC-resonant frequency. The merits of the equalization are explained by using Leeson's phase noise equation and the impulse sensitivity function (ISF). Quadrature VCOs with the phase-adjusting architectures are fabricated using 180-nm TSMC CMOS and show low-phase-noise performances compared to a conventional differential VCO. The ISF analysis and small-signal analysis also show that the drawbacks of the current-weight-average phase-adjusting and voltage-weight-average phase-adjusting architectures are current-source noise effect and large additional capacitance, respectively. A voltage-average-adjusting circuit with a source follower at its input alleviates the capacitance increase.

Intelligent reconfigurable surfaces (IRS) have attracted much attention from both industry and academia due to their performance improving capability and low complexity for 6G wireless communication systems. In this letter, we introduce an IRS-assisted space-time line code (STLC) technique. The STLC was introduced as a promising technique to acquire the optimal diversity gain in 1×2 single-input multiple-output (SIMO) channel without channel state information at receiver (CSIR). Using the cosine similarity theorem, we propose a novel phase-steering technique for the proposed IRS-assisted STLC technique. We also mathematically characterize the proposed IRS-assisted STLC technique in terms of outage probability and bit-error rate (BER). Based on computer simulations, it is shown that the results of analysis shows well match with the computer simulation results for various communication scenarios.

This study examined whether distance learning in a first-year PBL courses in the first unit of instruction improves the effectiveness of subsequent group work learning over face-to-face learning. The first-year PBL consisted of three units: an input unit, a group work unit and an outcomes presentation unit. In 2017/2018, the input unit was conducted in the classroom with face-to-face learning. In 2017, a workshop was held in addition to face-to-face learning in classroom. In 2020/2021, the input unit was conducted with distance learning. In the years, approximately 100 people completed the questionnaire. A preliminary check confirmed that the average score of students' self-assessment of their own social skills were not significantly different among the four years. Analysis showed that in 2018, the perceived efficacy in the group work unit depended on learners' high social skills. Alternatively, in 2017/2020/2021, the perceived efficacy in group work was not dependent on learners' social skills. This suggests that distance learning and face-to-face learning with workshop learning, instead of full face-to-face learning for the units placed before the group work unit facilitates the learning efficacy of the group work unit, even for students with social skill concerns.

This study proposes a new structure of a single-shunt rectifier circuit that can reduce circuit loss and improve efficiency over the conventional structure. The proposed structure can provide impedance matching to the measurement system (or receiving antenna) without the use of conventional matching circuits, such as stubs and tapers. The proposed structure can simultaneously perform full-wave rectification and impedance matching by placing a feeding point on the output filter's λ/4 transmission line. We use circuit simulation to compare the RF-DC conversion efficiency and circuit loss of the conventional and proposed structures. The simulation results show that the proposed structure has lower circuit loss and higher RF-DC conversion efficiency than the conventional structure. We fabricate the proposed rectifier circuit using a GaAs Schottky barrier diode. The simulation and measurement results show that the single-shunt rectifier circuit's proposed structure is capable of rectification and impedance matching. The fabricated rectifier circuit's RF-DC conversion efficiency reaches a maximum of 91.0%. This RF-DC conversion efficiency is a world record for 920-MHz band rectifier circuits.

Defect prediction approaches have been greatly contributing to software quality assurance activities such as code review or unit testing. Just-in-time defect prediction approaches are developed to predict whether a commit is a defect-inducing commit or not. Prior research has shown that commit-level prediction is not enough in terms of effort, and a defective commit may contain both defective and non-defective files. As the defect prediction community is promoting fine-grained granularity prediction approaches, we propose our novel class-level prediction, which is finer-grained than the file-level prediction, based on the files of the commits in this research. We designed our model for Python projects and tested it with ten open-source Python projects. We performed our experiment with two settings: setting with product metrics only and setting with product metrics plus commit information. Our investigation was conducted with three different classifiers and two validation strategies. We found that our model developed by random forest classifier performs the best, and commit information contributes significantly to the product metrics in 10-fold cross-validation. We also created a commit-based file-level prediction for the Python files which do not have the classes. The file-level model also showed a similar condition as the class-level model. However, the results showed a massive deviation in time-series validation for both levels and the challenge of predicting Python classes and files in a realistic scenario.

Mixed-Polarity Multiple-Control Toffoli (MPMCT) gates are generally used to implement large control logic functions for quantum computation. A logic circuit consisting of MPMCT gates needs to be mapped to a quantum computing device that invariably has a physical limitation, which means we need to (1) decompose the MPMCT gates into one- or two-qubit gates, and then (2) insert SWAP gates so that all the gates can be performed on Nearest Neighbor Architectures (NNAs). Up to date, the above two processes have only been studied independently. In this work, we investigate that the total number of gates in a circuit can be decreased if the above two processes are considered simultaneously as a single step. We developed a method that inserts SWAP gates while decomposing MPMCT gates unlike most of the existing methods. Also, we consider the effect on the latter part of a circuit carefully by considering the qubit placement when decomposing an MPMCT gate. Experimental results demonstrate the effectiveness of our method.

In this paper, we propose a combined method of GCR Block Ack and Unsolicited Retry for binary data lossless groupcast over wireless LANs. The two mechanisms are standardized as IEEE 802.11aa GCR for audiovisual transmission. In the proposed method, the sender transmits each frame twice without acknowledgment as Unsolicited Retry under lossy wireless link conditions. After transmitting twice, the sender enters the Block Ack sequence. In addition, we apply TXOP-Bursting, which allows a terminal to send frames sequentially with high priority during the TXOP limit, to the combined method. To show the proposal's effectiveness, we carry out a computer simulation. We assume binary data transmission of about 40MB and assess the time of complete reception at all the receivers. From the result, we find that the proposed method can shorten the received time against the conventional Block Ack method.

Locally repairable codes have attracted lots of interest in Distributed Storage Systems. If a symbol of a code can be repaired respectively by t disjoint groups of other symbols, each groups has size at most r, we say that the code symbol has (r, t)-locality. In this paper, we employ parity-check matrix to construct information single-parity (r, t)-locality LRCs. All our codes attain the Singleton-like bound of LRCs where each repair group contains a single parity symbol and thus are optimal.

This paper proposes a robust optimization model for probabilistic protection under uncertain capacity demands to minimize the total required capacity against multiple simultaneous failures of physical machines. The proposed model determines both primary and backup virtual machine allocations simultaneously under the probabilistic protection guarantee. To express the uncertainty of capacity demands, we introduce an uncertainty set that considers the upper bound of the total demand and the upper and lower bounds of each demand. The robust optimization technique is applied to the optimization model to deal with two uncertainties: failure event and capacity demand. With this technique, the model is formulated as a mixed integer linear programming (MILP) problem. To solve larger sized problems, a simulated annealing (SA) heuristic is introduced. In SA, we obtain the capacity demands by solving maximum flow problems. Numerical results show that our proposed model reduces the total required capacity compared with the conventional model by determining both primary and backup virtual machine allocations simultaneously. We also compare the results of MILP, SA, and a baseline greedy algorithm. For a larger sized problem, we obtain approximate solutions in a practical time by using SA and the greedy algorithm.

This paper proposes a design of high-speed interconnection between optical modules and electrical modules via bonding-wires and coplanar waveguide transmission lines on printed circuit boards for 400 Gbps 4-channel optical communication systems. In order to broaden the interconnection bandwidth, interdigitated capacitors were integrated with GSG pads on chip for the first time. Simulation results indicate the reflection coefficient is below -10 dB from DC to 53 GHz and the insertion loss is below 1 dB from DC to 45 GHz. Both indicators show that the proposed interconnection structure can effectively satisfy the communication bandwidth requirements of 100-Gbps or even higher data-rate PAM4 signals.

Recently, Linux Container has been the de-facto standard for a cloud system, enabling cloud providers to create a virtual environment in a much more scaled manner. However, configuring container networks remains immature and requires automatic verification for efficient cloud management. We propose Verikube, which utilizes a novel graph structure representing policies to reduce memory consumption and accelerate verification. Moreover, unlike existing works, Verikube is compatible with the complex semantics of Cilium Policy which a cloud adopts from its advantage of performance. Our evaluation results show that Verikube performs at least seven times better for memory efficiency, at least 1.5 times faster for data structure management, and 20K times better for verification.