In this paper, user set selection in the allocation sequences of round-robin (RR) scheduling for distributed antenna transmission with block diagonalization (BD) pre-coding is proposed. In prior research, the initial phase selection of user equipment allocation sequences in RR scheduling has been investigated. The performance of the proposed RR scheduling is inferior to that of proportional fair (PF) scheduling under severe intra-cell interference. In this paper, the multi-input multi-output technology with BD pre-coding is applied. Furthermore, the user equipment (UE) sets in the allocation sequences are eliminated with reinforcement learning. After the modification of a RR allocation sequence, no estimated throughput calculation for UE set selection is required. Numerical results obtained through computer simulation show that the maximum selection, one of the criteria for initial phase selection, outperforms the weighted PF scheduling in a restricted realm in terms of the computational complexity, fairness, and throughput.

Hardware oriented security and trust of semiconductor integrated circuit (IC) chips have been highly demanded. This paper outlines the requirements and recent developments in circuits and packaging systems of IC chips for security applications, with the particular emphasis on protections against physical implementation attacks. Power side channels are of undesired presence to crypto circuits once a crypto algorithm is implemented in Silicon, over power delivery networks (PDNs) on the frontside of a chip or even through the backside of a Si substrate, in the form of power voltage variation and electromagnetic wave emanation. Preventive measures have been exploited with circuit design and packaging technologies, and partly demonstrated with Si test vehicles.

This paper describes an in-depth analysis of crosstalk in a high-bandwidth 3D-stacked memory using a multi-hop inductive coupling interface and proposes two countermeasures. This work analyzes the crosstalk among seven stacked chips using a 3D electromagnetic (EM) simulator. The detailed analysis reveals two main crosstalk sources: concentric coils and adjacent coils. To suppress these crosstalks, this paper proposes two corresponding countermeasures: shorted coils and 8-shaped coils. The combination of these coils improves area efficiency by a factor of 4 in simulation. The proposed methods enable an area-efficient inductive coupling interface for high-bandwidth stacked memory.

We propose a radio-over-fiber (RoF) system with 1-bit outphasing modulation. The proposed RoF system does not require a power-hungry digital-to-analog converter in access points and relaxes the operation speed of optical transceivers to reduce device cost. We introduce two configurations to enable 1-bit outphasing modulation in our system; mixed-signal and all-digital configurations. In the mixed-signal configuration, the effects of harmonics and phase/amplitude mismatch on the adjacent channel leakage ratio (ACLR) were analyzed through simulation, and wideband transmission with a signal bandwidth of 400 MHz was experimentally verified, complying with the 3rd Generation Partnership Project (3GPP) standard for millimeter-wave band. Moreover, wide-band transmission with a signal bandwidth of 1 GHz was also experimentally verified for beyond-5G and 6G. The all-digital configuration can be implemented in a standard digital design flow. This configuration was also verified to comply with the 3GPP standard by properly selecting the intermediate and sampling frequencies to mitigate the effects of folded harmonics and quantization noise. Finally, the proposed RoF system with both configurations has been shown to have a higher bandwidth efficiency compared with other systems complying with the 3GPP standard for the ACLR. Therefore, the proposed RoF system provides a cost-effective in-building wireless solution for 5G and 6G mobile network systems.

This paper presents a hippocampal cognitive prosthesis chip designed for restoring the ability to form new long-term memories due to hippocampal system damage. The system-on-chip (SOC) consists of a 16-channel micro-power low-noise amplifier (LNA), high-pass filters, analog-digital converters (ADCs), a 16-channel spike-sorter, a generalized Laguerre-Volterra model multi-input, multi-output (GLVM-MIMO) hippocampal processor, an 8-channel neural stimulator and peripheral circuits. The proposed LNA achieved a voltage gain of 50dB, input-referred noise of 3.95µVrms, and noise efficiency factor (NEF) of 3.45 with the power consumption of 3.3µW. High-pass filters with a 300-Hz bandwidth are used to filter out the unwanted local field potential (LFP). 4 12-bit successive approximation register (SAR) ADCs with a signal-to-noise-and-distortion ratio (SNDR) of 63.37dB are designed for the digitization of the neural signals. A 16-channel spike-sorter has been integrated in the chip enabling a detection accuracy of 98.3% and a classification accuracy of 93.4% with power consumption of 19µW/ch. The MIMO hippocampal model processor predict output spatio-temporal patterns in CA1 according to the recorded input spatio-temporal patterns in CA3. The neural stimulator performs bipolar, symmetrical charge-balanced stimulation with a maximum current of 310µA, triggered by the processor output. The chip has been fabricated in 40nm standard CMOS technology, occupying a silicon area of 3mm2.

This study proposes a low-complexity permittivity estimation for ground penetrating radar applications based on a contrast source inversion (CSI) approach, assuming multilayered ground media. The homogeneity assumption for each background layer is used to address the ill-posed condition while maintaining accuracy for permittivity reconstruction, significantly reducing the number of unknowns. Using an appropriate initial guess for each layer, the post-CSI approach also provides the dielectric profile of a buried object. The finite difference time domain numerical tests show that the proposed approach significantly enhances reconstruction accuracy for buried objects compared with the traditional CSI approach.

In CRYPTO 2019, Gohr first introduced the deep learning method to cryptanalysis for SPECK32/64. A differential-neural distinguisher was obtained using ResNet neural network. Zhang et al. used multiple parallel convolutional layers with different kernel sizes to capture information from multiple dimensions, thus improving the accuracy or obtaining a more round of distinguisher for SPECK32/64 and SIMON32/64. Inspired by Zhang's work, we apply the network structure to other ciphers. We not only improve the accuracy of the distinguisher, but also increase the number of rounds of the distinguisher, that is, distinguish more rounds of ciphertext and random number for DES, Chaskey and PRESENT.

Since the dark channel prior (DCP)-based dehazing method is ineffective in the sky area and will cause the problem of too dark and color distortion of the image, we propose a novel dehazing method based on sky area segmentation and image fusion. We first segment the image according to the characteristics of the sky area and non-sky area of the image, then estimate the atmospheric light and transmission map according to the DCP and correct them, and then fuse the original image after the contrast adaptive histogram equalization to improve the details information of the image. Experiments illustrate that our method performs well in dehazing and can reduce image distortion.

Single image deraining is an ill-posed problem which also has been a long-standing issue. In past few years, convolutional neural network (CNN) methods almost dominated the computer vision and achieved considerable success in image deraining. Recently the Swin Transformer-based model also showed impressive performance, even surpassed the CNN-based methods and became the state-of-the-art on high-level vision tasks. Therefore, we attempt to introduce Swin Transformer to deraining tasks. In this paper, we propose a deraining model with two sub-networks. The first sub-network includes two branches. Rain Recognition Network is a Unet with the Swin Transformer layer, which works as preliminarily restoring the background especially for the location where rain streaks appear. Detail Complement Network can extract the background detail beneath the rain streak. The second sub-network which called Refine-Unet utilizes the output of the previous one to further restore the image. Through experiments, our network achieves improvements on single image deraining compared with the previous Transformer research.

The application of time-series prediction is very extensive, and it is an important problem across many fields, such as stock prediction, sales prediction, and loan prediction and so on, which play a great value in production and life. It requires that the model can effectively capture the long-term feature dependence between the output and input. Recent studies show that Transformer can improve the prediction ability of time-series. However, Transformer has some problems that make it unable to be directly applied to time-series prediction, such as: (1) Local agnosticism: Self-attention in Transformer is not sensitive to short-term feature dependence, which leads to model anomalies in time-series; (2) Memory bottleneck: The spatial complexity of regular transformation increases twice with the sequence length, making direct modeling of long time-series infeasible. In order to solve these problems, this paper designs an efficient model for long time-series prediction. It is a double pyramid bidirectional feature fusion mechanism network with parallel Temporal Convolution Network (TCN) and FastFormer. This network structure can combine the time series fine-grained information captured by the Temporal Convolution Network with the global interactive information captured by FastFormer, it can well handle the time series prediction problem.

In the massive machine-type communication scenario, aiming at the problems of active user detection and channel estimation in the grant-free non-orthogonal multiple access (NOMA) system, new sets of non-orthogonal spreading sequences are proposed by using the zero/low correlation zone sequence set with low correlation among multiple sets. The simulation results show that the resulting sequence set has low coherence, which presents reliable performance for channel estimation and active user detection based on compressed sensing. Compared with the traditional Zadoff-Chu (ZC) sequences, the new non-orthogonal spreading sequences have more flexible lengths, and lower peak-to-average power ratio (PAPR) and smaller alphabet size. Consequently, these sequences will effectively solve the problem of high PAPR of time domain signals and are more suitable for low-cost devices in massive machine-type communication.

Our group has developed terahertz(THz)-waves emitting devices utilizing single crystals of high temperature superconductor Bi2Sr2CaCu2O8+δ (Bi2212). The working principle of the device is based on the AC Josephson effect which is originated in the intrinsic Josephson junctions (IJJs) constructed in Bi2212 single crystals. In principle, based on the superconducting gap of the compound and the AC Josephson effect, the emission frequency range from 0.1 to 15 THz can be generated by simply adjusting bias voltages to the IJJs. In order to improve the device performances, we have performed continuous improvement to the device structures. In this paper, we present our recent approaches to high performance Bi2212 THz-waves emitters. Firstly, approaches to the reduction of self Joule heating of the devices is described. In virtue of improved device structures using Bi2212 crystal chips, the device characteristics, such as the radiation frequency and the output power, become better than previous structures. Secondly, developments of THz-waves emitting devices using IJJs-mesas coupled with external structures are explained. The results clearly indicate that the external structures are very useful not only to obtain desired radiation frequencies higher than 1 THz but also to control radiation frequency characteristics. Finally, approaches to further understanding of the spontaneous synchronization of IJJs is presented. The device characteristics obtained through the approaches would play important roles in future developments of THz-waves emitting devices by use of Bi2212 single crystals.

Uncovered muck truck detection aims to detect the muck truck and distinguish whether it is covered or not by dust-proof net to trace the source of pollution. Unlike traditional detection problem, recalling all uncovered trucks is more important than accurate locating for pollution traceability. When two objects are very close in an image, the occluded object may not be recalled because the non-maximum suppression (NMS) algorithm can remove the overlapped proposal. To address this issue, we propose a Location First NMS method to match the ground truth boxes and predicted boxes by position rather than class identifier (ID) in the training stage. Firstly, a box matching method is introduced to re-assign the predicted box ID using the closest ground truth one, which can avoid object missing when the IoU of two proposals is greater than the threshold. Secondly, we design a loss function to adapt the proposed algorithm. Thirdly, a uncovered muck truck detection system is designed using the method in a real scene. Experiment results show the effectiveness of the proposed method.

In this paper, we present a novel discriminative dictionary learning (DDL) method for image classification. The local structural relationship between samples is first built by the Laplacian eigenmaps (LE), and then integrated into the basic DDL frame to suppress inter-class ambiguity in the feature space. Moreover, in order to improve the discriminative ability of the dictionary, the category label information of training samples is formulated into the objective function of dictionary learning by considering the discriminative promotion term. Thus, the data points of original samples are transformed into a new feature space, in which the points from different categories are expected to be far apart. The test results based on the real dataset indicate the effectiveness of this method.

Underwater acoustic channels (UWA) are usually sparse, which can be exploited for adaptive equalization to improve the system performance. For the shallow UWA channels, based on the proportional minimum symbol error rate (PMSER) criterion, the adaptive equalization framework requires the sparsity selection. Since the sparsity of the L0 norm is stronger than that of the L1, we choose it to achieve better convergence. However, because the L0 norm leads to NP-hard problems, it is difficult to find an efficient solution. In order to solve this problem, we choose the Gaussian function to approximate the L0 norm. Simulation results show that the proposed scheme obtains better performance than the L1 based counterpart.

This letter simplifies and analyze existing state evolution recursions for conjugate gradient. The proposed simplification reduces the complexity for solving the recursions from cubic order to square order in the total number of iterations. The simplified recursions are still catastrophically sensitive to numerical errors, so that arbitrary-precision arithmetic is used for accurate evaluation of the recursions.

We propose a non-photorealistic rendering method to automatically generate reaction-diffusion-pattern-like images from photographic images. The proposed method uses smoothing filter with a circular window, and changes the size of the circular window depending on the position in photographic images. By partially changing the size of the circular window, the size of reaction-diffusion patterns can be changed partially. To verify the effectiveness of the proposed method, experiments were conducted to apply the proposed method to various photographic images.

In this paper, we propose a heuristic planning method to efficiently accommodate dynamic multilayer path (MLP) demand in multilayer networks consisting of a Time Division Multiplexing (TDM) layer and a Wavelength Division Multiplexing (WDM) layer; the goal is to achieve the flexible accommodation of increasing capacity and diversifying path demands. In addition to the grooming of links at the TDM layer and the route and frequency slots for the elastic optical path to be established, MLP requires the selection of an appropriate operational mode, consisting of a combination of modulation formats and symbol rates supported by digital coherent transceivers. Our proposed MLP planning method defines a planning policy for each of these parameters and embeds the values calculated by combining these policies in an auxiliary graph, which allows the planning parameters to be calculated for MLP demand requirements in a single step. Simulations reveal that the choice of operational mode significantly reduces the blocking probability and demonstrate that the edge weights in the auxiliary graph allow MLP planning with characteristics tailored to MLP demand and network requirements. Furthermore, we quantitatively evaluate the impact of each planning policy on the MLP planning results.

This paper proposes a method in calculating the field distribution of the cross section in a transverse electromagnetic (TEM) cell based on the method of finite difference. Besides, E-field uniformity of the cross section is analyzed with the calculation results and the measured field strength. Analysis indicates that theoretical calculation via method proposed in this paper can guide the setup of E-field probes to some extent when it comes to the E-field uniformity analysis in a TEM cell.

BLS signature is an elliptic curve cryptography with an attractive feature that signatures can be aggregated and shortened. We have designed two ASIC architectures for hashing to the elliptic curve and pairing to minimize the latency. Also, the designs are optimized for BLS12-381, a relatively new and safe curve.