We have investigated PtHf silicide formation utilizing a developed PtHf-alloy target to realize low contact resistivity for the first time. A 20 nm-thick PtHf-alloy thin film was deposited on the n-Si(100) by RF magnetron sputtering at room temperature. Then, silicidation was carried out by rapid thermal annealing (RTA) system at 450-600°C/5 min in N2/4.9%H2 ambient. The PtHf-alloy silcide, PtHfSi, layers were successfully formed, and the Schottky barrier height (SBH) for electron of 0.45 eV was obtained by 450°C silicidation. Furthermore, low contact resistivity was achieved for fabricated PtHSi such as 8.4x10-8 Ωcm2 evaluated by cross-bridge Kelvin resistor (CBKR) method.

In this paper, we exploit MapReduce framework and other optimizations to improve the performance of hash join algorithms on multi-core CPUs, including No partition hash join and partition hash join. We first implement hash join algorithms with a shared-memory MapReduce model on multi-core CPUs, including partition phase, build phase, and probe phase. Then we design an improved cuckoo hash table for our hash join, which consists of a cuckoo hash table and a chained hash table. Based on our implementation, we also propose two optimizations, one for the usage of SIMD instructions, and the other for partition phase. Through experimental result and analysis, we finally find that the partition hash join often outperforms the No partition hash join, and our hash join algorithm is faster than previous work by an average of 30%.

This paper presents the design of a multiple-standard 1080 high definition (HD) video decoder on a mixed-grained reconfigurable computing platform integrating coarse-grained reconfigurable processing units (RPUs) and FPGAs. The proposed RPU, including 16×16 multi-functional processing elements (PEs), is used to accelerate compute-intensive tasks in the video decoding. A soft-core-based microprocessor array is implemented on the FPGA and adopted to speed-up the dynamic reconfiguration of the RPU. Furthermore, a mail-box-based communication scheme is utilized to improve the communication efficiency between RPUs and FPGAs. By exploiting dynamic reconfiguration of the RPUs and static reconfiguration of the FPGAs, the proposed platform achieves scalable performances and cost trade-offs to support a variety of video coding standards, including MPEG-2, AVS, H.264, and HEVC. The measured results show that the proposed platform can support H.264 1080 HD video streams at up to 57 frames per second (fps) and HEVC 1080 HD video streams at up to 52fps under 250MHz, at the same time, it achieves a 3.6× performance gain over an industrial coarse-grained reconfigurable processor for H.264 decoding, and a 6.43× performance boosts over a general purpose processor based implementation for HEVC decoding.

In this paper, we propose a channel-unaware algorithm to suppress the narrowband interference (NBI) for the time synchronization, where multiple antennas are equipped at the receiver. Based on the fact that the characteristics of synchronization signal are different from those of NBI in both the time and spatial domain, the proposed algorithm suppresses the NBI by utilizing the multiple receive antennas in the eigen domain of NBI, where the eigen domain is obtained from the time domain statistical information of NBI. Because time synchronization involves incoherent detection, the proposed algorithm does not use the desired channel information, which is different from the eigen domain interference rejection combining (E-IRC). Simulation results show, compared with the traditional frequency domain NBI suppression technique, the proposed algorithm has about a 2 dB gain under the same probability of detection.

Radio over Fiber (RoF) is a promising solution for providing wireless access services. Heterogeneous radio signals are transferred via an optical fiber link using an analog transmission technique. When the RoF and the radio frequency (RF) devices have a nonlinear characteristic, these will create the intermodulation products (IMPs) in the system and generate the intermodulation distortion (IMD). In this paper, the IMD interference in the uplink RF signals from the coupling effect between the downlink and the uplink antennas has been addressed. We propose a method using the dynamic channel allocation (DCA) algorithm with the predistortion (PD) technique to improve the throughput performance of the multi-channel RoF system. The carrier to distortion plus noise power ratio (CDNR) is evaluated for all channel allocation combinations; then the best channel combination is assigned as a set of active channels to minimize the effect of IMD. The results show that the DCA with PD has the lowest IMD and obtains a better throughput performance.

Content centric network (CCN) is conceived as a good candidate for a futuristic Internet paradigm due to its simple and robust communication mechanism. By directly applying the CCN paradigm in wireless multihop mobile ad hoc networks, we experience various kind of issues such as packet flooding, data redundancy, packet collisions, and retransmissions etc., due to the broadcast nature of the wireless channel. To cope with the problems, in this study, we propose a novel location-aware forwarding and caching scheme for CCN-based mobile ad hoc networks. Extensive simulations are performed by using simulator, named ndnSIM. Experiment results show that proposed scheme does better as compared to other schemes in terms of content retrieval time and the number of Interest retransmissions triggered in the network.

These days, in addition to host-to-host communication, Information-Centric Network (ICN) has emerged to reflect current content-centric network usage, based on the fact that many users are now interested not in where contents are but in acquired contents themselves. However, current IP network must still remain, at least from deployment perspective, as one of near future network architectures. This is because ICN has various scalability and feasibility challenges, and host-to-host communication is also diffused like remote login, VoIP, and so on. Therefore, the authors aim to establish the feature of ICN on conventional IP network to achieve feasible and efficient architecture. We consider that, as a feasible and efficient architecture, only user-edges keep some contents' caches within their computational and bandwidth limitations and contents should be replicated also on some replica servers dispersedly to assure contents' distribution even if user caches are not found. To achieve this, in this paper, we propose to operate Content Delivery Network (CDN) and Breadcrumbs (BC) frameworks coordinately on IP network. Both CDN and BC are important as a content-centric technique. In CDN, replica servers called surrogates are placed dispersedly in all over the Internet. Although this provides users with contents from nearer surrogate servers, the surrogate servers have higher workload to distribute contents to many users. In the proposed method, in cooperation with BC method that is proposed to implement ICN on IP network, the surrogate server workload is drastically reduced without largely increasing hop count for content delivery. Although it needs some functions to implement our approach such as adopting BC architecture to routers, calculating and reporting information required for cooperation of BC method with CDN, the cost for the functions in our solution is not so significant. Finally, we evaluate the proposed method with CDN we carefully modeled through simulation.

Content oriented network is expected to be one of the most promising approaches for resolving design concept difference between content oriented network services and location oriented architecture of current network infrastructure. There have been proposed several content oriented network architectures, but research efforts for content oriented networks have just started and technical issues to be resolved are still remained. Because of content oriented feature, content data transmitted in a network can be reused by content requests from other users. Pervasive cache is one of the most important benefits brought by the content oriented network architecture, which forms interconnected caching networks. Caching network is the hottest research area and lots of research activities have been published. This paper surveys recent research activities for caching networks in content oriented networks, with focusing on important factors which affect caching network performance, i.e. content request routing, caching decision, and replacement policy of cache. And this paper also discusses future direction of caching network researches.

This paper proposes a new class of Hilbert pairs of almost symmetric orthogonal wavelet bases. For two wavelet bases to form a Hilbert pair, the corresponding scaling lowpass filters are required to satisfy the half-sample delay condition. In this paper, we design simultaneously two scaling lowpass filters with the arbitrarily specified flat group delay responses at ω=0, which satisfy the half-sample delay condition. In addition to specifying the number of vanishing moments, we apply the Remez exchange algorithm to minimize the difference of frequency responses between two scaling lowpass filters, in order to improve the analyticity of complex wavelets. The equiripple behavior of the error function can be obtained through a few iterations. Therefore, the resulting complex wavelets are orthogonal and almost symmetric, and have the improved analyticity. Finally, some examples are presented to demonstrate the effectiveness of the proposed design method.

We developed a 300-GHz high gain amplifier MMIC in 75-nm InP high electron mobility transistor technology. We approached the issues with accurate characterization of devices to design the amplifier. The on-wafer through-reflect-line calibration technique was used to obtain accurate transistor characteristics. To increase measurement accuracy, a highly isolated structure was used for on-wafer calibration standards. The common source amplifier topology was used for achieving high gain amplification. The implemented amplifier MMIC exhibited a gain of over 25 dB in the 280-310-GHz frequency band.

This paper investigates current-gain and high-frequency characteristics of double heterojunction bipolar transistors (DHBTs) with a uniform GaAsSb, compositionally graded GaAsSb, uniform InGaAsSb, or compositionally graded InGaAsSb base. DHBTs with a compositionally graded InGaAsSb base exhibit a high current gain of ∼75 and fT=504GHz. In order to boost fmax of DHBTs with a compositionally graded InGaAsSb base, a highly doped GaAsSb base contact layer is inserted. The fabricated DHBTs exhibit fT/fmax=513/637GHz and a breakdown voltage of 5.2V.

In this work, the bias polarity dependent resistive switching behaviors in Cu/Si3N4/p+ Si RRAM memory cell have been closely studied. Different switching characteristics in both unipolar and bipolar modes after the positive forming are investigated. The bipolar switching did not need a forming process and showed better characteristics including endurance cycling, uniformity of switching parameters, and on/off resistance ratio. Also, the resistive switching characteristics by both positive and negative forming switching are compared. It has been confirmed that both unipolar and bipolar modes after the negative forming exhibits inferior resistive switching performances due to high forming voltage and current.

Layout strategies including source edge to substrate space (SESS) and inserted substrate-pick stripes of gate-grounded NMOS(ggNMOS) are optimized in this work for on-chip electrostatic discharge (ESD) protection. In order to fully investigate influences of substrate resistors on triggering and conduction behaviors of ggNMOS, various devices are designed and fabricated in a 65-nm CMOS process. Direct current (DC), transmission-line-pulsing (TLP), human body model (HBM) and very-fast TLP (VF-TLP) tests are executed to fully characterize performance of fabricated ggNMOS. Test results reveal that an enlarged SESS parameter results in an earlier triggering behavior of ggNMOS, which presents a layout option for subtle adjustable triggering behaviors. Besides, inserted substrate-pick stripes are proved to have a bell-shape influence on the ESD robustness of ggNMOS and this bell-shape influence is valid in TLP, HBM and VF-TLP tests. Moreover, the most ESD-robust ggNMOS optimized under different inserted substrate-pick stripes always achieves a higher HBM level over the traditional ggNMOS at each concerned total device-width. Physical mechanisms of test results will be deeply discussed in this work.

In recent years, the need to build solid state drive (SSD)-based cloud storage systems has been increasing in order to process the big data generated by lots of Internet of Things devices and Internet users. Because these kinds of cloud systems require high performance and reliable storage, the use of flash-based Redundant Array of Independent Disks (RAID) will increase. But in flash-based RAID storage, parity data must be updated with every data write operation, which can more quickly overwhelm SSD's lifespan. To solve this problem, this letter proposes parity data deduplication for OpenStack cloud storage systems using an all flash array. Unlike the traditional data deduplication method, it only removes parity data, which will be stored in the parity disks of the all flash array. Experiments show that the proposed parity data deduplication method can efficiently reduce the number of parity data write operations, compared to the traditional data deduplication method.

In this study, we investigated Si(100), Si(110) and Si(111) surface flattening process utilizing sacrificial oxidation method, and its effect on Metal-Insulator-Semiconductor (MIS) diode characteristics. By the etching of the 100 nm-thick sacrificial oxide formed by thermal oxidation at 1100°C, the surface roughness of Si(100), Si(110) and Si(111) substrates were reduced. The obtained Root-Mean-Square (RMS) roughness of Si(100) was reduced from 0.22 nm (as-cleaned) to 0.07 nm (after etching), while it was reduced from 0.23 nm to 0.12 nm in the case of Si(110), and from 0.23 nm to 0.11 nm in the case of Si(111), respectively. Furthermore, it was found that time-dependent dielectric breakdown (TDDB) characteristics of MIS diodes for p-Si(100), p-Si(110) and p-Si(111) were improved with the reduction of Si surface RMS roughness.

An application of laser annealing process, which is used to form the P-type Base junction for high-performance low-voltage power MOSFETs (Metal Oxide Semiconductor Field Effect Transistors), is proposed. An equivalent shallow-junction structure for P-Base junction with uniform impurity distribution is achieved by adopting green laser annealing of pulsed mode. Higher impurity activation for the shallow junction has been achieved by the laser annealing of melted phase than by conventional RTA (Rapid Thermal Annealing) of solid phase. The application of the laser annealing technology in the fabrication process of Low-Voltage U-MOSFET is also examined.

In order to minimize packet error rate in extremely dynamic vehicular networks, a novel vehicle to vehicle (V2V) mobile content transmission scheme that jointly employs random network coding and shuffling/scattering techniques is proposed in this paper. The proposed scheme consists of 3 steps: Step 1-The original mobile content data consisting of several packets is encoded to generate encoded blocks using random network coding for efficient error recovery. Step 2-The encoded blocks are shuffled for averaging the error rate among the encoded blocks. Step 3-The shuffled blocks are scattered at different vehicle locations to overcome the estimation error of optimum transmission location. Applying the proposed scheme in vehicular networks can yield error free transmission with high efficiency. Our simulation results corroborate that the proposed scheme significantly improves the packet error rate performance in high mobility environments. Thanks to the flexibility of network coding, the proposed scheme can be designed as a separate module in the physical layer of various wireless access technologies.

Named Data Networking (NDN) is a proposed future Internet architecture that shifts the fundamental abstraction of the network from host-to-host communication to request-response for named, signed data-an information dissemination focused approach. This paper describes a general design for receiver-driven, real-time streaming data (RTSD) applications over the current NDN implementation that aims to take advantage of the architecture's unique affordances. It is based on experimental development and testing of running code for real-time video conferencing, a positional tracking system for interactive multimedia, and a distributed control system for live performance. The design includes initial approaches to minimizing latency, managing buffer size and Interest retransmission, and adapting retrieval to maximize bandwidth and control congestion. Initial implementations of these approaches are evaluated for functionality and performance results, and the potential for future research in this area, and improved performance as new features of the architecture become available, is discussed.

On SNS (Social Networking Services), detecting Sybils is an urgent demand. The most famous approach is called “SybilRank” scheme where each node evenly distributes its trust value starting from honest seeds and detects Sybils based on the trust value. Furthermore, Zhang et al. propose to avoid trust values from being distributed into Sybils by pruning suspicious relationships before performing SybilRank. However, we point out that the above two schemes have shortcomings that must be remedied. In the former scheme, seeds are concentrated on the specific communities because they are selected from nodes that have largest number of friends, and thus the trust value is not evenly distributed. In the latter one, a sophisticated attacker can avoid graph pruning by making relationships between Sybil nodes. In this paper, we propose a robust seed selection and graph pruning scheme to detect Sybil nodes more accurately. To more evenly distribute trust value into honest nodes, we first detect communities in the SNS and select honest seeds from each detected community. And then, by leveraging the fact that Sybils cannot make dense relationships with honest nodes, we also propose a graph pruning scheme based on the density of relationships between trusted nodes. We prune the relationships which have sparse relationships with trusted nodes and this enables robust pruning malicious relationships even if the attackers make a large number of common friends. By the computer simulation with real dataset, we show that our scheme improves the detection accuracy of both Sybil and honest nodes.

The recently proposed distributed adaptive direct position determination (D-ADPD) algorithm provides an efficient way to locating a radio emitter using a sensor network. However, this algorithm may be suboptimal in the situation of colored emitted signals. We propose an enhanced distributed adaptive direct position determination (EDA-DPD) algorithm. Simulations validate that the proposed EDA-DPD outperforms the D-ADPD in colored emitted signals scenarios and has the similar performance with the D-ADPD in white emitted signal scenarios.