A GaAs/AlGaAs directional-coupler-type device that use polariton propagation was fabricated and its switching operation was demonstrated. The length of the switching region is as small as 300 µm. The output signal modulation under an electric field shows typical characteristics of directional-coupler type switching. The measured operation voltage is 2 V for an operation wavelength of 805 nm at 10 K. The corresponding signal extinction ratio is 8 dB. These experimental results confirm the efficient operation of the polariton devices, which can be applied to especially small optical -switching devices with low-voltage operation.

In this work, a CMOS on-chip current reference circuit for memory, operational amplifiers, comparators, and data converters is proposed. The reference current is nearly insensitive to temperature and supply-voltage variations. In the proposed circuit, the current component with a positive temperature coefficient cancels that with a negative temperature coefficient each other. While conventional current reference circuits are based on bipolar transistors in BiCMOS, bipolar, or CMOS processes, the proposed circuit can be integrated on a single chip with other digital and analog circuits using a standard CMOS process and extra masks are not required. Measured results are demonstrated for two different prototypes. The first is fabricated employing a 1.0 µm p-well double-poly double-metal CMOS process and operates at 5 V nominally. The second, based on a 0.6 µm n-well process, is optimized for 3 V to 5 V operation. The latter prototype achieves the temperature coefficient of 98 ppm/ over a temperature range from -25 to 75 and the output variation of 1.5% with the supply-voltage changes from 2.5 V to 5.5 V. A simple calibration technique for reducing output current variations improves circuit yield.

Aiming at wideband and flat supercontinuum generation (SC) from optical fibers in the 1.55-µm wavelength region, we study both experimentally and theoretically how SC spectra are influenced by group-velocity dispersion (GVD) of fibers. In the anomalous GVD region, since the peak power of pump pulses is kept high during propagation through the fiber by the higher-order soliton effect, the Raman effect has an adverse effect to flat and wideband SC generation. In the zero GVD region, the interplay of the third-order dispersion (TOD) and the self-phase modulation splits the SC spectrum into two main components. On the other hand, in the normal GVD region, nevertheless the SC spectrum broadens wider and smoother than those in anomalous and zero GVD regions, it is still asymmetric when TOD of the fiber can not be ignored. From these results, we find that a dispersion-flattened fiber with normal GVD is the most suitable for flat and wideband SC generation. A 280-nm wide SC spectrum with the spectral-density fluctuation less than 10 dB is actually generated from such a fiber.

Over roughly the past decade, the lightwave-research community has converged upon a broad architectural vision of the emerging national-scale core network. The vision has been that of a transparent, reconfigurable, wavelength-routed network, in which signals propagate from source to destination through a sequence of intervening nodes without optoelectronic conversion. Broad benefits have been envisioned. Despite the spare elegance of this vision, it is steadily becoming clear that due to the performance, cost, management, and multivendor-interoperability obstacles attending transparency, the needs of civilian communications will not drive the core network to transparency on anything like a national scale. Instead, they will drive it to 'opaque' form, with critical reliance on optoelectronic conversion via transponders. Transponder-based network architectures in fact not only offer broad transmission and manageability benefits. They also make networking at the optical layer possible by offering to the nodes managed and performance-engineered standard-interface signals that can then be reconfigured for provisioning and restoration purposes by optical-layer elements. Because of this, the more pressing challenges in lightwave networking are steadily shifting towards the mechanisms that will be used for provisioning and restoration. Among these are mechanisms based on free-space micromachined optical crossconnects. We describe recent progress on these new devices and the architectures into which they fit, and summarize the reasons why they appear to be particularly well-matched to the task of provisioning and restoring opaque multiwavelength core long-haul networks.

A 1.55-µm hybrid integrated wavelength-converter module was fabricated using a two-channel spot-size converter integrated semiconductor optical amplifier (SS-SOA) on a planar-lightwave-circuit (PLC) platform. Clear eye opening and penalty-free wavelength conversion were obtained at 2.5-Gb/s modulation with a wide wavelength difference of 46 nm. The module showed good characteristics including low insertion loss (0.1 dB), and high conversion efficiency (-0.2 dB). It also showed stable wavelength conversion for as wide as a 13 temperature range.

After a short introduction to the different requirements to and techniques for wavelength conversion, focus is on cross-gain and cross-phase modulation in SOA based converters. Aspects like jitter accumulation, regeneration and conversion to the same wavelength is discussed. It is predicted that jitter accumulation can be minimised while also assuring a high extinction ratio by using a 9-10 dB ratio between the signal and CW power. Using this guideline simulations show that 20 cross-gain modulation converters can be cascaded at 10 Gbit/s with only 20 ps of accumulated jitter and an extinction ratio of 10 dB. The regenerative capabilities of the cross-phase converters are described and verified experimentally at 20 Gbit/s. By controlling the input power to an EDFA, the noise redistribution and improvement of the signal-to-noise ratio is demonstrated. In a similar experiment at 2.5 Gbit/s, the regeneration causes a reduction of the required input power to an in-line EDFA of 6 dB for a power penalty of 1 dB at a bit error rate of 10-9. If two converters are concatenated the power requirement is reduced 8 dB. Obviously, the power reduction allows for longer spans between in-line EDFAs. A simple scheme for regeneration without wavelength conversion is assessed at 2.5 Gbit/s resulting in 4.5 dB lower required EDFA input power. The scheme is characterised by a quasi-digital transfer function that is ideal for regeneration. A combination of cross-gain and cross-phase conversion is used to perform conversion to the same wavelength at 20 Gbit/s. The insertion penalty for this dual-stage converter is below 2 dB and is mainly caused by extinction ratio degradation from the cross-gain converter. Finally, a new device for all-optical wavelength conversion has been proposed and 2.5 Gbit/s operation has been simulated with good results.

Precise plastic V-grooved alignment parts for connecting single-mode optical fiber arrays to multi-port optical devices were successfully molded with a thermosetting resin by using a highly productive injection molding technique. The molded parts are two types of V-grooved blocks that are compatible with the size of optical devices having eight or twelve optical ports. Their dimensional accuracy must be better than 1 µm over the whole length of the V-grooves for efficient optical coupling. This strict requirement was satisfied using precisely processed molding tools with a specially chosen resin under optimum molding conditions. The feasibility of the optical alignment parts was assured by an evaluation of their loss characteristics and reliability in coupling single-mode fibers to 18 power splitters, where the average optical loss was 0.2 dB and the change in loss was less than 0.2 dB under a temperature cycling test and also under a damp heat test. These results show that plastic molded parts can be used for precise coupling of single-mode optical devices, and will lead to a breakthrough in innovation in the field of optical packaging.

We developed an optical transceiver diode (TRAD) module for bi-directional time-compression-multiplexing (TCM) transmission systems. A wavelength-insensitive structure as a receiver and a low-capacitance configuration in the module provide a high sensitivity. Stable switching of 156 Mbit/s NRZ burst signals between the transmitter and receiver modes is achieved. In addition, it is shown that optical module cost can be further reduced by using passive alignment on a Si bench.

In many applications of digital video database systems such as digital library, video data is often compressed with MPEG video algorithms. It will be an important technique to insert the additional information data like indexes and contents effectively into video database which is compressed with MPEG, because we can always deal with the additional information with video data itself easily. We propose a method for inserting optional binary data such as index information of digital library into MPEG-1 and -2 bitstreams. The binary data inserted MPEG video bitstreams using our proposed scheme are also according to the specification of the MPEG video frame structure. The proposed method allows us to extract the inserted binary data perfectly though MPEG-1 and -2 video are lossy algorithms. And the quality of decoded images after extracting added information is almost the same as that of ordinary MPEG bitstreams. Furthermore, traditional standard MPEG-1 and -2 video decoder which can not extract inserted binary data can also decode images from the binary data inserted MPEG video bitstreams without obvious image degradation. There are some different points between the proposed insertion technique of the binary data and the watermarking technique. The technique of watermarking prepares to deal with alter watermarking by others. And the technique of watermarking is required for the identification of the signature and the perfect extraction of the inserted image signature is not required in the lossy MPEG video environment. On the other hand, we have to extract all of the inserted binary information data correctly with the insertion technique of the binary information. Simulations using MPEG video sequences with inserted binary data are presented to quantify some performance factors concerned. We have not heard about inserting data method which purpose is such as index and content information insertion.

In this paper, we study a new hybrid speech coder which employs a modified version of the harmonic sinusoidal analysis to encode the periodic contents of speech waveform and to split the speech spectrum into two frequency regions of harmonic and random components. A reliable fundamental frequency is estimated for the harmonic region using both speech and its linear predictive (LP) residual spectrum. The peak envelope of speech spectrum is encoded in terms of the coefficients of an all-pole spectrum. A harmonic tracking algorithm appropriately interpolates the sinusoidal parameters to achieve a smooth transition between the parameter update points and to reconstruct an essential level of periodicity in the synthetic voiced speech. The random part of spectrum and unvoiced speech are coded using the conventional CELP algorithm. The individual components are then combined at the decoder to obtain the synthetic speech. The proposed hybrid coder which combines the powerful features of the sinusoidal and CELP coding algorithms yeilds a high quality synthetic speech at 4.05 kbps.

We propose a new bit timing recovery (BTR) scheme, called perturbed sampling BTR (PSBTR), that can operate near the symbol rate in high-bit-rate wireless systems. A peculiar sample clock, the duty factor of which is not 50%, is used in the PSBTR scheme. We call this type of clock a perturbed sample clock and use it for clock recovery. In PSBTR, there is no cycle slip of the sample clock, and the PSBTR circuit is mostly digital. We examine the performance of the PSBTR scheme under additive white Gaussian noise (AWGN) by computer simulation and experiment, and from these results, clarify the relationship between the performance and circuit parameters of the PSBTR circuit. The overall results indicate that the PSBTR scheme performs well and can be employed as a BTR scheme for high-bit-rate wireless systems.

A novel 10-Gb/s fast acquisition bit-synchronization circuit for use in a Tb/s throughput optical packet switch has been developed. The circuit is a best-sampled-data-select type based on multiple phase-clocks, and it processes the asynchronous input packets into a synchronous data stream in a serial manner, which is advantageous in terms of circuit scale and consumption power compared with the parallel processing type. The circuit was developed using Si-bipolar ultrahigh-speed gate arrays and it was used to develop a 10-Gb/s optical asynchronous packet receiver module. The core logic of this circuit module required about 100 gates, consume 6 W, and the size of the module was reduced to only 170 mm (W)130 mm (D) 10 mm (H). Using the receiver module, a fast acquisition time of 9 bits and receiver sensitivity penalty of less than 1.5 dB due to re-synchronization were measured.

In this paper we propose an algorithm for generating maximum weight independent sets in a circle graph, that is, for putting out all maximum weight independent sets one by one without duplication. The time complexity is O(n3 + β ), where n is the number of vertices, β output size, i. e. , the sum of the cardinalities of the output sets. It is shown that the same approach can be applied for spider graphs and for circular-arc overlap graphs.

This paper presents a new technique for the synthesis of sets of low-peak sequences exhibiting low peak cross correlation. The sequences also have flat power spectra and are suitable for many applications requiring such sets of uncorrelated pseudo-white-noise sources. This is a new application of the ta-sequence (trigonometric function aliasing sequence), which itself is a very new technique that uses the well-known "Reed-Solomon code" or "One coincident code" to generate these sets of low-peak-factor pseudo-white-noise exhibiting low peak cross correlation. The ta sequence method presented here provides the means for generating various sequences at the lengths required for such applications as system measurement (needing uncorrelated test signals), pseudo-noise synthesis (for spread spectrum communication), and audio signal processing for sound production (for enhancing spatial imagery in stereo signals synthesized from mono sources) and sound reproduction (for controlling unwanted interference effects in multiple-loudspeaker arrays).

This paper describes design techniques for suppressing crosstalk in an optical transceiver module using PLC-hybrid-integration technologies and for achieving burst-mode operation with high sensitivity and wide dynamic range using CMOS-IC technologies. An arrangement that reduces the electrical crosstalk to less than -100 dB was designed using three-dimensional electromagnetic field analysis. The configurations of a newly developed instantaneous-response CMOS LD driver circuit is also described and instantaneous-response CMOS receiver circuit techniques are reviewed. With these techniques, we have succeeded in building optical transceiver modules for ATM-PON systems using PLC-hybrid-integration and inexpensive standard CMOS-IC fabrication processes. Under full-duplex operation at 156 Mb/s, fabricated transceiver modules showed receiver sensitivity of better than -34 dBm and dynamic range of over 28 dB, which satisfy both the class-B and class-C specifications recommended by ITU-T (International Telecommunication Union-Telecommunication standardization sector) G983.1 for the optical transceiver module for an ONU (optical network unit).

Newton based adaptive algorithms are among the algorithms which are known to exhibit a higher convergence speed in comparison to the least mean square (LMS) algorithms. In this paper we propose a simplified Newton based adaptive algorithm for an adaptive infinite impulse response (IIR) filter implemented using cascades of second order allpass filters and a finite impulse response (FIR) filter. The proposed Newton based algorithm avoids the complexity that may arise in the direct differentiation of the mean square error. The analysis and simulation results presented for the algorithm, show that the property of convergence of the poles of the IIR ADF to those of the unknown system will be maintained for both white and colored input signal. Computer simulation results confirm an increase in convergence speed in comparison to the LMS algorithm.

This paper presents two man-machine reliability models. A system consists of one machine unit, one operator, and one event detecting monitor. The machine unit has three states, normal, abnormal, and failed. The event detecting monitor may fail in two ways. If a machine unit becomes abnormal, the event detecting monitor sends a signal, and the operator takes necessary actions. If the operator fails in the action in the cause of human error, the machine unit goes down. The condition of the operator is classified into two types, good and bad. The time to repair, and the human error rate both depend on the condition of the operator. The MTTF is obtained by using a Markov model and numerical computation. Furthermore, the optimal operating period which minimizes the overall cost is decided by using computer methods. Some numerical examples are shown.

This letter proposes a diffusion model that considers both mobility and multimedia based on the user population process to examine the effects of multimedia in mobile communications. As an application example of this model, the shared bandwidth that can be used by one user in packet communications is evaluated. In this model, the user speed and variation in the number of users in a cell are interrelated with respect to mobility. By examining the shared bandwidth behavior based on multimedia teletraffic characteristics, assuming that the number of simultaneously-communicating users within a cell have self-similarity, we found that shared bandwidth and its variance are not dependent on self-similarity but that variance in the shared bandwidth is dependent on user speed.

In this paper, we consider the Integrate-and-Fire Model (ab. IFM) with two periodic inputs. The IFM outputs a pulse-train which is governed by a one dimensional return map. Using the return map, the relationship between the inputs and the output is clarified: the first input determines the global shape of the return map and the IFM outputs various periodic and chaotic pulse-trains; the second input quantizes the state of the return map and the IFM outputs various periodic pulse-trains. Using a computer aided analysis method, the quantized return map can be analyzed rigorously. Also, some typical phenomena are confirmed in the laboratory.

This paper proposes a new design method of nonlinear filtering and fixed-point smoothing algorithms in discrete-time stochastic systems. The observed value consists of nonlinearly modulated signal and additive white Gaussian observation noise. The filtering and fixed-point smoothing algorithms are designed based on the same idea as the extended Kalman filter derived based on the recursive least-squares Kalman filter in linear discrete-time stochastic systems. The proposed filter and fixed-point smoother necessitate the information of the autocovariance function of the signal, the variance of the observation noise, the nonlinear observation function and its differentiated one with respect to the signal. The estimation accuracy of the proposed extended filter is compared with the extended maximum a posteriori (MAP) filter theoretically. Also, the current estimators are compared in estimation accuracy with the extended MAP estimators, the extended Kalman estimators and the Kalman neuro computing method numerically.