It is now becoming important for mobile cellular networks to accommodate all kinds of Internet of Things (IoT) communications. However, the contention-based random access and radio resource allocation used in traditional cellular networks, which are optimized mainly for human communications, cannot efficiently handle large-scale IoT communications. For this reason, standardization activities have emerged to serve IoT devices such as Cellular-IoT (C-IoT). However, few studies have been directed at evaluating the performance of C-IoT communications with periodic data transmissions, despite this being a common characteristic of many IoT communications. In this paper, we give the performance analysis results of mobile cellular networks supporting periodic C-IoT communications, focusing on the performance differences between LTE and Narrowband-IoT (NB-IoT) networks. To achieve this, we first construct an analysis model for end-to-end performance of both the control plane and data plane, including random access procedures, radio resource allocation, establishing bearers in the Evolved Packet Core network, and user-data transmissions. In addition, we include the impact of the immediate release of the radio resources proposed in 3GPP. Numerical evaluations show that NB-IoT can support more IoT devices than LTE, up to 8.7 times more, but imposes a significant delay in data transmissions. We also confirm that the immediate release of radio resources increases the network capacity by up to 17.7 times.

This paper proposes a reference-clock-less quick-start-up CDR that resumes from a stand-by state only with a 4-bit preamble utilizing a phase generator with an embedded Time-to-Digital Converter (TDC). The phase generator detects 1-UI time interval by using its internal TDC and works as a self-tunable digitally-controlled delay line. Once the phase generator coarsely tunes the recovered clock period, then the residual time difference is finely tuned by a fine Digital-to-Time Converter (DTC). Since the tuning resolution of the fine DTC is matched by design with the time resolution of the TDC that is used as a phase detector, the fine tuning completes instantaneously. After the initial coarse and fine delay tuning, the feedback loop for frequency tracking is activated in order to improve Consecutive Identical Digits (CID) tolerance of the CDR. By applying the frequency tracking architecture, the proposed CDR achieves more than 100bits of CID tolerance. A prototype implemented in a 65nm bulk CMOS process operates at a 0.9-2.15Gbps continuous rate. It consumes 5.1-8.4mA in its active state and 42μA leakage current in its stand-by state from a 1.0V supply.

The integration of social networking concepts into the Internet of Things has led to the Social Internet of Things (SIoT) paradigm, and trust evaluation is essential to secure interaction in SIoT. In SIoT, when resource-constrained nodes respond to unexpected malicious services and malicious recommendations, the trust assessment is prone to be inaccurate, and the existing architecture has the risk of privacy leakage. An edge-cloud collaborative trust evaluation architecture in SIoT is proposed in this paper. Utilize the resource advantages of the cloud and the edge to complete the trust assessment task collaboratively. An evaluation algorithm of relationship closeness between nodes is designed to evaluate neighbor nodes' reliability in SIoT. A trust computing algorithm with enhanced sensitivity is proposed, considering the fluctuation of trust value and the conflict between trust indicators to enhance the sensitivity of identifying malicious behaviors. Simulation results show that compared with traditional methods, the proposed trust evaluation method can effectively improve the success rate of interaction and reduce the false detection rate when dealing with malicious services and malicious recommendations.

Person re-identification (Re-ID) aims to match the same pedestrain identity images across different camera views. Because pedestrians will change clothes frequently for a relatively long time, while many current methods rely heavily on color appearance information or only focus on the person biometric features, these methods make the performance dropped apparently when it is applied to Clohting-Changing. To relieve this dilemma, we proposed a novel Multi Feature Fusion Attention Network (MFFAN), which learns the fine-grained local features. Then we introduced a Clothing Adaptive Attention (CAA) module, which can integrate multiple granularity features to guide model to learn pedestrain's biometric feature. Meanwhile, in order to fully verify the performance of our method on clothing-changing Re-ID problem, we designed a Clothing Generation Network (CGN), which can generate multiple pictures of the same identity wearing different clothes. Finally, experimental results show that our method exceeds the current best method by over 5% and 6% on the VCcloth and PRCC datasets respectively.

We propose a novel synthetic-benchmarks generation model using partial time-series regression, called Partial-Regression-Integrated Generic Model (PRIGM). PRIGM abstracts the unique characteristics of the input sensor data into generic time-series data confirming the generation similarity and evaluating the correctness of the synthetic benchmarks. The experimental results obtained by the proposed model with its formula verify that PRIGM preserves the time-series characteristics of empirical data in complex time-series data within 10.4% on an average difference in terms of descriptive statistics accuracy.

With the high development of computation requirements in Internet of Things, resource-limited edge servers usually require to cooperate to perform the tasks. Most related studies usually assume a static cooperation approach which might not suit the dynamic environment of edge computing. In this paper, we consider a dynamic cooperation approach by guiding edge servers to form coalitions dynamically. It raises two issues: 1) how to guide them to optimally form coalitions and 2) how to cope with the dynamic feature where server statuses dynamically change as the tasks are performed. The coalitional Markov decision process (CMDP) model proposed in our previous work can handle these issues well. However, its basic solution, coalitional Q-learning, cannot handle the large scale problem when the task number is large in edge computing. Our response is to propose a novel algorithm called deep coalitional Q-learning (DCQL) to solve it. To sum up, we first formulate the dynamic cooperation problem of edge servers as a CMDP: each edge server is regarded as an agent and the dynamic process is modeled as a MDP where the agents observe the current state to formulate several coalitions. Each coalition takes an action to impact the environment which correspondingly transfers to the next state to repeat the above process. Then, we propose DCQL which includes a deep neural network and so can well cope with large scale problem. DCQL can guide the edge servers to form coalitions dynamically with the target of optimizing some goal. Furthermore, we run experiments to verify our proposed algorithm's effectiveness in different settings.

Distributed edge cloud computing is an important computation infrastructure for Internet of Things (IoT) and its task offloading problem has attracted much attention recently. Most existing work on task offloading in distributed edge cloud computing usually assumes that each self-interested user owns one edge server and chooses whether to execute its tasks locally or to offload the tasks to cloud servers. The goal of each edge server is to maximize its own interest like low delay cost, which corresponds to a non-cooperative setting. However, with the strong development of smart IoT communities such as smart hospital and smart factory, all edge and cloud servers can belong to one organization like a technology company. This corresponds to a cooperative setting where the goal of the organization is to maximize the team interest in the overall edge cloud computing system. In this paper, we consider a new problem called cooperative task offloading where all edge servers try to cooperate to make the entire edge cloud computing system achieve good performance such as low delay cost and low energy cost. However, this problem is hard to solve due to two issues: 1) each edge server status dynamically changes and task arrival is uncertain; 2) each edge server can observe only its own status, which makes it hard to optimize team interest as global information is unavailable. For solving these issues, we formulate the problem as a decentralized partially observable Markov decision process (Dec-POMDP) which can well handle the dynamic features under partial observations. Then, we apply a multi-agent reinforcement learning algorithm called value decomposition network (VDN) and propose a VDN-based task offloading algorithm (VDN-TO) to solve the problem. Specifically, the motivation is that we use a team value function to evaluate the team interest, which is then divided into individual value functions for each edge server. Then, each edge server updates its individual value function in the direction that can maximize the team interest. Finally, we choose a part of a real dataset to evaluate our algorithm and the results show the effectiveness of our algorithm in a comparison with some other existing methods.

Real-time and scalable multicast services are of paramount importance to Industrial Internet of Things (IIoT) applications. To realize these services, the multicast algorithm should, on the one hand, ensure the maximum delay of a multicast session not exceeding its upper delay bound. On the other hand, the algorithm should minimize session costs. As an emerging networking paradigm, Software-defined Networking (SDN) can provide a global view of the network to multicast algorithms, thereby bringing new opportunities for realizing the desired multicast services in IIoT environments. Unfortunately, existing SDN-based multicast (SDM) algorithms cannot meet the real-time and scalable requirements simultaneously. Therefore, in this paper, we focus on SDM algorithm design for IIoT environments. To be specific, the paper first converts the multicast tree construction problem for SDM in IIoT environments into a delay-bounded least-cost shared tree problem and proves that it is an NP-complete problem. Then, the paper puts forward a shared tree (ST) algorithm called SDM4IIoT to compute suboptimal solutions to the problem. The algorithm consists of five steps: 1) construct a delay-optimal shared tree; 2) divide the tree into a set of subpaths and a subtree; 3) optimize the cost of each subpath by relaxing the delay constraint; 4) optimize the subtree cost in the same manner; 5) recombine them into a shared tree. Simulation results show that the algorithm can provide real-time support that other ST algorithms cannot. In addition, it can achieve good scalability. Its cost is only 20.56% higher than the cost-optimal ST algorithm. Furthermore, its computation time is also acceptable. The algorithm can help to realize real-time and scalable multicast services for IIoT applications.

This paper presents a physical layer wireless device identification method that uses a convolutional neural network (CNN) operating on a quadrant IQ transition image. This work introduces classification and detection tasks in one process. The proposed method can identify IoT wireless devices by exploiting their RF fingerprints, a technology to identify wireless devices by using unique variations in analog signals. We propose a quadrant IQ image technique to reduce the size of CNN while maintaining accuracy. The CNN utilizes the IQ transition image, which image processing cut out into four-part. An over-the-air experiment is performed on six Zigbee wireless devices to confirm the proposed identification method's validity. The measurement results demonstrate that the proposed method can achieve 99% accuracy with the light-weight CNN model with 36,500 weight parameters in serial use and 146,000 in parallel use. Furthermore, the proposed threshold algorithm can verify the authenticity using one classifier and achieved 80% accuracy for further secured wireless communication. This work also introduces the identification of expanded signals with SNR between 10 to 30dB. As a result, at SNR values above 20dB, the proposals achieve classification and detection accuracies of 87% and 80%, respectively.

To reduce the complexity of direct radio frequency (RF) undersampling real-time spectrum monitoring in wireless Internet of Things (IoT) bands (920MHz, 2.4GHz, and 5 GHz bands), a design method of sampling frequencies is proposed in this paper. The Direct RF Undersampling receiver architecture enables the use of ADC with sampling clock lower frequency than receiving RF signal, but it needs RF signal identification signal processing from folded spectrums with multiple sampling clock frequencies. The proposed design method allows fewer sampling frequencies to be used than the conventional design method for continuous frequency range (D.C. to 5GHz-band). The proposed method reduced 2 sampling frequencies in wireless IoT bands case compared with the continuous range. The design result using the proposed method is verified by measurement.

To achieve smooth beam injection in operation of synchrotron radiation facilities, pulsed multipole magnet beam injectors are developed. It is found that the developed beam injector causes serious disturbance in the circulating storage beam in the Aichi synchrotron radiation center, and that such the unexpected disturbance of the storage beam may be caused by eddy current induced on thin titanium coating inside a beam duct. In this work, the induced eddy current on the titanium layer is evaluated quantitatively by numerical simulations and improvement for the developed beam injector is discussed based on the numerical simulation.

The energy efficiency of intelligent reflecting surface (IRS) enabled internet of things (IoT) networks is studied in this letter. The energy efficiency is mathematically expressed, respectively, as the number of reflecting elements and the spectral efficiency of the network and is shown to scale in the logarithm of the reflecting elements number in the high regime of transmit power from source node. Furthermore, it is revealed that the energy efficiency scales linearly over the spectral efficiency in the high regime of transmit power, in contrast to conventional studies on energy and spectral efficiency trade-offs in the non-IRS wireless IoT networks. Numerical simulations are carried out to verify the derived results for the IRS enabled IoT networks.

The effect of provision of “Neither-Good-Nor-Bad” (NGNB) information on the perceived trustworthiness of agents has been investigated in previous studies. The experimental results have revealed several conditions under which the provision of NGNB information works effectively to make users perceive greater trust of agents. However, the experiments in question were carried out in a situation in which a user is able to choose, with the agent's advice, one of a limited number of options. In practical problems, we are often at a loss as to which to choose because there are too many possible options and it is not easy to narrow them down. Furthermore, in the above-mentioned previous studies, it was easy to predict the size of profits that a user would obtain because its pattern was also limited. This prompted us, in this paper, to investigate the effect of provision of NGNB information on the users' trust of agents under conditions where it appears to the users that numerous options are available. Our experimental results reveal that an agent that reliably provides NGNB information tends to gain greater user trust in a situation where it appears to the users that there are numerous options and their consequences, and it is not easy to predict the size of profits. However, in contradiction to the previous study, the results in this paper also reveal that stable provision of NGNB information in the context of numerous options is less effective in a situation where it is harder to obtain larger profits.

In this paper, we propose a novel Hybrid-Hierarchical spatial-aerial-Terrestrial Edge-Centric (H2TEC) for the space-air integrated Internet of Things (IoT) networks. (H2TEC) comprises unmanned aerial vehicles (UAVs) that act as mobile fog nodes to provide the required services for terminal nodes (TNs) in cooperation with the satellites. TNs in (H2TEC) offload their generated tasks to the UAVs for further processing. Due to the limited energy budget of TNs, a novel task allocation protocol, named TOP, is proposed to minimize the energy consumption of TNs while guaranteeing the outage probability and network reliability for which the transmission rate of TNs is optimized. TOP also takes advantage of the energy harvesting by which the low earth orbit satellites transfer energy to the UAVs when the remaining energy of the UAVs is below a predefined threshold. To this end, the harvested power of the UAVs is optimized alongside the corresponding harvesting time so that the UAVs can improve the network throughput via processing more bits. Numerical results reveal that TOP outperforms the baseline method in critical situations that more power is required to process the task. It is also found that even in such situations, the energy harvesting mechanism provided in the TOP yields a more efficient network throughput.

Machine learning, especially deep learning, is dramatically changing the methods associated with optical thin-film inverse design. The vast majority of this research has focused on the parameter optimization (layer thickness, and structure size) of optical thin-films. A challenging problem that arises is an automated material search. In this work, we propose a new end-to-end algorithm for optical thin-film inverse design. This method combines the ability of unsupervised learning, reinforcement learning and includes a genetic algorithm to design an optical thin-film without any human intervention. Furthermore, with several concrete examples, we have shown how one can use this technique to optimize the spectra of a multi-layer solar absorber device.

Blockchain is one of the prominent rapidly used technology in the last decade in various applications. In recent years, many researchers explored the capabilities of blockchain in smart IoT to address various security challenges. Integration of IoT and blockchain solves the security problems but scalability still remains a huge challenge. To address this, various AI techniques can be applied in the blockchain IoT framework, thus providing an efficient information system. In this survey, various works pertaining to the domains which integrate AI, IoT and Blockchain has been explored. Also, this article discusses potential industrial use cases on fusion of blockchain, AI and IoT applications and its challenges.

In this paper, an ultra-thin wave absorber using a resistive patch array closely-placed in front of a back-metal is designed. The positively large susceptance is required for the patch array to cancel out the negatively large input susceptance of the short-circuited ultra-thin spacer behind the array. It is found that the array needs the gap of 1mm, sheet resistance of less than 20Ω/sq. and patch width of more than 15mm to obtain the zero input susceptance of the absorber with the 1/30 wavelength spacer. Moreover, these parameters were designed considering the electromagnetic coupling between the array and back-metal, and the square patch array absorbers with the thickness from 1/30 to 1/150 wavelength were designed.

We propose a generalization of the rolling guidance filter (RGF) to a similarity-based clustering (SBC) algorithm which can handle general vector data. The proposed RGF-based SBC algorithm makes the similarities between data clearer than the original similarity values computed from the original data. On the basis of the similarity values, we assign cluster labels to data by an SBC algorithm. Experimental results show that the proposed algorithm achieves better clustering result than the result by the naive application of the SBC algorithm to the original similarity values. Additionally, we study the convergence of a unimodal vector dataset to its mean vector.

For 360-degree video streaming, a 360-degree video is divided into segments temporally (i.e. some seconds). Each segment consists of multiple video tiles spatially. In this paper, we propose a tile quality selection method for tile-based video streaming. The proposed method suppresses the spatial quality variation within the viewport caused by a change of the viewport region due to user head movement. In the proposed method, the client checks whether the difference in quality level between the viewport and the region around the viewport is large, and if so, reduces it when assigning quality levels. Simulation results indicate that when the segment length is long, quality variation can be suppressed without significantly reducing the perceived video quality (in terms of bitrate). In particular, the quality variation within the viewport can be greatly suppressed. Furthermore, we verify that the proposed method is effective in reducing quality variation within the viewport and across segments without changing the total download size.

Based on TLS-ESPRIT algorithm, this paper proposes a weighted spatial smoothing DOA estimation algorithm to address the problem that the conventional TLS-ESPRIT algorithm will be disabled to estimate the direction of arrival (DOA) in the scenario of coherent sources. The proposed method divides the received signal array into several subarrays with special structural feature. Then, utilizing these subarrays, this paper constructs the new weighted covariance matrix to estimate the DOA based on TLS-ESPRIT. The auto-correlation and cross-correlation information of subarrays in the proposed algorithm is extracted sufficiently, improving the orthogonality between the signal subspace and the noise subspace so that the DOA of coherent sources could be estimated accurately. The simulations show that the proposed algorithm is superior to the conventional spatial smoothing algorithms under different signal to noise ratio (SNR) and snapshot numbers with coherent sources.