This paper presents a new redundant fault identification algorithm, REDUCT. This algorithm handles the redundant fault identification problem by transforming a given circuit into another circuit. It also reduces the complexity of the transformed circuit, which is caused by a large number of reconvergences and head lines, using five circuit reduction techniques. Further, it proves redundancies and generates test patterns for hard faults more efficiently than conventional test pattern generation algorithms. We obtained 100% fault coverage for all ISCAS85 benchmark circuits using REDUCT following the execution of the test pattern generation algorithm N2-V.

Sea clutter was measured using an X-band radar at very high grazing angles between 8.2 and 17.5. The sea state was 7 with the wave height of 6 to 9m. The wind velocity was 25m/s. It is shown that sea clutter amplitudes obey the log-normal and K distributions using the Akaike Information Criterion (AIC) , which is more rigorous fit to the distribution to the data than the least squares method.

We propose a fully digital architecture for Kohonen network suitable for VLSI implementation. The proposed architecture adopts a functional memory type parallel processor (FMPP) architecture which has a structure similar to a content addressable memory (CAM). One word of CAM is regarded as a processing element and a group of elements forms a neuron. All processing elements execute the same operation in bit-serial but in processor-parallel. Thus the number of instructions for realizing the network algorithm is independent of the number of neurons in the network. With reference to a previously reported CAM, we estimate a network with 96 neurons for speech recognition could be integrated on three chips using a 1.2 µm process, and it operates 50 times faster than a sequential hardware. Owing to its highly regular structure of memories, the proposed hardware architecture is well compatible with current VLSI technology.

Since semiconductor memory chip has been growing rapidly in its capacity, memory testing has become a crucial problem in RAMs. This paper proposes a new RAM test algorithm, called generalized marching test (GMT), which detects static and dynamic pattern sensitive faults (PSF) in RAM chips. The memory array with N cells is partitioned into B sets in which every two cells has a cell-distance of at least d. The proposed GMT performs the ordinary marching test in each set and finally detects PSF having cell-distance d. By changing the number of partitions B, the GMT includes the ordinary marching test for B1 and the walking test for BN. This paper demonstrates the practical GMT with B2, capable of detecting PSF, as well as other faults, such as cell stuck-at faults, coupling faults, and decoder faults with a short testing time.

This paper reviews the historical aspect of contributions on the theory of analysis and diagnosis of linear circuits, which have been made by Japanese researchers in these twenty years. On papers of diagnosis, those related to element-value solvability (or determinability) are mainly reviewed. Some important problems are suggested.

In this letter, a practical functional test method is proposed for production tests of microprocessor based sequence controllers. In our method, a controller under test is determined as a faulty one if the outputs defined in the process flowchart can not be provided from the circuit.

A new type jacket cutter for optical fibers is designed, and it is confirmed experimentally that its performance is superior to those of the conventional cutters. Using this new cutter which is mainly consisted of a rotatable fiber holder and a pair of blades separated by a distance of 0.3-0.4mm, only the tight jacket is cut and removed while the primary coating and the fiber are kept intact. As the result, the probability of damage to the fiber surface during jacket removal is reduced to about 0% compared to 10% found in the case of a conventional cutter. This result is useful to increase the reliability of optical fibers during assembling efforts.

A new transfer mode and a switching architecture which can support loss free and no delay jitter service class with shorter switching delay compared with "stop and go queueing scheme" is proposed. This scheme combines ATM scheme with hierarchical STM framing concept.

More than 500 articles in the field of analog circuits in the last two decades are surveyed and about 170 of which are listed in the References. These are mainly included in the Transactions of IEICE. The survey are made on the five fields; general analog circuit technology, modeling and simulation, active RC filters, switched capacitor circuits, and A/D and D/A converters.

Novel three-dimensional structures for passive elements--inductors, capacitors, transmission lines, and airbridges--have been developed to reduce the area they consume in GaAs MMICs. These structures can be formed with a simple technology by electroplating along the sidewalls of a photoresist. Adopting the new structures, most passive elements in MMICs have been shrunk to less than 1/4 the size of conventional ones.

This paper presents a new high-speed three-dimensional (3-D) object recognition system based on two-dimensional (2-D) chain code matching. An observed 3-D object is precisely represented by a 2-D chain code sequence from the discrete surface points of the 3-D object, so that any complex objects can be recognized precisely. Moreover, the normalization procedures such as translation, rotation of 3-D objects except scale changes can be performed systematically and regularly regardless of the complexity of the shape of 3-D objects, because almost all the normalization procedures of 3-D objects are included in the 2-D chain code matching procedure. As a result, the additional normalization procedure become only the processing time for scale changes which can be performed easily by normalizing the length of the chain code sequence. In addition, the fast fourier transformation (FFT) is applicable to 2-D chain code matching which calculates cross correlation between an input object and a reference model, so that very fast recognition is performed. In fact, it is demonstrated that the total recognition time of a 3-D ofject is estimated at 5.35 (sec) using the 28.5-MIPS SPARC workstation.

Recessed-gate DMTs (doped-channel hetero-MISFETs) with i-AlGaAs/n-GaAs structure and pseudomorphic i-AlGaAs/n-InGaAs/i-GaAs structure have been developed. Broad plateaus in gm and fT provide evidence that the DMTs make the devices suitable for high-speed large-signal operation. GaAs DMTs with 0.35 µm-length have gate turn on voltage of 0.7 V, maximum transconductance of 320 mS/mm and fT of 41 GHz. Pseudomorphic DMTs have gate turn on voltage of 0.9 V, maximum transconductance of 320 mS/mm, fT of 42 GHz and have the enhanced advantages of high current drivability and large gate swing. Further more, with the use of the recessed-gate DMTs, a high-speed laser driver IC for multi-Gb/s optical communication systems are demonstrated. This laser driver IC operates at 10 Gb/s with rise and fall times as fast as 40 psec, and it can drive up to 60 mA into a 25 Ω load.

An active feedback resonator (AFR) is a kind of circuit which functions as a high unloaded Q resonator. The AFR employs an active feedback loop which compensates for the energy loss of a conventional microwave resonator. Owing to an active element in the AFR, thermal noise should be taken into account when designing the AFR. In order to simplify a circuit design using the AFR we introduced noise temperature (Tn) for the AFR. In addition, we describe the AFR design which gives minimum noise temperature. Finally, the noise temperature, measured in an AFR as a band elimination filter, is compared with the theoretical value to evaluate the AFR.

In this paper we present an Overlapped Block Gauss-Seidel (OBGS) algorithm for the solution of large scale LSEs (Linear System of Equations) based on array architecture which we have already proposed. Better partitioning for processor array usually requires (1) balanced block size, and (2) minimum coupling between blocks for better convergence. These conditions can well be satisfied by overlapping some variables in computation algorithm. The mathematical implication of overlapped partitioning is discussed at first, and some examples show the effectiveness of OBGS algorithm. Conclusion points out that the convergence properties can well be improved by proper choice of overlapped variables. An efficient algorithm is given for choosing block and variables in order to realize above conditions.

A superresolution technique is considered for use in antenna gain measurements. A modification of the MUSIC algorithm is employed to resolve incident signals separately in the time domain. The modification involves preprocessing the received data using a spatial scheme prior to applying the MUSIC algorithm. Interference rejection in the antenna measurements using the fast Fourier transform (FFT) based techniques have been realized by a recently developed vector network analyzer, and its availability has been reported in the literature. However, response resolution in the time domain of these conventional techniques is limited by the antenna bandwidth. The MUSIC algorithm has the advantage of being able to eliminate unwanted responses when performing antenna measurements in situations where the antenna band-width is too narrow to support FFT based techniques. In this paper, experimental results of antenna gain measurements in a multipath environment show the accuracy and resolving power of this technique.

The performance of processing elements can be improved by the progress of VLSI circuit technology, while the communication overhead can not be negligible in parallel processing system. This paper presents a unified scheduling that allocates tasks having different task processing times in multiple processing elements. The objective function is formulated to measure communication time between processing elements. By employing constraint conditions, the scheduling efficiently generates an optimal solution using an integer programming so that minimum communication time can be achieved. We also propose a VLSI processor for robotics whose latency is very small. In the VLSI processor, the data transfer between two processing elements can be done very quickly, so that the communication cycle time is greatly reduced.

This letter presents a technique to cancel the parasitic effects of operational amplifier (op amp) in active filter design. To minimize the effects, an op amp model considering the parasitics (i.e. both parasitic poles and zeros) is utilized. It is shown that undesirable factors in the transfer function due to the parasitics can be canceled well by predistorting the passive element values of the circuit. As an example, an active-R highpass filter is evaluated both theoretically and numerically. In this way, the proposed technique can be effectively incorporated into the design of active filters.

A genetic method to generate a neural network which has both structure and connection weights adequate for a given task is proposed. A neural network having arbitrary connections is regarded as a virtual living thing which has genes representing its connections among neural units. Effectiveness of the network is estimated from its time sequential input and output signals. Excellent individuals, namely appropriate neural networks, are generated through generation iterations. The basic principle of the method and its applications are described. As an example of evolution from randomly generated networks to feedforward networks, an XOR problem is dealt with, and an action control problem is used for making networks containing feedback and mutual connections. The proposed method is available for designing a neural network whose adequate structure is unknown.

In using a natural language database interface (NLI) to access the contents of a databese, the user queries may contain terms that do not appear at all in both the NLI lexicon and the database. A friendly NLI should not reject user queries with unknown terms, but should be able to handle them, and should be able to learn new lexical items. Such capability increases the usefulness of the NLI, and allows the NLI to more cover the domain of the underlying database. Therefore, a technique to handle unknown terms is decisive in designing a friendly NLI. In this work, we discuss a method that would allow a NLI to identify the meanings of unknown database field values, and terms that are exceeding the conceptual coverage of the database, in the user queries, by engaging the user in clarification dialogues based on a database-domain hierarchy. It will be shown that the method enables the NLI lexicon to learn new lexical items at run time while the clarification dialogues, and it may provide the necessary information for generating informative answers to some particular failing user queries. Moreover, the method is an efficient means to handle queries with insufficience contextual cues. The examples throughout this work are drawn from FIFA 90, an experimental NLI to a soccer database.

We describe an approach for modelling a person's face for model-based coding. The goal is to estimate the 3D shape by combining the contour analysis and shading analysis of the human face image in order to increase the quality of the estimated 3D shape. The motivation for combining contour and shading cues comes from the observation that the shading cue leads to severe errors near the occluding boundary, while the occluding contour cue provides incomplete surface information in regions away from contours. Towards this, we use the deformable model as the common level of integration such that a higher-quality measurement will dominate the depth estimate. The feasibility of our approach is demonstrated using a real facial image.