This article proposes a dynamic linkage service which is a specific service model of integrated broadcast — broadband services based ATSC 3.0. The dynamic linkage service is useful to the viewer who wants to continue watching programs using TV or their personal devices, even after the terrestrial broadcast ends due to the start of the next regular programming. In addition, we verify the feasibility of the proposed extended dynamic linkage service through developed emulation system based on ATSC 3.0. In consideration of the personal network capabilities of the viewer environment, the service was tested with 4K/2K Ultra HD and receiving the service was finished within 4 second over intranet.

Authors had proposed a hybrid electromagnetic field analysis method suitable for an airport surface so far. In this paper, the hybrid method is validated by measurements by using a 1/50 scale-model of an airport considering several layouts of the buildings and sloping ground. The measured power distributions agreed with the analyzed ones within 5 dB errors excepting null points and the null positions of the distribution is also estimated within one wavelength errors.

We propose a novel non-orthogonal multiple access (NOMA)-based optimal multiplexing method for multiple downlink service channels to maximize the integrated system throughput. In the fifth generation (5G) mobile communication system, the support of various wireless communication services such as massive machine-type communications (mMTC), ultra-reliable low latency communications (URLLC), and enhanced mobile broadband (eMBB) is expected. These services will serve different numbers of terminals and have different requirements regarding the spectrum efficiency and fairness among terminals. Furthermore, different operators may have different policies regarding the overall spectrum efficiency and fairness among services. Therefore, efficient radio resource allocation is essential during the multiplexing of multiple downlink service channels considering these requirements. The proposed method achieves better system performance than the conventional orthogonal multiple access (OMA)-based multiplexing method thanks to the wider transmission bandwidth per terminal and inter-terminal interference cancellation using a successive interference canceller (SIC). Computer simulation results reveal that the effectiveness of the proposed method is especially significant when the system prioritizes the fairness among terminals (including fairness among services).

In this paper, we propose a radio frequency (RF) anti-aliasing filter design method considering the effect of a roll-off characteristic on a noise figure (NF) in the direct RF undersampling receiver. The proposed method is useful for broadband reception that a system bandwidth (BW) has nearly half of the sampling frequency (1/2 fs). When the system BW is extended nearly 1/2 fs, the roll-off band is out of the desired Nyquist zone and it affects NF additionally. The proposed method offers a design target regarding the roll-off characteristic not only the rejection ratio. The target is helpful as a design guide to meet the allowed NF. We design the filter based on the proposed method and it is applied to the direct RF undersampling on-board receiver for Ka-band high throughput satellite (HTS). The measured NF value of the implemented receiver almost matched the designed value. Moreover, the receiver achieved the reception bandwidth which is 90% of 1/2 fs.

This paper presents analysis results of the intermodulation distortion (IMD) components compensation conditions for dual-band feed-forward power amplifier (FFPA) when inputting dual-band signals simultaneously. The signal cancellation loop and distortion cancellation loop of the dual-band FFPA have frequency selective adjustment paths which consist of filter and vector regulator. The filter selects the desired frequency component and suppresses the undesired frequency component in the desired frequency selective adjustment path. The vector regulators repeatedly adjust the amplitude and phase values of the composite components for the desired and suppressed undesired frequency components. In this configuration, the cancellation levels of the signal cancellation loop and distortion cancellation loop are depending on the amplitude and phase errors of the vector regulator. The analysis results show that the amplitude and phase errors of the desired frequency component almost become independent that of the undesired frequency component in a weak non-linearity condition, when the isolation between the desired band and the undesired band given by the filter is more than 40 dB. The amplitude errors of the desired frequency component are dependent on that of the undesired frequency component in a strong non-linear conditions when the isolation level sets as above. A 1-W-class signal cancellation loop and 20-W-class FFPA are fabricated for 1.7-GHz and 2.1-GHz bands simultaneous operation. The experimental results show that the analysis results are suitable in the experimental conditions. From these investigations, the analysis results can provide a commercially available dual-band FFPA. To our best knowledge, this is first analysis results for the dual-band FFPA.

Broadband amplifiers have been used in modern wireless communication systems. However, the accompanying disadvantage is that there is more nonlinear interference in the available operating frequency band. In addition to the in-band intermodulation distortion which affecting adjacent frequency bands the most important is harmonic distortion. In this letter we present a robust and low complex digital harmonic canceling model called cross-disturbing harmonic (CDH) model for broadband power amplifiers (PAs). The approach introducing cross terms is used to enhance the robustness of the model, thereby significantly increase the stability of the system. The CDH model still has excellent performance when actively reducing the number of coefficients. Comparisons are conducted between the CDH model and the other state-of-the-art model called memory polynomial harmonic (MPM) model. Experimental results show that the CDH model can achieve comparable performance as the MPM model but with much fewer (43%) coefficients.

A method of determining emission limits was studied by using the amplitude probability distribution (APD) for low-probability pulsed electromagnetic disturbances due to discharge. The features of this method are 1) without using the previously reported relationship between APD and bit error rate, the limits are derived using the measured impact of a pulsed disturbance on various wireless communication systems having different bandwidths, and 2) disturbances caused by discharge with poor reproducibility are simulated by regularly repeated pulse-modulated sine waves to enable stable evaluation of the communication quality. APD-based limits are determined from the pulse repetition frequency of the simulated disturbance such that the block error rate (BLER) is less than a certain limit in wireless systems that are most sensitive to the pulsed disturbance. In the international standard CISPR 32 regulating electromagnetic disturbance, radiated disturbance due to discharge is excluded from the application of peak detection limits because of its low occurrence probability. In this paper we quantitatively determine appropriate criteria of the probability for the exclusion. Using the method, we measured the impact of low-probability pulsed interference on major wireless systems and found that GSM and Wi-Fi systems were the most sensitive. New APD-based limits were derived on the basis of these findings. The APD-based limits determined by the proposed method enable a valid evaluation of low-occurrence-probability pulsed disturbances without unconditionally excluding the measurement.

This paper presents an analysis of the relationship between noise and bandwidth in visible light communication (VLC) systems. In the past few years, pre-emphasis and post-equalization techniques were proposed to extend the bandwidth of VLC systems. However, these bandwidth extension techniques also influence noise and sensitivity of the VLC systems. In this paper, first, we build a system model of VLC transceivers and circuit models of pre-emphasis and post-equalization. Next, we theoretically compare the bandwidth and noise of three different transceiver structures comprising a single pre-emphasis circuit, a single post-equalization circuit and a combination of pre-emphasis and post-equalization circuits. Finally, we validate the presented theoretical analysis using experimental results. The result shows that for the same resonant frequency, and for high signal-to-noise ratio (S/N), VLC systems employing post-equalization or pre-emphasis have the same bandwidth extension ability. Therefore, a transceiver employing both the pre-emphasis and post-equalization techniques has a bandwidth √2 times the bandwidth of the systems employing only the pre-emphasis or post-equalization. Based on the theoretical analysis of noise, the VLC system with only active pre-emphasis shows the lowest noise, which is a good choice for low-noise systems. The result of this paper may provide a new perspective of noise and sensitivity of the bandwidth extension techniques in VLC systems.

A high-speed high-resolution sampling system is the crucial part in wideband radar receivers. A 10.4-GS/s 12-bit wideband sampling system based on TIADC technique is designed in this letter. The acquisition function is implemented on a VPX platform. The storage function is implemented on a standard 19-inch rack server. The sampled data is transmitted at high speed through optical fibers between them. A mixed calibration method based on perfect reconstruction is adopted to compensate channel mismatches of wideband TIADC system. For sinusoidal signals from 100MHz to 5000MHz, more than 46-dB SNDR and 56-dB SFDR can be obtained in this sampling system. This letter provides a high-speed and high-resolution acquisition scheme for direct intermediate frequency sampling wideband digital receivers.

This paper presents a real-time body motion classification system using the radio channel characteristics of a wearable body area network (BAN). We developed a custom wearable BAN radio channel measurement system by modifying an off-the-shelf ZigBee-based sensor network system, where the link quality indicator (LQI) values of the wireless links between the coordinator and four sensor nodes can be measured. After interpolating and standardizing the raw data samples in a pre-processing stage, the time-domain features are calculated, and the body motion is classified by a decision-tree based random forest machine learning algorithm which is most suitable for real-time processing. The features were carefully chosen to exclude those that exhibit the same tendency based on the mean and variance of the features to avoid overfitting. The measurements demonstrated successful real-time body motion classification and revealed the potential for practical use in various daily-life applications.

Massive MIMO is known as a promising technology for multiuser multiplexing in the fifth generation mobile communication system to accommodate the rapidly-increasing traffic. It has a large number of antenna elements and thus provides very sharp beams. As seen in hybrid beamforming, there have already been many papers on the concatenation of two precoders (beamformers). The inner precoder, i.e., a multi-beam former, performs a linear transformation between the element space and the beam space. The outer precoder forms nulls in the limited beam space spanned by selected beams to suppress the inter-user interference. In this two-step precoder, the beam shape is expected to determine the system performance. In this paper, we evaluate the achievable throughput performance for different beam-shaping schemes: a discrete Fourier transform (DFT) beam, Chebyshev weighted beams, and Taylor weighted beam. Simulations show that the DFT beam provides the best performance except the case of imperfect precoding and cell edge SNR of 30dB.

This paper reviews our developed wide band human body communication technology for wearable and implantable robot control. The wearable and implantable robots are assumed to be controlled by myoelectric signals and operate according to the operator's will. The signal transmission for wearable robot control was shown to be mainly realized by electrostatic coupling, and the signal transmission for implantable robot control was shown to be mainly determined by the lossy frequency-dependent dielectric properties of human body. Based on these basic observations on signal transmission mechanisms, we developed a 10-50MHz band impulse radio transceiver based on human body communication technology, and applied it for wireless control of a robotic hand using myoelectric signals in the first time. In addition, we also examined its applicability to implantable robot control, and evaluated the communication performance of implant signal transmission using a living swine. These experimental results showed that the proposed technology is well suited for detection and transmission of biological signals for wearable and implantable robot control.

Massive open online course (MOOC) is an online course aimed at unlimited participation and open access via the web. Although there are many MOOC providers, they typically focus on the online course providing and typically do not link with traditional education and business sector requirements. This paper presents a MOOC service framework that focuses on adopting MOOC to provide additional services to support students in traditional education and to provide credit bank consisting of student academic credentials for business sector demand. Particularly, it extends typical MOOC to support academic/ credential record and transcript issuance. The MOOC service framework consists of five layers: authentication, resources, learning, assessment and credential layers. We discuss the adoption of the framework in Thai MOOC, the national MOOC system for Thai universities. Several main issues related to the framework adoption are discussed, including the service strategy and model as well as infrastructure design for large-scale MOOC service.

A paradigm shift toward edge computing infrastructures that prioritize small footprint and scalable/easy-to-estimate performance is increasing. In this paper, we propose the following to improve the footprint and the scalability of systolic arrays: (1) column multithreading for reducing the number of physical units and maintaining the performance even for back-to-back floating-point accumulations; (2) a cascaded peer-to-peer AXI bus for a scalable multichip structure and an intra-chip parallel local memory bus for low latency; (3) multilevel loop control in any unit for reducing the startup overhead and adaptive operation shifting for efficient reuse of local memories. We designed a systolic array with a single column × 64 row configuration with Verilog HDL, evaluated the frequency and the performance on an FPGA attached to a ZYNQ system as an AXI slave device, and evaluated the area with a TSMC 28nm library and memory generator and identified the following: (1) the execution speed of a matrix multiplication/a convolution operation/a light-field depth extraction, whose size larger than the capacity of the local memory, is 6.3× / 9.2× / 6.6× compared with a similar systolic array (EMAX); (2) the estimated speed with a 4-chip configuration is 19.6× / 16.0× / 8.5×; (3) the size of a single-chip is 8.4 mm2 (0.31× of EMAX) and the basic performance per area is 2.4×.

Based on the License Assisted Access (LAA) small cell architecture, the LAA coexisting with Wi-Fi heterogeneous networks provide LTE mobile users with high bandwidth efficiency as the unlicensed channels are shared among LAA and Wi-Fi. However, the LAA and Wi-Fi will affect each other when both systems are using the same unlicensed channel in the heterogeneous networks. In such a network, unlicensed band allocation for LAA and Wi-Fi is an important issue that may affect the quality of service (QoS) of both systems significantly. In this paper, we propose an analytical model and conduct simulation experiments to study two allocations for the unlicensed band: unlicensed full allocation (UFA), unlicensed time-division allocation (UTA), and the corresponding buffering mechanism for the LAA data packets. We evaluate the performance for these unlicensed band allocations schemes in terms of the acceptance rate of both LAA and Wi-Fi packet data in LAA buffer queue. Our study provides guidelines for designing channel occupation phase and the buffer size of LAA small cell.

In this paper, we propose the low voltage CMOS current mode reference circuit using self-regulator with adaptive biasing technique. It drastically reduces the line sensitivity (LS) of the output voltage and the power supply voltage dependence of the temperature coefficient (TC). The self-regulator used in the proposed circuit adaptively generates the minimum voltage required the reference core circuit following the PVT (process, voltage and temperature) conditions. It makes possible to improve circuit performances instead of slightly increasing minimum power supply voltage. This proposed circuit has been designed and evaluated by SPICE simulation using TSMC 65nm CMOS process with 3.3V (2.5V over-drive) transistor option. From simulation results, LS is reduced to 0.0065%/V under 0.8V < VDD < 3.0V. TC is 67.6ppm/°C under the condition that the temperature range is from -40°C to 125°C and VDD range is from 0.8V to 3.0V. The power supply rejection ratio (PSRR) is less than -80.4dB when VDD is higher than 0.8V and the noise frequency is 100Hz. According to the simulation results, we could confirm that the performances of the proposed circuit are improved compared with the conventional circuit.

Because of its high throughput potentiality on short-range communications and inherent superiority of high precision on ranging and localization, ultra-wideband (UWB) technology has been attracting attention continuously in research and development (R&D) as well as in commercialization. The first domestic regulation admitting indoor UWB in Japan was released by the Ministry of Internal Affairs and Communications (MIC) in 2006. Since then, several revisions have been made in conjunction with UWB commercial penetration, emerging new trends of industrial demands, and coexistence evaluation with other wireless systems. However, it was not until May 2019 that MIC released a new revision to admit outdoor UWB. Meanwhile, the IEEE 802 LAN/MAN Standards Committee has been developing several UWB related standards or amendments accordingly for supporting different use cases. At the time when this paper is submitted, a new amendment known as IEEE 802.15.4z is undergoing drafting procedure which is expected to enhance ranging ability for impulse radio UWB (IR-UWB). In this paper, we first review the domestic UWB regulation and some of its revisions to get a picture of the domestic regulation transition from indoor to outdoor. We also foresee some anticipating changes in future revisions. Then, we overview several published IEEE 802 standards or amendments that are related to IR-UWB. Some features of IEEE 802.15.4z in drafting are also extracted from open materials. Finally, we show with our recent research results that time bias internal a transceiver becomes important for increasing localization accuracy.

This study evaluates the effects of some non-learning blind bandwidth extension (BWE) methods on state-of-the-art automatic speaker verification (ASV) systems. Recently, a non-linear bandwidth extension (N-BWE) method has been proposed as a blind, non-learning, and light-weight BWE approach. Other non-learning BWEs have also been developed in recent years. For ASV evaluations, most data available to train ASV systems is narrowband (NB) telephone speech. Meanwhile, wideband (WB) data have been used to train the state-of-the-art ASV systems, such as i-vector, d-vector, and x-vector. This can cause sampling rate mismatches when all datasets are used. In this paper, we investigate the influence of sampling rate mismatches in the x-vector-based ASV systems and how non-learning BWE methods perform against them. The results showed that the N-BWE method improved the equal error rate (EER) on ASV systems based on the x-vector when the mismatches were present. We researched the relationship between objective measurements and EERs. Consequently, the N-BWE method produced the lowest EERs on both ASV systems and obtained the lower RMS-LSD value and the higher STOI score.

The paper presents a low power, wideband operational trans-conductance amplifier (OTA) for applications to drive large capacitive loads. In order to satisfy the low static power dissipation, high-speed, while reserving high current driving capability, the complementary slew-rate enhancer in conjunction with a dual class AB input stage to improve the slew-rate of a rail-to-rail two-stage OTA is proposed. The proposed architecture was implemented using 0.5µm CMOS process with a supply voltage of 5V. The slew-rate can achieve 68V/µsec at static power dissipation of 0.9mW, which can be used to efficiently drive larger than 6 nF capacitive load. The measured output has a total harmonic distortion of less than 5%.

Microwave mammography is a promising alternative to X-ray based imaging modalities, because of its small size, low cost, and cell-friendly exposure. More importantly, this modality enables the suppression of surface reflection clutter, which can be enhanced by introducing accurate surface shape estimations. However, near-field measurements can reduce the shape estimation accuracy, due to a mismatch between the reference and observed waveforms. To mitigate this problem, this study incorporates envelope-based shape estimation and finite-difference time-domain (FDTD)-based waveform correction with a fractional derivative adjustment. Numerical simulations based on realistic breast phantoms derived from magnetic resonance imaging (MRI) show that the proposed method significantly enhances the accuracy of breast surface imaging and the performance of surface clutter rejection.