Using a single-site lightning location technique, a new portable lightning location system is developed. We incorporate an attitude detection technique using inertial sensors to detect an accurate electromagnetic field vector of sferics by palm-sized electromagnetic sensors which can have arbitrary attitude. The present paper describes the concept and the performance of the developed prototype of the portable system.

We propose preimage attacks against PKC98-Hash and HAS-V. PKC98-Hash is a 160-bit hash function proposed at PKC 1998, and HAS-V, a hash function proposed at SAC 2000, can produce hash values of 128+32k (k=0,1,...,6) bits. These hash functions adopt the Merkle-Damgård and Davies-Meyer constructions. One unique characteristic of these hash functions is that their step functions are not injective with a fixed message. We utilize this property to mount preimage attacks against these hash functions. Note that these attacks can work for an arbitrary number of steps. The best proposed attacks generate preimages of PKC98-Hash and HAS-V-320 in 264 and 2256 compression function computations with negligible memory, respectively. This is the first preimage attack against the full PKC98-Hash function.

Large capacity tags are becoming available to meet the demands of industry, but the UHF RFID protocol is unable to reliably and efficiently read large data sets from tags. First of all, large data sets are not well protected. The tag merely relies on 16-bit CRC for ensuring the validity of up to 4,096-bit user-specific data in EPCglobal C1G2 protocol. Furthermore, the reliability will be even worse if large capacity tags are implemented using semi-active technology which is likely to prevail among sensor-integrated RFID tags. Since semi-active tags greatly alleviate the performance limitation imposed by the turn-on power of the tag chip, backscattering signal of semi-active tags could be a serious challenge for most readers because it is much weaker than signals emitted by passive tags due to longer reading distance. In this paper, Interim CRC is presented to enhance transmission reliability and efficiency when the tag is backscattering a large data set. By taking advantage of Interim CRC, the large data set can be divided into several blocks, and 16-bit checksum is calculated over each block. The tag backscatters all blocks at the first time and only retransmits certain blocks if CRC error occurs in those blocks. The result of simulation shows that the reading error rate can be confined to a preset threshold and the accumulative total of transmitted data are greatly reduced if optimal block size and transmission times are complied with. The simulation also conclusively proves that semi-active tags derive even longer reading range from Interim CRC. In addition, Interim CRC is totally compliant with the EPCglobal C1G2 protocol. It fully makes use of CRC-16 encoder and does not involve any other data encoding schematics and hardware modifications.

This paper analyzes security of sequential multiple encryptions based on asymmetric key encryptions, and shows that a sequential construction of secure multiple encryptions exists. The sequential multiple encryption scheme can be proved to be indistinguishable against chosen ciphertext attacks for multiple encryptions (IND-ME-CCA), where the adversary can access to the decryption oracle of the multiple encryption, even when all the underlying encryptions of the multiple encryption are indistinguishable against chosen plaintext attacks (IND-CPA). We provide an extended security notion of sequential multiple encryptions, in which the adversary is allowed to access decryption oracles of the underlying encryptions in addition to the multiple encryption, and show that our constructed scheme satisfies the security notion when all the underlying encryptions are indistinguishable against chosen ciphertext attacks (IND-CCA).

Numerical analysis of the photoinductive (PI) field mapping technique for characterizing the eddy-current (EC) probes with tilted coils above a thin metal film was investigated using a two-dimensional transient finite element method (FEM). We apply the FEM model of PI method to observe the influence of metal film materials on the field-mapping images used to characterize EC probes. The effects of film thickness on the PI mapping signal are also shown and discussed. The simulation results using the proposed model showed that the PI signals largely depend on the thermal conductivity and the thickness of the thin metal film. The field-mapping signals using the appropriate actual metal film material for EC probe coil with 0°, 5°, 10°, 15°, and 20° tilt angle are also examined. We demonstrate that the higher resolution in field-mapping images of commercial EC probes can be obtained by given higher thermal conductivity and thinner thickness of metal film. The fundamental understanding of distinct field distribution will aid in the selection of the higher-quality EC probe for accurate inspection with EC testing.

This letter realizes direction of arrival (DOA) estimation by exploiting the noise subspace based estimator. Since single subspace feature extraction fails to achieve satisfactory results under unknown noise fields, we propose a two-step subspace feature extraction technique that is effective even in these fields. When a new noise subspace is attained, the proposed estimator without prewhitening can form the maximizing orthogonality especially for unknown noise fields. Simulation results confirm the effectiveness of the proposed technique.

An inter-vehicle communication system for the 720 MHz band that is designed to prevent car crashes at intersections has recently been proposed in Japan. This paper presents an analysis of the propagation characteristics of an intersection surrounded by concrete block walls in a residential area. The propagation characteristics were analyzed for the first time using the finite-difference time-domain (FDTD) method. We investigated the influence of wall thickness and source locations on the propagation characteristics. The results of our investigation showed that the most commonly used wall thickness and source locations do not strongly affect propagation loss. Furthermore, we analyzed the power delay profile and delay spread by taking into consideration the structure of the concrete block walls.

The 2-adic complexity of binary periodic sequences plays an important role in cryptology. In this paper, by means of the usual Fourier transform, we give a simpler form of the upper bound for 2-adic complexity than related result before. For pn-periodic sequences, we discuss the relation between sequences and their Fourier coefficients. Furthermore, based on the relation, we get the lower bound for the number of pn-periodic sequences with given 2-adic complexity.

This paper deals with the diffraction of a transverse magnetic (TM) plane wave by a perfectly conductive periodic surface by an integral method. However, it is known that a conventional integral method does not work for a critical angle of incidence, because of divergence of a periodic Green's function (integral kernel). To overcome such a divergence difficulty, we introduce an image Green's function which is physically defined as a field radiated from an infinite phased array of dipoles. By use of the image Green's function, it is newly shown that the diffracted field is represented as a sum of radiation from the periodic surface and its image surface. Then, this paper obtains a new image integral equation for the basic surface current, which is solved numerically. A numerical result is illustrated for a very rough sinusoidal surface. Then, it is concluded that the method of image Green's function works practically even at a critical angle of incidence.

An inductorless low noise amplifier (LNA) with active balun for digital TV (DTV) applications is presented. The LNA exploits a noise cancellation technique which allows for simultaneous wide-band impedance matching and low noise design. The matching and amplifier stages in the LNA topology perform single-ended to differential signal conversion with balanced output. The second and third-order nonlinearity of the individual amplifiers as well as the distortion caused by the interaction between the stages are suppressed to achieve high IIP2 and IIP3. A method for intrinsic cancellation of the second-order interaction is employed to reduce the dependence of the IIP3 on the frequency spacing between the interfering signals in the two-tone test of DTV tuners. Fabricated in a 0.18 µm CMOS technology, the LNA core size is 0.21 mm2. Measurements show that the LNA IIP3 and IIP2 are +12 dBm and +21 dBm, respectively. The IIP3 variation is less than 5 dB in the 10 MHz to 200 MHz frequency spacing range. A voltage gain of 14.5 dB and a noise figure below 4 dB are achieved in a frequency range from 100 MHz to 1 GHz. The LNA consumes 11 mA from a 1.8 V supply voltage.

In this paper, we propose a new Delay PUF architecture trying to solve the major problem of existing Delay PUFs that it is easy to predict the relation between delay information and generated information. For that purpose, our architecture exploits glitches as a source of information generation that behave non-linearly from delay variation between gates and the characteristic of pulse propagation of each gate. We thus call it the Glitch PUF. We present two circuit structures of the Glitch PUF both of which have their own merits. We then provide the results of evaluation in which we first verify that the two Glitch PUFs exhibit the same characteristics, and second show the randomness and statistical properties of the Glitch PUF.

Pairings on elliptic curves over finite fields are crucial for constructing various cryptographic schemes. The ηT pairing on supersingular curves over GF(3n) is particularly popular since it is efficiently implementable. Taking into account the Menezes-Okamoto-Vanstone attack, the discrete logarithm problem (DLP) in GF(36n) becomes a concern for the security of cryptosystems using ηT pairings in this case. In 2006, Joux and Lercier proposed a new variant of the function field sieve in the medium prime case, named JL06-FFS. We have, however, not yet found any practical implementations on JL06-FFS over GF(36n). Therefore, we first fulfill such an implementation and we successfully set a new record for solving the DLP in GF(36n), the DLP in GF(36·71) of 676-bit size. In addition, we also compare JL06-FFS and an earlier version, named JL02-FFS, with practical experiments. Our results confirm that the former is several times faster than the latter under certain conditions.

Emerging video surveillance technologies are based on foreground detection to achieve event detection automatically. Integration foreground detection with a modern multi-camera surveillance system can significantly increase the surveillance efficiency. The foreground detection often leads to high computational load and increases the cost of surveillance system when a mass deployment of end cameras is needed. This paper proposes a DSP-based foreground detection algorithm. Our algorithm incorporates a temporal data correlation predictor (TDCP) which can exhibit the correlation of data and reduce computation based on this correlation. With the DSP-oriented foreground detection, an adaptive frame rate control is developed as a low cost solution for multi-camera surveillance system. The adaptive frame rate control automatically detects the computational load of foreground detection on multiple video sources and adaptively tunes the TDCP to meet the real-time specification. Therefore, no additional hardware cost is required when the number of deployed cameras is increased. Our method has been validated on a demonstration platform. Performance can achieve real-time CIF frame processing for a 16-camera surveillance system by single-DSP chip. Quantitative evaluation demonstrates that our solution provides satisfied detection rate, while significantly reducing the hardware cost.

Wireless sensor networks are comprised of several sensor nodes that communicate via wireless technology. Locating the sensor nodes is a fundamental problem in developing applications for wireless sensor networks. In this paper, we introduce a distributed localization scheme, called the Rectangle Overlapping Approach (ROA), using a mobile beacon with GPS and a directional antenna. The node locations are computed by performing simple operations that rely on the rotation angle and position of the mobile beacon. Simulation results show that the proposed scheme is very efficient and that the node positions can be determined accurately when the beacon follows a random waypoint movement model.

In most existing warships combat simulation system, the tactics of a warship is manipulated by human operators. For this reason, the simulation results are restricted due to the capabilities of human operators. To deal with this, we have employed the genetic algorithm for supporting the evolutionary simulation environment. In which, the tactical decision by human operators is replaced by the human model with a rule-based chromosome for representing tactics so that the population of simulations are created and hundreds of simulation runs are continued on the basis of the genetic algorithm without any human intervention until finding emergent tactics which shows the best performance throughout the simulation. Several simulation tests demonstrate the techniques.

In Long-Term Evolution (LTE)-Advanced, a heterogeneous network in which femtocells and picocells overlay macrocells is being extensively discussed in addition to traditional well-planned macrocell deployment to improve further the system throughput. In heterogeneous network deployment, cell selection as well as inter-cell interference coordination (ICIC) is very important to improve the system and cell-edge throughput. Therefore, this paper investigates three cell selection methods associated with ICIC in heterogeneous networks in the LTE-Advanced downlink: Signal-to-interference plus noise power ratio (SINR)-based cell selection, reference signal received power (RSRP)-based cell selection, and reference signal received quality (RSRQ)-based cell selection. The results of simulations (4 picocells and 25 sets of user equipment are uniformly located within 1 macrocell) that assume a full buffer model show that the downlink cell and cell-edge user throughput levels of RSRP-based cell selection are degraded by approximately 2% and 11% compared to those for SINR-based cell selection under the condition of maximizing the cell-edge user throughput due to the impairment of the interference level. Furthermore, it is shown that the downlink cell-edge user throughput of RSRQ-based cell selection is improved by approximately 5%, although overall cell throughput is degraded by approximately 6% compared to that for SINR-based cell selection under the condition of maximizing the cell-edge user throughput.

A simple analytical model to predict the DC MOSFET behavior under electromagnetic interference (EMI) is presented. The model is able to describe the MOSFET performance in the linear and saturation regions under EMI disturbance applied to the gate. The model consists of a unique simple equivalent circuit based on a voltage dependent current source and a reduced number of parameters which can accurately predict the drift on the drain current due to the EMI source. The analytical approach has been validated by means of electric simulation and measurements and can be easily introduced in circuit simulators. The proposed modeling technique combined with the nth-power law model of the MOSFET without EMI, significantly improves its accuracy in comparison with the n-th power law directly applied to a MOSFET under EMI impact.

This paper presents a 65-nm CMOS 8-antenna array transmitter operating in 117–130-GHz range for short range and portable millimeter-wave (mm-wave) active imaging applications. Each antenna element is a new on-chip antenna located on the top metal. By using on-chip transformer, pulse output of each resistor-less mm-wave pulse generators (PG) are sent to each integrated antenna. To adjust pulse delays for the purpose of pulse beam-forming, a 7-bit digitally programmable delay circuit (DPDC) is added to each of PGs. Moreover, in order to dynamically adjust pulse delays among eight SW's outputs, we implemented on-chip jitter and relative skew measuring circuit with 20-bit digital output to achieve cumulative distribution (CDF) and probability density (PDF) functions from which DPDC's input codes are decided to align eight antenna's output pulses. Two measured radiation peaks after relative skew alignment are obtained at (θ; φ) angles of (-56; 0) and (+57; 0). Measurement results shows that beam-forming angles of the fully integrated antenna array can be adjusted by digital input codes and by the on-chip skew adjustment circuit for active imaging applications.

Forward error correction (FEC) is one of important and heavy tasks for wireless communication. Leading edge mobile embedded systems usually support not only one FEC standard, but multiple FEC standards in order to adapt to various wireless communication standards. In this paper, we propose two-stage configurable decoder model (2-Stage CDM) for multiple FEC standards for Viterbi and Turbo coding which have a variation under the constraint length, coding rate, etc. Proposed decoder model realizes a decoder instance which supports dedicated multiple FEC standards, and rapid design for domain specific decoder is realized. Proposed decoder model is configurable in two stages: at hardware generation time and at runtime, and designers can easily specify these specifications by various design parameters. Experimental results show proposed two-stage configurable decoder model supports various domain specific FEC decoder including existing decoder, and the decoder instances based on proposed 2-Stage CDM have sufficient throughput for each communication standard and reasonable area overhead compared with existing decoder.

To characterize and predict the dynamics of the nonlinear polarization rotation in SOAs, an experimental method based on the frequency response technique and a model based on the density matrix and effective index formalisms are presented. Both determine the angular displacement, at the Poincare Sphere, that produces the evolution of the polarization of the output signal.