Two types of similarities between words have been studied in the natural language processing community: synonymy and relational similarity. A high degree of similarity exist between synonymous words. On the other hand, a high degree of relational similarity exists between analogous word pairs. We present and empirically test a hypothesis that links these two types of similarities. Specifically, we propose a method to measure the degree of synonymy between two words using relational similarity between word pairs as a proxy. Given two words, first, we represent the semantic relations that hold between those words using lexical patterns. We use a sequential pattern clustering algorithm to identify different lexical patterns that represent the same semantic relation. Second, we compute the degree of synonymy between two words using an inter-cluster covariance matrix. We compare the proposed method for measuring the degree of synonymy against previously proposed methods on the Miller-Charles dataset and the WordSimilarity-353 dataset. Our proposed method outperforms all existing Web-based similarity measures, achieving a statistically significant Pearson correlation coefficient of 0.867 on the Miller-Charles dataset.

This paper is a report on a high ESD breakdown-voltage InP HBT transimpedance amplifier IC for optical video distribution systems. To make ESD breakdown-voltage higher, we designed ESD protection circuits integrated in the TIA IC using base-collector/base-emitter diodes of InP HBTs and resistors. These components for ESD protection circuits have already existed in the employed InP HBT IC process, so no process modifications were needed. Furthermore, to meet requirements for use in optical video distribution systems, we studied circuit design techniques to obtain a good input-output linearity and a low-noise characteristic. Fabricated InP HBT TIA IC exhibited high human-body-model ESD breakdown voltages (±1000 V for power supply terminals, ±200 V for high-speed input/output terminals), good input-output linearity (less than 2.9-% duty-cycle-distortion), and low noise characteristic (10.7 pA/ averaged input-referred noise current density) with a -3-dB-down higher frequency of 6.9 GHz. To the best of our knowledge, this paper is the first literature describing InP ICs with high ESD-breakdown voltages.

Large-signal-based nonlinear models are developed to analyze a variety of dynamic performances in a resonant tunneling diode (RTD) with peripheral circuits such as an integrated broad band bow-tie antenna, a bias circuit and a bias stabilizer circuit. Dynamic modes of the RTD are classified by the time-domain analysis with the model. On the basis of our model, we suggest a possibility to discuss a terahertz order oscillation mode control, and the ASK modulation in several tens Gbit/sec in the RTD with the broad band antenna. Validity of the model and analysis is shown by explaining measured results of modulated oscillation signals in fabricated triple-barrier RTDs.

The objective of pool-based incremental active learning is to choose a sample to label from a pool of unlabeled samples in an incremental manner so that the generalization error is minimized. In this scenario, the generalization error often hits a minimum in the middle of the incremental active learning procedure and then it starts to increase. In this paper, we address the problem of early labeling stopping in probabilistic classification for minimizing the generalization error and the labeling cost. Among several possible strategies, we propose to stop labeling when the empirical class-posterior approximation error is maximized. Experiments on benchmark datasets demonstrate the usefulness of the proposed strategy.

We report on the fabrication and analysis of basic digital circuits containing InAs nanowire transistors on a host substrate. The nanowires were assembled at predefined positions by means of electric field-assisted self-assembly within each run generating numerous circuits simultaneously. Inverter circuits composed of two separated nanowire transistors forming a driver and an active load have been fabricated. The inverter circuits exhibit a gain (>1) in the MHz regime and a time constant of about 0.9 ns. A sample & hold core element is fabricated based on an InAs nanowire transistor connected to a hold capacitor, both on a Silicon and an InP isolating substrate, respectively. The low leakage read-out of the hold capacitor is done by InP-based metal-insulator heterojunction FET grown on the same substrate prior to nanowire FET fabrication. Experimental operation of the circuit is demonstrated at 100 MHz sampling frequency. The presented approach enables III/V high-speed, low-voltage logic circuits on a wide variety of host substrates which may be up scaled to high volume circuits.

Current collapse of AlGaN/GaN heterostructure field-effect transistors (HFETs) formed on qualified epitaxial layers on Si substrates was successfully suppressed using graded field-plate (FP) structures. To improve the reproducibility of the FP structure manufacturing process, a simple process for linearly graded SiO2 profile formation was developed. An HFET with a graded FP structure exhibited a significant decrease in an on-resistance increase ratio of 1.16 even after application of a drain bias of 600 V.

Recently, a new image appearance model, named iCAM06, was developed for High-Dynamic-Range (HDR) image rendering. The dynamic range of a HDR image needs to be mapped onto the range of the output device where it will be displayed, this is called tone reproduction or tone mapping. iCAM06, a representative HDR rendering algorithm also uses tone compression for image reproduction on the dynamic range of output devices. However, iCAM06 causes a white point shift during its tone compression process. Therefore, we propose a compensation method for white point shifts using corrected channel gain. Experiment results show that the proposed method has better performance than iCAM06.

Our research is focused on examining a stereoscopic quality assessment model for stereoscopic images with disparate quality in left and right images for glasses-free stereo vision. In this paper, we examine the objective assessment model of 3-D images, considering the difference in image quality between each view-point generated by the disparity-compensated coding. A overall stereoscopic image quality can be estimated by using only predicted values of left and right 2-D image qualities based on the MPEG-7 descriptor information without using any disparity information. As a result, the stereoscopic still image quality is assessed with high prediction accuracy with correlation coefficient=0.98 and average error=0.17.

This paper presents measurement results of bit error rate (BER) and soft error rate (SER) improvement on 150-nm FD-SOI 7T/14T (7-transistor/ 14-transistor) SRAM test chips. The reliability of the 7T/14T SRAM can be dynamically changed by a control signal depending on an operating condition and application. The 14T dependable mode allocates one bit in a 14T cell and improves the BER in a read operation and SER in a retention state, simultaneously. We investigate its error rate mitigating mechanisms using Synopsys TCAD simulator. In our measurements, the minimum operating voltage was improved by 100 mV, the alpha-induced SER was suppressed by 80.0%, and the neutron-induced SER was decreased by 34.4% in the 14T dependable mode over the 7T normal mode.

The propagation of messages among a group of people, which forms opportunistic Disruption Tolerant Networking (DTN), can be modeled as dynamic graph with links joining every two nodes up and down at a stationary speed. As people in DTN might have different probabilities of sending messages to each other, they should be divided into distinct groups with different link generate speed λ and link perish speed µ. In this letter, we focus on the two-group case, and apply Edge-Markovian Dynamic Graphs to present an analysis framework to evaluate the average delay for the information dissemination in DTN. We also give extensive simulation and numerical results revealing the influence of various parameters.

Distributed applications and services have become pervasive in our society due to the widespread use of internet and mobile devices. There are urgent demands to efficiently ensure safety and correctness of such software. A session-type system is a framework to statically check whether communication descriptions conform to certain protocols. They are shown to be effective yet simple enough to fit in harmony with existing programming languages. In the original session type system, the subject reduction property does not hold. This paper establishes a conservative extension of the original session type system with the subject reduction property. Finally, it is also shown that our typing rule properly extends the set of typeable processes.

This paper proposes a novel satellite channel allocation algorithm for a demand assigned multiple access (DAMA) controller. In satellite communication systems, the channels' total bandwidth and total power are limited by the satellite's transponder bandwidth and transmission power (satellite resources). Our algorithm is based on multi-carrier transmission and adaptive modulation methods. It optimizes channel elements such as the number of sub-carriers, modulation level, and forward error correction (FEC) coding rate. As a result, the satellite's transponder bandwidth and transmission power can be simultaneously used to the maximum and the overall system capacity, i.e., total transmission bit rate, will increase. Simulation results show that our algorithm increases the overall system capacity by 1.3 times compared with the conventional fixed modulation algorithm.

Ultra-wideband (UWB) pulse radars have a definite advantage in high-range resolution imaging, and are suitable for short-range measurements, particularly at disaster sites or security scenes where optical sensors are rarely suitable because of dust or strong backlighting. Although we have already proposed an accurate imaging algorithm called Range Points Migration (RPM), its reconstructible area is too small to identify the shape of an object if it is far from the radar and the size of the aperture is inadequate. To resolve this problem, this paper proposes a novel image expansion method based on ellipse extrapolation; it enhances extrapolation accuracy by deriving direct estimates of the observed range points distributed in the data space. Numerical validation shows that the proposed method accurately extrapolates part of the target boundary, even if an extremely small region of the target boundary is obtained by RPM.

In this paper, we present a speech enhancement technique based on the ambient noise classification that incorporates the Gaussian mixture model (GMM). The principal parameters of the statistical model-based speech enhancement algorithm such as the weighting parameter in the decision-directed (DD) method and the long-term smoothing parameter of the noise estimation, are set according to the classified context to ensure best performance under each noise. For real-time context awareness, the noise classification is performed on a frame-by-frame basis using the GMM with the soft decision framework. The speech absence probability (SAP) is used in detecting the speech absence periods and updating the likelihood of the GMM.

This letter investigates the training convergence in range-based cooperative positioning with stochastic positional knowledge. Firstly, a closed-form of squared position-error bound (SPEB) is derived with error-free ranging. Using the derived closed-form, it is proved that the SPEB reaches its minimum when at least 2 out of N (> 2) agents send training sequences. Finally, numerical results are provided to elaborate the theoretical analysis with zero-mean Gaussian ranging errors.

Light trail architecture is attracting attention as a new optical wavelength-division multiplexing network architecture that can be built with currently available devices and can achieve bandwidth allocation with granularity finer than a wavelength. Because a light trail is a shared medium, we need a medium access control (MAC) protocol to prevent collisions. Although MAC protocols using token passing can prevent collisions, the bandwidths of links that are located upstream of the token holding node are kept idle. We first propose a dynamic light trail splitting method for increasing throughput of a light trail by using such idle bandwidths. Our method splits a trail into upstream and downstream trails at the token holding node, and independent data transmission on the two trails are permitted. As a result, we expect that the split trail architecture will achieve higher throughput than the original non-split trail architecture. The degree of performance improvement with the split trail architecture depends on how appropriately we determine the upstream and downstream token holding times of every transmission node. Thus, we formulate a problem in which we optimize the token holding times to accommodate requested traffic volume as a linear programming problem. We then derive the throughput of the split trail architecture by solving the problem using the NUOPT solver and investigate the degree of improvement over the original architecture. In addition, we evaluate the end-to-end delay of the split trail architecture by simulation. According to numerical examples, the split trail architecture achieves 1) almost the same throughput as the original one for the worst-case traffic pattern where every transmission node sends data to the terminating node of the trail only, 2) about 1.6 times higher throughput for a uniform traffic pattern where every node pair requests the same traffic volume and an extremely unbalanced traffic pattern where only a few node pairs request huge traffic volume, 3) about 1.9 time higher throughput for the split trail architecture's good-case traffic pattern where every transmission node sends data to its adjacent downstream node only, and 4) the end-to-end delay enough to satisfy any application's QoS requirement according to ITU-T Recommendation Y.1541.

In this letter, we provide an asymptotic error rate performance evaluation of space-time block codes from coordinate interleaved orthogonal designs (STBCs-CIODs), especially in shadowed Rayleigh fading channels. By evaluating a simplified probability density function (PDF) of Rayleigh and Rayleigh-lognormal channels affecting the STBC-CIOD system, we derive an accurate closed-form approximation for the tight upper and lower bounds on the symbol error rate (SER). We show that shadowing asymptotically affects coding gain only, and conclude that an increase in diversity order under shadowing causes slower convergence to asymptotic bound due to the relatively larger loss of coding gain. By comparing the derived formulas and Monte-Carlo simulations, we validate the accuracy of the theoretical results.

In this paper, a dual-band bandpass filter (BPF) of multilayer suspended stripline (SSL) structure and an SSL diplexer composed of a low-pass filter (LPF) and a high-pass filter (HPF) are proposed. Bandstop structure creating transmission zeros is adopted in the BPF and diplexer, enhancing the signal selectivity of the former and increasing the isolation between the diverting ports of the latter. The dual-band BPF possesses two distinct bandpass structures and a bandstop circuit, all laid on different metallic layers. The metallic layers together with the supporting substrates are vertically stacked up to save the circuit dimension. The LPF and HPF used in the diplexer structure are designed by a quasi-lumped approach, which the LC lumped-elements circuit models are developed to analyze filters' characteristics and to emulate their frequency responses. Half-wavelength resonating slots are employed in the diplexer's structure to increase the isolation between its two signal diverting ports. Experiments are conducted to verify the multilayer dual-band BPF and the diplexer design. Agreements are observed between the simulation and the measurement.

This letter considers a two-way relaying network where two nodes exchange their information based on the principle of physical layer network coding (PNC). We study the amplify-and-forward (AF) relay filter design with multiple-input multiple-output (MIMO) system. In order to maximize the sum-rate for information exchange, we propose a relay filter for two-way relaying network. Simulation results show that the proposed scheme performs better than the conventional schemes for two-way relay channel.

This paper proposes a new three-mode resonator, which consists of a parallel-coupled microstrip line resonator embedded with a slotline resonator, and develops a compact low-loss bandpass filter (BPF) with a sharp roll-off response because of four transmission zeros (TZ) located very near the passband. Resonance mechanism and properties of the three modes are first analyzed by using an eigen-mode analysis, and then an equivalent circuit model is established for expressing a novel coupling scheme of the developed BPF. It is made clear from the results of circuit analysis that the four TZs are produced because of multiple paths between the input/output stub lines formed by the three resonant modes and the direct source/load coupling. The validity of the proposed resonator and filter is supported by the comparison between simulated and measured results.