Pengxu JIANG Yang YANG Yue XIE Cairong ZOU Qingyun WANG
Convolutional neural network (CNN) is widely used in acoustic scene classification (ASC) tasks. In most cases, local convolution is utilized to gather time-frequency information between spectrum nodes. It is challenging to adequately express the non-local link between frequency domains in a finite convolution region. In this paper, we propose a dual-path convolutional neural network based on band interaction block (DCNN-bi) for ASC, with mel-spectrogram as the model’s input. We build two parallel CNN paths to learn the high-frequency and low-frequency components of the input feature. Additionally, we have created three band interaction blocks (bi-blocks) to explore the pertinent nodes between various frequency bands, which are connected between two paths. Combining the time-frequency information from two paths, the bi-blocks with three distinct designs acquire non-local information and send it back to the respective paths. The experimental results indicate that the utilization of the bi-block has the potential to improve the initial performance of the CNN substantially. Specifically, when applied to the DCASE 2018 and DCASE 2020 datasets, the CNN exhibited performance improvements of 1.79% and 3.06%, respectively.
Gyulim KIM Hoojin LEE Xinrong LI Seong Ho CHAE
This letter studies the secrecy outage probability (SOP) and the secrecy diversity order of Alamouti STBC with decision feedback (DF) detection over the time-selective fading channels. For given temporal correlations, we have derived the exact SOPs and their asymptotic approximations for all possible combinations of detection schemes including joint maximum likehood (JML), zero-forcing (ZF), and DF at Bob and Eve. We reveal that the SOP is mainly influenced by the detection scheme of the legitimate receiver rather than eavesdropper and the achievable secrecy diversity order converges to two and one for JML only at Bob (i.e., JML-JML/ZF/DF) and for the other cases (i.e., ZF-JML/ZF/DF, DF-JML/ZF/DF), respectively. Here, p-q combination pair indicates that Bob and Eve adopt the detection method p ∈ {JML, ZF, DF} and q ∈ {JML, ZF, DF}, respectively.
Kota CHIN Keita EMURA Shingo SATO Kazumasa OMOTE
In an open-bid auction, a bidder can know the budgets of other bidders. Thus, a sealed-bid auction that hides bidding prices is desirable. However, in previous sealed-bid auction protocols, it has been difficult to provide a “fund binding” property, which would guarantee that a bidder has funds more than or equal to the bidding price and that the funds are forcibly withdrawn when the bidder wins. Thus, such protocols are vulnerable to a false bidding. As a solution, many protocols employ a simple deposit method in which each bidder sends a deposit to a smart contract, which is greater than or equal to the bidding price, before the bidding phase. However, this deposit reveals the maximum bidding price, and it is preferable to hide this information. In this paper, we propose a sealed-bid auction protocol that provides a fund binding property. Our protocol not only hides the bidding price and a maximum bidding price, but also provides a fund binding property, simultaneously. For hiding the maximum bidding price, we pay attention to the fact that usual Ethereum transactions and transactions for sending funds to a one-time address have the same transaction structure, and it seems that they are indistinguishable. We discuss how much bidding transactions are hidden. We also employ DECO (Zhang et al., CCS 2020) that proves the validity of the data to a verifier in which the data are taken from a source without showing the data itself. Finally, we give our implementation which shows transaction fees required and compare it to a sealed-bid auction protocol employing the simple deposit method.
Fumihiko TACHIBANA Huy CU NGO Go URAKAWA Takashi TOI Mitsuyuki ASHIDA Yuta TSUBOUCHI Mai NOZAWA Junji WADATSUMI Hiroyuki KOBAYASHI Jun DEGUCHI
Although baud-rate clock and data recovery (CDR) such as Mueller-Müller (MM) CDR is adopted to ADC-based receivers (RXs), it suffers from false-lock points when the RXs handle PAM4 data pattern because of the absence of edge data. In this paper, a false-lock-aware locking scheme is proposed to address this issue. After the false-lock-aware locking scheme, a clock phase is adjusted to achieve maximum eye height by using a post-1-tap parameter for an FFE in the CDR loop. The proposed techniques are implemented in a 56-Gb/s PAM4 transceiver. A PLL uses an area-efficient “glasses-shaped” inductor. The RX comprises an AFE, a 28-GS/s 7-bit time-interleaved SAR ADC, and a DSP with a 31-tap FFE and a 1-tap DFE. A TX is based on a 7-bit DAC with a 4-tap FFE. The transceiver is fabricated in 16-nm CMOS FinFET technology, and achieves a BER of less than 1e-7 with a 30-dB loss channel. The measurement results show that the MM CDR escapes from false-lock points, and converges to near the optimum point for large eye height.
Masayoshi YOSHIMURA Atsuya TSUJIKAWA Toshinori HOSOKAWA
In recent years, to meet strict time-to-market constraints, it has become difficult for only one semiconductor design company to design a VLSI. Thus, design companies purchase IP cores from third-party IP vendors and design only the necessary parts. On the other hand, since IP cores have the disadvantage that copyright infringement can be easily performed, logic locking has to be applied to them. Functional logic locking methods using TTLock are resilient to SAT attacks however vulnerable to FALL attacks. Additionally, it is difficult to design logic locking based on TTLock at the gate level. This paper proposes a logic locking method, CRLock, based on SAT attack and FALL attack resistance at the register transfer level. The CRLock is a logic locking method for controllers at RTL in which the designer selects a protected input pattern and modifies the controller based on the protection input pattern. In experimental results, we applied CRLock to MCNC'91 benchmark circuits and showed that all circuits are resistant to SAT and FALL attacks.
Vu-Trung-Duong LE Hoai-Luan PHAM Thi-Hong TRAN Yasuhiko NAKASHIMA
Blockchain-based Internet of Things (IoT) applications require flexible, fast, and low-power hashing hardware to ensure IoT data integrity and maintain blockchain network confidentiality. However, existing hashing hardware poses challenges in achieving high performance and low power and limits flexibility to compute multiple hash functions with different message lengths. This paper introduces the flexible and energy-efficient crypto-processor (FECP) to achieve high flexibility, high speed, and low power with high hardware efficiency for blockchain-based IoT applications. To achieve these goals, three new techniques are proposed, namely the crypto arithmetic logic unit (Crypto-ALU), dual buffering extension (DBE), and local data memory (LDM) scheduler. The experiments on ASIC show that the FECP can perform various hash functions with a power consumption of 0.239-0.676W, a throughput of 10.2-3.35Gbps, energy efficiency of 4.44-14.01Gbps/W, and support up to 8916-bit message input. Compared to state-of-art works, the proposed FECP is 1.65-4.49 times, 1.73-21.19 times, and 1.48-17.58 times better in throughput, energy efficiency, and energy-delay product (EDP), respectively.
Chained Block is one of Nikoli's pencil puzzles. We study the computational complexity of Chained Block puzzles. It is shown that deciding whether a given instance of the Chained Block puzzle has a solution is NP-complete.
Longle CHENG Xiaofeng LI Haibo TAN He ZHAO Bin YU
Blockchain systems rely on peer-to-peer (P2P) overlay networks to propagate transactions and blocks. The node management of P2P networks affects the overall performance and reliability of the system. The traditional structure is based on random connectivity, which is known to be an inefficient operation. Therefore, we propose MSLT, a multiscale blockchain P2P network node management method to improve transaction performance. This approach involves configuring the network to operate at multiple scales, where blockchain nodes are grouped into different ranges at each scale. To minimize redundancy and manage traffic efficiently, neighboring nodes are selected from each range based on a predetermined set of rules. Additionally, a node updating method is implemented to improve the reliability of the network. Compared with existing transmission models in efficiency, utilization, and maximum transaction throughput, the MSLT node management model improves the data transmission performance.
Kairi TOKUDA Takehiro SATO Eiji OKI
Mobile edge computing (MEC) is a key technology for providing services that require low latency by migrating cloud functions to the network edge. The potential low quality of the wireless channel should be noted when mobile users with limited computing resources offload tasks to an MEC server. To improve the transmission reliability, it is necessary to perform resource allocation in an MEC server, taking into account the current channel quality and the resource contention. There are several works that take a deep reinforcement learning (DRL) approach to address such resource allocation. However, these approaches consider a fixed number of users offloading their tasks, and do not assume a situation where the number of users varies due to user mobility. This paper proposes Deep reinforcement learning model for MEC Resource Allocation with Dummy (DMRA-D), an online learning model that addresses the resource allocation in an MEC server under the situation where the number of users varies. By adopting dummy state/action, DMRA-D keeps the state/action representation. Therefore, DMRA-D can continue to learn one model regardless of variation in the number of users during the operation. Numerical results show that DMRA-D improves the success rate of task submission while continuing learning under the situation where the number of users varies.
Javier Jose DIAZ RIVERA Waleed AKBAR Talha AHMED KHAN Afaq MUHAMMAD Wang-Cheol SONG
Zero Trust Networking (ZTN) is a security model where no default trust is given to entities in a network infrastructure. The first bastion of security for achieving ZTN is strong identity verification. Several standard methods for assuring a robust identity exist (E.g., OAuth2.0, OpenID Connect). These standards employ JSON Web Tokens (JWT) during the authentication process. However, the use of JWT for One Time Token (OTT) enrollment has a latent security issue. A third party can intercept a JWT, and the payload information can be exposed, revealing the details of the enrollment server. Furthermore, an intercepted JWT could be used for enrollment by an impersonator as long as the JWT remains active. Our proposed mechanism aims to secure the ownership of the OTT by including the JWT as encrypted metadata into a Non-Fungible Token (NFT). The mechanism uses the blockchain Public Key of the intended owner for encrypting the JWT. The blockchain assures the JWT ownership by mapping it to the intended owner's blockchain public address. Our proposed mechanism is applied to an emerging Zero Trust framework (OpenZiti) alongside a permissioned Ethereum blockchain using Hyperledger Besu. The Zero Trust Framework provides enrollment functionality. At the same time, our proposed mechanism based on blockchain and NFT assures the secure distribution of OTTs that is used for the enrollment of identities.
Robin KAESBACH Marcel VAN DELDEN Thomas MUSCH
Precision microwave measurement systems require highly stable oscillators with both excellent long-term and short-term stability. Compared to components used in laboratory instruments, dielectric resonator oscillators (DRO) offer low phase noise with greatly reduced mechanical complexity. To further enhance performance, phase-locked loop (PLL) stabilization can be used to eliminate drift and provide precise frequency control. In this work, the design of a low-cost DRO concept is presented and its performance is evaluated through simulations and measurements. An open-loop phase noise of -107.2 dBc/Hz at 10 kHz offset frequency and 12.8 GHz output frequency is demonstrated. Drift and phase noise are reduced by a PLL, so that a very low jitter of under 29.6 fs is achieved over the entire operating bandwidth.
Non-orthogonal multiple access (NOMA), which combines multiple user signals and transmits the combined signal over one channel, can achieve high spectral efficiency for mobile communications. However, combining the multiple signals can lead to degradation of bit error rates (BERs) of NOMA under severe channel conditions. In order to improve the BER performance of NOMA, this paper proposes a new NOMA scheme based on orthogonal space-time block codes (OSTBCs). The proposed scheme transmits several multiplexed signals over their respective orthogonal time-frequency channels, and can gain diversity effects due to the orthogonality of OSTBC. Furthermore, the new scheme can detect the user signals using low-complexity linear detection in contrast with the conventional NOMA. The paper focuses on the Alamouti code, which can be considered the simplest OSTBC, and theoretically analyzes the performance of the linear detection. Computer simulations under the condition of the same bit rate per channel show that the Alamouti code based scheme using two channels is superior to the conventional NOMA using one channel in terms of BER performance. As shown by both the theoretical and simulation analyses, the linear detection for the proposed scheme can maintain the same BER performance as that of the maximum likelihood detection, when the two channels have the same frequency response and do not bring about any diversity effects, which can be regarded as the worst case.
Sangyeop LEE Shuhei AMAKAWA Takeshi YOSHIDA Minoru FUJISHIMA
This paper presents a divide-by-9 injection-locked frequency divider (ILFD). It can lock onto about 6-GHz input with a locking range of 3.23GHz (58%). The basic concept of the ILFD is based on employing self-gated multiple inputs into the multiple-stage ring oscillator. A wide lock range is also realized by adapting harmonic-control circuits, which can boost specific harmonics generated by mixing. The ILFD was fabricated using a 55-nm deeply depleted channel (DDC) CMOS process. It occupies an area of 0.0210mm2, and consumes a power of 14.4mW.
Tatsuya KOBAYASHI Keita YASUTOMI Naoki TAKADA Shoji KAWAHITO
This paper presents a high-NIR sensitivity SOI-gate lock-in pixel with improved modulation contrast. The proposed pixel has a shallow buried channel and intermediate gates to create both a high lateral electric field and a potential barrier to parasitic light sensitivity. Device simulation results showed that parasitic light sensitivity reduced from 13.7% to 0.13% compared to the previous structure.
A feedback node set (FNS) of a graph is a subset of the nodes of the graph whose deletion makes the residual graph acyclic. By finding an FNS in an interconnection network, we can set a check point at each node in it to avoid a livelock configuration. Hence, to find an FNS is a critical issue to enhance the dependability of a parallel computing system. In this paper, we propose a method to find FNS's in n-pancake graphs and n-burnt pancake graphs. By analyzing the types of cycles proposed in our method, we also give the number of the nodes in the FNS in an n-pancake graph, (n-2.875)(n-1)!+1.5(n-3)!, and that in an n-burnt pancake graph, 2n-1(n-1)!(n-3.5).
Peer-to-peer (P2P) technology has gained popularity as a way to enhance system performance. Nodes in a P2P network work together by providing network resources to one another. In this study, we examine the use of P2P technology for video streaming and develop a distributed incentive mechanism to prevent free-riding. Our proposed solution combines WebTorrent and the Solana blockchain and can be accessed through a web browser. To incentivize uploads, some of the received video chunks are encrypted using AES. Smart contracts on the blockchain are used for third-party verification of uploads and for managing access to the video content. Experimental results on a test network showed that our system can encrypt and decrypt chunks in about 1/40th the time it takes using WebRTC, without affecting the quality of video streaming. Smart contracts were also found to quickly verify uploads in about 860 milliseconds. The paper also explores how to effectively reward virtual points for uploads.
Veeramani KARTHIKA Suresh JAGANATHAN
Considering the growth of the IoT network, there is a demand for a decentralized solution. Incorporating the blockchain technology will eliminate the challenges faced in centralized solutions, such as i) high infrastructure, ii) maintenance cost, iii) lack of transparency, iv) privacy, and v) data tampering. Blockchain-based IoT network allows businesses to access and share the IoT data within their organization without a central authority. Data in the blockchain are stored as blocks, which should be validated and added to the chain, for this consensus mechanism plays a significant role. However, existing methods are not designed for IoT applications and lack features like i) decentralization, ii) scalability, iii) throughput, iv) faster convergence, and v) network overhead. Moreover, current blockchain frameworks failed to support resource-constrained IoT applications. In this paper, we proposed a new consensus method (WoG) and a lightweight blockchain framework (iLEDGER), mainly for resource-constrained IoT applications in a permissioned environment. The proposed work is tested in an application that tracks the assets using IoT devices (Raspberry Pi 4 and RFID). Furthermore, the proposed consensus method is analyzed against benign failures, and performance parameters such as CPU usage, memory usage, throughput, transaction execution time, and block generation time are compared with state-of-the-art methods.
With the rise of social network service (SNS) in recent years, the security of SNS users' private information has been a concern for the public. However, due to the anonymity of SNS, identity impersonation is hard to be detected and prevented since users are free to create an account with any username they want. This could lead to cybercrimes like fraud because impersonation allows malicious users to steal private information. Until now, there are few studies about this problem, and none of them can perfectly handle this problem. In this paper, based on an idea from previous work, we combine blockchain technology and security protocol to prevent impersonation in SNS. In our scheme, the defects of complex and duplicated operations in the previous work are improved. And the authentication work of SNS server is also adjusted to resist single-point, attacks. Moreover, the smart contract is introduced to help the whole system runs automatically. Afterward, our proposed scheme is implemented and tested on an Ethereum test network and the result suggests that it is acceptable and suitable for nowadays SNS network.
Takeshi MIYAMAE Fumihiko KOZAKURA Makoto NAKAMURA Masanobu MORINAGA
The total number of solar power-producing facilities whose Feed-in Tariff (FIT) Program-based ten-year contracts will expire by 2023 is expected to reach approximately 1.65 million in Japan. If the facilities that produce or consume renewable energy would increase to reach a large number, e.g., two million, blockchain would not be capable of processing all the transactions. In this work, we propose a blockchain-based electricity-tracking platform for renewable energy, called ‘ZGridBC,’ which consists of mutually cooperative two novel decentralized schemes to solve scalability, storage cost, and privacy issues at the same time. One is the electricity production resource management, which is an efficient data management scheme that manages electricity production resources (EPRs) on the blockchain by using UTXO tokens extended to two-dimension (period and electricity amount) to prevent double-spending. The other is the electricity-tracking proof, which is a massive data aggregation scheme that significantly reduces the amount of data managed on the blockchain by using zero-knowledge proof (ZKP). Thereafter, we illustrate the architecture of ZGridBC, consider its scalability, security, and privacy, and illustrate the implementation of ZGridBC. Finally, we evaluate the scalability of ZGridBC, which handles two million electricity facilities with far less cost per environmental value compared with the price of the environmental value proposed by METI (=0.3 yen/kWh).
Kensuke NAKAJIMA Hironobu YAMADA Mihoko TAKEDA
Direct-current superconducting quantum interference device (dc-SQUID) based on intrinsic Josephson junction (IJJ) has been fabricated using Bi2Sr2CaCu2O8+δ (Bi-2212) films grown on MgO substrates with surface steps. The superconducting loop parallel to the film surface across the step edge contains two IJJ stacks along the edge. The number of crystallographically stacked IJJ for each SQUIDs were 40, 18 and 3. Those IJJ SQUIDs except for one with 40 stacked IJJs revealed clear periodic modulation of the critical current for the flux quanta through the loops. It is anticipated that phase locking of IJJ has an effect on the modulation depth of the IJJ dc-SQUID.