In this paper, we propose a hybrid crystal oscillator which achieves both quick startup and low steady-state power consumption. At startup, a large negative resistance is realized by configuring a Pierce oscillating circuit with a multi-stage inverter amplifier, resulting in high-speed startup. During steady-state oscillation, the oscillator is reconfigured as a class-C complementary Colpitts circuit for low power consumption and low phase noise. Prototype chips were fabricated in 65nm CMOS process technology. With Pierce-type configuration, the measured startup time and startup energy of the oscillator are reduced to 1/11 and 1/5, respectively, compared with the one without Pierce-type configuration. The power consumption during steady oscillation is 30 µW.

Question-answering tasks over structured knowledge (i.e., tables and graphs) require the ability to encode structural information. Traditional pre-trained language models trained on linear-chain natural language cannot be directly applied to encode tables and graphs. The existing methods adopt the pre-trained models in such tasks by flattening structured knowledge into sequences. However, the serialization operation will lead to the loss of the structural information of knowledge. To better employ pre-trained transformers for structured knowledge representation, we propose a novel structure-aware transformer (SATrans) that injects the local-to-global structural information of the knowledge into the mask of the different self-attention layers. Specifically, in the lower self-attention layers, SATrans focus on the local structural information of each knowledge token to learn a more robust representation of it. In the upper self-attention layers, SATrans further injects the global information of the structured knowledge to integrate the information among knowledge tokens. In this way, the SATrans can effectively learn the semantic representation and structural information from the knowledge sequence and the attention mask, respectively. We evaluate SATrans on the table fact verification task and the knowledge base question-answering task. Furthermore, we explore two methods to combine symbolic and linguistic reasoning for these tasks to solve the problem that the pre-trained models lack symbolic reasoning ability. The experiment results reveal that the methods consistently outperform strong baselines on the two benchmarks.

In this paper, we propose a low-complexity and accurate noise suppression based on an a priori SNR (Speech to Noise Ratio) model for greater robustness w.r.t. short-term noise-fluctuation. The a priori SNR, the ratio of speech spectra and noise spectra in the spectral domain, represents the difference between speech features and noise features in the feature domain, including the mel-cepstral domain and the logarithmic power spectral domain. This is because logarithmic operations are used for domain conversions. Therefore, an a priori SNR model can easily be expressed in terms of the difference between the speech model and the noise model, which are modeled by the Gaussian mixture models, and it can be generated with low computational cost. By using a priori SNRs accurately estimated on the basis of an a priori SNR model, it is possible to calculate accurate coefficients of noise suppression filters taking into account the variance of noise, without serious increase in computational cost over that of a conventional model-based Wiener filter (MBW). We have conducted in-car speech recognition evaluation using the CENSREC-2 database, and a comparison of the proposed method with a conventional MBW showed that the recognition error rate for all noise environments was reduced by 9%, and that, notably, that for audio-noise environments was reduced by 11%. We show that the proposed method can be processed with low levels of computational and memory resources through implementation on a digital signal processor.

6G research has been extensively conducted by individual organizations as well as pre-competitive joint research initiatives. One of the joint initiatives is the Hexa-X European 6G flagship project. This paper shares the up-to-date deliverables through which Hexa-X is envisioning the 6G era. The Hexa-X deliverables presented in this paper encompass the overall 6G vision, use cases and technical enablers. The latest deliverables on tenets of 6G architectural design and central pillars of technical enablers are presented. In conclusion, the authors encourage joint research and PoC collaboration with Japanese industry, academia and research initiatives for the potential technical enablers presented in this paper, aimed at global harmonization towards 6G standards.

In recent years, the market size for internet advertising has been increasing with the expansion of the Internet. Among the internet advertising technologies, affiliate services, which are a performance-based service, use cookies to track and measure the performance of affiliates. However, for the purpose of safeguarding personal information, cookies tend to be regulated, which leads to concerns over whether normal tracking by cookies works as intended. Therefore, in this study, the recent problems from the perspectives of affiliates, affiliate service providers, and advertisers are extracted, and a framework of cookie-independent measuring engagement method using access logs is proposed and open issues are discussed for future affiliate services.

Wireless technology improvements have been continually increasing, resulting in greater needs for system design and implementation to accommodate all newly emerging standards. As a result, developing a system that ensures compatibility with numerous wireless systems has sparked interest. As a result of their flexibility and scalability over alternative wireless design options, software-defined radios (SDRs) are highly motivated for wireless device modelling. This research paper delves into the difficulties of designing a reconfigurable multi modulation baseband modulator for SDR systems that can handle a variety of wireless protocols. This research paper has proposed an area-efficient Reconfigurable Baseband Modulator (RBM) model to accomplish multi modulation scheme and resolve the adaptability and flexibility issues with the wide range of wireless standards. This also presents the feasibility of using a multi modulation baseband modulator to maximize adaptability with the least possible computational complexity overhead in the SDR system for next-generation wireless communication systems and provides parameterization. Finally, the re-configurability is evaluated concerning the appropriate symbols generations and analyzed its performance metrics through hardware synthesize results.

In this letter, we propose a feature-based knowledge distillation scheme which transfers knowledge between intermediate blocks of teacher and student with flow-based architecture, specifically Normalizing flow in our implementation. In addition to the knowledge transfer scheme, we examine how configuration of the distillation positions impacts on the knowledge transfer performance. To evaluate the proposed ideas, we choose two knowledge distillation baseline models which are based on Normalizing flow on different domains: CS-Flow for anomaly detection and SRFlow-DA for super-resolution. A set of performance comparison to the baseline models with popular benchmark datasets shows promising results along with improved inference speed. The comparison includes performance analysis based on various configurations of the distillation positions in the proposed scheme.

Series-connection of resonant-tunneling diodes (RTDs) has been considered to be efficient in upgrading the output power when it is introduced to oscillator architecture. This work is for clarifying the same architecture also contributes to increasing oscillation frequency because the device parasitic capacitance is reduced M times for M series-connected RTD oscillator. Although this mechanism is expected to be universal, we restrict the discussion to the recently proposed multiphase oscillator utilizing an RTD oscillator lattice loop. After explaining the operation principle, we evaluate how the oscillation frequency depends on the number of series-connected RTDs through full-wave calculations. In addition, the essential dynamics were validated experimentally in breadboarded multiphase oscillators using Esaki diodes in place of RTDs.

The issue of a low minority class identification rate caused by data imbalance in anomaly detection tasks is addressed by the proposal of a GAN-SR-based intrusion detection model for industrial control systems. First, to correct the imbalance of minority classes in the dataset, a generative adversarial network (GAN) processes the dataset to reconstruct new minority class training samples accordingly. Second, high-dimensional feature extraction is completed using stacked asymmetric depth self-encoder to address the issues of low reconstruction error and lengthy training times. After that, a random forest (RF) decision tree is built, and intrusion detection is carried out using the features that SNDAE retrieved. According to experimental validation on the UNSW-NB15, SWaT and Gas Pipeline datasets, the GAN-SR model outperforms SNDAE-SVM and SNDAE-KNN in terms of detection performance and stability.

Lead bromide-based perovskite organic-inorganic quantum-well films incorporated polycyclic aromatic chromophores into the organic layer (in other words, hybrid quantum-wells combined lead bromide semiconductor and organic semiconductors) were prepared by use of the spin-coating technique from the DMF solution in which PbBr2 and alkyl ammonium bromides which were linked polycyclic aromatics, pyrene, phenanthrene, and anthracene. When the pyrene-linked methyl ammonium bromide, which has a relatively small molecular cross-section with regard to the inorganic semiconductor plane, was employed, a lead bromide-based perovskite structure was successfully formed in the spin-coated films. When the phenanthrene-linked and anthracene-linked ammonium bromides, whose chromophore have large molecular cross-sections, were employed, lead bromide-based perovskite structures were not formed. However, the introduction of longer alkyl chains into the aromatics-linked ammonium bromides made it possible to form the perovskite structure.

Conventional enzymatic biofuel cells (EBFCs) use glucose solution or glucose from human body. It is desirable to get glucose from a substance containing glucose because the glucose concentration can be kept at the optimum level. This work developed a biofuel cell that generates electricity from cellulose, which is the main components of plants, by using decomposing enzyme of cellulase. Cellulose nanofiber (CNF) was chosen for the ease of decomposability. It was confirmed by the cyclic voltammetry method that cellulase was effective against CNF. The maximum output of the optimized proposed method was 38.7 μW/cm2, which was 85% of the output by using the glucose solution at the optimized concentration.

Direct-current superconducting quantum interference device (dc-SQUID) based on intrinsic Josephson junction (IJJ) has been fabricated using Bi2Sr2CaCu2O8+δ (Bi-2212) films grown on MgO substrates with surface steps. The superconducting loop parallel to the film surface across the step edge contains two IJJ stacks along the edge. The number of crystallographically stacked IJJ for each SQUIDs were 40, 18 and 3. Those IJJ SQUIDs except for one with 40 stacked IJJs revealed clear periodic modulation of the critical current for the flux quanta through the loops. It is anticipated that phase locking of IJJ has an effect on the modulation depth of the IJJ dc-SQUID.

Intrinsic Josephson junctions (IJJs) in the high-Tc cuprate superconductors have several fascinating properties, which are superior to the usual Josephson junctions obtained from conventional superconductors with low Tc, as follows; (1) a very thin thickness of the superconducting layers, (2) a strong interaction between junctions since neighboring junctions are closely connected in an atomic scale, (3) a clean interface between the superconducting and insulating layers, realized in a single crystal with few disorders. These unique properties of IJJs can enlarge the applicable areas of the superconducting qubits, not only the increase of qubit-operation temperature but the novel application of qubits including the macroscopic quantum states with internal degree of freedom. I present a comprehensive review of the phase dynamics in current-biased IJJs and argue the challenges of superconducting qubits utilizing IJJs.

To obtain a full picture of potential applications for propagation-delay based X channels, it is important to obtain all feasible schemes of cyclic interference alignment including the encoder, channel instance, and decoder. However, when the dimension goes larger, theoretical analysis about this issue will become tedious and even impossible. In this letter, we propose a computer-aided solution by searching the channel space and the scheduling space, which can find all feasible schemes in details. Examples are given for some typical X channels. Computational complexity is further analyzed.

In this paper, a metadata-based quality-estimation model is proposed for tile-based omnidirectional video streaming services, aiming to realize quality monitoring during service provision. In the tile-based omnidirectional video (ODV) streaming services, the ODV is divided into tiles, and the high-quality tiles and the low-quality tiles are distributed in accordance with the user's viewing direction. When the user changes the viewing direction, the user temporarily watches video with the low-quality tiles. In addition, the longer the time (delay time) until the high-quality tile for the new viewing direction is downloaded, the longer the viewing time of video with the low-quality tile, and thus the delay time affects quality. From the above, the video quality of the low-quality tiles and the delay time significantly impact quality, and these factors need to be considered in the quality-estimation model. We develop quality-estimation models by extending the conventional quality-estimation models for 2D adaptive streaming. We also show that the quality-estimation model using the bitrate, resolution, and frame rate of high- and low-quality tiles and that the delay time has sufficient estimation accuracy based on the results of subjective quality evaluation experiments.

We have designed a near-infrared wavelength Si/CaF2 DFB quantum cascade laser and investigated the possibility of single-mode laser oscillation by analysis of the propagation mode, gain, scattering time of Si quantum well, and threshold current density. As the waveguide and resonator, a slab-type waveguide structure with a Si/CaF2 active layer sandwiched by SiO2 on a Si (111) substrate and a grating structure in an n-Si conducting layer were assumed. From the results of optical propagation mode analysis, by assuming a λ/4-shifted bragg waveguide structure, it was found that the single vertical and horizontal TM mode propagation is possible at the designed wavelength of 1.70µm. In addition, a design of the active layer is proposed and its current injection capability is roughly estimated to be 25.1kA/cm2, which is larger than required threshold current density of 1.4kA/cm2 calculated by combining analysis results of the scattering time, population inversion, gain of quantum cascade lasers, and coupling theory of a Bragg waveguide. The results strongly indicate the possibility of single-mode laser oscillation.

The acquisition of distant sound has always been a hot research topic. Since sound is caused by vibration, one of the best methods for measuring distant sound is to use a laser Doppler vibrometer (LDV). This laser has high directivity, that enables it to acquire sound from far away, which is of great practical use for disaster relief and other situations. However, due to the vibration characteristics of the irradiated object itself and the reflectivity of its surface (or other reasons), the acquired sound is often lacking frequency components in certain frequency bands and is mixed with obvious noise. Therefore, when using LDV to acquire distant speech, if we want to recognize the actual content of the speech, it is necessary to enhance the acquired speech signal in some way. Conventional speech enhancement methods are not generally applicable due to the various types of degradation in observed speech. Moreover, while several speech enhancement methods for LDV have been proposed, they are only effective when the irradiated object is known. In this paper, we present a speech enhancement method for LDV that can deal with unknown irradiated objects. The proposed method is composed of noise reduction, pitch detection, power spectrum envelope estimation, power spectrum reconstruction, and phase estimation. Experimental results demonstrate the effectiveness of our method for enhancing the acquired speech with unknown irradiated objects.

This article presents a 28GHz high-accuracy phase and amplitude detection circuit for dual-polarized phased-array calibration. With dual-polarized calibration scheme, external LO signal is not required for calibration. The proposed detection circuit detects phase and amplitude independently, using PDC and ADC. By utilizing a 28GHz-to-140kHz downconversion scheme, the phase and amplitude are detected more accurately. In addition, reference signal for PDC and ADC is generated from 28GHz LO signal with divide-by-6 dual-step-mixing injection locked frequency divider (ILFD). This ILFD achieves 24.5-32.5GHz (28%) locking range with only 3.0mW power consumption and 0.01mm2 area. In the measurement, the detection circuit achieves phase and amplitude detections with RMS errors of 0.17degree and 0.12dB, respectively. The total power consumption of the proposed circuit is 59mW with 1-V supply voltage.

Identity-based encryption with equality test (IBEET) is a generalization of the traditional identity-based encryption (IBE) and public key searchable encryption, where trapdoors enable users to check whether two ciphertexts of distinct identities are encryptions of the same plaintext. By definition, IBEET cannot achieve indistinguishability security against insiders, i.e., users who have trapdoors. To address this issue, IBEET against insider attacks (IBEETIA) was later introduced as a dual primitive. While all users of IBEETIA are able to check whether two ciphertexts are encryptions of the same plaintext, only users who have tokens are able to encrypt plaintexts. Hence, IBEETIA is able to achieve indistinguishability security. On the other hand, the definition of IBEETIA weakens the notion of IBE due to its encryption inability. Nevertheless, known schemes of IBEETIA made use of rich algebraic structures such as bilinear groups and lattices. In this paper, we propose a generic construction of IBEETIA without resorting to rich algebraic structures. In particular, the only building blocks of the proposed construction are symmetric key encryption and pseudo-random permutations in the standard model. If a symmetric key encryption scheme satisfies CCA security, our proposed IBEETIA scheme also satisfies CCA security.

The hardness of the syndrome decoding problem (SDP) is the primary evidence for the security of code-based cryptosystems, which are one of the finalists in a project to standardize post-quantum cryptography conducted by the U.S. National Institute of Standards and Technology (NIST-PQC). Information set decoding (ISD) is a general term for algorithms that solve SDP efficiently. In this paper, we conducted a concrete analysis of the time complexity of the latest ISD algorithms under the limitation of memory using the syndrome decoding estimator proposed by Esser et al. As a result, we present that theoretically nonoptimal ISDs, such as May-Meurer-Thomae (MMT) and May-Ozerov, have lower time complexity than other ISDs in some actual SDP instances. Based on these facts, we further studied the possibility of multiple parallelization for these ISDs and proposed the first GPU algorithm for MMT, the multiparallel MMT algorithm. In the experiments, we show that the multiparallel MMT algorithm is faster than existing ISD algorithms. In addition, we report the first successful attempts to solve the 510-, 530-, 540- and 550-dimensional SDP instances in the Decoding Challenge contest using the multiparallel MMT.