The purpose of Facial Beauty Prediction (FBP) is to automatically assess facial attractiveness based on human aesthetics. Most neural network-based prediction methods do not consider the ranking information in the task. For scoring tasks like facial beauty prediction, there is abundant ranking information both between images and within images. Reasonable utilization of these information during training can greatly improve the performance of the model. In this paper, we propose a novel end-to-end Convolutional Neural Network (CNN) model based on ranking information of images, incorporating a Rank Module and an Adaptive Weight Module. We also design pairwise ranking loss functions to fully leverage the ranking information of images. Considering training efficiency and model inference capability, we choose ResNet-50 as the backbone network. We conduct experiments on the SCUT-FBP5500 dataset and the results show that our model achieves a new state-of-the-art performance. Furthermore, ablation experiments show that our approach greatly contributes to improving the model performance. Finally, the Rank Module with the corresponding ranking loss is plug-and-play and can be extended to any CNN model and any task with ranking information. Code is available at https://github.com/nehcoah/Rank-Info-Net.

In recent years, measuring biomagnetic fields in the Earth’s field by differential measurements of scalar-mode OPMs have been actively attempted. In this study, the sensitivity of the scalar-mode OPMs under the geomagnetic environment in the laboratory was studied by numerical simulation. Although the noise level of the scalar-mode OPM in the laboratory environment was calculated to be 104 pT/$\sqrt{\mathrm{Hz}}$, the noise levels using the first-order and the second-order differential configurations were found to be 529 fT/cm/$\sqrt{\mathrm{Hz}}$ and 17.2 fT/cm2/$\sqrt{\mathrm{Hz}}$, respectively. This result indicated that scalar-mode OPMs can measure very weak magnetic fields such as MEG without high-performance magnetic shield roomns. We also studied the operating conditions by varying repetition frequency and temperature. We found that scalar-mode OPMs have an upper limit of repetition frequency and temperature, and that the repetition frequency should be set below 4 kHz and the temperature should be set below 120°C.

With maturation of 5G technology in recent years, multimedia services such as live video streaming and online games on the Internet have flourished. These multimedia services frequently require low latency, which pose a significant challenge to compute the high latency requirements multimedia tasks. Mobile edge computing (MEC), is considered a key technology solution to address the above challenges. It offloads computation-intensive tasks to edge servers by sinking mobile nodes, which reduces task execution latency and relieves computing pressure on multimedia devices. In order to use MEC paradigm reasonably and efficiently, resource allocation has become a new challenge. In this paper, we focus on the multimedia tasks which need to be uploaded and processed in the network. We set the optimization problem with the goal of minimizing the latency and energy consumption required to perform tasks in multimedia devices. To solve the complex and non-convex problem, we formulate the optimization problem as a distributed deep reinforcement learning (DRL) problem and propose a federated Dueling deep Q-network (DDQN) based multimedia task offloading and resource allocation algorithm (FDRL-DDQN). In the algorithm, DRL is trained on the local device, while federated learning (FL) is responsible for aggregating and updating the parameters from the trained local models. Further, in order to solve the not identically and independently distributed (non-IID) data problem of multimedia devices, we develop a method for selecting participating federated devices. The simulation results show that the FDRL-DDQN algorithm can reduce the total cost by 31.3% compared to the DQN algorithm when the task data is 1000 kbit, and the maximum reduction can be 35.3% compared to the traditional baseline algorithm.

In this study, we introduce a reservoir-based one-dimensional (1D) convolutional neural network that processes time-series data at a low computational cost, and investigate its performance and training time. Experimental results show that the proposed network consumes lower training computational costs and that it outperforms the conventional reservoir computing in a sound-classification task.

Crowdsourcing becomes a popular data-collection method to relieve the burden of high cost and latency for data-gathering. Since the involved users in crowdsourcing are volunteers, need incentives to encourage them to provide data. However, the current incentive mechanisms mostly pay attention to the data quantity, while ignoring the data quality. In this paper, we design a Data-quality awaRe IncentiVe mEchanism (DRIVE) for collaborative tasks based on the Stackelberg game to motivate users with high quality, the highlight of which is the dynamic reward allocation scheme based on the proposed data quality evaluation method. In order to guarantee the data quality evaluation response in real-time, we introduce the mobile edge computing framework. Finally, one case study is given and its real-data experiments demonstrate the superior performance of DRIVE.

When a mathematical model is not available for a dynamical system, it is reasonable to use a data-driven approach for analysis and control of the system. With this motivation, the authors have recently developed a data-driven solution to Lyapunov equations, which uses not the model but the data of several state trajectories of the system. However, the number of state trajectories to uniquely determine the solution is O(n2) for the dimension n of the system. This prevents us from applying the method to a case with a large n. Thus, this paper proposes a novel class of data-driven Lyapunov equations, which requires a smaller amount of data. Although the previous method constructs one scalar equation from one state trajectory, the proposed method constructs three scalar equations from any combination of two state trajectories. Based on this idea, we derive data-driven Lyapunov equations such that the number of state trajectories to uniquely determine the solution is O(n).

In cyber-physical systems (CPSs) that interact between physical and information components, there are many sensors that are connected through a communication network. In such cases, the reduction of communication costs is important. Event-triggered control that the control input is updated only when the measured value is widely changed is well known as one of the control methods of CPSs. In this paper, we propose a design method of output feedback controllers with decentralized event-triggering mechanisms, where the notion of uniformly ultimate boundedness is utilized as a control specification. Using this notion, we can guarantee that the state stays within a certain set containing the origin after a certain time, which depends on the initial state. As a result, the number of times that the event occurs can be decreased. First, the design problem is formulated. Next, this problem is reduced to a BMI (bilinear matrix inequality) optimization problem, which can be solved by solving multiple LMI (linear matrix inequality) optimization problems. Finally, the effectiveness of the proposed method is presented by a numerical example.

Self-dithered digital delta-sigma modulators (DDSMs) are commonly used in fractional-N frequency synthesizers due to their ability to eliminate unwanted spurs from the synthesizer’s spectra without requiring additional hardware. However, when operating with a low-bit input, self-dithered DDSMs can still suffer from spurious tones at certain inputs. In this paper, we propose a self-dithered MASH 1-1-1-1 structure to mitigate the spur issue in the self-dithered MASH DDSMs. The proposed self-dithered MASH 1-1-1-1 suppresses the spurs with shaped dithering and achieves 4th order noise shaping.

With the recent advances in IoT, there is a growing interest in multi-surface computing, where a mobile app can cooperatively utilize multiple devices' surfaces. We propose a novel framework that seamlessly augments mobile apps with multi-surface computing capabilities. It enables various apps to employ multiple surfaces with acceptable performance.

Cloud computing has become the mainstream computing paradigm nowadays. More and more data owners (DO) choose to outsource their data to a cloud service provider (CSP), who is responsible for data management and query processing on behalf of DO, so as to cut down operational costs for the DO.  However, in real-world applications, CSP may be untrusted, hence it is necessary to authenticate the query result returned from the CSP.  In this paper, we consider the problem of approximate string query result authentication in the context of database outsourcing. Based on Merkle Hash Tree (MHT) and Trie, we propose an authenticated tree structure named MTrie for authenticating approximate string query results. We design efficient algorithms for query processing and query result authentication. To verify effectiveness of our method, we have conducted extensive experiments on real datasets and the results show that our proposed method can effectively authenticate approximate string query results.

ARM chips with low energy consumption and low-cost investment have been rapidly applied to smart office and smart entertainment including cloud mobile phones and cloud games. This paper first summarizes key technologies and development status of the above scenarios including CPU, memory, IO hardware virtualization characteristics, ARM hypervisor and container, GPU virtualization, network virtualization, resource management and remote transmission technologies. Then, in view of the current lack of publicly referenced ARM cloud constructing solutions, this paper proposes and constructs an implementation framework for building an ARM cloud, and successively focuses on the formal definition of virtualization framework, Android container system and resource quota management methods, GPU virtualization based on API remoting and GPU pass-through, and the remote transmission technology. Finally, the experimental results show that the proposed model and corresponding component implementation methods are effective, especially, the pass-through mode for virtualizing GPU resources has higher performance and higher parallelism.

Adiabatic logic circuits are regarded as one of the most attractive solutions for low-power circuit design. This study is dedicated to optimizing the design of the Two-Level Adiabatic Logic (2LAL) circuit, which boasts a relatively simple structure and superior low-power performance among many asymptotically adiabatic or quasi-adiabatic logic families, but suffers from a large number of timing buffers for “decompute”. Our focus is on the “early decompute” technique for fully pipelined 2LAL, and we propose two ILP approaches for minimizing hardware cost through optimization of early decompute. In the first approach, the problem is formulated as a kind of scheduling problem, while it is reformulated as node selection problem (stable set problem). The performance of the proposed methods are evaluated using several benchmark circuits from ISCAS-85, and the maximum 70% hardware reduction is observed compared with an existing method.

Approximate computing (AC) saves energy and improves performance by introducing approximation into computation in error-torrent applications. This work focuses on an AC strategy that accurately performs important computations and approximates others. In order to make AC circuits practical, we need to determine which computation is how important carefully, and thus need to appropriately approximate the redundant computation for maintaining the required computational quality. In this paper, we focus on the importance of computations at the flip-flop (FF) level and propose a novel importance evaluation methodology. The key idea of the proposed methodology is a two-step fault injection algorithm to extract the near-optimal set of redundant FFs in the circuit. In the first step, the proposed methodology performs the FI simulation for each FF and extracts the candidates of redundant FFs. Then, in the second step, the proposed methodology extracts the set of redundant FFs in a binary search manner. Thanks to the two-step strategy, the proposed algorithm reduces the complexity of architecture exploration from an exponential order to a linear order without understanding the functionality and behavior of the target application program. Experimental results show that the proposed methodology identifies the candidates of redundant FFs depending on the given constraints. In a case study of an image processing accelerator, the truncation for identified redundant FFs reduces the circuit area by 29.6% and saves power dissipation by 44.8% under the ASIC implementation while satisfying the PSNR constraint. Similarly, the dynamic power dissipation is saved by 47.2% under the FPGA implementation.

Distributed computing is one of the powerful solutions for computational tasks that need the massive size of dataset. Lagrange coded computing (LCC), proposed by Yu et al. [15], realizes private and secure distributed computing under the existence of stragglers, malicious workers, and colluding workers by using an encoding polynomial. Since the encoding polynomial depends on a dataset, it must be updated every arrival of new dataset. Therefore, it is necessary to employ efficient algorithm to construct the encoding polynomial. In this paper, we propose Newton coded computing (NCC) which is based on Newton interpolation to construct the encoding polynomial. Let K, L, and T be the number of data, the length of each data, and the number of colluding workers, respectively. Then, the computational complexity for construction of an encoding polynomial is improved from O(L(K+T)log 2(K+T)log log (K+T)) for LCC to O(L(K+T)log (K+T)) for the proposed method. Furthermore, by applying the proposed method, the computational complexity for updating the encoding polynomial is improved from O(L(K+T)log 2(K+T)log log (K+T)) for LCC to O(L) for the proposed method.

Information-theoretic security and computational security are fundamental paradigms of security in the theory of cryptography. The two paradigms interact with each other but have shown different progress, which motivates us to explore the intersection between them. In this paper, we focus on Multi-Party Computation (MPC) because the security of MPC is formulated by simulation-based security, which originates from computational security, even if it requires information-theoretic security. We provide several equivalent formalizations of the security of MPC under a semi-honest model from the viewpoints of information theory and statistics. The interpretations of these variants are so natural that they support the other aspects of simulation-based security. Specifically, the variants based on conditional mutual information and sufficient statistics are interesting because security proofs for those variants can be given by information measures and factorization theorem, respectively. To exemplify this, we show several security proofs of BGW (Ben-Or, Goldwasser, Wigderson) protocols, which are basically proved by constructing a simulator.

Multivariate public key cryptosystems (MPKC) are constructed based on the problem of solving multivariate quadratic equations (MQ problem). Among various multivariate schemes, UOV is an important signature scheme since it is underlying some signature schemes such as MAYO, QR-UOV, and Rainbow which was a finalist of NIST PQC standardization project. To analyze the security of a multivariate scheme, it is necessary to analyze the first fall degree or solving degree for the system of polynomial equations used in specific attacks. It is known that the first fall degree or solving degree often relates to the Hilbert series of the ideal generated by the system. In this paper, we study the Hilbert series of the UOV scheme, and more specifically, we study the Hilbert series of ideals generated by quadratic polynomials used in the central map of UOV. In particular, we derive a prediction formula of the Hilbert series by using some experimental results. Moreover, we apply it to the analysis of the reconciliation attack for MAYO.

Public key authenticated encryption with keyword search (PAEKS) has been proposed, where a sender's secret key is required for encryption, and a trapdoor is associated with not only a keyword but also the sender. This setting allows us to prevent information leakage of keyword from trapdoors. Liu et al. (ASIACCS 2022) proposed a generic construction of PAEKS based on word-independent smooth projective hash functions (SPHFs) and PEKS. In this paper, we propose a new generic construction of PAEKS, which is more efficient than Liu et al.'s in the sense that we only use one SPHF, but Liu et al. used two SPHFs. In addition, for consistency we considered a security model that is stronger than Liu et al.'s. Briefly, Liu et al. considered only keywords even though a trapdoor is associated with not only a keyword but also a sender. Thus, a trapdoor associated with a sender should not work against ciphertexts generated by the secret key of another sender, even if the same keyword is associated. That is, in the previous definitions, there is room for a ciphertext to be searchable even though the sender was not specified when the trapdoor is generated, that violates the authenticity of PAKES. Our consistency definition considers a multi-sender setting and captures this case. In addition, for indistinguishability against chosen keyword attack (IND-CKA) and indistinguishability against inside keyword guessing attack (IND-IKGA), we use a stronger security model defined by Qin et al. (ProvSec 2021), where an adversary is allowed to query challenge keywords to the encryption and trapdoor oracles. We also highlight several issues associated with the Liu et al. construction in terms of hash functions, e.g., their construction does not satisfy the consistency that they claimed to hold.

Secure two-party computation is a cryptographic tool that enables two parties to compute a function jointly without revealing their inputs. It is known that any function can be realized in the correlated randomness (CR) model, where a trusted dealer distributes input-independent CR to the parties beforehand. Sometimes we can construct more efficient secure two-party protocol for a function g than that for a function f, where g is a restriction of f. However, it is not known in which case we can construct more efficient protocol for domain-restricted function. In this paper, we focus on the size of CR. We prove that we can construct more efficient protocol for a domain-restricted function when there is a “good” structure in CR space of a protocol for the original function, and show a unified way to construct a more efficient protocol in such case. In addition, we show two applications of the above result: The first application shows that some known techniques of reducing CR size for domain-restricted function can be derived in a unified way, and the second application shows that we can construct more efficient protocol than an existing one using our result.

Chained Block is one of Nikoli's pencil puzzles. We study the computational complexity of Chained Block puzzles. It is shown that deciding whether a given instance of the Chained Block puzzle has a solution is NP-complete.

This paper proposes a non-linear overloaded MIMO detector that outperforms the conventional soft-input maximum likelihood detector (MLD) with less computational complexity. We propose iterative log-likelihood ratio (LLR) estimation and multi stage LLR estimation for the proposed detector to achieve such superior performance. While the iterative LLR estimation achieves better BER performance, the multi stage LLR estimation makes the detector less complex than the conventional soft-input maximum likelihood detector (MLD). The computer simulation reveals that the proposed detector achieves about 0.6dB better BER performance than the soft-input MLD with about half of the soft-input MLD's complexity in a 6×3 overloaded MIMO OFDM system.