Hirokazu YAMAKURA Gilbert SIY CHING Yukiko KISHIKI Noboru SEKINO Ichiro OSHIMA Tetsuro IMAI
In this study, we investigate outdoor propagation measurements performed in an industrial park environment at 28.3GHz band. The propagation characteristics were evaluated with the measurement result regarding the path loss characteristics. Ray tracing simulation was also studied and compared with the measurement data to evaluate the quantitative accuracy of ray tracing in millimeter-wave band wireless propagations. Ray tracing, whose accuracy was evaluated based on a comparison with the measurement results, can aid in the theoretical design of the coverage area and deterministic channel modeling.
In this paper, millimeter wave (mmWave) filtenna arrays for 5G applications are proposed. Two kinds of 2-element subarrays are designed for horizontal and vertical polarizations. Each subarray consists of three substrate integrated waveguide (SIW) cavities and two sets of stacked patches. Fully-shielded combined eighth-mode SIW (FSD-CEMSIW) cavities are used in the filtenna design. This cavity not only works as the first-stage resonator but also as the power divider for the subarray. As a result, a four-order bandpass filtering response is achieved. Filtenna arrays were fabricated and measured for demonstration. The impedance bandwidths of these subarrays cover 24-30GHz, including the 5G mmWave bands (n257, n258, and n261) with measured average gains of 8.2dBi and more than 22dB out-of-band suppression. The proposed antennas can be good candidates for 5G mmWave communication to reduce the system complexity and potential cost of the mmWave front-ends.
Pengfei LV Xiaosheng YU Jianning CHI Chengdong WU
A robust saliency detection approach for images with a complex background is proposed. The absorbing Markov chain integrating low-level, mid-level and high-level cues dynamically evolves by using the similarity between pixels to detect saliency objects. The experimental results show that the proposed algorithm has advantages in saliency detection, especially for images with a chaotic background or low contrast.
Recently, the performances of discriminative correlation filter (CF) trackers are getting better and better in visual tracking. In this paper, we propose spatial-temporal regularization with precise state estimation based on discriminative correlation filter (STPSE) in order to achieve more significant tracking performance. First, we consider the continuous change of the object state, using the information from the previous two filters for training the correlation filter model. Here, we train the correlation filter model with the hand-crafted features. Second, we introduce update control in which average peak-to-correlation energy (APCE) and the distance between the object locations obtained by HOG features and hand-crafted features are utilized to detect abnormality of the state around the object. APCE and the distance indicate the reliability of the filter response, thus if abnormality is detected, the proposed method does not update the scale and the object location estimated by the filter response. In the experiment, our tracker (STPSE) achieves significant and real-time performance with only CPU for the challenging benchmark sequence (OTB2013, OTB2015, and TC128).
At present, the application of different types of memristors in electronics is being deeply studied. Given the nonlinearity characterizing memristors, a circuit with memristors cannot be treated by classical circuit analysis. In this paper, memristor is equivalent to a nonlinear dynamic system composed of linear dynamic system and nonlinear static system by Volterra series. The nonlinear transfer function of memristor is derived. In the complex frequency domain, the n-order complex frequency response of memristor is established by multiple Laplace transform, and the response of MLC parallel circuit is taken as an example to verify. Theoretical analysis shows that the complex frequency domain analysis method of memristor transforms the problem of solving nonlinear circuit in time domain into n times complex frequency domain analysis of linear circuit, which provides an idea for nonlinear dynamic system analysis.
Combinatorial testing is an effective testing technique for detecting faults in a software or hardware system with multiple factors using combinatorial methods. By performing a test, which is an assignment of possible values to all the factors, and verifying whether the system functions as expected (pass) or not (fail), the presence of faults can be detected. The failures of the tests are possibly caused by combinations of multiple factors assigned with specific values, called faulty interactions. Martínez et al. [1] proposed the first deterministic adaptive algorithm for discovering faulty interactions involving at most two factors where each factor has two values, for which graph representations are adopted. In this paper, we improve Martínez et al.'s algorithm by an adaptive algorithmic approach for discovering faulty interactions in the so-called “non-2-locatable” graphs. We show that, for any system where each “non-2-locatable factor-component” involves two faulty interactions (for example, a system having at most two faulty interactions), our improved algorithm efficiently discovers all the faulty interactions with an extremely low mistaken probability caused by the random selection process in Martínez et al.'s algorithm. The effectiveness of our improved algorithm are revealed by both theoretical discussions and experimental evaluations.
In this paper, we study the number of failed components in a consecutive-k-out-of-n:G system. The distributions and expected values of the number of failed components when system is failed or working at a particular time t are evaluated. We also apply them to the optimization problems concerned with the optimal number of components and the optimal replacement time. Finally, we present the illustrative examples for the expected number of failed components and give the numerical results for the optimization problems.
Yanjiang LIU Xianzhao XIA Jingxin ZHONG Pengfei GUO Chunsheng ZHU Zibin DAI
Side-channel analysis is one of the most investigated hardware Trojan detection approaches. However, nearly all the side-channel analysis approaches require golden chips for reference, which are hard to obtain actually. Besides, majority of existing Trojan detection algorithms focus on the data similarity and ignore the Trojan misclassification during the detection. In this paper, we propose a cost-sensitive golden chip-free hardware Trojan detection framework, which aims to minimize the probability of Trojan misclassification during the detection. The post-layout simulation data of voltage variations at different process corners is utilized as a golden reference. Further, a classification algorithm based on the combination of principal component analysis and Naïve bayes is exploited to identify the existence of hardware Trojan with a minimum misclassification risk. Experimental results on ASIC demonstrate that the proposed approach improves the detection accuracy ratio compared with the three detection algorithms and distinguishes the Trojan with only 0.27% area occupies even under ±15% process variations.
Yasuyuki MAEKAWA Yoshiaki SHIBAGAKI
Rain attenuation characteristics due to typhoon passage are discussed using the Ku-band BS satellite signal observations conducted by Osaka Electro-Communication University in Neayagawa from 1988 to 2019. The degree of hourly rain attenuation due to rainfall rate is largely enhanced as typhoon passes the east side of the station, while it becomes smaller in the case of west side passage. Compared to hourly ground wind velocities of nearby AMeDAS, the equivalent path lengths of rain attenuation become larger as the wind directions approach the same angle to the satellite, while they become smaller as the wind directions approach the opposite angle to the satellite. The increase and decrease of the equivalent path lengths are confirmed in other Ku-band and Ka-band satellite paths with different azimuth angles, such as CS, SKP, and SBC. Modified equivalent path lengths calculated by a simple propagation path model including horizontal wind speeds along the same direction to the satellite agree well with the equivalent path lengths observed by each satellite. The equivalent path lengths are, for the first time, proved to be largely affected by the direction of typhoon passage and the horizontal wind velocities.
Sho OBATA Koichi KOBAYASHI Yuh YAMASHITA
In the state estimation of steady-state power networks, a cyber attack that cannot be detected from the residual (i.e., the estimation error) is called a false data injection (FDI) attack. In this letter, to enforce the security of power networks, we propose a method of detecting an FDI attack. In the proposed method, an FDI attack is detected by randomly choosing sensors used in the state estimation. The effectiveness of the proposed method is presented by two examples including the IEEE 14-bus system.
Jerdvisanop CHAKAROTHAI Katsumi FUJII Yukihisa SUZUKI Jun SHIBAYAMA Kanako WAKE
In this study, we develop a numerical method for determining transient energy deposition in biological bodies exposed to electromagnetic (EM) pulses. We use a newly developed frequency-dependent finite-difference time-domain (FD2TD) method, which is combined with the fast inverse Laplace transform (FILT) and Prony method. The FILT and Prony method are utilized to transform the Cole-Cole model of biological media into a sum of multiple Debye relaxation terms. Parameters of Debye terms are then extracted by comparison with the time-domain impulse responses. The extracted parameters are used in an FDTD formulation, which is derived using the auxiliary differential equation method, and transient energy deposition into a biological medium is calculated by the equivalent circuit method. The validity of our proposed method is demonstrated by comparing numerical results and those derived from an analytical method. Finally, transient energy deposition into human heads of TARO and HANAKO models is then calculated using the proposed method and, physical insights into pulse exposures of the human heads are provided.
Sathya MADHUSUDHANAN Suresh JAGANATHAN
Incremental Learning, a machine learning methodology, trains the continuously arriving input data and extends the model's knowledge. When it comes to unlabeled data streams, incremental learning task becomes more challenging. Our newly proposed incremental learning methodology, Data Augmented Incremental Learning (DAIL), learns the ever-increasing real-time streams with reduced memory resources and time. Initially, the unlabeled batches of data streams are clustered using the proposed clustering algorithm, Clustering based on Autoencoder and Gaussian Model (CLAG). Later, DAIL creates an updated incremental model for the labelled clusters using data augmentation. DAIL avoids the retraining of old samples and retains only the most recently updated incremental model holding all old class information. The use of data augmentation in DAIL combines the similar clusters generated with different data batches. A series of experiments verified the significant performance of CLAG and DAIL, producing scalable and efficient incremental model.
Yuki KIMURA Sakuyoshi SAITO Yuichi KIMURA Masahiro TATEMATSU
This paper presents improvement of port-to-port isolation characteristics of a linearly dual-polarized dual-band and wideband multi-ring microstrip antenna (MR-MSA) fed by two L-probes. The linearly dual-polarized dual-band and wideband MR-MSA consists of two circular ring patches and two L-probes arranged in a multi-layered dielectric substrate. By using a thick substrate for the L-probe and arranging two ring patches as radiation elements, the proposed antenna operates wideband and dual-band characteristics. Furthermore, by arranging two L-probes at the orthogonal positions, the proposed antenna can radiate dual linear polarizations. In this paper, for improving port-to-port isolation characteristics of the linearly dual-polarized dual-band and wideband MR-MSA fed by two L-probes, a via connected to the ground plane at the center of the radiation elements is arranged. The fractional bandwidths below -10dB reflection obtained by the simulation of the MR-MSA with the via were 17.0% and 14.4%. Furthermore, the simulated isolation characteristics were more than 21.0dB and 17.0dB in the two bands. Improvement of the isolation characteristics between two ports as well as the dual-band and wideband performance of the proposed MR-MSA with the via were confirmed by the simulation and the measurement.
Hiroaki NAKABAYASHI Kiyoaki ITOI
Basic characteristics for relating design and base station layout design in land mobile communications are provided through a propagation model for path loss prediction. Owing to the rapid annual increase in traffic data, the number of base stations has increased accordingly. Therefore, propagation models for various scenarios and frequency bands are necessitated. To solve problems optimization and creation methods using the propagation model, a path loss prediction method that merges multiple models in machine learning is proposed herein. The method is discussed based on measurement values from Kitakyushu-shi. In machine learning, the selection of input parameters and suppression of overlearning are important for achieving highly accurate predictions. Therefore, the acquisition of conventional models based on the propagation environment and the use of input parameters of high importance are proposed. The prediction accuracy for Kitakyushu-shi using the proposed method indicates a root mean square error (RMSE) of 3.68dB. In addition, predictions are performed in Narashino-shi to confirm the effectiveness of the method in other urban scenarios. Results confirm the effectiveness of the proposed method for the urban scenario in Narashino-shi, and an RMSE of 4.39dB is obtained for the accuracy.
Shohei HAMADA Koichi ICHIGE Katsuhisa KASHIWAGI Nobuya ARAKAWA Ryo SAITO
This paper proposes two accurate source-number estimation methods for array antennas and multi-input multi-output radar. Direction of arrival (DOA) estimation is important in high-speed wireless communication and radar imaging. Most representative DOA estimation methods require the source-number information in advance and often fail to estimate DOAs in severe environments such as those having low signal-to-noise ratio or large transmission-power difference. Received signals are often bandlimited or narrowband signals, so the proposed methods first involves denoising preprocessing by removing undesired components then comparing the original and denoised signal information. The performances of the proposed methods were evaluated through computer simulations.
Takahiro KAWAGUCHI Naofumi TAKAGI
A 32-bit arithmetic logic unit (ALU) is designed for a rapid single flux quantum (RSFQ) bit-parallel processor. In the ALU, clocked gates are partially replaced by clockless gates. This reduces the number of D flip flops (DFFs) required for path balancing. The number of clocked gates, including DFFs, is reduced by approximately 40 %, and size of the clock distribution network is reduced. The number of pipeline stages becomes modest. The layout design of the ALU and simulation results show the effectiveness of using clockless gates in wide datapath circuits.
Fumihiro CHINA Naoki TAKEUCHI Hideo SUZUKI Yuki YAMANASHI Hirotaka TERAI Nobuyuki YOSHIKAWA
The adiabatic quantum flux parametron (AQFP) is an energy-efficient, high-speed superconducting logic device. To observe the tiny output currents from the AQFP in experiments, high-speed voltage drivers are indispensable. In the present study, we develop a compact voltage driver for AQFP logic based on a Josephson latching driver (JLD), which has been used as a high-speed driver for rapid single-flux-quantum (RSFQ) logic. In the JLD-based voltage driver, the signal currents of AQFP gates are converted into gap-voltage-level signals via an AQFP/RSFQ interface and a four-junction logic gate. Furthermore, this voltage driver includes only 15 Josephson junctions, which is much fewer than in the case for the previously designed driver based on dc superconducting quantum interference devices (60 junctions). In measurement, we successfully operate the JLD-based voltage driver up to 4 GHz. We also evaluate the bit error rate (BER) of the driver and find that the BER is 7.92×10-10 and 2.67×10-3 at 1GHz and 4GHz, respectively.
Weina ZHOU Ying ZHOU Xiaoyang ZENG
Salient ship detection plays an important role in ensuring the safety of maritime transportation and navigation. However, due to the influence of waves, special weather, and illumination on the sea, existing saliency methods are still unable to achieve effective ship detection in a complex marine environment. To solve the problem, this paper proposed a novel saliency method based on an attention nested U-Structure (AU2Net). First, to make up for the shortcomings of the U-shaped structure, the pyramid pooling module (PPM) and global guidance paths (GGPs) are designed to guide the restoration of feature information. Then, the attention modules are added to the nested U-shaped structure to further refine the target characteristics. Ultimately, multi-level features and global context features are integrated through the feature aggregation module (FAM) to improve the ability to locate targets. Experiment results demonstrate that the proposed method could have at most 36.75% improvement in F-measure (Favg) compared to the other state-of-the-art methods.
Taiki YAMAE Naoki TAKEUCHI Nobuyuki YOSHIKAWA
The adiabatic quantum-flux-parametron (AQFP) is an energy-efficient superconductor logic device. In a previous study, we proposed a low-latency clocking scheme called delay-line clocking, and several low-latency AQFP logic gates have been demonstrated. In delay-line clocking, the latency between adjacent excitation phases is determined by the propagation delay of excitation currents, and thus the rising time of excitation currents should be sufficiently small; otherwise, an AQFP gate can switch before the previous gate is fully excited. This means that delay-line clocking needs high clock frequencies, because typical excitation currents are sinusoidal and the rising time depends on the frequency. However, AQFP circuits need to be tested in a wide frequency range experimentally. Hence, in the present study, we investigate AQFP circuits adopting delay-line clocking with square excitation currents to apply delay-line clocking in a low frequency range. Square excitation currents have shorter rising time than sinusoidal excitation currents and thus enable low frequency operation. We demonstrate an AQFP buffer chain with delay-line clocking using square excitation currents, in which the latency is approximately 20ps per gate, and confirm that the operating margin for the buffer chain is kept sufficiently wide at clock frequencies below 1GHz, whereas in the sinusoidal case the operating margin shrinks below 500MHz. These results indicate that AQFP circuits adopting delay-line clocking can operate in a low frequency range by using square excitation currents.
Kenta SATO Naonori SEGA Yuta SOMEI Hiroshi SHIMADA Takeshi ONOMI Yoshinao MIZUGAKI
We experimentally evaluated random number sequences generated by a superconducting hardware random number generator composed of a Josephson-junction oscillator, a rapid-single-flux-quantum (RSFQ) toggle flip-flop (TFF), and an RSFQ AND gate. Test circuits were fabricated using a 10 kA/cm2 Nb/AlOx/Nb integration process. Measurements were conducted in a liquid helium bath. The random numbers were generated for a trigger frequency of 500 kHz under the oscillating Josephson-junction at 29 GHz. 26 random number sequences of 20 kb length were evaluated for bias voltages between 2.0 and 2.7 mV. The NIST FIPS PUBS 140-2 tests were used for the evaluation. 100% pass rates were confirmed at the bias voltages of 2.5 and 2.6 mV. We found that the Monobit test limited the pass rates. As numerical simulations suggested, a detailed evaluation for the probability of obtaining “1” demonstrated the monotonical dependence on the bias voltage.