A double layer stacked patch antenna with a size of 200×200×48mm³ is proposed in this investigation. To achieve a broad CP bandwidth that can cover universal UHF RFID applications (840-960MHz), a slot loaded circular patch antenna fed by an L-shaped probe is designed as the lower layer (main patch), while the top layer (parasitic patch) is a simple circular patch loaded with a cross-slot of dissimilar arm lengths. Besides demonstrating a broad 10-dB return loss bandwidth of 16% (823-966MHz) and a CP bandwidth (3-dB axial ratio) of 14.0% (837-963MHz), the proposed antenna also yields maximum gain and minimum radiation efficiency of 8.8dBic and 85%, respectively, across the universal UHF RFID bands.

Recently, wearable wireless devices or terminals have become hot a topic not only in research but also in business. Implantable wireless devices can temporarily be utilized to monitor a patient's condition in an emergency situation or to identify people in highly secured places. Unlike conventional wireless devices, wearable or implantable devices are used on or in the human body. In this sense, body-centric wireless communications (BCWCs) have become a very active area of research. Radio-frequency or microwave medical devices used for cancer treatment systems and surgical operation have completely different functions, but they are used on or in the human body. In terms of research techniques, such medical devices have a lot of similarities to BCWCs. The antennas to be used in the vicinity of the human body should be safe, small and robust. Also, their interaction with the human body should be well considered. This review paper describes some of the wearable antennas as well as implantable antennas that have been studied in our laboratory.

This paper presents a pattern reconfigurable Yagi-Uda antenna on an FR-4 printed circuit board (PCB) for 2.435-2.465GHz-frequency short-range radiocommunication devices. To realize the antenna, pin diodes are attached onto the antenna's driven elements and parasitic elements. The direction of the beam is shifted by alternating the pin diodes status between ON and OFF to induce a quad-directional operation so that E-plane maximum beams are formed in the directions of 135°, 45°, 310° and 225° (i.e. regions 1, 2, 3, 4), respectively. A series of simulations are performed on four parameters: microstrip-to-CPS (coplanar stripline), inter-parasitic spacing, parasitic length, and modes of parasitic elements (i.e. director/reflector) to determine the optimal antenna design. A prototype is fabricated based on the optimal simulation results. The experiments showed very good agreement between the simulation and measured results with regard to the reflection coefficients, radiation patterns and gains for all four beams.

For the realization of a high-efficiency antenna for 60GHz-band wireless personal area network, we propose placing a CMOS RF circuit and an antenna on opposing sides of a silicon chip. They are connected with low loss by a coaxial-line structure using a hole opening in the chip. Since the CMOS circuit is driven differentially, a differential-feed antenna is used. In this paper, we design and measure a differential-feed square patch antenna on a silicon chip. To enhance the radiation efficiency, it is placed on a 200µm thick resin layer. The calculated radiation efficiency of 79% includes the connection loss. A prototype antenna is measured in a reverberation chamber, and its radiation efficiency is estimated to be about 81±3%.

A broadband mode transition between grounded coplanar waveguide (GCPW) and post-wall waveguide (PWW) is proposed. The transition is composed of GCPW, microstrip line (MSL) and PWW, where the GCPW and PWW are connected via the MSL. The transition is fabricated on liquid crystal polymer (LCP) substrate because of its low dielectric loss and cost effectiveness based on a roll-to-roll fabrication process. Center strip of the GCPW is sandwiched by two ground pads in each of which two through-holes and a rectangular slit are structured. Broadband impedance matching is achieved by this structure thanks to an addition of lumped inductance and capacitance to the transition. A part of the MSL is tapered for the broadband operation. A 25% impedance bandwidth for |S₁₁| less than -15dB is achieved in measurement of a fabricated transition. Loss of the GCPW ground-signal-ground (GSG) pad of 0.12dB and that of the MSL-PWW transition of 0.29dB at 60GHz are evaluated from the measurement. Fabrication error and the caused tolerance on performance are also evaluated and small variation in production is confirmed. The mode transition can be used for low loss antenna-in-package in millimeter-wave applications.

A 12×16-element corporate-feed slot array is presented. The corporate-feed circuit for the 12×16-elemtent array consists of cross-junctions and asymmetric T-junctions, whereas the conventional one is limited to arrays of 2^m×2ⁿ slots by its use of symmetric T-junctions. Simulations of the 12×16-element array show a 7.6% bandwidth for reflection less than -14dB. A 31.7-dBi gain with an antenna efficiency of 82.6% is obtained at the design frequency of 61.5GHz. The 12×16-element array is fabricated by diffusion bonding of laminated thin metal plates. Measurements indicate 31.1-dBi gain with 71.9% antenna efficiency at 61.5GHz.

Multiple-input multiple-output (MIMO) technology is a useful means of achieving the higher data rates needed in the latest wireless devices. However, weighting calculations for MIMO transmission become complicated when there are a large number of antennas. Thus, developing a simpler way to transmit and receive multiple streams is an idea worth considering. With this in mind, we propose a spatial division method using orthogonal directivities formed by using higher order modes of rectangular microstrip antennas. Each of them is formed by one antenna element so that channels are orthogonalized only by antennas. We verify antenna radiation characteristics by using higher order mode microstrip antennas and confirm that orthogonal directivities are obtained with them. Measurement of two stream transmission reveals that the method achieves almost the same channel capacity as that of an eigenmode-beamforming method because of the high multiplexing gain it achieves.

In this paper, we present a weighted-polarization wearable multiple-input multiple-output (MIMO) antenna that is based on radio-frequency (RF) signal processing to realize ultra-high-speed and high-capacity mobile communications. The proposed antenna is comprised of three orthogonal dipoles, two of which can be selected according to a weight function in different usage scenarios. The weight function is determined by considering the variation in the cross-polarization power ratio (XPR) and the antenna inclination angle which depend on the radio-propagation environment and human motion. To confirm the suitability of the proposed antenna, we perform preliminary experiments to evaluate the channel capacity of a weighted-polarization wearable MIMO antenna with an arm-swinging dynamic phantom. The measured and analytical results are in good agreement, which verifies the effectiveness of the proposed antenna. We demonstrate that the proposed antenna is suitable for realizing gigabit mobile communications in future wearable MIMO applications.

An analog-beamforming-based eigenmode transmission technique is proposed that employs a network of interconnected 180-degree hybrid couplers at both transmitting and receiving sides of a plane-symmetrically configured short-range MIMO system. This technique can orthogonalize MIMO channels regardless of array parameters such as antenna spacing and Tx-Rx distance, provided the MIMO array is symmetric. For verifying the effectiveness of the proposed technique in channel orthogonalization, an experiment is conducted using a 4×4 MIMO array consisting of microstrip antennas and cascade-connected rat-race hybrid couplers. The results indicate a reduction in interference by approximately -28.3dB on average compared to desired signal power, and the ability to realize four-stream parallel MIMO transmission by using only analog passive networks. The proposed technique can achieve channel capacity almost equivalent to that of eigenbeam space division multiplexing with ideal digital beamforming.

To design a wireless sensor network for farms, it is necessary to understand and predict the effect of vegetation. In this study, the change in the propagation loss characteristics in 920-MHz band is examined during the growth of mulberry bushes. The received signal strength indicator (RSSI) is measured as a function of the distance between the transmitting antenna (Tx) and the receiving antenna (Rx) in a 50×50m mulberry field. The Tx and Rx are placed at a height of 1.5m. Moreover, the horizontal and vertical polarizations are measured and the differences are shown. Three empirical vegetation attenuation models are introduced, and the measured data have been fitted to each model. The results show that the non-zero gradient model is the best model at predicting the vegetation attenuation in a mulberry farm regardless of the polarization or mulberry growth. It is found that the attenuation dependence on the plant height is linear. Furthermore, the results have revealed that the horizontal polarization had about 1.5 times as large an effect on the vegetation attenuation as the vertical polarization.

This paper shows accuracy of using azimuth-variable path-loss fitting in white-space (WS) boundary-estimation. We perform experiments to evaluate this method, and demonstrate that the required number of sensors can be significantly reduced. We have proposed a WS boundary-estimation framework that utilizes sensors to not only obtain spectrum sensing data, but also to estimate the boundaries of the incumbent radio system (IRS) coverage. The framework utilizes the transmitter position information and pathloss fitting. The pathloss fitting describes the IRS coverage by approximating the well-known pathloss prediction formula from the received signal power data, which is measured using sensors, and sensor-transmitter separation distances. To enhance its accuracy, we have further proposed a pathloss-fitting method that employs azimuth variables to reflect the azimuth dependency of the IRS coverage, including the antenna directivity of the transmitter and propagation characteristics.

In this paper, a method of calculating the mean channel capacity based on S-parameter of MIMO (Multiple-Input Multiple-Output) antenna is proposed. This method exploits the correlation matrix calculated from the antenna S-parameter matrix, and offers highly accurate estimates of the mean channel capacity without dependence on SNR (Signal-to-Noise Ratio). The numerical and experimental results revealed that the proposed method can calculate the channel capacity with fair accuracy independent of the number and spacing of the antenna elements if the radiation efficiency is sufficiently high.

Ultra-wideband (UWB) beamforming is now attracting significant research attention for attaining spatial gain from array antennas. It is commonly believed that directional antenna based communication could improve the system performance. In order to further make clear the relationship between system performance and the antenna array beamforming, UWB indoor channels are extracted from practical measurements and circular horn antenna is used to characterize the channel properties and to evaluate the system performance. Using a single beam directional antenna with a certain half power beamwidth (HPBW), the channel capacity and the bit-error-rate (BER) performance of a UWB RAKE receiver are evaluated. In the line-of-sight (LOS) environments, the channel capacity and BER performance are improved with the beamwidth becoming smaller. However in the non-line-of-sight (NLOS) environments, the capacity and BER performance are not always better with directional antennas. And the variation trend between the system performance and the antenna beamwidth disappears. This is mainly because that there exist no dominant strong path components like those seen in LOS environments. Then beam combining is introduced to further improve the system performance. Simulation results show that the channel capacity and BER performance cloud be greatly improved by multiple beam combining, especially for the NLOS environments. This reminds us that when antenna beamforming is used to obtain array gain, the beamwidth should be carefully designed and beam combining is necessary to obtain optimal performance, especially in NLOS environments.

This paper proposes Fast Fourier Transform (FFT) based orthogonal beam selection method at the user terminals (UTs) to reduce the number of nulls for the other users except an intended user by the Block Diagonalization (BD) algorithm in multiuser MIMO (MU-MIMO) sytems. The BD algorithm has been proposed in order to realize MU-MIMO broadcast transmission with a realistic signal processing burden. The BD algorithm cancels inter-user interference by creating the weights so that the channel matrixes for the other users are set to be zero matrixes. However, when the number of transmit antennas is equals to the total number of received antennas, the transmission rate by the BD algorithm is decreased. The proposed method realizes the performance improvement compared to the conventional BD algorithm without the burden on the UTs. It is verified via bit error rate (BER) evaluation that the proposed method is effective compared to the conventional BD algorithm and antenna selection method. Moreover, the effectiveness of proposed method is verified by the performance evaluation considering medium access control (MAC) layer in a comparison with the conventional BD algorithm which needs the channel state information (CSI) feedback. Because the proposed method can be easily applied to beamforming without the CSI feedback (implicit beamforming), it is shown that the propose method is effective from a point of view on the transmission efficiency in MU-MIMO system.

The MIMO technique can improve system performance of not only communication system but also of radar systems. In this paper, we apply the MIMO radar with enhanced angular resolution to the indoor location estimation of humans. The Khatri-Rao (KR) matrix product is also adopted for further angular resolution enhancement. We show that the MIMO radar with the KR matrix product processing can increase the number of virtual elements effectively with suitable element arrangement, hence higher angular resolution can be realized. In general, the KR matrix product processing is not suitable for coherent radar because of signal correlation. However, when targets signals have enough Doppler frequency differential against each other, this approach works well because the signals are decorrelated. In addition, Doppler filtering is introduced to remove unwanted responses of stationary objects which make human detection difficult with conventional methods. Computer simulation and experimental results are provided to show performance of the proposed method.

Microwave systems have a number of promising applications in surveillance and monitoring systems. The main advantage of microwave systems is their ability to detect targets at distance under adverse conditions such as dim, smoky, and humid environments. Specifically, the wide bandwidth of ultra-wideband radar enables high range resolution. In a previous study, we proposed an accurate shape estimation algorithm for multiple targets using multiple ultra-wideband Doppler interferometers. However, this algorithm produces false image artifacts under conditions with severe interference. The present paper proposes a technique to suppress such false images by detecting inconsistent combinations of the radial velocity and time derivative of image positions. We study the performance of the proposed method through numerical simulations of a two-dimensional section of a moving human body, and demonstrate the remarkable performance of the proposed method in suppressing false image artifacts in many scenarios.

This paper describes a fast and effective algorithm for refining the parameter estimates of multicomponent third-order polynomial phase signals (PPSs). The efficiency of the proposed algorithm is accompanied by lower signal-to-noise ratio (SNR) threshold, and computational complexity. A two-step procedure is used to estimate the parameters of multicomponent third-order PPSs. In the first step, an initial estimate for the phase parameters can be obtained by using fast Fourier transformation (FFT), k-means algorithm and three time positions. In the second step, these initial estimates are refined by a simple moving average filter and singular value decomposition (SVD). The SNR threshold of the proposed algorithm is lower than those of the non-linear least square (NLS) method and the estimation refinement method even though it uses a simple moving average filter. In addition, the proposed method is characterized by significantly lower complexity than computationally intensive NLS methods. Simulations confirm the effectiveness of the proposed method.

In this paper, we derive two simple asymptotic closed-form formulas for the average bit error probability (BEP) of differential quaternary phase shift keying (DQPSK) with Gray encoding and a simple asymptotic approximation for the average symbol error probability (SEP) of doubly-differential quaternary phase shift keying (DDQPSK) in Nakagami-m fading channels. Compared with the existing BEP/SEP expressions, the derived concise formulas are much more effective in evaluating the asymptotic properties of DQPSK/DDQPSK with various Nakagami fading parameters, the accuracy of which is verified by extensive numerical results.

In recent years, much work has been devoted to developing protocols and architectures for supporting the growing trend of data-oriented services. One drawback of many of these proposals is the need to upgrade or replace all the routers in order for the new systems to work. Among the few systems that allow for gradual deployment is the recently-proposed Breadcrumbs technique for distributed coordination among caches in a cache network. Breadcrumbs uses information collected locally at each cache during past downloads to support in-network guiding of current requests to desired content. Specifically, during content download a series of short-term pointers, called breadcrumbs, is set up along the download path. Future requests for this content are initially routed towards the server which holds (a copy of) this content. However, if this route leads the request to a Breadcrumbs-supporting router, this router re-directs the request in the direction of the latest downloaded, using the aforementioned pointers. Thus, content requests are initially forwarded by a location ID (e.g., IP address), but encountering a breadcrumb entry can cause a shift over to content-based routing. This property enables the Breadcrumbs system to be deployed gradually, since it only enhances the existing location-based routing mechanism (i.e. IP-based routing). In this paper we evaluate the performance of a network where Breadcrumbs is only partially deployed. Our simulation results show Breadcrumbs performs poorly when sparsely deployed. However, if an overlay of Breadcrumbs-supporting routers is set-up, system performance is greatly improved. We believe that the reduced load on servers achieved with even a limited deployment of Breadcrumbs-supporting routers, combined with the flexibility of being able to deploy the system gradually, should motivate further investigation and eventual deployment of Breadcrumbs. In the paper, we also evaluate more coarse level than router level, i.e. ISP-level Breadcrumbs deployment issues. Our evaluation results show that Higher-layer first deployment approach obtains great improvement caused by Breadcrumbs redirections because of traffic aggregation in higher layer ISP.

This paper presents a new methodology of the over-the-air (OTA) assessment for vertically arranged multiple-input multiple-output (MIMO) array antennas. Particular emphasis is placed on how well handset MIMO antennas with a vertically arranged structure are characterized using the limited number of scatterers implemented in a fading emulator. First we studied the mechanism of the arrangement of scatterers on the variation of channel responses using a proposed three-dimensional analytical model. It is shown that the condition of a 3D-OTA with the prescribed parameters allows the correlation to be reduced, which permits the channel capacity to increase in the same manner that sufficient scatterers are distributed over the entire solid angle. Then the appropriate scatterers arrangement for a 3D-OTA instrument considering the number of DUT antenna elements and multipath characteristics is investigated. The analytical results show that a suitable scatterers arrangement can be determined for various conditions of multipath environments and numbers of array elements, and that the arrangement can be employed for designing an actual 3D-OTA apparatus.

A tri-band Multiple-input-multiple-output (MIMO) antenna system for LTE 700, LTE2500 and GSM 1800/1900 mobile handset application is presented. The whole system consists of four identical 3-D IFAs (inverted F antenna) folded on FR4 cuboids. Without any special designed decoupling structures, the measured isolation among antenna elements is higher than 20dB in the low and upper bands, even in the middle band, the isolation is higher than 13.7dB. Reflection coefficient, correlation coefficient, gain and radiation pattern are also presented. Acceptable agreement between the antenna models with and without plastic housing, battery and LCD screen demonstrate that the proposed antenna is a competitive candidate for mobile handsets.

To investigate electrostatic discharge (ESD) immunity testing for wearable electronic devices, the worst scenario i.e., an ESD event occurs when the body-mounted device approaches a grounded conductor is focused in this paper. Discharge currents caused by air discharges from a charged human through a hand-held metal bar or through a semi-sphere metal attached to the head, arm or waist in lieu of actual wearable devices are measured. As a result, it is found that at a human charge voltage of 1kV, the peak current from the semi-sphere metal is large in order of the attachment of the waist (15.4A), arm (12.8A) and head (12.2A), whereas the peak current (10.0A) from the hand-held metal bar is the smallest. It is also found that the discharge currents through the semi-sphere metals decrease to zero at around 50ns regardless of the attachment positions, although the current through the hand-held metal bar continues to flow at over 90ns. These discharge currents are further characterized by the discharge resistance, the charge storage capacitance and the discharge time constant newly derived from the waveform energy, which are validated from the body impedance measured through the hand-held and body-mounted metals. The above finding suggests that ESD immunity test methods for wearable devices require test specifications entirely different from the conventional ESD immunity testing.

In this paper, we propose a new joint transmit and receive spatial/frequency-domain filtering for single-carrier (SC) multiple-input multiple-output (MIMO) eigenmode transmission using iterative interference cancellation (IC). Iterative IC is introduced to a previously proposed joint transmit and receive spatial/frequency-domain filtering based on minimum mean square error criterion (called joint Tx/Rx MMSE filtering) to reduce the residual inter-symbol interference (ISI) after the Rx filtering. The optimal Tx/Rx filters are derived based on the MMSE criterion taking into account the iterative IC. The superiority of our proposed technique is confirmed by computer simulation.

This paper proposes an open-loop correlation reduction precoding scheme for overloaded multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems. In overloaded MIMO-OFDM systems, frequency diversity through joint maximum likelihood (ML) decoding suppresses performance degradation owing to spatial signal multiplexing. However, on a line-of-sight (LOS) channel, a channel matrix may have a large correlation between coded symbols transmitted on separate subcarriers. The correlation reduces the frequency diversity gain and deteriorates the signal separation capability. Thus, in the proposed scheme, open-loop precoding is employed at the transmitter of an overloaded MIMO system in order to reduce the correlation between codewords transmitted on different signal streams. The proposed precoding scheme changes the amplitude as well as the phase of the coded symbols transmitted on different subcarriers. Numerical results obtained through computer simulation show that the proposed scheme improves the bit error rate performance on Rician channels. It is also shown that the proposed scheme greatly suppresses the performance degradation on an independent Rayleigh fading channel even though the amplitude of the coded symbols varies.

In this paper, we present a modified image rejection method that uses imbalance compensation techniques for phase and gain in low-intermediate frequency (IF) software-defined radio (SDR) receivers. In low-IF receivers, the image frequency signal interferes with the desired signal owing to the phase and gain imbalances caused by analog devices. Thus, it is difficult to achieve the required image rejection ratio (IRR) of over 60dB without compensation. To solve this problem, we present modified blind compensation techniques based on digital signal processing using a feedback control loop with a practical computation process. The modified method can reduce the complexity when a hardware logic circuit is used, like an FPGA. The simulation and experimental results verify that the modified method achieves an IRR greater than 50-60dB for both the carrier and the modulated waves.

We herein describe an autonomous peer discovery scheme for Device-to-Device (D2D) communications. With the increasing popularity of D2D communications, an efficient means of finding the neighboring node, i.e., peer discovery, is required. To this end, we propose a new autonomous peer discovery scheme that uses azimuth spread (AS), delay spread (DS), and shadow fading of the uplink pilot from each mobile station (MS). Given that AS, DS, and shadow fading are spatially correlated, nodes that have similar values must be neighbors. The proposed scheme filters out the MSs that are unlikely to be neighbors and uses the Kolmogorov-Smirnov (K-S) test to improve the accuracy of neighbor discovery. Unlike previous peer discovery schemes that incur additional signaling overheads, our proposal finds neighboring nodes by using the existing uplink pilot transmission from MSs such that neighboring peers can be found autonomously. Through analysis and simulation, we show that neighboring MSs can be found accurately with low latency.

The ordered successive interference cancellation (OSIC) detector based on the minimum mean square error (MMSE) criterion has been proved to be a low-complexity detector with efficient bit error rate (BER) performance. As the well-known MMSE-Based OSIC detector, the MMSE-Based vertical Bell Laboratories Layered Space-Time (VBLAST) detector, whose computational complexity is cubic, can not attain the minimum BER performance. Some approaches to reducing the BER of the MMSE-Based VBLAST detector have been contributed, however these improvements have large computational complexity. In this paper, a low complexity MMSE-Based OSIC detector called MMSE-OBEP (ordering based on error probability) is proposed to improve the BER performance of the previous MMSE-Based OSIC detectors, and it has cubic complexity. The proposed detector derives the near-exact error probability of the symbols in the MMSE-Based OSIC detector, thus giving priority to detect the symbol with the smallest error probability can minimize the error propagation in the MMSE-Based OSIC detector and enhance the BER performance. We show that, although the computational complexity of the proposed detector is cubic, it can provide better BER performance than the previous MMSE-Based OSIC detector.

In the dynamic heterogeneous cellular network, spectrum allocation deeply impacts the quality of service and performance of network. In this paper, spectrum allocation is formulated as a dynamic programming problem. A two-level framework is proposed by jointly considering users' dynamic service selection and provider's spectrum allocation. In the first level, the users' service selection is modeled as an evolutionary game, and an evolutionary equilibrium is obtained. In the second level, the service provider allocates the spectral resources to macrocells and femtocells according to the users' strategies, so as to maximize its profits. By jointly considering the service selection and spectrum allocation, the equilibriums of the dynamic network are found. The stability of the equilibriums is analyzed and proven. The proposed two-level framework is validated by the numerical simulation.

This paper proposes an application of splitting source-node power for a two-phase cooperative relaying system where the transmit powers of the source and the relay node are individually constrained. In the proposed usage, the limited source power is divided into two parts that are used in the first and the second phase. Unlike conventional relaying methods, in the second phase the source retransmits its signal with the split power and, at the same time, the relay forwards the signal received at the first phase, which causes interference between the signals. In order to avoid the intervention, so-called a co-phasing weight for aligning the phases of the two signals is used at at the source before the second transmission. The forwarding operation at the relay however is exactly the same as the conventional techniques. Optimal power-splitting as well as the co-phasing weight is provided in this paper. With numerical investigation, the proposed power-splitting is shown to significantly improve the achievable throughput as well as reduce the outage probability compared with the conventional individual power allocation.

Broadcasting is the process of sending a message from one node to all the other nodes in a network. Simple flooding is the simplest form of broadcasting in ad hoc wireless networks. Simple flooding provides important control, route discovery, and network information update functionality for unicast and multicast protocols. However, simple flooding generates too many broadcast message duplications in ad hoc wireless networks. Minimum spanning tree (MST)-based flooding has traditionally been used in networks to reduce the broadcast duplications by determining broadcast trees using global topology information. However, MST-based flooding still generates a lot of broadcast traffic duplications. In this paper, we propose an efficient type of flooding, called “minimizing re-transmissions” (MRT), to significantly reduce the broadcast duplications. The purpose of MRT is to minimize the number of retransmitting nodes in an ad hoc wireless network based on the network's link state information. This advantage of minimizing the number of retransmitting nodes significantly reduces broadcast message duplications in ad hoc wireless networks. The performance of MRT is analyzed, evaluated, and compared to that of the simple flooding and the MST-based flooding. Simulations are conducted using the OMNet++ Simulator in order to validate the traffic performance analysis. For our sample network, analytical and simulation results show that MRT reduces broadcast message duplications by about 80% compared to simple flooding and by about 68% compared to MST-based flooding, thus saving a significant amount of network bandwidth and energy. MRT can be used in static or mobile ad hoc wireless networks and in wired networks to implement scalable broadcast communications.

WLAN infrastructure has been deployed densely and extensively in the past few years. Since APs are always kept online, a dense WLAN will waste energy during idle hours. In this paper, we first state some principles for powering on/off APs in order to save energy. Then we design an energy saving mechanism correspondingly. The energy saving mechanism includes three processes: clustering APs, estimating user location, and powering on/off APs, which tries to choose appropriate APs being online according to user location information. Results of trace-driven simulation show that our mechanism could achieve about 42% energy conservation. More importantly, our mechanism can provide better network service for users than previous mechanisms which usually ignore user location information.

With extensive use of automotive radars, mutual interference between radars has become a crucial issue, since it increases the noise floor in the frequency domain triggering frequent false alarms and unsafe decision. This paper introduces a mathematical model for a frequency-modulated continuous-wave (FMCW) radar in interfering environments. In addition, this paper proposes a time-domain interference suppression method to provide anti-interference capability regardless of the signal-to-interference ratio. Numerical results are presented to verify the performance of a 77GHz FMCW radar systme with the proposed method in interference-rich environments.

The key factors in overcoming for weak global navigation satellite systems (GNSS) signal acquisition are sensitivity and dwell time. In the conventional MAX/TC criteria, a preset threshold value is used to determine whether the signal exists. Thus the threshold is calculated carefully to balance the sensitivity and the dwell time. Affected by various environment noise and interference, the acquisition circuit will enter verifying mode frequently to eliminate false alarms, which will extend the mean acquisition time (MAT). Based on the periodicity of spread spectrum code in GNSS, this paper presents an improved double-dwell scheme that uses no threshold in detecting weak GNSS signals. By adopting this method, the acquisition performance of weak signal is significantly improved. Theoretical analysis and numerical simulation are presented detailed. Compared with the conventional MAX/TC criteria, the proposed method achieves improved performance in terms of detection probability and false alarm rate. Furthermore, the MAT decreases 15s when C/N₀ is above 20dB-Hz. This can enhance the receiver sensitivity and shorten the time to first fix (TTFF).