We have proposed integrated waveguide structure suitable for mid- and near- infrared light propagation using Si and CaF2 heterostructures on Si substrate. Using a fabrication process based on etching, lithography and crystal growth techniques, we have formed a slab-waveguide structure with a current injection mechanism on a SOI substrate, which would be a key component for Si/CaF2 quantum cascade lasers and other optical integrated systems. The propagation of light at a wavelength of 1.55 µm through a Si/CaF2 waveguide structure have been demonstrated for the first time using a structure with a Si/CaF2 multilayered core with 610-nm-thick, waveguide width of 970 nm, which satisfies single-mode condition in the horizontal direction within a tolerance of fabrication accuracy. The waveguide loss for transverse magnetic (TM) mode has been evaluated to be 51.4 cm-1. The cause of the loss was discussed by estimating the edge roughness scattering and free carrier absorption, which suggests further reduction of the loss would be possible.

Constructing accurate similarity graph is an important process in graph-based clustering. However, traditional methods have three drawbacks, such as the inaccuracy of the similarity graph, the vulnerability to noise and outliers, and the need for additional discretization process. In order to eliminate these limitations, an entropy regularized unsupervised clustering based on maximum correntropy criterion and adaptive neighbors (ERMCC) is proposed. 1) Combining information entropy and adaptive neighbors to solve the trivial similarity distributions. And we introduce l0-norm and spectral embedding to construct similarity graph with sparsity and strong segmentation ability. 2) Reducing the negative impact of non-Gaussian noise by reconstructing the error using correntropy. 3) The prediction label vector is directly obtained by calculating the sparse strongly connected components of the similarity graph Z, which avoids additional discretization process. Experiments are conducted on six typical datasets and the results showed the effectiveness of the method.

Multi-hop V2V communication is a fundamental way to realize data transmission in Vehicular Ad-hoc Networks (VANET). It has excellent potential in intelligent transportation systems and automatic vehicle driving, and positively affects the safety, reliability, and comfort of vehicles. With advantages in speed and trajectory, distribution along the route, size, etc., the urban buses have become prospective relay nodes for urban VANETs. However, it is a considerable challenge to construct stable and reliable (meeting the requirements of bandwidth, delay, and bit error rate) multi-hop routing because of the complexity of the urban road and bus line network in the communication area, as well as many unevenly distributed buses on the road, etc. Given this above, this paper proposes a new hierarchical routing algorithm based on V2V geographic topology segmentation. Urban hierarchical routing is divided into two layers. The first layer of routing is called coarse routing, which is composed of areas; the second layer of routing is called internal routing (bus routing within the area). Q-learning is used to formulate the sequence of buses that transmit information within each area. Details are as follows: Firstly, based on a city map containing road network information, the entire city is divided into small grids by physical streets. Secondly, based on an analysis of the characteristics of the adjacent grid bus lines, the grids with the same routing attributes are integrated into the same area, reducing the algorithm's computational complexity during route discovery. Then, for the calculated area set, a coarse route composed of the selected area is established by filtering out a group of areas satisfying from the source node to the destination node. Finally, the bus sequence between anchor intersections is selected within the chosen area, and a complete multi-hop route from the source node to the destination node is finally constructed. Sufficient simulations show that the proposed routing algorithm has more stable performance in terms of packet transmission rate, average end-to-end delay, routing duration, and other indicators than similar algorithms.

Supersingular isogeny Diffie-Hellman (SIDH) is attractive for its relatively small public key size, but it is still unsatisfactory due to its efficiency, compared to other post-quantum proposals. In this paper, we focus on the performance of SIDH when the starting curve is E6 : y2 = x3 + 6x2 + x, which is fixed in Round-3 SIKE implementation. Inspired by previous works [1], [2], we present several tricks to accelerate key generation of SIDH and each process of SIKE. Our experimental results show that the performance of this work is at least 6.09% faster than that of the SIKE implementation, and we can further improve the performance when large storage is available.

Testing the radio frequency compatibility between Cn-band Satellite Navigation and Microwave Landing System (MLS) has included establishing a specific interference model and reporting the effect of such interference. This paper considers two interference scenarios according to the interfered system. By calculating the Power Flux Density (PFD) values, the interference for Cn-band satellite navigation downlink signal from several visible space stations on MLS service is evaluated. Simulation analysis of the interference for MLS DPSK-data word signal and scanning signal on Cn-band satellite navigation signal is based on the Spectral Separation Coefficient (SSC) and equivalent Carrier-to-Noise Ratio methodologies. Ground tests at a particular military airfield equipped with MLS ground stations were successfully carried out, and some measured data verified the theoretical and numerical results. This study will certainly benefit the design of Cn-band satellite navigation signals and guide the interoperability and compatibility research of Cn-band satellite navigation and MLS.

End-to-end loss and delay are both fundamental metrics in network performance evaluation, and accurate measurements for these end-to-end metrics are one of the keys to keeping delay/loss-sensitive applications (e.g., audio/video conferencing, IP telephony, or telesurgery) comfortable on networks. In our previous work [1], we proposed a parallel flow monitoring method that can provide accurate active measurements of end-to-end delay. In this method, delay samples of a target flow increase by utilizing the observation results of other flows sharing the source/destination with the target flow. In this paper, to improve accuracy of loss measurements, we propose a loss measurement method by extending our delay measurement method. Additionally, we improve the loss measurement method so that it enables to fully utilize information of all flows including flows with different source and destination. We evaluate the proposed method through theoretical and simulation analyses. The evaluations show that the accuracy of the proposed method is bounded by theoretical upper/lower bounds, and it is confirmed that it reduces the error of loss rate estimations by 57.5% on average.

Convolutional neural network (CNN) based vehicle re-identificatioin (ReID) inevitably has many disadvantages, such as information loss caused by downsampling operation. Therefore we propose a vision transformer (Vit) based vehicle ReID method to solve this problem. To improve the feature representation of vision transformer and make full use of additional vehicle information, the following methods are presented. (I) We propose a Quadratic Split Architecture (QSA) to learn both global and local features. More precisely, we split an image into many patches as “global part” and further split them into smaller sub-patches as “local part”. Features of both global and local part will be aggregated to enhance the representation ability. (II) The Auxiliary Information Embedding (AIE) is proposed to improve the robustness of the model by plugging a learnable camera/viewpoint embedding into Vit. Experimental results on several benchmarks indicate that our method is superior to many advanced vehicle ReID methods.

For formulating Quadratic Knapsack Problems (QKPs) into the form of Quadratic Unconstrained Binary Optimization (QUBO), it is necessary to introduce an integer variable, which converts and incorporates the knapsack capacity constraint into the overall energy function. In QUBO, this integer variable is encoded with auxiliary binary variables, and the encoding method used for it affects the behavior of Simulated Annealing (SA) significantly. For improving the efficiency of SA for QKP instances, this paper first visualized and analyzed their annealing processes encoded by conventional binary and unary encoding methods. Based on this analysis, we proposed a novel hybrid encoding (HE), getting the best of both worlds. The proposed HE obtained feasible solutions in the evaluation, outperforming the others in small- and medium-scale models.

Edge computing, which has been gaining attention in recent years, has many advantages, such as reducing the load on the cloud, not being affected by the communication environment, and providing excellent security. Therefore, many researchers have attempted to implement neural networks, which are representative of machine learning in edge computing. Neural networks can be divided into inference and learning parts; however, there has been little research on implementing the learning component in edge computing in contrast to the inference part. This is because learning requires more memory and computation than inference, easily exceeding the limit of resources available for edge computing. To overcome this problem, this research focuses on the optimizer, which is the heart of learning. In this paper, we introduce our new optimizer, hardware-oriented logarithmic momentum estimation (Holmes), which incorporates new perspectives not found in existing optimizers in terms of characteristics and strengths of hardware. The performance of Holmes was evaluated by comparing it with other optimizers with respect to learning progress and convergence speed. Important aspects of hardware implementation, such as memory and operation requirements are also discussed. The results show that Holmes is a good match for edge computing with relatively low resource requirements and fast learning convergence. Holmes will help create an era in which advanced machine learning can be realized on edge computing.

The Nyquist folding receiver (NYFR) is a novel analog-to-information architecture, which can achieve wideband receiving with a small amount of system resource. The NYFR uses a radio frequency (RF) non-uniform sampling to realize wideband receiving, and the practical RF non-uniform sample pulse train usually contains an aperture. Therefore, it is necessary to investigate the aperture impact on the NYFR output. In this letter, based on the NYFR output signal to noise ratio (SNR), the aperture impact on the NYFR is analyzed. Focusing on the aperture impact, the corresponding NYFR output signal power and noise power are given firstly. Then, the relation between the aperture and the output SNR is analyzed. In addition, the output SNR distribution containing the aperture is investigated. Finally, combing with a parameter estimation method, several simulations are conducted to prove the theoretical aperture impact.

Machine-to-Machine (M2M) communication plays a pivotal role in the evolution of Internet of Things (IoT). Cellular networks are considered to be a key enabler for M2M communications, which are originally designed mainly for Human-to-Human (H2H) communications. The introduction of M2M users will cause a series of problems to traditional H2H users, i.e., interference between various traffic. Resource allocation is an effective solution to these problems. In this paper, we consider a shared resource block (RB) and power allocation in an H2H/M2M coexistence scenario, where M2M users are subdivided into delay-tolerant and delay-sensitive types. We first model the RB-power allocation problem as maximization of capacity under Quality-of-Service (QoS) constraints of different types of traffic. Then, a learning framework is introduced, wherein a complex agent is built from simpler subagents, which provides the basis for distributed deployment scheme. Further, we proposed distributed Q-learning based autonomous RB-power allocation algorithm (DQ-ARPA), which enables the machine type network gateways (MTCG) as agents to learn the wireless environment and choose the RB-power autonomously to maximize M2M pairs' capacity while ensuring the QoS requirements of critical services. Simulation results indicates that with an appropriate reward design, our proposed scheme succeeds in reducing the impact of delay-tolerant machine type users on critical services in terms of SINR thresholds and outage ratios.

Fast switching speed, low power consumption, and good stability are some of the important properties of spin transfer torque assisted voltage controlled magnetic anisotropy magnetic tunnel junction (STT-assisted VCMA-MTJ) which makes the non-volatile full adder (NV-FA) based on it attractive for Internet of Things. However, the effects of process variations on the performances of STT-assisted VCMA-MTJ and NV-FA will be more and more obvious with the downscaling of STT-assisted VCMA-MTJ and the improvement of chip integration. In this paper, a more accurate electrical model of STT-assisted VCMA-MTJ is established on the basis of the magnetization dynamics and the process variations in film growth process and etching process. In particular, the write voltage is reduced to 0.7 V as the film thickness is reduced to 0.9 nm. The effects of free layer thickness variation (γtf) and oxide layer thickness variation (γtox) on the state switching as well as the effect of tunnel magnetoresistance ratio variation (β) on the sensing margin (SM) are studied in detail. Considering that the above process variations follow Gaussian distribution, Monte Carlo simulation is used to study the effects of the process variations on the writing and output operations of NV-FA. The result shows that the state of STT-assisted VCMA-MTJ can be switched under -0.3%≤γtf≤6% or -23%≤γtox≤0.2%. SM is reduced by 16.0% with β increases from 0 to 30%. The error rates of writing ‘0’ in the NV-FA can be reduced by increasing Vb1 or increasing positive Vb2. The error rates of writing ‘1’ can be reduced by increasing Vb1 or decreasing negative Vb2. The reduction of the output error rates can be realized effectively by increasing the driving voltage (Vdd).

With the popularity of smart devices, mobile crowdsensing, in which the crowdsensing platform gathers useful data from users of smart devices, e.g., smartphones, has become a prevalent paradigm. Various incentive mechanisms have been extensively adopted for the crowdsensing platform to incentivize users of smart devices to offer sensing data. Existing works have concentrated on rewarding smart-device users for their short term effort to provide data without considering the long-term factors of smart-device users and the quality of data. Our previous work has considered the quality of data of smart-device users by incorporating the long-term reputation of smart-device users. However, our previous work only considered a quality maximization problem with budget constraints on one location. In this paper, multiple locations are considered. Stackelberg game is utilized to solve a two-stage optimization problem. In the first stage, the crowdsensing platform allocates the budget to different locations and sets price as incentives for users to maximize the total data quality. In the second stage, the users make efforts to provide data to maximize its utility. Extensive numerical simulations are conducted to evaluate proposed algorithm.

Service chaining is attracting attention as a promising technology for providing a variety of network services by applying virtual network functions (VNFs) that can be instantiated on commercial off-the-shelf servers. The data transmission for each service chain has to satisfy the quality of service (QoS) requirements in terms of the loss probability and transmission delay, and hence the amount of resources for each VNF is expected to be sufficient for satisfying the QoS. However, the increase in the amount of VNF resources results in a high cost for improving the QoS. To reduce the cost of utilizing a VNF, sharing VNF instances through multiple service chains is an effective approach. However, the number of packets arriving at the VNF instance is increased, resulting in a degradation of the QoS. It is therefore important to select VNF instances shared by multiple service chains and to determine the amount of resources for the selected VNFs. In this paper, we propose a cost-effective service chain construction with a VNF sharing model. In the proposed method, each VNF is modeled as an M/M/1/K queueing model to evaluate the relationship between the amount of resources and the loss probability. The proposed method determines the VNF sharing, the VNF placement, the amount of resources for each VNF, and the transmission route of each service chain. For the optimization problem, these are applied according to our proposed heuristic algorithm. We evaluate the performance of the proposed method through a simulation. From the numerical examples, we show the effectiveness of the proposed method under certain network topologies.

In the conventional single-phase PWM rectifier, the sinusoidal fluctuating current and voltage on the grid side will generate power ripple with a doubled grid frequency which leads to a secondary ripple in the DC output voltage, and the switching frequency of the conventional model predictive control strategy is not fixed. In order to solve the above two problems, a control strategy for suppressing the secondary ripple based on the three-vector fixed-frequency model predictive current control is proposed. Taking the capacitive energy storage type single-phase PWM rectifier as the research object, the principle of its active filtering is analyzed and a model predictive control strategy is proposed. Simulation and experimental results show that the proposed strategy can significantly reduce the secondary ripple of the DC output voltage, reduce the harmonic content of the input current, and achieve a constant switching frequency.

In this study, a computational method is proposed for acoustic field analysis tasks that require lengthy observation times. The acoustic fields at a given observation time are obtained using a fast inverse Laplace transform with a finite-difference complex-frequency-domain. The transient acoustic field can be evaluated at arbitrary sampling intervals by obtaining the instantaneous acoustic field at the desired observation time using the proposed method.

The hybrid implicit-explicit single-field finite-difference time-domain (HIE-SF-FDTD) method based on the wave equation of electric field is reformulated in a concise matrix-vector form. The global approximation error of the scheme is discussed theoretically. The second-order convergence of the HIE-SF-FDTD is numerically verified.

This paper proposes a reference-clock-less quick-start-up CDR that resumes from a stand-by state only with a 4-bit preamble utilizing a phase generator with an embedded Time-to-Digital Converter (TDC). The phase generator detects 1-UI time interval by using its internal TDC and works as a self-tunable digitally-controlled delay line. Once the phase generator coarsely tunes the recovered clock period, then the residual time difference is finely tuned by a fine Digital-to-Time Converter (DTC). Since the tuning resolution of the fine DTC is matched by design with the time resolution of the TDC that is used as a phase detector, the fine tuning completes instantaneously. After the initial coarse and fine delay tuning, the feedback loop for frequency tracking is activated in order to improve Consecutive Identical Digits (CID) tolerance of the CDR. By applying the frequency tracking architecture, the proposed CDR achieves more than 100bits of CID tolerance. A prototype implemented in a 65nm bulk CMOS process operates at a 0.9-2.15Gbps continuous rate. It consumes 5.1-8.4mA in its active state and 42μA leakage current in its stand-by state from a 1.0V supply.

An asymmetric zero correlation zone (A-ZCZ) sequence set can be regarded as a special type of ZCZ sequence set, which consists of multiple sequence subsets. Each subset is a ZCZ sequence set, and have a common zero cross-correlation zone (ZCCZ) between sequences from different subsets. This paper supplements an existing construction of A-ZCZ sequence sets and further improves the research results. Besides, a new construction of A-ZCZ sequence sets is proposed by matrices transformation. The obtained sequence sets are optimal with respect to theoretical bound, and the parameters can be chosen more flexibly, such as the number of subsets and the lengths of ZCCZ between sequences from different subsets. Moreover, as the diversity of the orthogonal matrices and the flexibility of initial matrix, more A-ZCZ sequence sets can be obtained. The resultant sequence sets presented in this paper can be applied to multi-cell quasi-synchronous code-division multiple-access (QS-CDMA) systems, to eliminate the interference not only from the same cell but also from adjacent cells.

Image quality assessment (IQA) is a fundamental metric for image processing tasks (e.g., compression). With full-reference IQAs, traditional IQAs, such as PSNR and SSIM, have been used. Recently, IQAs based on deep neural networks (deep IQAs), such as LPIPS and DISTS, have also been used. It is known that image scaling is inconsistent among deep IQAs, as some perform down-scaling as pre-processing, whereas others instead use the original image size. In this paper, we show that the image scale is an influential factor that affects deep IQA performance. We comprehensively evaluate four deep IQAs on the same five datasets, and the experimental results show that image scale significantly influences IQA performance. We found that the most appropriate image scale is often neither the default nor the original size, and the choice differs depending on the methods and datasets used. We visualized the stability and found that PieAPP is the most stable among the four deep IQAs.