In synchronous LSI circuits, memory subsystems such as Flip-Flops and SRAMs are essential components and latches are the base elements of the common memory logics. In this paper, a stability analysis method for latches operating in a low voltage region is proposed. The butterfly curve of latches is a key for analyzing a retention failure of latches. This paper discusses a modeling method for retention stability and derives an analytical stability model for latches. The minimum supply voltage where the latches can operate with a certain yield can be accurately derived by a simple calculation using the proposed model. Monte-Carlo simulation targeting 65nm and 28nm process technology models demonstrates the accuracy and the validity of the proposed method. Measurement results obtained by a test chip fabricated in a 65nm process technology also demonstrate the validity. Based on the model, this paper shows some strategies for variation tolerant design of latches.

In this paper, we identify the tradeoff between security and reliability in the amplify-and-forward (AF) distributed beamforming (DBF) cooperative network with K untrusted relays. In particular, we derive the closed-form expressions for the connection outage probability (COP), the secrecy outage probability (SOP), the tradeoff relationship, and the secrecy throughput. Analytical and simulation results demonstrate that increasing K leads to the enhancement of the reliability performance, but the degradation of the security performance. This tradeoff also means that there exists an optimal K maximizing the secrecy throughput.

This letter considers a cognitive radio (CR) network where multiple secondary downlinks coexist with a primary network. The primary user (PU) is assumed to be protected by the interference outage constraint with only channel distribution information (CDI) being available at the secondary users (SUs). The power allocation problem to maximize the sum outage capacity of the SUs under the interference outage constraint and the transmit power constraint is investigated. Due to the difficulty in obtaining the optimal solution, we propose a heuristic power allocation algorithm based on the bisection search method that can guarantee to satisfy both the interference outage and the transmit power constraints. It is shown that the proposed algorithm converges fast and outperforms other reference algorithms.

This letter investigates the physical layer security for a buffer-aided underlay cooperative cognitive radio network in the presence of an eavesdropper, wherein, the relay is equipped with a buffer so that it can store packets received from the secondary source. To improve the secure performance of cognitive radio networks, we propose a novel cognitive secure link selection scheme which incorporates the instantaneous strength of the wireless links as well as the status of relay's buffer, the proposed scheme adapts the link selection decision on the strongest available link by dynamically switching between relay reception and transmission. Closed-form expressions of secrecy outage probability (SOP) for cognitive radio network is obtained based on the Markov chain. Numerical results demonstrate that the proposed scheme can significantly enhance the secure performance compared to the conventional relay selection scheme.

This paper presents a wide-input-voltage-range and high-efficiency boost converter that is assisted by a transformer-based oscillator. The oscillator can provide a sufficient amount of power to drive a following switched-inductor boost converter at low voltages. Moreover, it adopts a novel amplitude-regulation circuit (ARC) without using high power-consuming protective devices to suppress the expansion of the oscillation amplitude at high input voltages. Therefore, it can avoid over-voltage problems without sacrificing the power efficiency. Additionally, a power-down circuit (PDC) is implemented to turn off the oscillator, when the boost converter can be driven by its own output power, thus, eliminating the power consumption by the oscillator and improving the power efficiency. We implemented the ARC and the PDC with discrete components rather than one-chip integration for the proof of concept. The experimental results showed that the proposed circuit became possible to operate from an input voltage of 60mV to 3V while maintaining high peak efficiency up to 92%. To the best of our knowledge, this converter provides a wider input range in comparison with the previously-published converters. We are convinced that the proposed approach by inserting an appropriate start-up circuit in a commercial converter will be effective for rapid design proposals in order to respond promptly to customer needs as Internet of things (IoT) devices with energy harvester.

In this paper, a discrete particle swarm optimization method is proposed to solve the multi-objective task assignment problem in distributed environment. The objectives of optimization include the makespan for task execution and the budget caused by resource occupation. A two-stage approach is designed as follows. In the first stage, several artificial particles are added into the initialized swarm to guide the search direction. In the second stage, we redefine the operators of the discrete PSO to implement addition, subtraction and multiplication. Besides, a fuzzy-cost-based elite selection is used to improve the computational efficiency. Evaluation shows that the proposed algorithm achieves Pareto improvement in comparison to the state-of-the-art algorithms.

In this paper, we propose and analyze the opportunistic amplify-and-forward (AF) relaying scheme using antenna selection in conjunction with different adaptive transmission techniques over Rayleigh fading channels. In this scheme, the best antenna of a source and the best relay are selected for communication between the source and destination. Closed-form expressions for the outage probability and average symbol error rate (SER) are derived to confirm that increasing the number of antennas is the best option as compared with increasing the number of relays. We also obtain closed-form expressions for the average channel capacity under three different adaptive transmission techniques: 1) optimal power and rate adaptation; 2) constant power with optimal rate adaptation; and 3) channel inversion with a fixed rate. The channel capacity performance of the considered adaptive transmission techniques is evaluated and compared with a different number of relays and various antennas configurations for each adaptive technique. Our derived analytical results are verified through extensive Monte Carlo simulations.

This paper proposes a power supply voltage control technique, and demonstrates its effectiveness for eliminating the overkills and underkills due to the power supply characteristic difference between an automatic test equipment (ATE) and a practical operating environment of the DUT. The proposed method controls the static power supply voltage on the ATE system, so that the ATE can eliminate misjudges for the Pass or Fail of the DUT. The method for calculating the power supply voltage is also described. Experimental results show that the proposed method can eliminate 89% of overkills and underkills in delay fault testing with 105 real silicon devices. Limitations of the proposed method are also discussed.

The indexes of the degradation of C/N, ΔT/T and I/N, which can be converted from one to another, are used to evaluate the impact of interference on the satellite link. However, it is not suitable to intuitively understand how these parameters degrade the quality of services. In this paper, we propose to evaluate the impact of interference on the performance of BSS (Broadcasting Satellite Services) in terms of the increase rate of the outage time caused by the rain attenuation. Some calculation results are given for the 12GHz band BSS in Japan.

Near field communication (NFC) antennas are often lined with magnetic sheets to reduce performance degradation caused by nearby metal objects. Though amorphous sheets have a high permeability and are suitable magnetic sheets for lining, their magnetic loss is also high. Therefore, this paper suggests a technique of suppressing magnetic loss by modifying the shape of the sheet without changing its composition. The utility of the proposed technique was investigated in this study.

In this paper, we propose a multi-cell structure backscatter based wireless-powered communication network (WPCN) where a number of backscatter cells are locally separated, each containing a subset of users around a carrier emitter. The multi-cell structure backscatter based WPCN can be implemented in two ways, namely time-division multiplexing (TDM) and frequency-division multiplexing (FDM). Here users harvest energy from the carrier signal transmitted by the carrier emitter, and then transmit their own information in a passive way via the reflection of the carrier signal using frequency-shift keying modulation. We characterize the energy-free condition and the signal-to-noise ratio (SNR) outage zone in a backscatter based WPCN. Also, a backscatter based harvest-then-transmit protocol is adopted to maximize the sum-throughput of all users by optimally allocating time for energy harvesting and information transmission. Numerical results demonstrate that the backscatter based WPCN ensures an increased long-range coverage and a diminished SNR outage zone compared to conventional radio based WPCNs. Also, comparing the two types of multi-cell structure backscatter based WPCN, TDM within each backscatter cell and FDM across backscatter cells versus FDM within each backscatter cell and TDM across backscatter cells, numerical results confirm that which one yields a better performance.

This paper describes, for the first time, the circuit design considerations and measurements of core building blocks that support a 1.9-GHz-band (Band I) BiFET MMIC three-power-mode power amplifier (PA) for WCDMA handset applications. The blocks are a reference voltage (Vref) generator, a control logic circuit, and ESD protection circuits. Our proposed Vref-generator, based on a current-mirror topology, can successfully suppress Vref variation against threshold voltage (Vth) dispersion in the FET as well as current gain dispersion in the HBT. On-wafer measurements over several wafer lots show that the standard deviation of Vref is as small as 18 mV over a Vth dispersion range from -0.6 V to -1.0 V. As a result, the measured quiescent current dispersion in the HPM is also suppressed to less than 5.4 mA, despite the fact that the average quiescent current is relatively high, at 81.3 mA. Several simulations reveal that small decoupling capacitances of approximately 1 pF added to the gate control lines of RF switch FETs ensure stable operation of the control logic even if an undesired RF coupling is present between an RF signal path and the gate lines. An empirical and useful design approach for ESD protection using HBT base-collector diodes allows easy and precise estimation of the HBM ESD robustness. With the above building blocks, a 3 mm × 3 mm PA was designed and fabricated by an in-house BiFET process. Measurements conducted under the conditions of a 3.4-V supply voltage and a 1.95-GHz WCDMA modulated signal are as follows. The PA delivers a 28.3-dBm output power (Pout), a 28.2-dB power gain (Gp), and 40% PAE while restricting the ACLR1 to less than -42 dBc in the HPM. In the MPM, 17.4 dBm of Pout, 15.9 dB of Gp, and 25.3% of PAE are obtained, while in the LPM, the PA delivers 7 dBm of Pout, 11.7 dB of Gp, and 13.9% of PAE. The HBM ESD robustness is 2 kV.

This paper proposes and theoretically analyzes the performance of amplify-and-forward (AF) relaying free-space optical (FSO) systems using avalanche photodiode (APD) over atmospheric turbulence channels. APD is used at each relay node and at the destination for optical signal conversion and amplification. Both serial and parallel relaying configurations are considered and the subcarrier binary phase-shift keying (SC-BPSK) signaling is employed. Closed-form expressions for the outage probability and the bit-error rate (BER) of the proposed system are analytically derived, taking into account the accumulating amplification noise as well as the receiver noise at the relay nodes and at the destination. Monte-Carlo simulations are used to validate the theoretical analysis, and an excellent agreement between the analytical and simulation results is confirmed.

In this paper, we analyze two representative tree-based RFID anti-collision algorithms: the Query Tree protocol and the Binary Search algorithm. Based on the advantages and disadvantages of the two algorithms, we propose and evaluate two optimized anti-collision algorithms: the Optimized Binary Search, which performs better than the Query Tree Protocol with the same tag-side overhead, and the Optimized Binary Search with Multiple Collision Bits Resolution algorithm, which performs the best with an acceptable increase in tag-side processing overhead.

A CMOS bandgap reference circuit without resistors, which can successfully operate under 1V supply voltage is proposed. The improvement is realized by the technique of the voltage divider and a new current source. The most attractive merit is that the proposed circuit breaks the bottleneck of low supply voltage design caused by the constant bandgap voltage value (1.25V). Moreover, the temperature coefficient of the reference voltage Vref is improved by compensating the temperature dependence caused by the current source. The simulation results using a standard CMOS 0.18 um process show that the value of Vref can be achieved around 0.5 V with a minimum supply voltage of 0.85 V. Meanwhile, the temperature coefficient of the output voltage is only 3.5ppm/°C from 0 °C to 70 °C.

Named Data Networking (NDN) has emerged as an alternative to traditional IP-based networking for the achievement of Information-Centric Networking (ICN). Currently, most NDN is deployed over IP networks, but such an overlay deployment increases the transport network overhead due to the use of dual network control planes (NDN routing and IP routing). Software-Defined Networking (SDN) can be used to mitigate the network overhead by forwarding NDN packets without the use of IP routing. However, to deploy NDN over SDN, a variable NDN content name needs to be mapped to a fixed-size match field in an OpenFlow switch flow table. For efficient support of such a mapping task, we propose a new architecture that uses dual name for content: content name and Name Tag. The Name Tag is derived from the corresponding content name and is a legitimate IPv6 address. By using the proposed Name Tag, the SDN with an NDN control application can transport an IPv6 packet that encapsulates an NDN packet for an NDN name-based routing. We emulate the proposed architecture using Mininet and verify that it is feasible.

A striped inductor and its utilization of a voltage-controlled oscillator (VCO) are studied with the aim of suppressing phase noise degradation in K- and Ka-bands. The proposed striped inductor exhibits reduced series resistance in the high frequency region by increasing the cross-sectional peripheral length, as with the Litz wire, and the VCO of the striped inductor simultaneously exhibits a lower phase noise than that of the conventional inductor. Striped and conventional inductors and VCOs are designed and fabricated, and their use of K- and Ka-bands is measured. Results show that the Q factor and corner frequency of the striped inductor are approximately 1.3 and 1.6 times higher, respectively, than that of the conventional inductor. Moreover, the 1-MHz-offset phase noise of the striped inductor's VCO in the K- and Ka-bands was approximately 3.5 dB lower than that of the conventional inductor. In this study, a 65-nm standard CMOS process was used.

In this paper, we study the impact of imperfect channel information on an amplify-and-forward (AF)-based two-way relaying network (TWRN) with adaptive modulation which consists of two end-terminals and multiple relays. Specifically, we consider a single-relay selection scheme of the TWRN in the presence of outdated channel state information (CSI) and channel estimation errors. First, we choose the best relay based on outdated CSI, and perform adaptive modulation on both relaying paths with channel estimation errors. Then, we discuss the impact of the outdated CSI on the statistics of the signal-to-noise ratio (SNR) per hop. In addition, we formulate the end-to-end SNRs with channel estimation errors and offer statistic analyses in the presence of both the outdated CSI and channel estimation errors. Finally, we provide the performance analyses of the proposed TWRN with adaptive modulation in terms of average spectral efficiency, average bit error rate, and outage probability. Numerical examples are given to verify our obtained analytical results for various system conditions.

We propose a low-noise and low-power dynamic comparator with an offset calibration circuit for Low-Power ADCs. The proposed comparator equips the control circuit in order to switching the comparison accuracy and the current consumption. When high accuracy is not required, current consumption is reduced by allowing the noise increase. Compared with a traditional dynamic comparator, the proposed architecture reduced the current consumption to 78% at 100MHz operating and 1.8V supply voltage. Furthermore, the offset voltage is corrected with minimal current consumption by controlling the on/off operation of the offset calibration circuit.

An application of laser annealing process, which is used to form the shallow P-type Base junction for 20-V planar power MOSFETs (Metal Oxide Semiconductor Field Effect Transistors) is proposed. We demonstrated that the fabricated devices integrated with laser annealing process have superior electrical characteristics than those fabricated according to the standard process. Moreover, the threshold voltage variation of the devices applied by the new annealing process is effectively suppressed. This is due to that a uniform impurity distribution at the channel region is achieved by adopting laser annealing. Laser annealing technology can be applied as a reliable, effective, and advantageous process for the low-voltage power MOSFETs.