In this paper, a Dynamic Voltage and Frequency Management (DVFM) scheme introduced in a microprocessor for handheld devices with wideband embedded DRAM is reported. Our DVFM scheme reduces the power consumption effectively by cooperation of the autonomous clock frequency control and the adaptive supply voltage control. The clock frequency is controlled using hardware activity information to determine the minimum value required by the current processor load. This clock frequency control is realized without special power management software. The supply voltage is controlled according to the delay information provided from a delay synthesizer circuit, which consists of three programmable delay components, gate delay, RC delay and a rise/fall delay. The delay synthesizer circuit emulates the critical-path delay within 4% voltage accuracy over the full range of process deviation and voltage. This accurate tracking ability realizes the supply voltage scaling according to the fluctuation of the LSI's characteristic caused by the temperature and process deviation. The DVFM contributes not only the dynamic power reduction, but also the leakage power reduction. This microprocessor, fabricated in 0.18 µm CMOS embedded DRAM technology achieves 82% power reduction in a Personal Information Management scheduler (PIM) application and 40% power reduction in a MPEG4 movie playback application. As process technology shrinks, the DVFM scheme with leakage power compensation effect will become more important realizing in high-performance and low-power mobile consumer applications.

Dynamic power supply noise measurements with resolutions of 100 ps and 100 µV for 100 ns and 1 V ranges are performed at various operating frequencies up to 400 MHz on multiple points in a low power register file and SRAM for product chips by using on-chip noise detectors. The measurements show that the noises are clearly emphasized in frequency domains by the interaction of circuit operations and bias network's AC transfers. A proposed design methodology that covers a fast SPICE simulator and parasitic extractors can predict dynamic noises from power supplies, ground, well, and substrate interactions to provide robustness to the design of low power body bias control circuitry.

A memory address allocation method for digital signal processors of indirect addressing with indexed auto-modification is proposed. At first, address auto-modification amounts for a given program are analyzed. And then, address allocation of program variables are moved and shifted so that both indexed and simple auto-modifications are effectively exploited. For further reduction in overhead codes, a memory address allocation method coupled with computational reordering is proposed. The proposed methods are applied to the existing compiler, and generated codes prove their effectiveness.

We report tunable optical devices based on fiber Bragg gratings (FBGs), whose filtering characteristics are controlled by strain distributions. These devices include a widely wavelength tunable filter, a tunable group-velocity dispersion (GVD) compensator, a tunable dispersion slope (DS) compensator, and a variable-bandwidth optical add/drop multiplexer (OADM), which will play important roles for next-generation reconfigurable optical networks.

The add/drop wavelength filter is an essential component in the new-generation photonic network. Microring resonator filters using high index contrast (HIC) optical waveguides are recently attracting attention as add/drop filters owing to their compactness, functionality such as dispersion compensation, and ease of filter synthesis. In particular, the vertically coupled microring resonator (VCMRR) filter is highly suited for the dense, large-scale integration of filter circuits. In this review, the fundamental characteristics advantageous to the add/drop filter nodes are introduced, and the recent progress in the development of vertically coupled microring resonator filters achieved mainly by the author's group is described.

This paper presents the analysis of the stopping maneuver of the human driver by using a new three-dimensional driving simulator that uses CAVE, which provides stereoscopic immersive vision. First of all, the difference in the driving behavior between 3D and 2D virtual environments is investigated. Secondly, a GMDH is applied to the measured data in order to build a mathematical model of driving behavior. From the obtained model, it is found that the acceleration information has less importance in stopping maneuver under the 2D and 3D environments.

An event-driven sensor network composed of a large number of sensor nodes has been widely studied. A sensor node sends packets to a sink when the node detects an event. For the sink to receive packets it fails to acquire, the sink must send re-transmission requests to the sensor node. To send the requests to the sensor node using unicast, the network address of the sensor node is required to distinguish the sensor node from others. Since it is difficult to allocate the address manually to a number of nodes, a reasonable option is to use existing address autoconfiguration methods. However, the methods waste the limited energy of the sensor nodes due to using a number of control messages to allocate a permanent address to every node. In this paper, we propose an energy-efficient address autoconfiguration method for the event-driven sensor network. The proposed method allocates a temporary address only to a sensor node which detects an event, on an on-demand basis. By performing simulation studies, we evaluated the proposed method and compared it with one of the existing methods based on the number of control messages for the address allocation. The results show that the number of control messages of the proposed method is small compared to that of the existing method. We also evaluated the process time overhead of the proposed method using the implemented system. Although the proposed method has little extra overhead, the results show the processing time is short enough for practical use.

This article describes a large bandwidth and low distortion line driver in a 0.35-µm CMOS process. The line driver drives a 75 Ω resistive load. Its power consumption is 140 mW from a 3.3 V supply. It has a relatively high -3 dB bandwidth (260 MHz) with good phase margin of about 70 degrees. It shows very low THD (-74.5 dB) when drives the load with a 3.3 V peak to peak sine wave at 10 MHz. This architecture reduces the distortion by locating the input differential pair inside the feedback loop and eliminating the distortion of the feedback transistors, which is dominant source of distortion at high frequencies. Thus, it improves the linearity of the output voltage in comparison with previous designs.

The facility layout problem is one of the most fundamental quadratic assignment problems in operations research. In this paper, we present an improved genetic algorithm for solving the facility layout problem. In our computational model, we propose several improvements to the basic genetic procedures including conditional crossover and mutation. The performance of the proposed method is evaluated on some benchmark problems. Computational results showed that the improved genetic algorithm is capable of producing high-quality solutions.

This paper describes two circuit techniques useful for the design of high density and high speed low cost double data rate memories. One is a highly flexible row and column redundancy circuit which allows the division of flexible row redundancy unit into multiple column redundancy unit for higher flexibility, with a new test mode circuit which enables the use of the finer pitch laser fuse. Another is a compact read data path which allows the smooth data flow without wait time in the high frequency operation with less area penalty. These circuit techniques achieved the compact chip size with the cell efficiency of 60.6% and the high bandwidth of 400 MHz operation with CL=2.5.

The role of hydrogen in the Si film during excimer laser annealing (ELA) has been successfully studied by using a novel sample structure, which is stacked by a-Si film and SiN film. Hydrogen contents in the Si films during ELA are changed by preparing samples with hydrogen content of 2.3-8.2 at.% in the SiN films with a use of catalytic (Cat)-CVD method. For the low concentration of hydrogens in the Si film, the grain size increases by decreasing hydrogen concentration in the Si film, and the internal stress of the film decreases as increasing the shot number. For the high concentration of hydrogens in the Si film, hydrogen burst was observed at 500 mJ/cm2 and the dependence of the internal stress on the shot number becomes weak even at 318 mJ/cm2. These phenomena can be understood basically using the secondary grain growth mechanism, which we have proposed.

We consider delivering interactive dramas. A viewer interacts with a contents provider by answering multiple-choice questions and the answers to these questions influence the plot of delivered story. All possible plots can be represented by a directed graph such that every plot corresponds to some path of the graph. A delivery should be controlled according to the directed graph such that each viewer's history of answered choices forms a path of the graph. On the other hand, because some character of a viewer is known to a contents provider from his history of choices, a viewer tries to prevent even a contents provider from linking choices made by him. In this paper, we introduce unlinkable delivery for an interactive drama and propose such a delivery system for interactive dramas that viewer's choices are unlinkable and delivery is controlled according to the directed graph.

Authentication server based security protocols are mainly used for enhancing security of wireless networks. In this paper, we specify RADIUS security protocol in wireless networks with Casper and CSP, and then verify their security properties such as secrecy and authentication using FDR. We also show that RADIUS protocol is vulnerable to the man-in-the-middle attack. In addition, we discuss its security weakness and potential countermeasures related with RADIUS. Finally, we fix it and propose a modified RADIUS protocol against the man-in-the-middle attack.

A plane graph is a planar graph with a fixed embedding. In a no-bend orthogonal drawing of a plane graph, each vertex is drawn as a point and each edge is drawn as a single horizontal or vertical line segment. A planar graph is said to have a no-bend orthogonal drawing if at least one of its plane embeddings has a no-bend orthogonal drawing. In this paper we consider a class of planar graphs, called subdivisions of planar triconnected cubic graphs, and give a linear-time algorithm to examine whether such a planar graph G has a no-bend orthogonal drawing and to find one if G has.

This paper compares a stub and a decoupling capacitor for power supply noise reduction. A quarter-length stub attached to the power supply line of an LSI chip works as a band-eliminate filter, and suppresses the power supply bounce of the designed frequency. The conditions where the stub is more effective than the same-area decoupling capacitor are clarified. The stub will work more efficiently and on-chip integration will be possible on high frequency operation LSIs.

In this study, we propose an object-based multimedia model for specifying the QoS (quality of service) requirements, such as the maximum data-dropping rate or the maximum data-delay rate. We also present a resource allocation model, called the net-profit model, in which the satisfaction of user's QoS requirements is measured by the benefit earned by the system. Based on the net-profit model, the system is rewarded if it can allocate enough resources to a multimedia delivery request and fulfill the QoS requirements specified by the user. At the same time, the system is penalized if it cannot allocate enough resources to a multimedia delivery request. We first investigate the problem of how to allocate resources efficiently, so that the QoS satisfaction is maximized. However, the net-profit may be distributed unevenly among the multimedia delivery requests. Thus, the second problem discusses how to allocate the resource efficiently so that the net-profit difference is minimized between any two multimedia requests. A dynamic programming based algorithm is proposed to find such an optimal solution with the minimum net-profit differences.

In this paper, we propose an MPEG-2 TS encryption and decryption scheme which can support MPEG-2 TS streaming, and a key management scheme which can provide secure delivery of the key used to encrypt MPEG-2 TS from the package server to DRM clients in a secure manner. The key management scheme protects the key not only from purchasers but also among the other principals who manage the distribution servers and license servers. The proposed scheme can protect from attacks over a network since a pre-encrypted MPEG-2 TS is sent by a streaming server and only DRM clients can decrypt the streamed MPEG-2 TS. An MPEG-2 TS streaming server can send the encrypted stream without modifying it and degrading its performance because MPEG-2 TS is encrypted but compliant to the MPEG-2 TS format. The processing time to decrypt a streamed MPEG-2 TS in client systems is minimized to guarantee the quality of streaming.

In order to exploit the benefits of soft handoff, finding good values of handoff control parameters is important. In cellular system specifications such as IS-95C and WCDMA, handoff decision algorithm includes signal strength averaging and drop timer in addition to hysteresis. This paper analyzes the effects of signal strength averaging and drop timer and their performance tradeoffs. Because averaging and drop timer are both based on time delay, one may expect that they have similar impact on soft handoff performance. The results show that the effects of averaging and drop timer are rather similar and closely connected in terms of reducing the signaling overhead. However, they have different impacts on resource usage and diversity gain of the system.

In IP-based mobile networks, a few of mobility agents (e.g., home agent, foreign agent, etc.) are used for mobility management. Recently, Hierarchical Mobile IPv6 (HMIPv6) was proposed to reduce signaling overhead and handoff latency occurred in Mobile IPv6. In HMIPv6, a new mobility agent, called mobility anchor point (MAP), is deployed in order to handle binding update procedures locally. However, the MAP can be a single point of performance bottleneck when there are a lot of mobile node (MNs) performing frequent local movements. This is because the MAP takes binding update procedures as well as data packet tunneling. Therefore, it is required to control the number of MNs serviced by a single MAP. In this paper, we propose a load control scheme at the MAP utilizing an admission control algorithm. We name the proposed load control scheme proactive load control scheme to distinct from the existing load control schemes in cellular networks. In terms of admission control, we use the cutoff priority scheme. We develop Markov chain models for the proactive load control scheme and evaluate the ongoing MN dropping and the new MN blocking probabilities. As a result, the proactive load control scheme can reduce the ongoing MN dropping probability while keeping the new MN blocking probability to a reasonable level.

Thin film of polyurethane having metal complex was prepared by vapor deposition polymerization of bis (5,8-dihydroxyquinoline) zinc (ZnHq2) and 4, 4'-diphenylmethane diisocyanate monomers. The film was applied for the electron-transporting emissive layer of the organic light emitting diode. The deposition-polymerized film was found to give higher quantum efficiency of luminescence than the ZnHq2 monomer film.