Bandpass filters (BPFs) are very important to extract target signals and eliminate noise from the received signals. A BPF of which frequency characteristics is a sum of Gaussian functions is called the Gaussian mixture BPF (GMBPF). In this research, we propose to implement the GMBPF approximately by the sum of several frequency components of the sliding Fourier transform (SFT) or the attenuated SFT (ASFT). Because a component of the SFT/ASFT can be approximately realized using the finite impulse response (FIR) recursive filters, its calculation complexity does not depend on the length of the impulse response. The property makes GMBPF ideal for narrow bandpass filtering applications. We conducted experiments to demonstrate the advantages of the proposed GMBPF over FIR filters designed by a MATLAB function with regard to the computational complexity.

This paper proposes an accurate and efficient method to calculate probability distributions of pulse-shaped complex signals. We show that the distribution over the in-phase and quadrature-phase (I/Q) complex plane is obtained by a recursive probability mass function of the accumulator for a pulse-shaping filter. In contrast to existing analytical methods, the proposed method provides complex-plane distributions in addition to instantaneous power distributions. Since digital signal processing generally deals with complex amplitude rather than power, the complex-plane distributions are more useful when considering digital signal processing. In addition, our approach is free from the derivation of signal-dependent functions. This fact results in its easy application to arbitrary constellations and pulse-shaping filters like Monte Carlo simulations. Since the proposed method works without numerical integrals and calculations of transcendental functions, the accuracy degradation caused by floating-point arithmetic is inherently reduced. Even though our method is faster than Monte Carlo simulations, the obtained distributions are more accurate. These features of the proposed method realize a novel framework for evaluating the characteristics of pulse-shaped signals, leading to new modulation, predistortion and peak-to-average power ratio (PAPR) reduction schemes.

This paper presents a quantized gradient descent algorithm for distributed nonconvex optimization in multiagent systems that takes into account the bandwidth limitation of communication channels. Each agent encodes its estimation variable using a zoom-in parameter and sends the quantized intermediate variable to the neighboring agents. Then, each agent updates the estimation by decoding the received information. In this paper, we show that all agents achieve consensus and their estimated variables converge to a critical point in the optimization problem. A numerical example of a nonconvex logistic regression shows that there is a trade-off between the convergence rate of the estimation and the communication bandwidth.

In this paper, we study the properties of the sum-of-squares indicator of vectorial Boolean functions. Firstly, we give the upper bound of $sum_{uin mathbb{F}_2^n,vin mathbb{F}_2^m}mathcal{W}_F^3(u,v)$. Secondly, based on the Walsh-Hadamard transform, we give a secondary construction of vectorial bent functions. Further, three kinds of sum-of-squares indicators of vectorial Boolean functions are defined by autocorrelation function and the lower and upper bounds of the sum-of-squares indicators are derived. Finally, we study the sum-of-squares indicators with respect to several equivalence relations, and get the sum-of-squares indicator which have the best cryptographic properties.

The configurable Ring oscillator Physical unclonable function (CRO PUF) is the newly proposed strong PUF based on classic RO PUF, which can generate exponential Challenge-Response Pairs (CRPs) and has good uniqueness and reliability. However, existing proposals have low hardware utilization and vulnerability to modeling attacks. In this paper, we propose a Novel Configurable Dual State (CDS) PUF with lower overhead and higher resistance to modeling attacks. This structure can be flexibly transformed into RO PUF and TERO PUF in the same topology according to the parity of the Hamming Weight (HW) of the challenge, which can achieve 100% utilization of the inverters and improve the efficiency of hardware utilization. A feedback obfuscation mechanism (FOM) is also proposed, which uses the stable count value of the ring oscillator in the PUF as the updated mask to confuse and hide the original challenge, significantly improving the effect of resisting modeling attacks. The proposed FOM-CDS PUF is analyzed by building a mathematical model and finally implemented on Xilinx Artix-7 FPGA, the test results show that the FOM-CDS PUF can effectively resist several popular modeling attack methods and the prediction accuracy is below 60%. Meanwhile it shows that the FOM-CDS PUF has good performance with uniformity, Bit Error Rate at different temperatures, Bit Error Rate at different voltages and uniqueness of 53.68%, 7.91%, 5.64% and 50.33% respectively.

At a flash memory, each stored data frame is protected by error correction codes (ECC) such as Bose-Chaudhuri-Hocquenghem (BCH) codes from random errors. Exclusive-OR (XOR) based erasure codes like RAID-5 have also been employed at the flash memory to protect from memory block defects. Conventionally, the ECC and erasure codes are used separately since their target errors are different. Due to recent aggressive technology scaling, additional error correction capability for random errors is required without adding redundancy. We propose an algorithm to improve error correction capability by using XOR parity with a simple counter that counts the number of unreliable bits in the XOR stripe. We also propose to apply Chase decoding to the proposed algorithm. The counter makes it possible to reduce the false correction and execute the efficient Chase decoding. We show that combining the proposed algorithm with Chase decoding can significantly improve the decoding performance.

The design of codes for distributed storage systems that protects from node failures has been studied for years, and locally repairable code (LRC) is such a method that gives a solution for fast recovery of node failures. Linear complementary dual code (LCD code) is useful for preventing malicious attacks, which helps to secure the system. In this paper, we combine LRC and LCD code by integration of enhancing security and repair efficiency, and propose some techniques for constructing LCD codes with their localities determined. On the basis of these methods and inheriting previous achievements of optimal LCD codes, we give optimal or near-optimal [n, k, d;r] LCD codes for k≤6 and n≥k+1 with relatively small locality, mostly r≤3. Since all of our obtained codes are distance-optimal, in addition, we show that the majority of them are r-optimal and the other 63 codes are all near r-optimal, according to CM bound.

Orthogonal frequency division multiplexing (OFDM) is very sensitive to the carrier frequency offset (CFO). The CFO estimation precision heavily makes impacts on the OFDM performance. In this paper, a new Bayesian learning-assisted joint CFO tracking and channel impulse response estimation is proposed. The proposed algorithm is modified from a Bayesian learning-assisted estimation (BLAE) algorithm in the literature. The BLAE is expectation-maximization (EM)-based and displays the estimator mean square error (MSE) lower than the Cramer-Rao bound (CRB) when the CFO value is near zero. However, its MSE value may increase quickly as the CFO value goes away from zero. Hence, the CFO estimator of the BLAE is replaced to solve the problem. Originally, the design criterion of the single-time-sample (STS) CFO estimator in the literature is maximum likelihood (ML)-based. Its MSE performance can reach the CRB. Also, its CFO estimation range can reach the widest range required for a CFO tracking estimator. For a CFO normalized by the sub-carrier spacing, the widest tracking range required is from -0.5 to +0.5. Here, we apply the STS CFO estimator design method to the EM-based Bayesian learning framework. The resultant Bayesian learning-assisted STS algorithm displays the MSE performance lower than the CRB, and its CFO estimation range is between ±0.5. With such a Bayesian learning design criterion, the additional channel noise power and power delay profile must be estimated, as compared with the ML-based design criterion. With the additional channel statistical information, the derived algorithm presents the MSE performance better than the CRB. Two frequency-selective channels are adopted for computer simulations. One has fixed tap weights, and the other is Rayleigh fading. Comparisons with the most related algorithms are also been provided.

As an efficient classical machine learning classifier, the Softmax regression uses cross-entropy as the loss function. Therefore, it has high accuracy in classification. However, when there is inconsistency between the distribution of training samples and test samples, the performance of traditional Softmax regression models will degrade. A transfer discriminant Softmax regression model called Transfer Discriminant Softmax Regression with Weighted MMD (TDS-WMMD) is proposed in this paper. With this method, the Weighted Maximum Mean Divergence (WMMD) is introduced into the objective function to reduce the marginal distribution and conditional distribution between domains both locally and globally, realizing the cross domain transfer of knowledge. In addition, to further improve the classification performance of the model, Linear Discriminant Analysis (LDA) is added to the label iteration refinement process to improve the class separability of the designed method by keeping the same kind of samples together and the different kinds of samples repeling each other. Finally, after conducting classification experiments on several commonly used public transfer learning datasets, the results verify that the designed method can enhance the knowledge transfer ability of the Softmax regression model, and deliver higher classification performance compared with other current transfer learning classifiers.

The existing literature focuses on the applications of fast filter bank due to its excellent frequency responses with low complexity. However, the topic is not addressed related to the general transfer function expressions of the corresponding subfilters for a specific channel. To do this, in this paper, general closed-form transfer function expressions for fast filter bank are derived. Firstly, the cascaded structure of fast filter bank is modelled by a binary tree, with which the index of the subfilter at each stage within the channel can be determined. Then the transfer functions for the two outputs of a subfilter are expressed in a unified form. Finally, the general closed-form transfer functions for the channel and its corresponding subfilters are obtained by variables replacement if the prototype lowpass filters for the stages are given. Analytical results and simulations verify the general expressions. With such closed-form expressions lend themselves easily to analysis and direct computation of the transfer functions and the frequency responses without the structure graph.

The ionospheric clutter in High Frequency Surface Wave Radar (HFSWR) is the reflection of electromagnetic waves from the ionosphere back to the receiver, which should be suppressed as much as possible for the primary purpose of target detection in HFSWR. However, ionospheric clutter contains vast quantities of ionospheric state information. By studying ionospheric clutter, some of the relevant ionospheric parameters can be inferred, especially during the period of typhoons, when the ionospheric state changes drastically affected by typhoon-excited gravity waves, and utilizing the time-frequency characteristics of ionospheric clutter at typhoon time, information such as the trend of electron concentration changes in the ionosphere and the direction of the typhoon can be obtained. The results of the processing of the radar data showed the effectiveness of this method.

The low-hit-zone (LHZ) frequency hopping sequence (FHS) sets are widely applicable in quasi-synchronous frequency hopping multiple-access (QS-FHMA) systems. In order to reduce mutual interference (MI) in the zone around the signal origin between different users, we recommend the LHZ FHS set instead of the conventional FHS set. In this letter, we propose a design of LHZ FHS sets via interleaving techniques. The obtained sequences can be confirmed that they are near-optimal in relation to the Peng-Fan-Lee bound.